Vlv2DeviceRefCodePkg/AcpiTablesPCAT/Pch.asl

   1 /**************************************************************************;
   2 ;*                                                                        *;
   3 ;*                                                                        *;
   4 ;*    Intel Corporation - ACPI Reference Code for the Baytrail            *;
   5 ;*    Family of Customer Reference Boards.                                *;
   6 ;*                                                                        *;
   7 ;*                                                                        *;
   8 ;*    Copyright (c) 2012  - 2014, Intel Corporation. All rights reserved    *;
   9 ;
  10 ; This program and the accompanying materials are licensed and made available under
  11 ; the terms and conditions of the BSD License that accompanies this distribution.
  12 ; The full text of the license may be found at
  13 ; http://opensource.org/licenses/bsd-license.php.
  14 ;
  15 ; THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
  16 ; WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
  17 ;
  18 ;*                                                                        *;
  19 ;*                                                                        *;
  20 ;**************************************************************************/
  21
  22
  23 Scope(\)
  24 {
  25   //
  26   // Define VLV ABASE I/O as an ACPI operating region. The base address
  27   // can be found in Device 31, Registers 40-43h.
  28   //
  29   OperationRegion(PMIO, SystemIo, \PMBS, 0x46)
  30   Field(PMIO, ByteAcc, NoLock, Preserve)
  31   {
  32     ,      8,
  33     PWBS,  1,       // Power Button Status
  34     Offset(0x20),
  35     ,      13,
  36     PMEB,  1,     // PME_B0_STS
  37     Offset(0x42),     // General Purpose Control
  38     ,      1,
  39     GPEC,  1
  40   }
  41   Field(PMIO, ByteAcc, NoLock, WriteAsZeros)
  42   {
  43     Offset(0x20),     // GPE0 Status
  44     ,      4,
  45     PSCI,  1,       // PUNIT SCI Status
  46     SCIS,  1        // GUNIT SCI Status
  47   }
  48
  49
  50
  51   //
  52   // Define a Memory Region that will allow access to the PMC
  53   // Register Block.  Note that in the Intel Reference Solution, the PMC
  54   // will get fixed up dynamically during POST.
  55   //
  56   OperationRegion(PMCR, SystemMemory, \PFDR, 0x04)// PMC Function Disable Register
  57   Field(PMCR,DWordAcc,Lock,Preserve)
  58   {
  59     Offset(0x00),   //  Function Disable Register
  60     L10D,  1,         //  (0) LPIO1 DMA Disable
  61     L11D,  1,         //  (1) LPIO1 PWM #1 Disable
  62     L12D,  1,         //  (2) LPIO1 PWM #2 Disable
  63     L13D,  1,         //  (3) LPIO1 HS-UART #1 Disable
  64     L14D,  1,         //  (4) LPIO1 HS-UART #2 Disable
  65     L15D,  1,         //  (5) LPIO1 SPI Disable
  66     ,          2,     //  (6:7) Reserved
  67     SD1D,  1,         //  (8) SCC SDIO #1 Disable
  68     SD2D,  1,         //  (9) SCC SDIO #2 Disable
  69     SD3D,  1,         //  (10) SCC SDIO #3 Disable
  70     HSID,  1,         //  (11)
  71     HDAD,  1,         //  (12) Azalia Disable
  72     LPED,  1,         //  (13) LPE Disable
  73     OTGD,  1,         //  (14) USB OTG Disable
  74     ,          1,     //  (15) USH Disable
  75     ,          1,     //  (16)
  76     ,          1,     //  (17)
  77     ,          1,     //  (18) USB Disable
  78     ,          1,     //  (19) SEC Disable
  79     RP1D,  1,         //  (20) Root Port 0 Disable
  80     RP2D,  1,         //  (21) Root Port 1 Disable
  81     RP3D,  1,         //  (22) Root Port 2 Disable
  82     RP4D,  1,         //  (23) Root Port 3 Disable
  83     L20D,  1,         //  (24) LPIO2 DMA Disable
  84     L21D,  1,         //  (25) LPIO2 I2C #1 Disable
  85     L22D,  1,         //  (26) LPIO2 I2C #2 Disable
  86     L23D,  1,         //  (27) LPIO2 I2C #3 Disable
  87     L24D,  1,         //  (28) LPIO2 I2C #4 Disable
  88     L25D,  1,         //  (29) LPIO2 I2C #5 Disable
  89     L26D,  1,         //  (30) LPIO2 I2C #6 Disable
  90     L27D,  1          //  (31) LPIO2 I2C #7 Disable
  91   }
  92
  93
  94   OperationRegion(CLKC, SystemMemory, \PCLK, 0x18)// PMC CLK CTL Registers
  95   Field(CLKC,DWordAcc,Lock,Preserve)
  96   {
  97     Offset(0x00),   //  PLT_CLK_CTL_0
  98     CKC0, 2,
  99     CKF0, 1,
 100     ,     29,
 101     Offset(0x04),   //  PLT_CLK_CTL_1
 102     CKC1, 2,
 103     CKF1, 1,
 104     ,     29,
 105     Offset(0x08),   //  PLT_CLK_CTL_2
 106     CKC2,  2,
 107     CKF2, 1,
 108     ,     29,
 109     Offset(0x0C),   //  PLT_CLK_CTL_3
 110     CKC3,  2,
 111     CKF3, 1,
 112     ,     29,
 113     Offset(0x10),   //  PLT_CLK_CTL_4
 114     CKC4,  2,
 115     CKF4, 1,
 116     ,     29,
 117     Offset(0x14),   //  PLT_CLK_CTL_5
 118     CKC5,  2,
 119     CKF5, 1,
 120     ,     29,
 121   }
 122 } //end Scope(\)
 123
 124 scope (\_SB)
 125 {
 126   Device(LPEA)
 127   {
 128     Name (_ADR, 0)
 129     Name (_HID, "80860F28")
 130     Name (_CID, "80860F28")
 131     //Name (_CLS, Package (3) {0x04, 0x01, 0x00})
 132     Name (_DDN, "Intel(R) Low Power Audio Controller - 80860F28")
 133     Name (_SUB, "80867270")
 134     Name (_UID, 1)
 135     Name (_DEP, Package() {\_SB.I2C2.RTEK})
 136     Name(_PR0,Package() {PLPE})
 137
 138     Method (_STA, 0x0, NotSerialized)
 139     {
 140       If (LAnd(LAnd(LEqual(LPEE, 2), LEqual(LPED, 0)), LEqual(OSEL, 0)))
 141       {
 142         Return (0xF)
 143       }
 144       Return (0x0)
 145     }
 146
 147     Method (_DIS, 0x0, NotSerialized)
 148     {
 149       //Add a dummy disable function
 150     }
 151
 152     Name (RBUF, ResourceTemplate ()
 153       {
 154         Memory32Fixed (ReadWrite, 0xFE400000, 0x00200000, BAR0)  // MMIO 1 - LPE MMIO
 155         Memory32Fixed (ReadWrite, 0xFE830000, 0x00001000, BAR1)  // MMIO 2 - Shadowed PCI Config Space
 156         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00100000, BAR2)  // LPE Memory Bar Allocate during post
 157         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {24}
 158         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {25}
 159         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {26}
 160         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {27}
 161         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {28}
 162         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {29}
 163         GpioInt(Edge, ActiveBoth, ExclusiveAndWake, PullNone, 0,"\\_SB.GPO2") {28} //  Audio jack interrupt
 164       }
 165     )
 166
 167     Method (_CRS, 0x0, NotSerialized)
 168     {
 169       CreateDwordField(^RBUF, ^BAR0._BAS, B0BA)
 170       Store(LPE0, B0BA)
 171       CreateDwordField(^RBUF, ^BAR1._BAS, B1BA)
 172       Store(LPE1, B1BA)
 173       CreateDwordField(^RBUF, ^BAR2._BAS, B2BA)
 174       Store(LPE2, B2BA)
 175       Return (RBUF)
 176     }
 177
 178     OperationRegion (KEYS, SystemMemory, LPE1, 0x100)
 179     Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
 180     {
 181       Offset (0x84),
 182       PSAT,   32
 183     }
 184
 185     PowerResource(PLPE, 0, 0)   // Power Resource for LPEA
 186     {
 187       Method (_STA)
 188       {
 189         Return (1)      // Power Resource is always available.
 190       }
 191
 192       Method (_ON)
 193       {
 194         And(PSAT, 0xfffffffC, PSAT)
 195         OR(PSAT, 0X00000000, PSAT)
 196       }
 197
 198       Method (_OFF)
 199       {
 200         OR(PSAT, 0x00000003, PSAT)
 201         OR(PSAT, 0X00000000, PSAT)
 202       }
 203     } // End PLPE
 204   } // End "Low Power Engine Audio"
 205
 206   Device(LPA2)
 207   {
 208     Name (_ADR, 0)
 209     Name (_HID, "LPE0F28")  // _HID: Hardware ID
 210     Name (_CID, "LPE0F28")  // _CID: Compatible ID
 211     Name (_DDN, "Intel(R) SST Audio - LPE0F28")  // _DDN: DOS Device Name
 212     Name (_SUB, "80867270")
 213     Name (_UID, 1)
 214     Name (_DEP, Package() {\_SB.I2C2.RTEK})
 215     Name(_PR0,Package() {PLPE})
 216
 217     Method (_STA, 0x0, NotSerialized)
 218     {
 219       If (LAnd(LAnd(LEqual(LPEE, 2), LEqual(LPED, 0)), LEqual(OSEL, 1)))
 220       {
 221         Return (0xF)
 222       }
 223       Return (0x0)
 224     }
 225
 226     Method (_DIS, 0x0, NotSerialized)
 227     {
 228       //Add a dummy disable function
 229     }
 230
 231     Name (RBUF, ResourceTemplate ()
 232       {
 233         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00100000, BAR2)  // LPE Memory Bar Allocate during post
 234         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00000100, SHIM)
 235         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00001000, MBOX)
 236         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00014000, IRAM)
 237         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00028000, DRAM)
 238         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {29}
 239         Memory32Fixed (ReadWrite, 0xFE830000, 0x00001000, BAR1)  // MMIO 2 - Shadowed PCI Config Space
 240       }
 241     )
 242
 243     Method (_CRS, 0x0, NotSerialized)
 244     {
 245       CreateDwordField(^RBUF, ^SHIM._BAS, SHBA)
 246       Add(LPE0, 0x140000, SHBA)
 247       CreateDwordField(^RBUF, ^MBOX._BAS, MBBA)
 248       Add(LPE0, 0x144000, MBBA)
 249       CreateDwordField(^RBUF, ^IRAM._BAS, IRBA)
 250       Add(LPE0, 0xC0000, IRBA)
 251       CreateDwordField(^RBUF, ^DRAM._BAS, DRBA)
 252       Add(LPE0, 0x100000, DRBA)
 253       CreateDwordField(^RBUF, ^BAR1._BAS, B1BA)
 254       Store(LPE1, B1BA)
 255       CreateDwordField(^RBUF, ^BAR2._BAS, B2BA)
 256       Store(LPE2, B2BA)
 257       Return (RBUF)
 258     }
 259
 260     OperationRegion (KEYS, SystemMemory, LPE1, 0x100)
 261     Field (KEYS, DWordAcc, NoLock, WriteAsZeros)
 262     {
 263       Offset (0x84),
 264       PSAT,   32
 265     }
 266
 267     PowerResource(PLPE, 0, 0)   // Power Resource for LPEA
 268     {
 269       Method (_STA)
 270       {
 271         Return (1)      // Power Resource is always available.
 272       }
 273
 274       Method (_ON)
 275       {
 276         And(PSAT, 0xfffffffC, PSAT)
 277         OR(PSAT, 0X00000000, PSAT)
 278       }
 279
 280       Method (_OFF)
 281       {
 282         OR(PSAT, 0x00000003, PSAT)
 283         OR(PSAT, 0X00000000, PSAT)
 284       }
 285     } // End PLPE
 286
 287     Device (ADMA)
 288     {
 289       Name (_ADR, Zero)  // _ADR: Address
 290       Name (_HID, "DMA0F28")  // _HID: Hardware ID
 291       Name (_CID, "DMA0F28")  // _CID: Compatible ID
 292       Name (_DDN, "Intel(R) Audio  DMA0 - DMA0F28")  // _DDN: DOS Device Name
 293       Name (_UID, One)  // _UID: Unique ID
 294       Name (RBUF, ResourceTemplate ()
 295       {
 296         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00001000, DMA0)  // LPE BASE + LPE DMA0 offset
 297         Memory32Fixed (ReadWrite, 0x55AA55AA, 0x00001000, SHIM)  // LPE BASE + LPE SHIM offset
 298         Interrupt (ResourceConsumer, Level, ActiveLow, Exclusive, , , ) {24}
 299       })
 300
 301       Method (_CRS, 0, NotSerialized)   // _CRS: Current Resource Settings
 302       {
 303         CreateDwordField(^RBUF, ^DMA0._BAS, D0BA)
 304         Add(LPE0, 0x98000, D0BA)
 305         CreateDwordField(^RBUF, ^SHIM._BAS, SHBA)
 306         Add(LPE0, 0x140000, SHBA)
 307         Return (RBUF)
 308       }
 309     }
 310   } // End "Low Power Engine Audio" for Android
 311 }
 312
 313 scope (\_SB.PCI0)
 314 {
 315
 316   //
 317   // Serial ATA Host Controller - Device 19, Function 0
 318   //
 319
 320   Device(SATA)
 321   {
 322     Name(_ADR,0x00130000)
 323     //
 324     // SATA Methods pulled in via SSDT.
 325     //
 326
 327     OperationRegion(SATR, PCI_Config, 0x74,0x4)
 328     Field(SATR,WordAcc,NoLock,Preserve)
 329     {
 330       Offset(0x00), // 0x74, PMCR
 331       ,   8,
 332       PMEE,   1,    //PME_EN
 333       ,   6,
 334       PMES,   1     //PME_STS
 335     }
 336
 337     Method (_STA, 0x0, NotSerialized)
 338     {
 339       Return(0xf)
 340     }
 341
 342     Method(_DSW, 3)
 343     {
 344     } // End _DSW
 345   }
 346
 347   //
 348   // For eMMC 4.41 PCI mode in order to present non-removable device under Windows environment
 349   //
 350   Device(EM41)
 351   {
 352     Name(_ADR,0x00100000)
 353     OperationRegion(SDIO, PCI_Config, 0x84,0x4)
 354     Field(SDIO,WordAcc,NoLock,Preserve)
 355     {
 356       Offset(0x00), // 0x84, PMCR
 357       ,   8,
 358       PMEE,   1,    //PME_EN
 359       ,   6,
 360       PMES,   1     //PME_STS
 361     }
 362
 363     Method (_STA, 0x0, NotSerialized)
 364     {
 365       If (LAnd(LEqual(PCIM, 1), LEqual(SD1D, 0)))
 366       {
 367         Return(0xF)
 368       }
 369       Else
 370       {
 371         Return(0x0)
 372       }
 373     }
 374
 375     Method(_DSW, 3)
 376     {
 377     } // End _DSW
 378
 379     Device (CARD)
 380     {
 381       Name (_ADR, 0x00000008)
 382       Method(_RMV, 0x0, NotSerialized)
 383       {
 384         Return (0)
 385       } // End _DSW
 386     }
 387   }
 388
 389   //
 390   // For eMMC 4.5 PCI mode in order to present non-removable device under Windows environment
 391   //
 392   Device(EM45)
 393   {
 394     Name(_ADR,0x00170000)
 395     OperationRegion(SDIO, PCI_Config, 0x84,0x4)
 396     Field(SDIO,WordAcc,NoLock,Preserve)
 397     {
 398       Offset(0x00), // 0x84, PMCR
 399       ,   8,
 400       PMEE,   1,    //PME_EN
 401       ,   6,
 402       PMES,   1     //PME_STS
 403     }
 404
 405     Method (_STA, 0x0, NotSerialized)
 406     {
 407       If (LAnd(LEqual(PCIM, 1), LEqual(HSID, 0)))
 408       {
 409         Return(0xF)
 410       }
 411       Else
 412       {
 413         Return(0x0)
 414       }
 415     }
 416
 417     Method(_DSW, 3)
 418     {
 419     } // End _DSW
 420
 421     Device (CARD)
 422     {
 423       Name (_ADR, 0x00000008)
 424       Method(_RMV, 0x0, NotSerialized)
 425       {
 426         Return (0)
 427       } // End _DSW
 428     }
 429   }
 430   //
 431   // For SD Host Controller (Bus 0x00 : Dev 0x12 : Func 0x00) PCI mode in order to present non-removable device under Windows environment
 432   //
 433   Device(SD12)
 434   {
 435     Name(_ADR,0x00120000)
 436
 437     Method (_STA, 0x0, NotSerialized)
 438     {
 439       //
 440       // PCIM>> 0:ACPI mode           1:PCI mode
 441       //
 442       If (LEqual(PCIM, 0)) {
 443         Return (0x0)
 444       }
 445
 446       //
 447       // If device is disabled.
 448       //
 449       If (LEqual(SD3D, 1))
 450       {
 451         Return (0x0)
 452       }
 453
 454       Return (0xF)
 455     }
 456
 457     Device (CARD)
 458     {
 459       Name (_ADR, 0x00000008)
 460       Method(_RMV, 0x0, NotSerialized)
 461       {
 462         // SDRM = 0 non-removable;
 463         If (LEqual(SDRM, 0))
 464         {
 465           Return (0)
 466         }
 467
 468         Return (1)
 469       }
 470     }
 471   }
 472
 473   // xHCI Controller - Device 20, Function 0
 474   include("PchXhci.asl")
 475
 476   //
 477   // High Definition Audio Controller - Device 27, Function 0
 478   //
 479   Device(HDEF)
 480   {
 481     Name(_ADR, 0x001B0000)
 482     include("PchAudio.asl")
 483
 484     Method (_STA, 0x0, NotSerialized)
 485     {
 486       If (LEqual(HDAD, 0))
 487       {
 488         Return(0xf)
 489       }
 490       Return(0x0)
 491     }
 492
 493     Method(_DSW, 3)
 494     {
 495     } // End _DSW
 496   } // end "High Definition Audio Controller"
 497
 498
 499
 500   //
 501   // PCIE Root Port #1
 502   //
 503   Device(RP01)
 504   {
 505     Name(_ADR, 0x001C0000)
 506     include("PchPcie.asl")
 507     Name(_PRW, Package() {9, 4})
 508
 509     Method(_PRT,0)
 510     {
 511       If(PICM) { Return(AR04) }// APIC mode
 512       Return (PR04) // PIC Mode
 513     } // end _PRT
 514   } // end "PCIE Root Port #1"
 515
 516   //
 517   // PCIE Root Port #2
 518   //
 519   Device(RP02)
 520   {
 521     Name(_ADR, 0x001C0001)
 522     include("PchPcie.asl")
 523     Name(_PRW, Package() {9, 4})
 524
 525     Method(_PRT,0)
 526     {
 527       If(PICM) { Return(AR05) }// APIC mode
 528       Return (PR05) // PIC Mode
 529     } // end _PRT
 530
 531   } // end "PCIE Root Port #2"
 532
 533   //
 534   // PCIE Root Port #3
 535   //
 536   Device(RP03)
 537   {
 538     Name(_ADR, 0x001C0002)
 539     include("PchPcie.asl")
 540     Name(_PRW, Package() {9, 4})
 541     Method(_PRT,0)
 542     {
 543       If(PICM) { Return(AR06) }// APIC mode
 544       Return (PR06) // PIC Mode
 545     } // end _PRT
 546
 547   } // end "PCIE Root Port #3"
 548
 549   //
 550   // PCIE Root Port #4
 551   //
 552   Device(RP04)
 553   {
 554     Name(_ADR, 0x001C0003)
 555     include("PchPcie.asl")
 556     Name(_PRW, Package() {9, 4})
 557     Method(_PRT,0)
 558     {
 559       If(PICM) { Return(AR07) }// APIC mode
 560       Return (PR07) // PIC Mode
 561     } // end _PRT
 562
 563   } // end "PCIE Root Port #4"
 564
 565
 566   Scope(\_SB)
 567   {
 568     //
 569     // Dummy power resource for USB D3 cold support
 570     //
 571     PowerResource(USBC, 0, 0)
 572     {
 573       Method(_STA) { Return (0xF) }
 574       Method(_ON) {}
 575       Method(_OFF) {}
 576     }
 577   }
 578   //
 579   // EHCI Controller - Device 29, Function 0
 580   //
 581   Device(EHC1)
 582   {
 583     Name(_ADR, 0x001D0000)
 584     Name(_DEP, Package(0x1)
 585     {
 586       PEPD
 587     })
 588     include("PchEhci.asl")
 589     Name(_PRW, Package() {0x0D, 4})
 590
 591     OperationRegion(USBR, PCI_Config, 0x54,0x4)
 592     Field(USBR,WordAcc,NoLock,Preserve)
 593     {
 594       Offset(0x00), // 0x54, PMCR
 595       ,   8,
 596       PMEE,   1,    //PME_EN
 597       ,   6,
 598       PMES,   1     //PME_STS
 599     }
 600
 601     Method (_STA, 0x0, NotSerialized)
 602     {
 603       If(LEqual(XHCI, 0))      //XHCI is not present. It means EHCI is there
 604       {
 605         Return (0xF)
 606       } Else
 607       {
 608         Return (0x0)
 609       }
 610     }
 611
 612     Method (_RMV, 0, NotSerialized)
 613     {
 614       Return (0x0)
 615     }
 616     //
 617     // Create a dummy PR3 method to indicate to the PCI driver
 618     // that the device is capable of D3 cold
 619     //
 620     Method(_PR3, 0x0, NotSerialized)
 621     {
 622       return (Package() {\_SB.USBC})
 623     }
 624
 625   } // end "EHCI Controller"
 626
 627   //
 628   // SMBus Controller - Device 31, Function 3
 629   //
 630   Device(SBUS)
 631   {
 632     Name(_ADR,0x001F0003)
 633     Include("PchSmb.asl")
 634   }
 635
 636   Device(SEC0)
 637   {
 638     Name (_ADR, 0x001a0000)                     // Device 0x1a, Function 0
 639     Name(_DEP, Package(0x1)
 640     {
 641       PEPD
 642     })
 643
 644
 645     OperationRegion (PMEB, PCI_Config, 0x84, 0x04)  //PMECTRLSTATUS
 646     Field (PMEB, WordAcc, NoLock, Preserve)
 647     {
 648       ,   8,
 649       PMEE,   1,    //bit8 PMEENABLE
 650       ,   6,
 651       PMES,   1     //bit15 PMESTATUS
 652     }
 653
 654     // Arg0 -- integer that contains the device wake capability control (0-disable 1- enable)
 655     // Arg1 -- integer that contains target system state (0-4)
 656     // Arg2 -- integer that contains the target device state
 657     Method (_DSW, 3, NotSerialized)   // _DSW: Device Sleep Wake
 658     {
 659     }
 660
 661     Method (_CRS, 0, NotSerialized)
 662     {
 663       Name (RBUF, ResourceTemplate ()
 664       {
 665         Memory32Fixed (ReadWrite, 0x1e000000, 0x2000000)
 666       })
 667
 668       If (LEqual(PAVP, 2))
 669       {
 670         Return (RBUF)
 671       }
 672       Return (ResourceTemplate() {})
 673     }
 674
 675     Method (_STA)
 676     {
 677       If (LNotEqual(PAVP, 0))
 678       {
 679         Return (0xF)
 680       }
 681       Return (0x0)
 682     }
 683   }   // Device(SEC0)
 684
 685 } // End scope (\_SB.PCI0)
 686