## # This file is used to document mismatches between Intel Platform Innovation Framework specification # (http://www.intel.com/technology/framework/spec.htm) and data structures defind at IntelFrameworkPkg # package in EdkII Open Source Project (https://edk2.tianocore.org/source/browse/edk2/trunk/edk2/IntelFrameworkPkg) ## ## # The general consideration about keeping the mismatches in EdkII: # 1. Some definitions defined in Framework specification may bring a little complexity on implementation. EdkII # makes changes on them from the view of code development. # 2. Some definitions are NOT defined in Framework specification, but introduced in Edk. EdkII chooses to keep # them for backward-compatibility. # 3. The name of some definitions are NOT consistent with Framework specification. If the name doesn't bring # misunderstanding literally, EdkII chooses to keep them for backward-compatibility. # 4. Some defintitions don't exactly match Framework specification, some new field members are introduced in EdkII # to reflect the latest industry standard. # # Note: # The IntelFrameworkPkg contains Framework specification contents that were not adopted by UEFI/PI, and names may be # changed (such as adding "FRAMEWORK_") to avoid name collisions with approved UEFI/PI specifications. ## ## # Mismatch with Intel Platform Innovation Framework for DataHubSubclass Specification (Version 0.90) ## 1. Guid/DataHubRecords.h #define EFI_STRING_TOKEN UINT16 This macro named "EFI_STRING_TOKEN" is *NOT* defined in Framework specification. Keeping this inconsistency for backward compatibility. 2. Guid/DataHubRecords.h #pragma pack(1) typedef struct { UINT8 LastPciBus; } EFI_MISC_LAST_PCI_BUS_DATA; ... typedef struct { EFI_SUBCLASS_TYPE1_HEADER Header; EFI_MISC_SUBCLASS_RECORDS Record; } EFI_MISC_SUBCLASS_DRIVER_DATA; #pragma pack() Section "Alignment" in DataHubSubclass specification say "Fields in a data hub record should be aligned at their natural boundaries". But in EdkII, the data structures above are packed. Keeping this inconsistency for backward compatibility. 3. Guid/DataHubRecords.h #define EFI_SUBCLASS_INSTANCE_RESERVED 0 #define EFI_SUBCLASS_INSTANCE_NON_APPLICABLE 0xFFFF The symbols above are *NOT* defined in DataHubSubclass specification. But the values are defined and are meaningful. According to DataHubSubclass spec, value 0 means Reserved and -1 means Not Applicable. EdkII introduces these macros to faciliate user development. ## # Mismatch with Intel Platform Innovation Framework for CacheSubclass Specification (Version 0.90) ## 1. Guid/DataHubRecords.h typedef EFI_EXP_BASE2_DATA EFI_MAXIMUM_CACHE_SIZE_DATA; The definition named "EFI_MAXIMUM_CACHE_SIZE_DATA" is *NOT* consistent with CacheSubclass specification, in which the name should be EFI_CACHE_MAXIMUM_SIZE_DATA. Keeping this inconsistency for backward compatibility. 2. Guid/DataHubRecords.h typedef struct { UINT32 Level :3; UINT32 Socketed :1; UINT32 Reserved2 :1; UINT32 Location :2; UINT32 Enable :1; UINT32 OperationalMode :2; UINT32 Reserved1 :22; } EFI_CACHE_CONFIGURATION_DATA; The field type of the definition is *NOT* consistent with CacheSubclass specification. Specification defines them as UINT16, which is incorrect and should be UINT32 because the total width of bit-fields is 32bits width. 3. Guid/DataHubRecords.h typedef enum { CacheSizeRecordType = 1, MaximumSizeCacheRecordType = 2, CacheSpeedRecordType = 3, CacheSocketRecordType = 4, CacheSramTypeRecordType = 5, CacheInstalledSramTypeRecordType = 6, CacheErrorTypeRecordType = 7, CacheTypeRecordType = 8, CacheAssociativityRecordType = 9, CacheConfigRecordType = 10 } EFI_CACHE_VARIABLE_RECORD_TYPE; The data structure and all enumeration fields are *NOT* defined in CacheSubclass specification, which only defines the following macros to specify the record number of the data record: #define EFI_CACHE_SIZE_RECORD_NUMBER 0x00000001 #define EFI_CACHE_MAXIMUM_SIZE_RECORD_NUMBER 0x00000002 #define EFI_CACHE_SPEED_RECORD_NUMBER 0x00000003 #define EFI_CACHE_SOCKET_RECORD_NUMBER 0x00000004 #define EFI_CACHE_SRAM_SUPPORT_RECORD_NUMBER 0x00000005 #define EFI_CACHE_SRAM_INSTALL_RECORD_NUMBER 0x00000006 #define EFI_CACHE_ERROR_SUPPORT_RECORD_NUMBER 0x00000007 #define EFI_CACHE_TYPE_RECORD_NUMBER 0x00000008 #define EFI_CACHE_ASSOCIATIVITY_RECORD_NUMBER 0x00000009 #define EFI_CACHE_CONFIGURATION_RECORD_NUMBER 0x0000000A Keeping this inconsistency for backward compatibility. 4. Guid/DataHubRecords.h typedef union { EFI_CACHE_SIZE_DATA CacheSize; ... EFI_CACHE_ASSOCIATION_DATA CacheAssociation; } EFI_CACHE_VARIABLE_RECORD; typedef struct { EFI_SUBCLASS_TYPE1_HEADER DataRecordHeader; EFI_CACHE_VARIABLE_RECORD VariableRecord; } EFI_CACHE_DATA_RECORD; The definitions above are *NOT* defined in CacheSubclass specification. EdkII introduces them to simplify the code logic. Therefore developer doesn't need to allocate memory dynamically to construct variable length data record. Keeping this inconsistency for backward compatibility. ## # Mismatch with Intel Platform Innovation Framework for ProcSubclass Specification (Version 0.90) ## 1. Guid/DataHubRecords.h #define EFI_PROCESSOR_SUBCLASS_VERSION 0x00010000 The value of the definition is *NOT* consistent with ProcSubclass specification, in which the value is 0x0100. Keeping this inconsistency from the perspective of binary consistency. 2. Guid/DataHubRecords.h typedef struct { UINT32 ProcessorBrandIndex :8; UINT32 ProcessorClflush :8; UINT32 ProcessorReserved :8; UINT32 ProcessorDfltApicId :8; } EFI_PROCESSOR_MISC_INFO; The definition is *NOT* consistent with ProcSubclass specification, in which the name of third field is defined as "LogicalProcessorCount" rather than "ProcessorReserved". Keeping this inconsistency for backward compatibility. 3. Guid/DataHubRecords.h typedef enum { ... EfiProcessorFamilyUltraSparcIIIi = 0x58, ... EfiProcessorFamilyIntelPentiumM = 0xB9, EfiProcessorFamilyIntelCeleronD = 0xBA, EfiProcessorFamilyIntelPentiumD = 0xBB, EfiProcessorFamilyIntelPentiumEx = 0xBC, EfiProcessorFamilyIntelCoreSolo = 0xBD, EfiProcessorFamilyReserved = 0xBE, EfiProcessorFamilyIntelCore2 = 0xBF, ... EfiProcessorFamilyG6 = 0xCB, EfiProcessorFamilyzArchitectur = 0xCC, EfiProcessorFamilyViaC7M = 0xD2, EfiProcessorFamilyViaC7D = 0xD3, EfiProcessorFamilyViaC7 = 0xD4, EfiProcessorFamilyViaEden = 0xD5, ... EfiProcessorFamilyIndicatorFamily2 = 0xFE, EfiProcessorFamilyReserved1 = 0xFF } EFI_PROCESSOR_FAMILY_DATA; a. In ProcSubclass specification 0.9, the field name whose value equals to 0x58 is "EfiProcessorFamilyUltraSparcIIi". Due to the name has been defined in previous field, changing it to "EfiProcessorFamilyUltraSparcIIIi" to avoid build break. b. The other fields listed here are *NOT* defined in ProcSubclass specification 0.9. They are introduced to support new processor family (type 4) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 4. Guid/DataHubRecords.h typedef enum { ... EfiProcessorSocket939 = 0x12, EfiProcessorSocketmPGA604 = 0x13, EfiProcessorSocketLGA771 = 0x14, EfiProcessorSocketLGA775 = 0x15 } EFI_PROCESSOR_SOCKET_TYPE_DATA; The fields listed here are *NOT* defined in ProcSubclass specification 0.9. They are introduced to support new processor upgrade (type 4 offset 19h) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 5. Guid/DataHubRecords.h typedef EFI_INTER_LINK_DATA EFI_CACHE_ASSOCIATION_DATA; The definition name "EFI_CACHE_ASSOCIATION_DATA" is *NOT* consistent with ProcSubclass specification 0.9, in which the name should be "EFI_PROCESSOR_CACHE_ASSOCIATION_DATA". Keeping this inconsistency for backward compatibility. 6. Guid/DataHubRecords.h typedef enum { EfiProcessorHealthy = 1, EfiProcessorPerfRestricted = 2, EfiProcessorFuncRestricted = 3 } EFI_PROCESSOR_HEALTH_STATUS; The structure name "EFI_PROCESSOR_HEALTH_STATUS" is *NOT* consistent with ProcSubclass specification 0.9, in which the name should be "EFI_PROCESSOR_HEALTH_STATUS_DATA". Keeping this inconsistency for backward compatibility. 7. Guid/DataHubRecords.h typedef enum { ProcessorCoreFrequencyRecordType = 1, ProcessorFsbFrequencyRecordType = 2, ProcessorVersionRecordType = 3, ProcessorManufacturerRecordType = 4, ProcessorSerialNumberRecordType = 5, ProcessorIdRecordType = 6, ProcessorTypeRecordType = 7, ProcessorFamilyRecordType = 8, ProcessorVoltageRecordType = 9, ProcessorApicBaseAddressRecordType = 10, ProcessorApicIdRecordType = 11, ProcessorApicVersionNumberRecordType = 12, CpuUcodeRevisionDataRecordType = 13, ProcessorStatusRecordType = 14, ProcessorSocketTypeRecordType = 15, ProcessorSocketNameRecordType = 16, CacheAssociationRecordType = 17, ProcessorMaxCoreFrequencyRecordType = 18, ProcessorAssetTagRecordType = 19, ProcessorMaxFsbFrequencyRecordType = 20, ProcessorPackageNumberRecordType = 21, ProcessorCoreFrequencyListRecordType = 22, ProcessorFsbFrequencyListRecordType = 23, ProcessorHealthStatusRecordType = 24, ProcessorCoreCountRecordType = 25, ProcessorEnabledCoreCountRecordType = 26, ProcessorThreadCountRecordType = 27, ProcessorCharacteristicsRecordType = 28, ProcessorFamily2RecordType = 29, ProcessorPartNumberRecordType = 30, } EFI_CPU_VARIABLE_RECORD_TYPE; The enumeration fields from ProcessorCoreFrequencyRecordType to ProcessorHealthStatusRecordType are *NOT* defined in ProcSubclass specification 0.9, which only defines the following macros to specify the record number of the data record: #define EFI_PROCESSOR_FREQUENCY_RECORD_NUMBER 0x00000001 #define EFI_PROCESSOR_BUS_FREQUENCY_RECORD_NUMBER 0x00000002 #define EFI_PROCESSOR_VERSION_RECORD_NUMBER 0x00000003 #define EFI_PROCESSOR_MANUFACTURER_RECORD_NUMBER 0x00000004 #define EFI_PROCESSOR_SERIAL_NUMBER_RECORD_NUMBER 0x00000005 #define EFI_PROCESSOR_ID_RECORD_NUMBER 0x00000006 #define EFI_PROCESSOR_TYPE_RECORD_NUMBER 0x00000007 #define EFI_PROCESSOR_FAMILY_RECORD_NUMBER 0x00000008 #define EFI_PROCESSOR_VOLTAGE_RECORD_NUMBER 0x00000009 #define EFI_PROCESSOR_APIC_BASE_ADDRESS_RECORD_NUMBER 0x0000000A #define EFI_PROCESSOR_APIC_ID_RECORD_NUMBER 0x0000000B #define EFI_PROCESSOR_APIC_VER_NUMBER_RECORD_NUMBER 0x0000000C #define EFI_PROCESSOR_MICROCODE_REVISION_RECORD_NUMBER 0x0000000D #define EFI_PROCESSOR_STATUS_RECORD_NUMBER 0x0000000E #define EFI_PROCESSOR_SOCKET_TYPE_RECORD_NUMBER 0x0000000F #define EFI_PROCESSOR_SOCKET_NAME_RECORD_NUMBER 0x00000010 #define EFI_PROCESSOR_CACHE_ASSOCIATION_RECORD_NUMBER 0x00000011 #define EFI_PROCESSOR_MAX_FREQUENCY_RECORD_NUMBER 0x00000012 #define EFI_PROCESSOR_ASSET_TAG_RECORD_NUMBER 0x00000013 #define EFI_PROCESSOR_MAX_FSB_FREQUENCY_RECORD_NUMBER 0x00000014 #define EFI_PROCESSOR_PACKAGE_NUMBER_RECORD_NUMBER 0x00000015 #define EFI_PROCESSOR_FREQUENCY_LIST_RECORD_NUMBER 0x00000016 #define EFI_PROCESSOR_FSB_FREQUENCY_LIST_RECORD_NUMBER 0x00000017 #define EFI_PROCESSOR_HEALTH_STATUS_RECORD_NUMBER 0x00000018 Keeping this inconsistency for backward compatibility. The enumeration fields from ProcessorCoreCountRecordType to ProcessorPartNumberRecordType are *NOT* defined in ProcSubclass specification 0.9. They are introduced to support new fields for type 4 defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 8. Guid/DataHubRecords.h typedef union { EFI_PROCESSOR_CORE_FREQUENCY_LIST_DATA ProcessorCoreFrequencyList; ... EFI_PROCESSOR_FAMILY2_DATA ProcessorFamily2; } EFI_CPU_VARIABLE_RECORD; typedef struct { EFI_SUBCLASS_TYPE1_HEADER DataRecordHeader; EFI_CPU_VARIABLE_RECORD VariableRecord; } EFI_CPU_DATA_RECORD; The definitions above are *NOT* defined in ProcSubclass specification 0.9. EdkII introduces them to simplify the code logic. Therefore developer doesn't need to allocate memory dynamically to construct variable length data record. Keeping this inconsistency for backward compatibility. 9. Guid/DataHubRecords.h typedef STRING_REF EFI_PROCESSOR_PART_NUMBER_DATA; typedef enum { EfiProcessorFamilySh3 = 0x104, EfiProcessorFamilySh4 = 0x105, EfiProcessorFamilyArm = 0x118, EfiProcessorFamilyStrongArm = 0x119, EfiProcessorFamily6x86 = 0x12C, EfiProcessorFamilyMediaGx = 0x12D, EfiProcessorFamilyMii = 0x12E, EfiProcessorFamilyWinChip = 0x140, EfiProcessorFamilyDsp = 0x15E, EfiProcessorFamilyVideo = 0x1F4 } EFI_PROCESSOR_FAMILY2_DATA; typedef UINT8 EFI_PROCESSOR_CORE_COUNT_DATA; typedef UINT8 EFI_PROCESSOR_ENABLED_CORE_COUNT_DATA; typedef UINT8 EFI_PROCESSOR_THREAD_COUNT_DATA; typedef struct { UINT16 Reserved :1; UINT16 Unknown :1; UINT16 Capable64Bit :1; UINT16 Reserved2 :13; } EFI_PROCESSOR_CHARACTERISTICS_DATA; The fields listed here are *NOT* defined in ProcSubclass specification 0.9. They are introduced to support new fields for type 4 defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. ## # Mismatch with Intel Platform Innovation Framework for MemSubclass Specification (Version 0.90) ## 1. Guid/DataHubRecords.h typedef enum _EFI_MEMORY_FORM_FACTOR { ... EfiMemoryFormFactorFbDimm = 0x0F } EFI_MEMORY_FORM_FACTOR; typedef enum _EFI_MEMORY_ARRAY_TYPE { ... EfiMemoryTypeDdr2 = 0x13, EfiMemoryTypeDdr2FbDimm = 0x14 } EFI_MEMORY_ARRAY_TYPE; typedef enum { ... EfiMemoryStatePartial = 6 } EFI_MEMORY_STATE; The fields listed above are *NOT* defined in MemSubclass specification 0.9. They are introduced to support new memory device (type 17) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 2. Guid/DataHubRecords.h typedef struct { ... EFI_EXP_BASE10_DATA MemorySpeed; ... } EFI_MEMORY_ARRAY_LINK_DATA; The field name "MemorySpeed" in the definition above is *NOT* consistent with MemSubclass specification 0.9, in which it is defined as MemoryTypeSpeed. Keeping this inconsistency for backward compatibility. 3. Guid/DataHubRecords.h #define EFI_MEMORY_CONTROLLER_INFORMATION_RECORD_NUMBER 0x00000008 typedef enum { EfiErrorDetectingMethodOther = 1, EfiErrorDetectingMethodUnknown = 2, EfiErrorDetectingMethodNone = 3, EfiErrorDetectingMethodParity = 4, EfiErrorDetectingMethod32Ecc = 5, EfiErrorDetectingMethod64Ecc = 6, EfiErrorDetectingMethod128Ecc = 7, EfiErrorDetectingMethodCrc = 8 } EFI_MEMORY_ERROR_DETECT_METHOD_TYPE; typedef struct { UINT8 Other :1; UINT8 Unknown :1; UINT8 None :1; UINT8 SingleBitErrorCorrect :1; UINT8 DoubleBitErrorCorrect :1; UINT8 ErrorScrubbing :1; UINT8 Reserved :2; } EFI_MEMORY_ERROR_CORRECT_CAPABILITY; typedef enum { EfiMemoryInterleaveOther = 1, EfiMemoryInterleaveUnknown = 2, EfiMemoryInterleaveOneWay = 3, EfiMemoryInterleaveTwoWay = 4, EfiMemoryInterleaveFourWay = 5, EfiMemoryInterleaveEightWay = 6, EfiMemoryInterleaveSixteenWay = 7 } EFI_MEMORY_SUPPORT_INTERLEAVE_TYPE; typedef struct { UINT16 Other :1; UINT16 Unknown :1; UINT16 SeventyNs:1; UINT16 SixtyNs :1; UINT16 FiftyNs :1; UINT16 Reserved :11; } EFI_MEMORY_SPEED_TYPE; typedef struct { UINT16 Other :1; UINT16 Unknown :1; UINT16 Standard :1; UINT16 FastPageMode:1; UINT16 EDO :1; UINT16 Parity :1; UINT16 ECC :1; UINT16 SIMM :1; UINT16 DIMM :1; UINT16 BurstEdo :1; UINT16 SDRAM :1; UINT16 Reserved :5; } EFI_MEMORY_SUPPORTED_TYPE; typedef struct { UINT8 Five :1; UINT8 Three :1; UINT8 Two :1; UINT8 Reserved:5; } EFI_MEMORY_MODULE_VOLTAGE_TYPE; typedef struct { EFI_MEMORY_ERROR_DETECT_METHOD_TYPE ErrorDetectingMethod; EFI_MEMORY_ERROR_CORRECT_CAPABILITY ErrorCorrectingCapability; EFI_MEMORY_SUPPORT_INTERLEAVE_TYPE MemorySupportedInterleave; EFI_MEMORY_SUPPORT_INTERLEAVE_TYPE MemoryCurrentInterleave; UINT8 MaxMemoryModuleSize; EFI_MEMORY_SPEED_TYPE MemorySpeedType; EFI_MEMORY_SUPPORTED_TYPE MemorySupportedType; EFI_MEMORY_MODULE_VOLTAGE_TYPE MemoryModuleVoltage; UINT8 NumberofMemorySlot; EFI_MEMORY_ERROR_CORRECT_CAPABILITY EnabledCorrectingCapability; UINT16 *MemoryModuleConfigHandles; } EFI_MEMORY_CONTROLLER_INFORMATION; typedef struct { EFI_MEMORY_ERROR_DETECT_METHOD_TYPE ErrorDetectingMethod; EFI_MEMORY_ERROR_CORRECT_CAPABILITY ErrorCorrectingCapability; EFI_MEMORY_SUPPORT_INTERLEAVE_TYPE MemorySupportedInterleave; EFI_MEMORY_SUPPORT_INTERLEAVE_TYPE MemoryCurrentInterleave; UINT8 MaxMemoryModuleSize; EFI_MEMORY_SPEED_TYPE MemorySpeedType; EFI_MEMORY_SUPPORTED_TYPE MemorySupportedType; EFI_MEMORY_MODULE_VOLTAGE_TYPE MemoryModuleVoltage; UINT8 NumberofMemorySlot; EFI_MEMORY_ERROR_CORRECT_CAPABILITY EnabledCorrectingCapability; EFI_INTER_LINK_DATA MemoryModuleConfig[1]; } EFI_MEMORY_CONTROLLER_INFORMATION_DATA; The definitions above are *NOT* defined in MemSubclass specification 0.9. They are introduced to support new memory controller information (type 5) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 4. Guid/DataHubRecords.h #define EFI_MEMORY_32BIT_ERROR_INFORMATION_RECORD_NUMBER 0x00000009 typedef enum { EfiMemoryErrorOther = 1, EfiMemoryErrorUnknown = 2, EfiMemoryErrorOk = 3, EfiMemoryErrorBadRead = 4, EfiMemoryErrorParity = 5, EfiMemoryErrorSigleBit = 6, EfiMemoryErrorDoubleBit = 7, EfiMemoryErrorMultiBit = 8, EfiMemoryErrorNibble = 9, EfiMemoryErrorChecksum = 10, EfiMemoryErrorCrc = 11, EfiMemoryErrorCorrectSingleBit = 12, EfiMemoryErrorCorrected = 13, EfiMemoryErrorUnCorrectable = 14 } EFI_MEMORY_ERROR_TYPE; typedef enum { EfiMemoryGranularityOther = 1, EfiMemoryGranularityOtherUnknown = 2, EfiMemoryGranularityDeviceLevel = 3, EfiMemoryGranularityMemPartitionLevel = 4 } EFI_MEMORY_ERROR_GRANULARITY_TYPE; typedef enum { EfiMemoryErrorOperationOther = 1, EfiMemoryErrorOperationUnknown = 2, EfiMemoryErrorOperationRead = 3, EfiMemoryErrorOperationWrite = 4, EfiMemoryErrorOperationPartialWrite = 5 } EFI_MEMORY_ERROR_OPERATION_TYPE; typedef struct { EFI_MEMORY_ERROR_TYPE MemoryErrorType; EFI_MEMORY_ERROR_GRANULARITY_TYPE MemoryErrorGranularity; EFI_MEMORY_ERROR_OPERATION_TYPE MemoryErrorOperation; UINT32 VendorSyndrome; UINT32 MemoryArrayErrorAddress; UINT32 DeviceErrorAddress; UINT32 DeviceErrorResolution; } EFI_MEMORY_32BIT_ERROR_INFORMATION; The definitions above are *NOT* defined in MemSubclass specification 0.9. They are introduced to support new 32-bit memory error information (type 18) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 5. Guid/DataHubRecords.h #define EFI_MEMORY_64BIT_ERROR_INFORMATION_RECORD_NUMBER 0x0000000A typedef struct { EFI_MEMORY_ERROR_TYPE MemoryErrorType; EFI_MEMORY_ERROR_GRANULARITY_TYPE MemoryErrorGranularity; EFI_MEMORY_ERROR_OPERATION_TYPE MemoryErrorOperation; UINT32 VendorSyndrome; UINT64 MemoryArrayErrorAddress; UINT64 DeviceErrorAddress; UINT32 DeviceErrorResolution; } EFI_MEMORY_64BIT_ERROR_INFORMATION; The definitions above are *NOT* defined in MemSubclass specification 0.9. They are introduced to support new 64-bit memory error information (type 33) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 6. Guid/DataHubRecords.h typedef union _EFI_MEMORY_SUBCLASS_RECORDS { EFI_MEMORY_SIZE_DATA SizeData; ... EFI_MEMORY_64BIT_ERROR_INFORMATION Memory64bitErrorInfo; } EFI_MEMORY_SUBCLASS_RECORDS; typedef struct { EFI_SUBCLASS_TYPE1_HEADER Header; EFI_MEMORY_SUBCLASS_RECORDS Record; } EFI_MEMORY_SUBCLASS_DRIVER_DATA; The definitions above are *NOT* defined in MemSubclass specification 0.9. EdkII introduces them to simplify the code logic. Therefore developer doesn't need to allocate memory dynamically to construct variable length data record. Keeping this inconsistency for backward compatibility. ## # Mismatch with Intel Platform Innovation Framework for MiscSubclass Specification (Version 0.90) ## 1. Guid/DataHubRecords.h #pragma pack(1) typedef struct _USB_PORT_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH PciBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } USB_PORT_DEVICE_PATH; typedef struct _IDE_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH PciBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } IDE_DEVICE_PATH; typedef struct _RMC_CONN_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH PciBridgeDevicePath; PCI_DEVICE_PATH PciBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } RMC_CONN_DEVICE_PATH; typedef struct _RIDE_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH PciBridgeDevicePath; PCI_DEVICE_PATH PciBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } RIDE_DEVICE_PATH; typedef struct _GB_NIC_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH PciBridgeDevicePath; PCI_DEVICE_PATH PciXBridgeDevicePath; PCI_DEVICE_PATH PciXBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } GB_NIC_DEVICE_PATH; typedef struct _PS2_CONN_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH LpcBridgeDevicePath; ACPI_HID_DEVICE_PATH LpcBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } PS2_CONN_DEVICE_PATH; typedef struct _SERIAL_CONN_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH LpcBridgeDevicePath; ACPI_HID_DEVICE_PATH LpcBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } SERIAL_CONN_DEVICE_PATH; typedef struct _PARALLEL_CONN_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH LpcBridgeDevicePath; ACPI_HID_DEVICE_PATH LpcBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } PARALLEL_CONN_DEVICE_PATH; typedef struct _FLOOPY_CONN_DEVICE_PATH { ACPI_HID_DEVICE_PATH PciRootBridgeDevicePath; PCI_DEVICE_PATH LpcBridgeDevicePath; ACPI_HID_DEVICE_PATH LpcBusDevicePath; EFI_DEVICE_PATH_PROTOCOL EndDevicePath; } FLOOPY_CONN_DEVICE_PATH; typedef union _EFI_MISC_PORT_DEVICE_PATH { USB_PORT_DEVICE_PATH UsbDevicePath; IDE_DEVICE_PATH IdeDevicePath; RMC_CONN_DEVICE_PATH RmcConnDevicePath; RIDE_DEVICE_PATH RideDevicePath; GB_NIC_DEVICE_PATH GbNicDevicePath; PS2_CONN_DEVICE_PATH Ps2ConnDevicePath; SERIAL_CONN_DEVICE_PATH SerialConnDevicePath; PARALLEL_CONN_DEVICE_PATH ParallelConnDevicePath; FLOOPY_CONN_DEVICE_PATH FloppyConnDevicePath; } EFI_MISC_PORT_DEVICE_PATH; #pragma pack() a. The definitions above are *NOT* defined in MiscSubclass specifications 0.9. EdkII introduces them to simplify the code logic. Therefore developer doesn't need to allocate memory dynamically to construct variable length device path for various device. Keeping this inconsistency for backward compatibility. b. The definitions above are packed. This way violates the rule of alignment defined in DataHubSubclass specification. Section "Alignment" in DataHubSubclass specification say "Fields in a data hub record should be aligned at their natural boundaries". Keeping this inconsistency for backward compatibility. 2. Guid/DataHubRecords.h typedef struct { ... EFI_MISC_PORT_DEVICE_PATH PortPath; } EFI_MISC_PORT_INTERNAL_CONNECTOR_DESIGNATOR_DATA; The definition is *NOT* consistent with MiscSubclass specification, in which the type of last field is defined as "EFI_DEVICE_PATH_PROTOCOL". The definition in Specification may bring a little complexity on implementation. User have to allocate variable length memory to contain device path info and free them finially. EdkII introduced an union type named EFI_MISC_PORT_DEVICE_PATH to avoid the logic above. 3. Guid/DataHubRecords.h typedef struct { ... UINT8 BiosMajorRelease; UINT8 BiosMinorRelease; UINT8 BiosEmbeddedFirmwareMajorRelease; UINT8 BiosEmbeddedFirmwareMinorRelease; } EFI_MISC_BIOS_VENDOR_DATA; The fields listed above are *NOT* defined in MiscSubclass specification 0.9. They are introduced to support new bios information (type 0) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 4. Guid/DataHubRecords.h typedef struct { ... STRING_REF SystemSKUNumber; STRING_REF SystemFamily; } EFI_MISC_SYSTEM_MANUFACTURER_DATA; The fields listed above are *NOT* defined in MiscSubclass specification 0.9. They are introduced to support new system information (type 1) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 5. Guid/DataHubRecords.h typedef struct { ... EFI_INTER_LINK_DATA ManagementDeviceThresholdLink; UINT8 ComponentType; } EFI_MISC_MANAGEMENT_DEVICE_COMPONENT_DESCRIPTION_DATA; a. The field "ManagementDeviceThresholdLink" above is *NOT* defined in MiscSubclass specification 0.9. It is introduced to support new management device component (type 35) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. b. The field "ComponentType" above is *NOT* defined in MiscSubclass specifications 0.9. It's implementation-specific to simplify the code logic. Keeping this inconsistency for backward compatibility. 6. Guid/DataHubRecords.h typedef struct { UINT32 ChassisType :16; UINT32 ChassisLockPresent:1; UINT32 Reserved :15; } EFI_MISC_CHASSIS_STATUS; The definition is *NOT* consistent with MiscSubclass specification 0.9, in which the first field is assigned a wrong field name "EFI_MISC_CHASSIS_TYPE". Due to EFI_MISC_CHASSIS_TYPE has been declared as a data type, it can not be used as a field name again. EdkII changes its name to "ChassisType" to pass build. 7. Guid/DataHubRecords.h typedef enum { ... EfiSlotTypeAgp2X = 0x10, ... EfiSlotTypePciExpress = 0xA5, EfiSlotTypePciExpressX1 = 0xA6, EfiSlotTypePciExpressX2 = 0xA7, EfiSlotTypePciExpressX4 = 0xA8, EfiSlotTypePciExpressX8 = 0xA9, EfiSlotTypePciExpressX16 = 0xAA } EFI_MISC_SLOT_TYPE; a. The field name "EfiSlotTypeAgp2X" is *NOT* consistent with MiscSubclass specification 0.9, in which it is named "EfiSlotTypeApg2X". From its literal sense, this field represents a AGP type display card, so it should be named as "EfiSlotTypeAgp2X". b. The enumeration fields from "EfiSlotTypePciExpress" to "EfiSlotTypePciExpressX16" are *NOT* defined in MiscSubclass specification 0.9. They are introduced to support new system slots (type 9) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 8. Guid/DataHubRecords.h typedef struct { ... EFI_MISC_ONBOARD_DEVICE_STATUS OnBoardDeviceStatus; ... } EFI_MISC_ONBOARD_DEVICE_DATA; The definition is *NOT* consistent with MiscSubclass specification 0.9, in which the field "OnBoardDeviceStatus" is named as "OnBoardDeviceType". Keeping this inconsistency for backward compatibility. 9. Guid/DataHubRecords.h #define EFI_MISC_PORTABLE_BATTERY_RECORD_NUMBER 0x00000010 The name of the definition is *NOT* consistent with MiscSubclass specification 0.9, in which it is defined as "EFI_MISC_BATTERY_LOCATION_RECORD_NUMBER". Keeping this inconsistency for backward compatibility. 10. Guid/DataHubRecords.h typedef enum { EfiPortableBatteryDeviceChemistryOther = 1, EfiPortableBatteryDeviceChemistryUnknown = 2, EfiPortableBatteryDeviceChemistryLeadAcid = 3, EfiPortableBatteryDeviceChemistryNickelCadmium = 4, EfiPortableBatteryDeviceChemistryNickelMetalHydride = 5, EfiPortableBatteryDeviceChemistryLithiumIon = 6, EfiPortableBatteryDeviceChemistryZincAir = 7, EfiPortableBatteryDeviceChemistryLithiumPolymer = 8 } EFI_MISC_PORTABLE_BATTERY_DEVICE_CHEMISTRY; The name of the definition is *NOT* consistent with MiscSubclass specification, in which it is defined as "EFI_MISC_BATTERY_DEVICE_CHEMISTRY". And all field names have a redundant "Portable" string compared with MisSubclass specification 0.9. Keeping this inconsistency for backward compatibility. 11. Guid/DataHubRecords.h typedef struct { STRING_REF Location; STRING_REF Manufacturer; STRING_REF ManufactureDate; STRING_REF SerialNumber; STRING_REF DeviceName; EFI_MISC_PORTABLE_BATTERY_DEVICE_CHEMISTRY DeviceChemistry; UINT16 DesignCapacity; UINT16 DesignVoltage; STRING_REF SBDSVersionNumber; UINT8 MaximumError; UINT16 SBDSSerialNumber; UINT16 SBDSManufactureDate; STRING_REF SBDSDeviceChemistry; UINT8 DesignCapacityMultiplier; UINT32 OEMSpecific; UINT8 BatteryNumber; BOOLEAN Valid; } EFI_MISC_PORTABLE_BATTERY; The definition is *NOT* consistent with MiscSubclass specification 0.9, in which the structure name is defined as "EFI_MISC_BATTERY_LOCATION_DATA". Moreover, the name and the order of all fields are also different with MiscSubclass specification 0.9. Keeping this inconsistency for backward compatibility. 12. Guid/DataHubRecords.h typedef enum { ... } EFI_MISC_BOOT_INFORMATION_STATUS_DATA_TYPE; The name of the definition is *NOT* consistent with MiscSubclass specification 0.9, in which it is defined as "EFI_MISC_BOOT_INFORMATION_STATUS_TYPE". Keeping this inconsistency for backward compatibility. 13. Guid/DataHubRecords.h typedef struct { EFI_MISC_BOOT_INFORMATION_STATUS_DATA_TYPE BootInformationStatus; ... } EFI_MISC_BOOT_INFORMATION_STATUS_DATA; The definition is *NOT* consistent with MiscSubclass specification 0.9, in which the type of the first field is "EFI_MISC_BOOT_INFORMATION_STATUS_TYPE". Keeping this inconsistency for backward compatibility. 14. Guid/DataHubRecords.h typedef struct { ... } EFI_MISC_SYSTEM_POWER_SUPPLY_DATA; The name of the definition is *NOT* consistent with MiscSubclass specification 0.9, in which it is defined as "EFI_MISC_POWER_SUPPLY_UNIT_GROUP_DATA". Keeping this inconsistency for backward compatibility. 15. Guid/DataHubRecords.h typedef struct { ... } SMBIOS_STRUCTURE_HDR; The name of the definition is *NOT* consistent with MiscSubclass specification 0.9, in which the structure name is defined as "EFI_SMBIOS_STRUCTURE_HDR". Due to this structure is commonly used by vendor to construct SmBios type 0x80~0xFF table, Keeping this inconsistency for backward compatibility. 16. Guid/DataHubRecords.h typedef struct { SMBIOS_STRUCTURE_HDR Header; ... } EFI_MISC_SMBIOS_STRUCT_ENCAPSULATION_DATA; The definition is *NOT* consistent with MiscSubclass specification 0.9, in which the type of the first field is "EFI_SMBIOS_STRUCTURE_HDR". Keeping this inconsistency for backward compatibility. 17. Guid/DataHubRecords.h typedef struct { UINT16 PowerSupplyHotReplaceable:1; UINT16 PowerSupplyPresent :1; UINT16 PowerSupplyUnplugged :1; UINT16 InputVoltageRangeSwitch :4; UINT16 PowerSupplyStatus :3; UINT16 PowerSupplyType :4; UINT16 Reserved :2; } EFI_MISC_POWER_SUPPLY_CHARACTERISTICS; all field type in the definition are *NOT* consistent with MiscSubclass specification 0.9, in which it is defined as "UINT32" and the total width of bit-fields is 32bits width. Keeping this inconsistency for backward compatibility. 18. Guid/DataHubRecords.h #define EFI_MISC_SYSTEM_EVENT_LOG_RECORD_NUMBER 0x00000020 typedef struct { UINT16 LogAreaLength; UINT16 LogHeaderStartOffset; UINT16 LogDataStartOffset; UINT8 AccessMethod; UINT8 LogStatus; UINT32 LogChangeToken; UINT32 AccessMethodAddress; UINT8 LogHeaderFormat; UINT8 NumberOfSupportedLogType; UINT8 LengthOfLogDescriptor; } EFI_MISC_SYSTEM_EVENT_LOG_DATA; #define ACCESS_INDEXIO_1INDEX8BIT_DATA8BIT 0x00 #define ACCESS_INDEXIO_2INDEX8BIT_DATA8BIT 0X01 #define ACCESS_INDEXIO_1INDEX16BIT_DATA8BIT 0X02 #define ACCESS_MEMORY_MAPPED 0x03 #define ACCESS_GPNV 0x04 The definitions listed above are *NOT* defined in MiscSubclass specification 0.9. It is introduced to support new system event log (type 15) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 19. Guid/DataHubRecords.h #define EFI_MISC_MANAGEMENT_DEVICE_THRESHOLD_RECORD_NUMBER 0x00000021 typedef struct { UINT16 LowerThresNonCritical; UINT16 UpperThresNonCritical; UINT16 LowerThresCritical; UINT16 UpperThresCritical; UINT16 LowerThresNonRecover; UINT16 UpperThresNonRecover; } EFI_MISC_MANAGEMENT_DEVICE_THRESHOLD; The definitions listed above are *NOT* defined in MiscSubclass specification 0.9. It is introduced to support new management device threshold data (type 36) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 20. Guid/DataHubRecords.h typedef union { EFI_MISC_LAST_PCI_BUS_DATA LastPciBus; ... EFI_MISC_MANAGEMENT_DEVICE_THRESHOLD MiscManagementDeviceThreshold; } EFI_MISC_SUBCLASS_RECORDS; typedef struct { EFI_SUBCLASS_TYPE1_HEADER Header; EFI_MISC_SUBCLASS_RECORDS Record; } EFI_MISC_SUBCLASS_DRIVER_DATA; The definitions above are *NOT* defined in MemSubclass specification 0.9. EdkII introduces them to simplify the code logic. Therefore developer doesn't need to allocate memory dynamically to construct variable length data record. Keeping this inconsistency for backward compatibility. 21. Guid/DataHubRecords.h typedef struct { EFI_MISC_COOLING_DEVICE_TYPE CoolingDeviceType; EFI_INTER_LINK_DATA CoolingDeviceTemperatureLink; UINT8 CoolingDeviceUnitGroup; UINT16 CoolingDeviceNominalSpeed; UINT32 CoolingDeviceOemDefined; } EFI_MISC_COOLING_DEVICE_TEMP_LINK_DATA; The "CoolingDeviceUnitGroup" field and "CoolingDeviceNominalSpeed" field are *NOT* consistent with MiscSubclass specification 0.9. These fields are aligned with SMBIOS 2.6 specification. And user can easily assign any value to CoolingDeviceNominalSpeed. 22. Guid/DataHubRecords.h typedef enum { ... EfiSlotDataBusWidth1xOrx1 = 0x8, EfiSlotDataBusWidth2xOrx2 = 0x9, EfiSlotDataBusWidth4xOrx4 = 0xA, EfiSlotDataBusWidth8xOrx8 = 0xB, EfiSlotDataBusWidth12xOrx12 = 0xC, EfiSlotDataBusWidth16xOrx16 = 0xD, EfiSlotDataBusWidth32xOrx32 = 0xE } EFI_MISC_SLOT_DATA_BUS_WIDTH; The enumeration fields from "EfiSlotDataBusWidth1xOrx1" to "EfiSlotDataBusWidth32xOrx32" are *NOT* defined in MiscSubclass specification 0.9. They are introduced to support new system slots (type 9) defined in SmBios 2.6 specification. Keeping this inconsistency to reflect the latest industry standard. 23. Guid/DataHubRecords.h typedef struct { ... UINT16 TemperatureProbeMaximumValue; UINT16 TemperatureProbeMinimumValue; UINT16 TemperatureProbeResolution; UINT16 TemperatureProbeTolerance; UINT16 TemperatureProbeAccuracy; UINT16 TemperatureProbeNominalValue; UINT16 MDLowerNoncriticalThreshold; UINT16 MDUpperNoncriticalThreshold; UINT16 MDLowerCriticalThreshold; UINT16 MDUpperCriticalThreshold; UINT16 MDLowerNonrecoverableThreshold; UINT16 MDUpperNonrecoverableThreshold; ... } EFI_MISC_TEMPERATURE_PROBE_DESCRIPTION_DATA; The structure fields from "TemperatureProbeMaximumValue" to "MDUpperNonrecoverableThreshold" are *NOT* consistent with MiscSubclass specification 0.9. The specification defines the fields type as EFI_EXP_BASE10_DATA. In fact, they should be UINT16 type because they refer to 16bit width data. Keeping this inconsistency for backward compatibility. 24. Guid/DataHubRecords.h #define EFI_MISC_IPMI_INTERFACE_TYPE_DATA_RECORD_NUMBER EFI_MISC_IPMI_INTERFACE_TYPE_RECORD_NUMBER The definition above is *NOT* defined in MiscSubclass specifications 0.9. It's defined for backward compatibility. ## # Mismatch with Intel Platform Innovation Framework for Status Codes Specification (Version 0.92) ## 1. Include/Framework/StatusCode.h #define EFI_IOB_ATA_BUS_SMART_ENABLE (EFI_SUBCLASS_SPECIFIC | 0x00000000) #define EFI_IOB_ATA_BUS_SMART_DISABLE (EFI_SUBCLASS_SPECIFIC | 0x00000001) #define EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD (EFI_SUBCLASS_SPECIFIC | 0x00000002) #define EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD (EFI_SUBCLASS_SPECIFIC | 0x00000003) #define EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED (EFI_SUBCLASS_SPECIFIC | 0x00000000) #define EFI_IOB_ATA_BUS_SMART_DISABLED (EFI_SUBCLASS_SPECIFIC | 0x00000001) #define EFI_SW_DXE_BS_PC_BEGIN_CONNECTING_DRIVERS (EFI_SUBCLASS_SPECIFIC | 0x00000005) #define EFI_SW_DXE_BS_PC_VERIFYING_PASSWORD (EFI_SUBCLASS_SPECIFIC | 0x00000006) #define EFI_SW_DXE_RT_PC_S0 (EFI_SUBCLASS_SPECIFIC | 0x00000000) #define EFI_SW_DXE_RT_PC_S1 (EFI_SUBCLASS_SPECIFIC | 0x00000001) #define EFI_SW_DXE_RT_PC_S2 (EFI_SUBCLASS_SPECIFIC | 0x00000002) #define EFI_SW_DXE_RT_PC_S3 (EFI_SUBCLASS_SPECIFIC | 0x00000003) #define EFI_SW_DXE_RT_PC_S4 (EFI_SUBCLASS_SPECIFIC | 0x00000004) #define EFI_SW_DXE_RT_PC_S5 (EFI_SUBCLASS_SPECIFIC | 0x00000005) #define EFI_SW_CSM_LEGACY_ROM_INIT (EFI_SUBCLASS_SPECIFIC | 0x00000000) The definitions above are *NOT* defined in Framework StatusCodes specification 0.92. But these subclass-specific error code operations are needed for EdkII implementation. Keeping this inconsistency for backward compatibility. 2. Include/Framework/StatusCode.h typedef union { CHAR8 *Ascii; CHAR16 *Unicode; ... } EFI_STATUS_CODE_STRING; The definition is *NOT* consistent with Framework SatausCodes specification 0.92, in which the first field is defined as "CHAR8 Ascii[]" and the second field is defined as "CHAR16 Unicode[]". Keeping this inconsistency for backward compatibility. 3. Include/Framework/StatusCode.h #define EFI_SW_EC_X64_DIVIDE_ERROR EXCEPT_X64_DIVIDE_ERROR #define EFI_SW_EC_X64_DEBUG EXCEPT_X64_DEBUG #define EFI_SW_EC_X64_NMI EXCEPT_X64_NMI #define EFI_SW_EC_X64_BREAKPOINT EXCEPT_X64_BREAKPOINT #define EFI_SW_EC_X64_OVERFLOW EXCEPT_X64_OVERFLOW #define EFI_SW_EC_X64_BOUND EXCEPT_X64_BOUND #define EFI_SW_EC_X64_INVALID_OPCODE EXCEPT_X64_INVALID_OPCODE #define EFI_SW_EC_X64_DOUBLE_FAULT EXCEPT_X64_DOUBLE_FAULT #define EFI_SW_EC_X64_INVALID_TSS EXCEPT_X64_INVALID_TSS #define EFI_SW_EC_X64_SEG_NOT_PRESENT EXCEPT_X64_SEG_NOT_PRESENT #define EFI_SW_EC_X64_STACK_FAULT EXCEPT_X64_STACK_FAULT #define EFI_SW_EC_X64_GP_FAULT EXCEPT_X64_GP_FAULT #define EFI_SW_EC_X64_PAGE_FAULT EXCEPT_X64_PAGE_FAULT #define EFI_SW_EC_X64_FP_ERROR EXCEPT_X64_FP_ERROR #define EFI_SW_EC_X64_ALIGNMENT_CHECK EXCEPT_X64_ALIGNMENT_CHECK #define EFI_SW_EC_X64_MACHINE_CHECK EXCEPT_X64_MACHINE_CHECK #define EFI_SW_EC_X64_SIMD EXCEPT_X64_SIMD The definitions are *NOT* defined in Framework StatusCodes specification 0.92, in which IA32 and IPF exception subclass error code definitions are defined but omit the corresponding definitions for X64. EdkII introduce these definitions for implementation. ## # Mismatch with Intel Platform Innovation Framework for EFI Boot Script Specification (Version 0.91) ## 1. Include/Protocol/BootScriptSave.h #define EFI_BOOT_SCRIPT_SAVE_PROTOCOL_GUID \ { \ 0x470e1529, 0xb79e, 0x4e32, {0xa0, 0xfe, 0x6a, 0x15, 0x6d, 0x29, 0xf9, 0xb2 } \ } The macro name "EFI_BOOT_SCRIPT_SAVE_PROTOCOL_GUID" is *NOT* consistent with Framework BootScript specification 0.91, in which it's defined as "EFI_BOOT_SCRIPT_SAVE_GUID". Keeping this inconsistency for backward compatibility. 2. Include/Protocol/BootScriptSave.h EFI_STATUS EFI_BOOTSERVICE (EFIAPI *EFI_BOOT_SCRIPT_WRITE) ( IN EFI_BOOT_SCRIPT_SAVE_PROTOCOL *This, ... ); The first parameter's type is *NOT* consistent with Framework BootScript specification 0.91, in which it's defined as "struct _EFI_BOOT_SCRIPT_SAVE_PROTOCOL". Keeping this inconsistency for backward compatibility. 3. Include/Framework/BootScript.h #define EFI_BOOT_SCRIPT_MEM_POLL_OPCODE 0x09 #define EFI_BOOT_SCRIPT_INFORMATION_OPCODE 0x0A #define EFI_BOOT_SCRIPT_PCI_CONFIG2_WRITE_OPCODE 0x0B #define EFI_BOOT_SCRIPT_PCI_CONFIG2_READ_WRITE_OPCODE 0x0C #define EFI_BOOT_SCRIPT_DISPATCH_2_OPCODE 0x0D The OPCODEs above are not defined in Framework BootScript Specification 0.91, but adopted by PI 1.0 Spec. And they are needed for EdkII implementation. 4. Include/Framework/BootScript.h #define EFI_BOOT_SCRIPT_TABLE_OPCODE 0xAA #define EFI_BOOT_SCRIPT_TERMINATE_OPCODE 0xFF The two OPCODEs are *NOT* defined in Framework BootScript specification 0.91. EdkII introduces them to indicate the start or end of the boot script table. Keeping this inconsistency for backward compatibility. 5. Include/Protocol/BootScriptSave.h typedef EFI_STATUS (EFIAPI *EFI_BOOT_SCRIPT_CLOSE_TABLE) ( IN EFI_BOOT_SCRIPT_SAVE_PROTOCOL *This, ... ); The first parameter's type is *NOT* consistent with BootScript specification, in which it's defined as "struct _EFI_BOOT_SCRIPT_SAVE_PROTOCOL". Keeping this inconsistency for backward compatibility. 6. Include/Include/BootScriptExecuter.h typedef EFI_STATUS (EFIAPI *EFI_PEI_BOOT_SCRIPT_EXECUTE)( IN EFI_PEI_SERVICES **PeiServices, IN EFI_PEI_BOOT_SCRIPT_EXECUTER_PPI *This, ... ); The second parameter's type is *NOT* consistent with BootScript specification, in which it's defined as "struct _EFI_PEI_BOOT_SCRIPT_EXECUTER_PPI". Keeping this inconsistency for backward compatibility. ## # Mismatch with Intel Platform Innovation Framework for EFI DXE CIS (Version 0.91) ## 1. Include/Framework/DxeCis.h EFI_STATUS_CODE_ARCH_PROTOCOL is removed. EdkII doesn't provide EFI_STATUS_CODE_ARCH_PROTOCOL definition due to ReportStatusCode() field has been removed from EFI Runtime Service Table of PI specification. EFI_STATUS_CODE_ARCH_PROTOCOL is *NOT* required, and is replaced with EFI_STATUS_CODE_RUNTIME_PROTOCOL. ## # Mismatch with Intel Platform Innovation Framework for EFI Firmware Volume Specification (Version 0.9) ## 1. Include/Framework/FirmwareVolumeImageFormat.h #define EFI_AGGREGATE_AUTH_STATUS_ALL 0x00000f #define EFI_LOCAL_AUTH_STATUS_ALL 0x0f0000 The two macros are *NOT* defined in Framework FV specification 0.9. EdkII introduces them as a mask to calculate the value of authentication status. ## # Mismatch with Intel Platform Innovation Framework for EFI Human Interface Infrastructure Specification (Version 0.92) ## 1. Include/Protocol/FrameworkHii.h #define EFI_HII_PROTOCOL_GUID \ { \ 0xd7ad636e, 0xb997, 0x459b, {0xbf, 0x3f, 0x88, 0x46, 0x89, 0x79, 0x80, 0xe1} \ } The Framework HII specification 0.92 changed part of HII interfaces but did not update the protocol GUID. This change should cause a change of GUID in both of code and HII spec. EdkII updates the GUID in code, but the Framework HII specification 0.92 is not updated. This is a known issue. 2. Include/Protocol/FrameworkHii.h typedef struct { ... EFI_HANDLE COBExportHandle; } EFI_HII_HANDLE_PACK; The last field "COBExportHandle" of EFI_HII_HANDLE_PACK is *NOT* defined in the Framework HII specification 0.92. Keeping this inconsistency for backward compatibility. 3. Include/Protocol/FrameworkHii.h typedef struct { UINTN NumberOfPackages; EFI_GUID *GuidId; } EFI_HII_PACKAGES; The definition is *NOT* consistent with Framework HII specification 0.92, in which a field "HandlePack" is defined. EdkII changes the EFI_HII_PACKAGES to contain various number of packages of different types just after the structure as inline data, which will bring the flexibility on development. 4. Include/Protocol/FrameworkHii.h struct _EFI_HII_PROTOCOL { ... EFI_HII_RESET_STRINGS ResetStrings; ... }; The field listed above is *NOT* defined in Framework HII specification 0.92. EdkII adds this field to provide an ability of removing any new strings that were added after the initial string export for this handle. 5. Include/Protocol/FrameworkHii.h typedef EFI_STATUS (EFIAPI *EFI_HII_GLYPH_TO_BLT)( ... IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Foreground, IN EFI_GRAPHICS_OUTPUT_BLT_PIXEL Background, ... IN OUT EFI_GRAPHICS_OUTPUT_BLT_PIXEL *BltBuffer ); The type of the parameters listed above are *NOT* consistent with Framework HII specification 0.92, in which the type of these parameters is EFI_UGA_PIXEL. Here the definition uses the EFI_GRAPHICS_OUTPUT_BLT_PIXEL which defined in UEFI2.1 spec. Keeping this inconsistency for backward compatibility. 6. Include/Protocol/FrameworkHii.h typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT8 Flags; } EFI_IFR_SUPPRESS; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT8 Flags; } EFI_IFR_GRAY_OUT; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; STRING_REF Popup; UINT8 Flags; } EFI_IFR_INCONSISTENT; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT16 QuestionId; UINT8 Width; UINT16 Value; } FRAMEWORK_EFI_IFR_EQ_ID_VAL; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT16 QuestionId; UINT8 Width; UINT16 ListLength; UINT16 ValueList[1]; } FRAMEWORK_EFI_IFR_EQ_ID_LIST; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT16 QuestionId1; UINT8 Width; UINT16 QuestionId2; } FRAMEWORK_EFI_IFR_EQ_ID_ID; typedef struct { FRAMEWORK_EFI_IFR_OP_HEADER Header; UINT16 VariableId; UINT16 Value; } EFI_IFR_EQ_VAR_VAL; The defintions are not complied with Framework HII spec 0.92. Keeping the inconsistent for implementation needed. 7. Include/Protocol/FrameworkFormCallback.h #define RESET_REQUIRED 1 #define EXIT_REQUIRED 2 #define SAVE_REQUIRED 4 #define NV_CHANGED 8 #define NV_NOT_CHANGED 16 These macros are *NOT* defined in the Framework HII specification 0.92. These Flags are introduced to describe the standard behavior of the browser after the callback. Keeping this inconsistency for backward compatibility. 8. Include/Protocol/FrameworkFormCallback.h typedef EFI_STATUS (EFIAPI *EFI_NV_WRITE)( ... IN UINT32 Attributes, ... ); The definition is *NOT* consistent with Framework HII specification 0.92, in which the type of Attributes parameter is defined as "UINT32 *". EdkII changes the type of Attributes from UINT32 * to UINT32 because the input paramter is not necessary to use pointer date type. ## # Mismatch with Intel Platform Innovation Framework for PEI CIS Specification (Version 0.91) ## 1. Include/Ppi/ReadOnlyVariable.h #define EFI_VARIABLE_READ_ONLY 0x00000008 In Framework PeiCis specification 0.91, neither the macro or its value is defined. Keeping this inconsistency for backward compatibility. 2. Include/Ppi/FindFv.h typedef EFI_STATUS (EFIAPI *EFI_PEI_FIND_FV_FINDFV)( IN EFI_PEI_FIND_FV_PPI *This, IN EFI_PEI_SERVICES **PeiServices, IN UINT8 *FvNumber, IN OUT EFI_FIRMWARE_VOLUME_HEADER **FVAddress ); The definition is *NOT* consistent with Framework PeiCis specification 0.91. Compared with spec, the order of the first and second parameters is reversed. Keeping this inconsistency for backward compatibility. ## # Mismatch with Intel Platform Innovation Framework for EFI SMM CIS (Version 0.91) ## 1. Include/Guid/SmramMemoryReserve.h typedef struct { UINT32 NumberOfSmmReservedRegions; ... } EFI_SMRAM_HOB_DESCRIPTOR_BLOCK; 1) The name of the definition is *NOT* consistent with Framework SmmCis specification 0.91, in which it's defined as "EFI_HOB_SMRAM_DESCRIPTOR_BLOCK" rather than "EFI_SMRAM_HOB_DESCRIPTOR_BLOCK". Keeping this inconsistency for backward compatibility. 2) The definition of NumberOfSmmReservedRegions is *NOT* consistent with Framework SmmCis specification 0.91, in which the type of this field is defined as UINTN. However, HOBs are supposed to be CPU neutral, so UINTN is incorrect and UINT32 should be used. 2. Include/Guid/SmramMemoryReserve.h typedef enum { ... IchnIoTrap3, IchnIoTrap2, IchnIoTrap1, IchnIoTrap0, IchnPciExpress, IchnMonitor, IchnSpi, IchnQRT, IchnGpioUnlock, ... } EFI_SMM_ICHN_SMI_TYPE; The enumeration fields listed above are *NOT* defined in Framework SmmCis specification 0.91. EdkII introduces these fields to support new SMI types. 3. Include/Framework/SmmCis.h typedef union { /// /// The processor save-state information for IA-32 processors. /// EFI_SMI_CPU_SAVE_STATE Ia32SaveState; /// /// Note: Inconsistency with the Framework SMM CIS spec - Itanium save state not included. /// /// The processor save-state information for Itanium processors. /// /// EFI_PMI_SYSTEM_CONTEXT ItaniumSaveState; } EFI_SMM_CPU_SAVE_STATE; ## # Mismatch with Intel Platform Innovation Framework for EFI S3 Resume Boot Path Specification (Version 0.9) ## 1. Include/Protocol/AcpiS3Save.h typedef EFI_STATUS EFI_BOOTSERVICE (EFIAPI *EFI_ACPI_GET_LEGACY_MEMORY_SIZE) ( IN EFI_ACPI_S3_SAVE_PROTOCOL *This, OUT UINTN *Size ); The first parameter's type is *NOT* consistent with Framework S3Resume specification, in which it's defined as "struct _EFI_ACPI_S3_SAVE_PROTOCOL". Keeping this inconsistency for backward compatibility. 2. Include/Protocol/AcpiS3Save.h typedef EFI_STATUS (EFIAPI *EFI_ACPI_S3_SAVE) ( IN EFI_ACPI_S3_SAVE_PROTOCOL *This, IN VOID *LegacyMemoryAddress ); The first parameter's type is *NOT* consistent with Framework S3Resume specification, in which it's defined as "struct _EFI_ACPI_S3_SAVE_PROTOCOL". Also the EFI_BOOTSERVICE modifier is removed from the function declaration. 3. Include/Protocol/AcpiS3Save.h typedef EFI_STATUS (EFIAPI *EFI_ACPI_GET_LEGACY_MEMORY_SIZE)( IN EFI_ACPI_S3_SAVE_PROTOCOL *This, OUT UINTN *Size ); The first parameter's type is *NOT* consistent with Framework S3Resume specification, in which it's defined as "struct _EFI_ACPI_S3_SAVE_PROTOCOL". Also the EFI_BOOTSERVICE modifier is removed from the function declaration. ## # Mismatch with Intel Platform Innovation Framework for EFI ACPI Specification (Version 0.91) ## 1. Include/Protocol/AcpiSupport.h typedef EFI_STATUS (EFIAPI *EFI_ACPI_GET_ACPI_TABLE)( ... ); The function modifier is *NOT* consistent with Framework Acpi specification. The EFI_BOOTSERVICE modifier is removed from the function declaration. 2. Include/Protocol/AcpiSupport.h typedef EFI_STATUS (EFIAPI *EFI_ACPI_SET_ACPI_TABLE)( ... ); The function modifier is *NOT* consistent with Framework Acpi specification. The EFI_BOOTSERVICE modifier is removed from the function declaration. 3. Include/Protocol/AcpiSupport.h typedef EFI_STATUS (EFIAPI *EFI_ACPI_PUBLISH_TABLES)( ... ); The function modifier is *NOT* consistent with Framework Acpi specification. The EFI_BOOTSERVICE modifier is removed from the function declaration.