## @file MdeModulePkg.dec # This package provides the modules that conform to UEFI/PI Industry standards. # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes) # and libraries instances, which are used for those modules. # # Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
# This program and the accompanying materials are licensed and made available under # the terms and conditions of the BSD License that accompanies this distribution. # The full text of the license may be found at # http://opensource.org/licenses/bsd-license.php. # # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. # ## [Defines] DEC_SPECIFICATION = 0x00010005 PACKAGE_NAME = MdeModulePkg PACKAGE_UNI_FILE = MdeModulePkg.uni PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288 PACKAGE_VERSION = 0.96 [Includes] Include [LibraryClasses] ## @libraryclass IpIo layer upon EFI IP4 Protocol. # This library is only intended to be used by UEFI network stack modules. IpIoLib|Include/Library/IpIoLib.h ## @libraryclass Basic function for UEFI network stack. # This library is only intended to be used by UEFI network stack modules. NetLib|Include/Library/NetLib.h ## @libraryclass The helper routines to access UDP service. # This library is only intended to be used by UEFI network stack modules. UdpIoLib|Include/Library/UdpIoLib.h ## @libraryclass The helper routines to access TCP service. # This library is only intended to be used by UEFI network stack modules. TcpIoLib|Include/Library/TcpIoLib.h ## @libraryclass The helper routines to access HTTP service. # This library is only intended to be used by UEFI network stack modules. HttpLib|Include/Library/HttpLib.h ## @libraryclass Defines a set of methods to reset whole system. ResetSystemLib|Include/Library/ResetSystemLib.h ## @libraryclass Defines a set of methods related do S3 mode. # This library class is no longer used and modules using this library should # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification. S3Lib|Include/Library/S3Lib.h ## @libraryclass Defines a set of methods related recovery mode. # This library class is no longer used and modules using this library should # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification. RecoveryLib|Include/Library/RecoveryLib.h ## @libraryclass Provides HII related functions. HiiLib|Include/Library/HiiLib.h ## @libraryclass Defines a set of interfaces on how to process capusle image update. CapsuleLib|Include/Library/CapsuleLib.h ## @libraryclass Library for Deferred Procedure Calls. DpcLib|Include/Library/DpcLib.h ## @libraryclass Provides global variables that are pointers # to the UEFI HII related protocols. # UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement. # SecurityManagementLib|Include/Library/SecurityManagementLib.h ## @libraryclass OEM status code libary is used to report status code to OEM device. # OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h ## @libraryclass Debug Agent is used to provide soft debug capability. # DebugAgentLib|Include/Library/DebugAgentLib.h ## @libraryclass Provide platform specific hooks. # PlatformHookLib|Include/Library/PlatformHookLib.h ## @libraryclass Provide platform specific hooks for SMM core. # SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h ## @libraryclass Provide capability to maintain the data integrity cross S3 phase. # LockBoxLib|Include/Library/LockBoxLib.h ## @libraryclass Provide the CPU exception handler. # CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h ## @libraryclass Provides platform specific display interface. # CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h ## @libraryclass Provides sorting functions SortLib|Include/Library/SortLib.h ## @libraryclass Provides core boot manager functions UefiBootManagerLib|Include/Library/UefiBootManagerLib.h ## @libraryclass Provides core boot manager functions PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h ## @libraryclass Provides common interfaces about TPM measurement for other modules. # TpmMeasurementLib|Include/Library/TpmMeasurementLib.h ## @libraryclass Provides authenticated variable services. # AuthVariableLib|Include/Library/AuthVariableLib.h ## @libraryclass Provides variable check services and database management. # VarCheckLib|Include/Library/VarCheckLib.h ## @libraryclass Provides services to get variable error flag and do platform variable cleanup. # PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h ## @libraryclass Provides services to get do the file explorer. # FileExplorerLib|Include/Library/FileExplorerLib.h ## @libraryclass Provides image decoding service. # ImageDecoderLib|Include/Library/ImageDecoderLib.h ## @libraryclass Provides interfaces about logo display. # BootLogoLib|Include/Library/BootLogoLib.h ## @libraryclass Provides interfaces about Ipmi submit generic commond. # IpmiLib|Include/Library/IpmiLib.h ## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver. # PciHostBridgeLib|Include/Library/PciHostBridgeLib.h [Guids] ## MdeModule package token space guid # Include/Guid/MdeModulePkgTokenSpace.h gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }} ## Hob guid for Pcd DataBase # Include/Guid/PcdDataBaseHobGuid.h gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }} ## Guid for PCD DataBase signature. # Include/Guid/PcdDataBaseSignatureGuid.h gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }} ## Guid for EDKII implementation GUIDed opcodes # Include/Guid/MdeModuleHii.h gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }} ## Guid for Framework vfr GUIDed opcodes. # Include/Guid/MdeModuleHii.h gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }} ## Guid to specify the System Non Volatile FV # Include/Guid/SystemNvDataGuid.h gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }} ## GUID used as the signature of FTW working block header. # Include/Guid/SystemNvDataGuid.h gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }} ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done. # Include/Guid/FaultTolerantWrite.h gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }} ## Guid specify the device is the console out device. # Include/Guid/ConsoleOutDevice.h gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} ## Guid specify the device is the console in device. # Include/Guid/ConsoleInDevice.h gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} ## Hob and Variable guid specify the platform memory type information. # Include/Guid/MemoryTypeInformation.h gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }} ## Capsule update hob and variable guid # Include/Guid/CapsuleVendor.h gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }} ## Guid specifiy the device is the StdErr device. # Include/Guid/StandardErrorDevice.h gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }} ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table. # Include/Guid/VariableFormat.h gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }} ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table. # Include/Guid/AuthenticatedVariableFormat.h gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } } # Include/Guid/VariableIndexTable.h gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }} ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready. # Include/Guid/SmmVariableCommon.h gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }} ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID # Include/Guid/Performance.h gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } } gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } } gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } } gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } } ## Guid is defined for CRC32 encapsulation scheme. # Include/Guid/Crc32GuidedSectionExtraction.h gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } } ## Include/Guid/StatusCodeCallbackGuid.h gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}} ## GUID identifies status code records HOB that originate from the PEI status code # Include/Guid/MemoryStatusCodeRecord.h gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }} ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI # Include/Guid/StatusCodeDataTypeDebug.h gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }} ## A configuration Table Guid for Load module at fixed address # Include/Guid/LoadModuleAtFixedAddress.h gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } } ## GUID used to store the global debug mask value into an EFI Variable # Include/Guid/DebugMask.h gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} } ## Event for the DXE Core to signal idle events # Include/Guid/EventIdle.h gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } } ## Include/Guid/RecoveryDevice.h gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }} ## Include/Guid/RecoveryDevice.h gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }} ## Include/Guid/RecoveryDevice.h gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }} ## Include/Guid/RecoveryDevice.h gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }} ## Include/Guid/SmmLockBox.h gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }} ## Include/Guid/AcpiS3Context.h gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }} ## Include/Guid/AcpiS3Context.h gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }} ## Include/Guid/BootScriptExecutorVariable.h gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }} gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }} ## Include/Guid/UsbKeyBoardLayout.h gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }} gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }} ## Include/Guid/HiiResourceSampleHii.h gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }} ## Include/Guid/DriverSampleHii.h gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }} gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }} gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }} ## Include/Guid/PlatDriOverrideHii.h gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }} ## Include/Guid/Ip4Config2Hii.h gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }} ## Include/Guid/VlanConfigHii.h gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }} ## Include/Guid/Ip4IScsiConfigHii.h gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }} gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }} ## Include/Guid/ZeroGuid.h gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}} ## Include/Guid/MtcVendor.h gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }} ## Guid for Firmware Performance Data Table (FPDT) implementation. # Include/Guid/FirmwarePerformance.h gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }} gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }} ## Include/Guid/ExitBootServiceFailed.h gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } } ## Include/Guid/ConnectConInEvent.h gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }} ## Include/Guid/StatusCodeDataTypeVariable.h gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }} ## Include/Guid/MemoryProfile.h gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }} ## Include/Protocol/VarErrorFlag.h gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } } ## GUID indicates the LZMA custom compress/decompress algorithm. # Include/Guid/LzmaDecompress.h gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }} gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }} ## Include/Guid/TtyTerm.h gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }} ## Include/Guid/HiiBootMaintenanceFormset.h gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }} gEfiIfrFrontPageGuid = { 0xe58809f8, 0xfbc1, 0x48e2, { 0x88, 0x3a, 0xa3, 0x0f, 0xdc, 0x4b, 0x44, 0x1e } } ## Include/Guid/RamDiskHii.h gRamDiskFormSetGuid = { 0x2a46715f, 0x3581, 0x4a55, { 0x8e, 0x73, 0x2b, 0x76, 0x9a, 0xaa, 0x30, 0xc5 }} [Ppis] ## Include/Ppi/AtaController.h gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }} ## Include/Ppi/UsbHostController.h gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }} ## Include/Ppi/Usb2HostController.h gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }} ## Include/Ppi/UsbController.h gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }} ## Include/Ppi/UsbIo.h gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }} ## Include/Ppi/SecPerformance.h gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }} ## Include/Ppi/SmmCommunication.h gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }} ## Include/Ppi/SmmAccess.h gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }} ## Include/Ppi/SmmControl.h gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }} ## Include/Ppi/PostBootScriptTable.h gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}} ## Include/Ppi/SerialPortPei.h gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}} ## Include/Ppi/UfsHostController.h gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }} ## Include/Ppi/IpmiPpi.h gPeiIpmiPpiGuid = { 0xa9731431, 0xd968, 0x4277, { 0xb7, 0x52, 0xa3, 0xa9, 0xa6, 0xae, 0x18, 0x98 }} [Protocols] ## Load File protocol provides capability to load and unload EFI image into memory and execute it. # Include/Protocol/LoadPe32Image.h # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image. # If developer need implement such functionality, they should use BasePeCoffLib. gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }} ## Print protocol defines basic print functions to print the format unicode and ascii string. # Include/Protocol/Print2.h gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } } ## This protocol defines the generic memory test interfaces in Dxe phase. # Include/Protocol/GenericMemoryTest.h gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }} ## Include/Protocol/Dpc.h gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }} ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices. # Include/Protocol/FaultTolerantWrite.h gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }} ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment. # Include/Protocol/SmmFaultTolerantWrite.h gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }} ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV. # Include/Protocol/SwapAddressRange.h gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }} ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment. # Include/Protocol/SmmSwapAddressRange.h gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }} ## This protocol is intended for use as a means to store data in the EFI SMM environment. # Include/Protocol/SmmVariableProtocol.h gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }} ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled. # Include/Protocol/VariableLock.h gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }} ## Include/Protocol/VarCheck.h gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } } ## Include/Protocol/SmmVarCheck.h gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } } ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment. # Include/Protocol/SmmFirmwareVolumeBlock.h gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }} ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules # Include/Guid/DebugMask.h gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} } ## Include/Protocol/LockBox.h gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }} ## Include/Protocol/FormBrowserEx.h gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } } ## Include/Protocol/EbcVmTest.h gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } } ## Include/Protocol/EbcSimpleDebugger.h gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } } ## Include/Protocol/BootLogo.h gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } } ## Include/Protocol/DisplayProtocol.h gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } } ## Include/Protocol/FormBrowserEx2.h gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } } ## Include/Protocol/UfsHostController.h gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } } ## Include/Protocol/EsrtManagement.h gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }} ## Include/Protocol/SmmExitBootServices.h gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } } ## Include/Protocol/SmmLegacyBoot.h gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } } ## Include/Protocol/SmmReadyToBoot.h gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } } ## Include/Protocol/PlatformLogo.h gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } } ## Include/Protocol/FileExplorer.h gEfiFileExplorerProtocolGuid = { 0x2C03C536, 0x4594, 0x4515, { 0x9E, 0x7A, 0xD3, 0xD2, 0x04, 0xFE, 0x13, 0x63 } } ## Include/Protocol/IpmiProtocol.h gIpmiProtocolGuid = { 0xdbc6381f, 0x5554, 0x4d14, { 0x8f, 0xfd, 0x76, 0xd7, 0x87, 0xb8, 0xac, 0xbf } } gSmmIpmiProtocolGuid = { 0x5169af60, 0x8c5a, 0x4243, { 0xb3, 0xe9, 0x56, 0xc5, 0x6d, 0x18, 0xee, 0x26 } } # # [Error.gEfiMdeModulePkgTokenSpaceGuid] # 0x80000001 | Invalid value provided. # 0x80000002 | Reserved bits must be set to zero. # 0x80000003 | Incorrect progress code provided. # 0x80000004 | Invalid foreground color specified. # 0x80000005 | Invalid background color specified. # 0x80000006 | Incorrect error code provided. # [PcdsFeatureFlag] ## Indicates if the platform can support update capsule across a system reset.

# TRUE - Supports update capsule across a system reset.
# FALSE - Does not support update capsule across a system reset.
# @Prompt Enable update capsule across a system reset. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d ## Indicates if all PCD PPI services will be enabled.

# TRUE - All PCD PPI services will be produced.
# FALSE - Minimal PCD PPI services (only GetService) will be produced.
# @Prompt Enable full PEI PCD services. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020 ## Indicates if the Device Path To Text Protocol should be produced by the platform. # It can be disabled to save size.

# TRUE - Device Path To Text Protocol will be produced.
# FALSE - Device Path To Text Protocol will not be produced.
# @Prompt Enable Device Path to Text support. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037 ## Indicates if the Device Path From Text Protocol should be produced by the platform. # It can be disabled to save size.

# TRUE - Device Path From Text Protocol will be produced.
# FALSE - Device Path From Text Protocol will not be produced.
# @Prompt Enable Device Path From Text support. gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038 ## Indicates if the statistics about variable usage will be collected. This information is # stored as a vendor configuration table into the EFI system table. # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get # variable usage info. VariableInfo application will not output information if not set to TRUE.

# TRUE - Statistics about variable usage will be collected.
# FALSE - Statistics about variable usage will not be collected.
# @Prompt Enable variable statistics collection. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f ## Indicates if Unicode Collation Protocol will be installed.

# TRUE - Installs Unicode Collation Protocol.
# FALSE - Does not install Unicode Collation Protocol.
# @Prompt Enable Unicode Collation support. gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040 ## Indicates if Unicode Collation 2 Protocol will be installed.

# TRUE - Installs Unicode Collation 2 Protocol.
# FALSE - Does not install Unicode Collation 2 Protocol.
# @Prompt Enable Unicode Collation 2 support. gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041 ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe. # It could be set FALSE to save size.

# TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.
# FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.
# @Prompt Enable ConOut GOP support. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042 ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe. # It could be set FALSE to save size.

# TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.
# FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.
# @Prompt Enable ConOut UGA support. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043 ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module. # This PCD is used to tune PEI phase performance to reduce the search image time. # It can be set according to the generated image section type.

# TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.
# FALSE - PeiCore will first search PE section from PEIM to load the image.
# @Prompt PeiCore search TE section first. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044 ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI # interrupt to access usb device in the case of absence of usb stack. # DUET platform requires the token to be TRUE.

# TRUE - Turn off usb legacy support.
# FALSE - Does not turn off usb legacy support.
# @Prompt Turn off USB legacy support. gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047 ## Indicates if HiiImageProtocol will be installed. # FALSE is for size reduction.

# TRUE - Installs HiiImageProtocol.
# FALSE - Does not install HiiImageProtocol.
# @Prompt Enable HII image support. gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100 ## Indicates if USB KeyBoard Driver disables the default keyboard layout. # The default keyboard layout serves as the backup when no keyboard layout can be retrieved # from HII database.

# TRUE - USB KeyBoard Driver will disable the default keyboard layout.
# FALSE - USB KeyBoard Driver will not disable the default keyboard layout.
# @Prompt Disable default keyboard layout in USB KeyBoard Driver. gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200 ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.

# TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
# FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler. # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.
# @Prompt Enable framework backward compatibility support. gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009 ## Indicates if HelloWorld Application will print the verbose information. # This PCD is a sample to explain FeatureFlag PCD usage.

# TRUE - HelloWorld Application will print the verbose information.
# FALSE - HelloWorld Application will not print the verbose information.
# @Prompt Enable HelloWorld print. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a ## Indicates if FULL FTW protocol services (total six APIs) will be produced.

# TRUE - Produces FULL FTW protocol services (total six APIs).
# FALSE - Only FTW Write service is available.
# @Prompt Enable FULL FTW services. gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b ## Indicates if DXE IPL supports the UEFI decompression algorithm.

# TRUE - DXE IPL will support UEFI decompression.
# FALSE - DXE IPL will not support UEFI decompression to save space.
# @Prompt Enable UEFI decompression support in DXE IPL. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c ## Indicates if PciBus driver supports the hot plug device.

# TRUE - PciBus driver supports the hot plug device.
# FALSE - PciBus driver doesn't support the hot plug device.
# @Prompt Enable PciBus hot plug device support. gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.

# TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.
# FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.
# @Prompt Enable PCI bridge IO alignment probe. gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e ## Indicates if StatusCode is reported via Serial port.

# TRUE - Reports StatusCode via Serial port.
# FALSE - Does not report StatusCode via Serial port.
# @Prompt Enable StatusCode via Serial port. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022 ## Indicates if StatusCode is stored in memory. # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.

# TRUE - Stores StatusCode in memory.
# FALSE - Does not store StatusCode in memory.
# @Prompt Enable StatusCode via memory. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023 ## Indicates if PEI phase StatusCode will be replayed in DXE phase.

# TRUE - Replays PEI phase StatusCode in DXE phased.
# FALSE - Does not replay PEI phase StatusCode in DXE phase.
# @Prompt Enable PEI StatusCode replay in DXE phase gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d ## Indicates if ACPI SDT protocol will be installed.

# TRUE - Installs ACPI SDT protocol.
# FALSE - Does not install ACPI SDT protocol.
# @Prompt Enable ACPI SDT support. gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled. # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.

# TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.
# FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.
# @Prompt Enable unaligned PCI I/O support. gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.

# TRUE - TEXT statement will always be set to GrayOut.
# FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
# @Prompt Always GrayOut TEXT statement. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f ## Indicates if unselectable menu should be gray out in HII Form Browser.

# TRUE - The unselectable menu will be set to GrayOut.
# FALSE - The menu will be show as normal menu entry even if it is not selectable.
# @Prompt GrayOut read only menu. gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070 ## Indicates if recovery from IDE disk will be supported.

# TRUE - Supports recovery from IDE disk.
# FALSE - Does not support recovery from IDE disk.
# @Prompt Enable recovery on IDE disk. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060 ## Indicates if recovery from FAT floppy disk will be supported.

# TRUE - Supports recovery from FAT floppy disk.
# FALSE - Does not support recovery from FAT floppy disk.
# @Prompt Enable recovery on FAT floppy disk. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061 ## Indicates if recovery from data CD will be supported.

# TRUE - Supports recovery from data CD.
# FALSE - Does not support recovery from data CD.
# @Prompt Enable recovery on data CD. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062 ## Indicates if recovery from FAT USB disk will be supported.

# TRUE - Supports recovery from USB disk.
# FALSE - Does not support recovery from USB disk.
# @Prompt Enable recovery on FAT USB disk. gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063 ## Indicates if S3 performance data will be supported in ACPI FPDT table.

# TRUE - S3 performance data will be supported in ACPI FPDT table.
# FALSE - S3 performance data will not be supported in ACPI FPDT table.
# @Prompt Enable S3 performance data support. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064 ## Indicates if Serial device uses half hand shake.

# TRUE - Serial device uses half hand shake.
# FALSE - Serial device doesn't use half hand shake.
# @Prompt Enable Serial device Half Hand Shake gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHalfHandshake|FALSE|BOOLEAN|0x00010073 ## Indicates if HII data and configuration has been exported.

# Add this PCD mainly consider the use case of simulator. This PCD maybe set to FALSE for # simulator platform because the performance cost for this feature. # TRUE - Export HII data and configuration data.
# FALSE - Does not export HII data and configuration.
# @Prompt Enable export HII data and configuration to be used in OS runtime. gEfiMdeModulePkgTokenSpaceGuid.PcdHiiOsRuntimeSupport|TRUE|BOOLEAN|0x00010074 [PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64] ## Indicates if DxeIpl should switch to long mode to enter DXE phase. # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore # is built in firmware.

# TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.
# FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
# @Prompt DxeIpl switch to long mode. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b ## Indicates if DxeIpl should rebuild page tables. This flag only # makes sense in the case where the DxeIpl and the DxeCore are both X64.

# TRUE - DxeIpl will rebuild page tables.
# FALSE - DxeIpl will not rebuild page tables.
# @Prompt DxeIpl rebuild page tables. gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c [PcdsFixedAtBuild] ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.

# 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.
# 0: Disable the feature.
# Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.
# @Prompt Enable LMFA feature. # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF) gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015 ## Progress Code for OS Loader LoadImage start.

# PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000
# @Prompt Progress Code for OS Loader LoadImage start. # @ValidList 0x80000003 | 0x03058000 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030 ## Progress Code for OS Loader StartImage start.

# PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001
# @Prompt Progress Code for OS Loader StartImage start. # @ValidList 0x80000003 | 0x03058001 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031 ## Progress Code for S3 Suspend start.

# PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000
# @Prompt Progress Code for S3 Suspend start. # @ValidList 0x80000003 | 0x03078000 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032 ## Progress Code for S3 Suspend end.

# PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001
# @Prompt Progress Code for S3 Suspend end. # @ValidList 0x80000003 | 0x03078001 gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033 ## Error Code for SetVariable failure.

# EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002
# @Prompt Error Code for SetVariable failure. # @ValidList 0x80000006 | 0x03058002 gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040 [PcdsFixedAtBuild, PcdsPatchableInModule] ## Dynamic type PCD can be registered callback function for Pcd setting action. # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function # for a dynamic PCD used in PEI phase. # @Prompt Max PEI PCD callback number per PCD entry. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress # to store PCD value. # @Prompt VPD base address. gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010 ## Maximum number of FV is supported by PeiCore's dispatching. # @Prompt Maximum number of FV supported by PeiCore. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030 ## Maximum File count in every FV is supported by PeiCore's dispatching. # PeiCore supported File type includes PEIM, Combined PEIM and FV. # @Prompt Maximum File count per FV supported by PeiCore. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031 ## Maximum stack size for PeiCore. # @Prompt Maximum stack size for PeiCore. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032 ## Maximum PPI count is supported by PeiCore's PPI database. # @Prompt Maximum PPI count supported by PeiCore. gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033 ## The maximum size of a single non-HwErr type variable. # @Prompt Maximum variable size. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003 ## The maximum size of a single authenticated variable. # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize. # @Prompt Maximum authenticated variable size. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009 ## The maximum size of single hardware error record variable.

# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
# @Prompt Maximum HwErr variable size. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004 ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)). # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region. # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)). # this value is used to guarantee the space of HwErr type variable and not populated by common variable. # @Prompt HwErr variable storage size. gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006 ## The size of maximum user NV variable space.

# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).
# If the value is 0, it means user variable share the same NV storage with system variable, # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.
# If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol, # otherwise the variable will be regarded as user variable.
# 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).
# 2) Variables managed by Variable driver internally.
# 3) Variables need to be locked, they MUST be set by VariableLock protocol.
# 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.
# The PCD is used to guarantee the space of system variable and not populated by user variable.
# @Prompt Maximum user NV variable space size. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009 ## The size of NV variable space reserved at UEFI boottime.

# Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).
# In EdkII implementation, variable driver can reserved some NV storage region for boottime settings. # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.
# Then the common NV variable space size at boottime will be # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),
# and the common NV variable space size at runtime will be # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.
# @Prompt Boottime reserved NV variable space size. gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007 ## Reclaim variable space at EndOfDxe.

# The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.
# If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.
# @Prompt Reclaim variable space at EndOfDxe. gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008 ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables. # @Prompt Variable storage size. gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005 ## FFS filename to find the ACPI tables. # @Prompt FFS name of ACPI tables storage. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016 ## FFS filename to find the capsule coalesce image. # @Prompt FFS name of capsule coalesce image. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017 ## Maximum number of performance log entries during PEI phase. # Use PcdMaxPeiPerformanceLogEntries16 if the number of entries required is # more than 255. # @Prompt Maximum number of PEI performance log entries. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f ## Maximum number of performance log entries during PEI phase. # If set to 0, then PcdMaxPeiPerformanceLogEntries determines the number of # entries. If greater than 0, then this PCD determines the number of entries, # and PcdMaxPeiPerformanceLogEntries is ignored. # @Prompt Maximum number of PEI performance log entries. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035 ## RTC Update Timeout Value(microsecond). # @Prompt RTC Update Timeout Value. gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034 ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.

# TRUE - 16550 serial port registers are in MMIO space.
# FALSE - 16550 serial port registers are in I/O space.
# @Prompt Serial port registers use MMIO. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000 ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.

# TRUE - 16550 serial port hardware flow control will be enabled.
# FALSE - 16550 serial port hardware flow control will be disabled.
# @Prompt Enable serial port hardware flow control. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001 ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE. # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.

# TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.
# FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.
# @Prompt Enable serial port cable detetion. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006 ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8. # @Prompt Base address of serial port registers. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002 ## Baud rate for the 16550 serial port. Default is 115200 baud. # @Prompt Baud rate for serial port. # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003 ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.

# BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits
# BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.
# BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity
# BIT7..BIT6 - Reserved. Must be 0.
# # Default is No Parity, 8 Data Bits, 1 Stop Bit.
# @Prompt Serial port Line Control settings. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004 ## FIFO Control Register (FCR) for the 16550 serial port.

# BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.
# BIT1 - Clear receive FIFO. 1 = Clear FIFO.
# BIT2 - Clear transmit FIFO. 1 = Clear FIFO.
# BIT4..BIT3 - Reserved. Must be 0.
# BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO
# BIT7..BIT6 - Reserved. Must be 0.
# # Default is to enable and clear all FIFOs.
# @Prompt Serial port FIFO Control settings. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0 gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005 ## This setting can override the default TFTP block size. A value of 0 computes # the default from MTU information. A non-zero value will be used as block size # in bytes. # @Prompt TFTP block size. gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026 ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER # structure. The default value for this PCD is 0, which means that the DXE Core # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB # boundary as close to the top of memory as feasible. If this PCD is set to a # value other than 0, then the DXE Core will first attempt to allocate the # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified # by this PCD, and if that allocation fails, retry the allocation on a 4MB # boundary as close to the top of memory as feasible. # @Prompt Maximum Efi System Table Pointer address. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027 ## Indicates if to shadow PEIM on S3 boot path after memory is ready.

# TRUE - Shadow PEIM on S3 boot path after memory is ready.
# FALSE - Not shadow PEIM on S3 boot path after memory is ready.
# @Prompt Shadow Peim On S3 Boot. gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028 ## Indicates if to shadow PEIM and PeiCore after memory is ready.

# This PCD is used on other boot path except for S3 boot. # TRUE - Shadow PEIM and PeiCore after memory is ready.
# FALSE - Not shadow PEIM after memory is ready.
# @Prompt Shadow Peim and PeiCore on boot gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029 ## The mask is used to control memory profile behavior.

# BIT0 - Enable UEFI memory profile.
# BIT1 - Enable SMRAM profile.
# @Prompt Memory Profile Property. # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0 gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041 ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.

# For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.
# # Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0001
# EfiLoaderCode 0x0002
# EfiLoaderData 0x0004
# EfiBootServicesCode 0x0008
# EfiBootServicesData 0x0010
# EfiRuntimeServicesCode 0x0020
# EfiRuntimeServicesData 0x0040
# EfiConventionalMemory 0x0080
# EfiUnusableMemory 0x0100
# EfiACPIReclaimMemory 0x0200
# EfiACPIMemoryNVS 0x0400
# EfiMemoryMappedIO 0x0800
# EfiMemoryMappedIOPortSpace 0x1000
# EfiPalCode 0x2000
# EfiPersistentMemory 0x4000
# OEM Reserved 0x4000000000000000
# OS Reserved 0x8000000000000000
# # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.
# # @Prompt Memory profile memory type. gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042 ## PCI Serial Device Info. It is an array of Device, Function, and Power Management # information that describes the path that contains zero or more PCI to PCI briges # followed by a PCI serial device. Each array entry is 4-bytes in length. The # first byte is the PCI Device Number, then second byte is the PCI Function Number, # and the last two bytes are the offset to the PCI power management capabilities # register used to manage the D0-D3 states. If a PCI power management capabilities # register is not present, then the last two bytes in the offset is set to 0. The # array is terminated by an array entry with a PCI Device Number of 0xFF. For a # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF. # @Prompt Pci Serial Device Info gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067 ## PCI Serial Parameters. It is an array of VendorID, DeviceID, ClockRate, Offset, # BarIndex, RegisterStride, ReceiveFifoDepth, TransmitFifoDepth information that # describes the parameters of special PCI serial devices. # Each array entry is 24-byte in length. The array is terminated # by an array entry with a PCI Vendor ID of 0xFFFF. If a platform only contains a # standard 16550 PCI serial device whose class code is 7/0/2, the value is 0xFFFF. # The C style structure is defined as below:
# typedef struct {
# UINT16 VendorId; ///< Vendor ID to match the PCI device. The value 0xFFFF terminates the list of entries.
# UINT16 DeviceId; ///< Device ID to match the PCI device.
# UINT32 ClockRate; ///< UART clock rate. Set to 0 for default clock rate of 1843200 Hz.
# UINT64 Offset; ///< The byte offset into to the BAR.
# UINT8 BarIndex; ///< Which BAR to get the UART base address.
# UINT8 RegisterStride; ///< UART register stride in bytes. Set to 0 for default register stride of 1 byte.
# UINT16 ReceiveFifoDepth; ///< UART receive FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
# UINT16 TransmitFifoDepth; ///< UART transmit FIFO depth in bytes. Set to 0 for a default FIFO depth of 16 bytes.
# UINT8 Reserved[2];
# } PCI_SERIAL_PARAMETER;
# It contains zero or more instances of the above structure.
# For example, if a PCI device contains two UARTs, PcdPciSerialParameters needs # to contain two instances of the above structure, with the VendorId and DeviceId # equals to the Device ID and Vendor ID of the device; If the PCI device uses the # first two BARs to support two UARTs, BarIndex of first instance equals to 0 and # BarIndex of second one equals to 1; If the PCI device uses the first BAR to # support both UARTs, BarIndex of both instance equals to 0, Offset of first # instance equals to 0 and Offset of second one equals to a value bigger than or # equal to 8.
# For certain UART whose register needs to be accessed in DWORD aligned address, # RegisterStride equals to 4. # @Prompt Pci Serial Parameters gEfiMdeModulePkgTokenSpaceGuid.PcdPciSerialParameters|{0xFF, 0xFF}|VOID*|0x00010071 ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. # @Prompt Serial Port Extended Transmit FIFO Size in Bytes gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068 ## This PCD points to the file name GUID of the BootManagerMenuApp # Platform can customize the PCD to point to different application for Boot Manager Menu # @Prompt Boot Manager Menu File gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b ## This PCD points to the formset GUID of the driver health management form # The form will be popped up by BDS core when there are Configuration Required driver health intances. # Platform can customize the PCD to point to different formset. # @Prompt Driver Health Management Form gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c ## The number of bytes between registers in serial device. The default is 1 byte. # @Prompt Serial Port Register Stride in Bytes gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.

# Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.
# If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.
# @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation. gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A ## Indicates which ACPI versions are targeted by the ACPI tables exposed to the OS # These values are aligned with the definitions in MdePkg/Include/Protocol/AcpiSystemDescriptionTable.h # BIT 1 - EFI_ACPI_TABLE_VERSION_1_0B.
# BIT 2 - EFI_ACPI_TABLE_VERSION_2_0.
# BIT 3 - EFI_ACPI_TABLE_VERSION_3_0.
# BIT 4 - EFI_ACPI_TABLE_VERSION_4_0.
# BIT 5 - EFI_ACPI_TABLE_VERSION_5_0.
# @Prompt Exposed ACPI table versions. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x3E|UINT32|0x0001004c [PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## This PCD defines the Console output row. The default value is 25 according to UEFI spec. # This PCD could be set to 0 then console output would be at max column and max row. # @Prompt Console output row. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006 ## This PCD defines the Console output column. The default value is 80 according to UEFI spec. # This PCD could be set to 0 then console output would be at max column and max row. # @Prompt Console output column. gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007 ## This PCD defines the video horizontal resolution. # If this PCD is set to 0 then video resolution would be at highest resolution. # @Prompt Video horizontal resolution. gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009 ## This PCD defines the video vertical resolution. # If this PCD is set to 0 then video resolution would be at highest resolution. # @Prompt Video vertical resolution. gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a # The 4 PCDs below are used to specify the video resolution and text mode of text setup. # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution, # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file. # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work # for text setup. ## Specify the video horizontal resolution of text setup. # @Prompt Video Horizontal Resolution of Text Setup gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b ## Specify the video vertical resolution of text setup. # @Prompt Video Vertical Resolution of Text Setup gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c ## Specify the console output column of text setup. # @Prompt Console Output Column of Text Setup gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d ## Specify the console output row of text setup. # @Prompt Console Output Row of Text Setup gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## UART clock frequency is for the baud rate configuration. # @Prompt Serial Port Clock Rate. gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066 ## This PCD points to the front page formset GUID # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page # @Prompt Front Page Formset. gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e ## Base address of the NV variable range in flash device. # @Prompt Base address of flash NV variable range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001 ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize. # The root cause is that variable driver will use FTW protocol to reclaim variable region. # If the length of variable region is larger than FTW spare size, it means the whole variable region can not # be reflushed through the manner of fault tolerant write. # @Prompt Size of flash NV variable range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002 ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. # @Prompt Base address of flash FTW spare block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned. # The root cause is that variable driver will use FTW protocol to reclaim variable region. # If the length of variable region is larger than FTW spare size, it means the whole variable region can not # be reflushed through the manner of fault tolerant write. # @Prompt Size of flash FTW spare block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014 ## Base address of the FTW working block range in flash device. # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned. # @Prompt Base address of flash FTW working block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 ## Size of the FTW working block range. # If the value is less than one block size, the work space range should not span blocks. # If the value is larger than one block size, it should be block size aligned. # @Prompt Size of flash FTW working block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011 ## 64-bit Base address of the NV variable range in flash device. # @Prompt 64-bit Base address of flash NV variable range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001 ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned. # @Prompt 64-bit Base address of flash FTW spare block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013 ## 64-bit Base address of the FTW working block range in flash device. # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned. # @Prompt 64-bit Base address of flash FTW working block range. gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010 ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store. # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize. # @Prompt Reserved memory range for EMU variable NV storage. gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008 ## This PCD defines the times to print hello world string. # This PCD is a sample to explain UINT32 PCD usage. # @Prompt HellowWorld print times. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005 ## This PCD defines the HelloWorld print string. # This PCD is a sample to explain String typed PCD usage. # @Prompt HelloWorld print string. gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 ## Indicates the maximum size of the capsule image with a reset flag that the platform can support. # The default max size is 100MB (0x6400000) for more than one large capsule images. # @Prompt Max size of populated capsule. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e ## Indicates the maximum size of the capsule image without a reset flag that the platform can support. # The default max size is 10MB (0xa00000) for the casule image without reset flag setting. # @Prompt Max size of non-populated capsule. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table. # @Prompt Firmware vendor. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050 ## Firmware revision that is the default revision filled into the EFI System Table. # @Prompt Firmware revision. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051 ## Null-terminated Unicode string that describes the firmware version. # @Prompt Firmware version string. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052 ## Null-terminated Unicode string that contains the date the firmware was released # @Prompt Firmware release data string. gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053 ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true. # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.

# The default value in PeiPhase is 1 KBytes.
# The default value in DxePhase is 128 KBytes.
# @Prompt StatusCode memory size. gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054 ## Indicates if to reset system when memory type information changes.

# TRUE - Resets system when memory type information changes.
# FALSE - Does not reset system when memory type information changes.
# @Prompt Reset on memory type information change. gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056 ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE. # Only following values defined in UEFI specification are valid:

# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
# @Prompt Foreground color for browser subtile. # @ValidRange 0x80000004 | 0x00 - 0x0F gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057 ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK. # Only following values defined in UEFI specification are valid:

# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
# @Prompt Foreground color for browser field. # @ValidRange 0x80000004 | 0x00 - 0x0F gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058 ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser. # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:

# 0x00 (EFI_BLACK)
# 0x01 (EFI_BLUE)
# 0x02 (EFI_GREEN)
# 0x03 (EFI_CYAN)
# 0x04 (EFI_RED)
# 0x05 (EFI_MAGENTA)
# 0x06 (EFI_BROWN)
# 0x07 (EFI_LIGHTGRAY)
# 0x08 (EFI_DARKGRAY)
# 0x09 (EFI_LIGHTBLUE)
# 0x0A (EFI_LIGHTGREEN)
# 0x0B (EFI_LIGHTCYAN)
# 0x0C (EFI_LIGHTRED)
# 0x0D (EFI_LIGHTMAGENTA)
# 0x0E (EFI_YELLOW)
# 0x0F (EFI_WHITE)
# @Prompt Foreground color for highlighted browser field. # @ValidRange 0x80000004 | 0x00 - 0x0F gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059 ## Specify the background color for highlighted prompt and Question value text in HII Form Browser. # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:

# 0x00 (EFI_BACKGROUND_BLACK)
# 0x10 (EFI_BACKGROUND_BLUE)
# 0x20 (EFI_BACKGROUND_GREEN)
# 0x30 (EFI_BACKGROUND_CYAN)
# 0x40 (EFI_BACKGROUND_RED)
# 0x50 (EFI_BACKGROUND_MAGENTA)
# 0x60 (EFI_BACKGROUND_BROWN)
# 0x70 (EFI_BACKGROUND_LIGHTGRAY)
# @Prompt Background color for highlighted browser field. # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70 gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A ## Time in second to delay for SATA devices to spin-up for recovery. # @Prompt SATA spin-up delay time in second for recovery path. gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2. # When changing the value of this PCD, the platform developer should make sure the memory size is # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase. # @Prompt Reserved page number for S3 Boot Script Runtime Table. gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase. # The default size is 32K. When changing the value of this PCD, the platform developer should # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path. # @Prompt Stack size for CapsulePei transfer to long mode. gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D ## Indicates if 1G page table will be enabled.

# TRUE - 1G page table will be enabled.
# FALSE - 1G page table will not be enabled.
# @Prompt Enable 1G page table support. gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E ## Indicates if the Single Root I/O virtualization is supported.

# TRUE - Single Root I/O virtualization is supported.
# FALSE - Single Root I/O virtualization is not supported.
# @Prompt Enable SRIOV support. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044 ## Indicates if the Alternative Routing-ID is supported.

# TRUE - Alternative Routing-ID is supported.
# FALSE - Alternative Routing-ID is not supported.
# @Prompt Enable ARI support. gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045 ## Indicates if the Multi Root I/O virtualization is supported.

# TRUE - Multi Root I/O virtualization is supported.
# FALSE - Multi Root I/O virtualization is not supported.
# @Prompt Enable MRIOV support. gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046 ## Single root I/O virtualization virtual function memory BAR alignment.

# BITN set indicates 2 of n+12 power
# BIT0 set indicates 4KB alignment
# BIT1 set indicates 8KB alignment
# @Prompt SRIOV system page size. gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047 ## SMBIOS version. # @Prompt SMBIOS version. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055 ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure. # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A ## SMBIOS produce method. # BIT0 set indicates 32-bit entry point and table are produced.
# BIT1 set indicates 64-bit entry point and table are produced.
# @Prompt The policy to produce SMBIOS entry point and table. gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069 ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for # the extension FPDT boot records received after ReadyToBoot and before ExitBootService. # @Prompt Pad size for extension FPDT boot records. gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F ## Indicates if ConIn device are connected on demand.

# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced # by Consplitter should be called before any real key read operation.
# FALSE - ConIn device may be connected normally during BDS.
# @Prompt ConIn connect on demand. gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060 ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.

# TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.
# FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.
# @Prompt Enable ATA S.M.A.R.T feature. gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065 ## Indicates if full PCI enumeration is disabled.

# TRUE - Full PCI enumeration is disabled.
# FALSE - Full PCI enumeration is not disabled.
# @Prompt Disable full PCI enumeration. gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048 ## Disk I/O - Number of Data Buffer block. # Define the size in block of the pre-allocated buffer. It provide better # performance for large Disk I/O requests. # @Prompt Disk I/O - Number of Data Buffer block. gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039 ## This PCD specifies the PCI-based UFS host controller mmio base address. # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS # host controllers, their mmio base addresses are calculated one by one from this base address. # @Prompt Mmio base address of pci-based UFS host controller. gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061 ## Specify Max ESRT cache entry number supported for FMP instances # # @Prompt Max FMP ESRT entry number to be synced & cached in repository. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b ## Specify Max ESRT cache entry number supported for Non FMP instances # # @Prompt Max Non-FMP ESRT entry number to be cached in repository. gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process # # @Prompt Flag to request system reboot after processing capsule. gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d ## Publish PropertiesTable or not. # # If this PCD is TRUE, DxeCore publishs PropertiesTable. # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable. # If this PCD is FALSE, DxeCore does not publish PropertiesTable. # # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map: # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and # use EfiRuntimeServicesData for runtime driver PE image header and other section. # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO. # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP. # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP. # # NOTE: Platform need gurantee this PCD is set correctly. Platform should set # this PCD to be TURE if and only if all runtime driver has seperated Code/Data # section. If PE code/data sections are merged, the result is unpredictable. # # UEFI 2.6 specification does not recommend to use this BIT0 attribute. # # @Prompt Publish UEFI PropertiesTable. gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification. # @Prompt Default OEM ID for ACPI table creation. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034 ## Default OEM Table ID for ACPI table creation, it is "EDK2 ". # According to ACPI specification, this field is particularly useful when # defining a definition block to distinguish definition block functions. # The OEM assigns each dissimilar table a new OEM Table ID. # This PCD is ignored for definition block. # @Prompt Default OEM Table ID for ACPI table creation. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035 ## Default OEM Revision for ACPI table creation. # According to ACPI specification, for LoadTable() opcode, the OS can also # check the OEM Table ID and Revision ID against a database for a newer # revision Definition Block of the same OEM Table ID and load it instead. # This PCD is ignored for definition block. # @Prompt Default OEM Revision for ACPI table creation. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036 ## Default Creator ID for ACPI table creation. # According to ACPI specification, for tables containing Definition Blocks, # this is the ID for the ASL Compiler. # This PCD is ignored for definition block. # @Prompt Default Creator ID for ACPI table creation. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037 ## Default Creator Revision for ACPI table creation. # According to ACPI specification, for tables containing Definition Blocks, # this is the revision for the ASL Compiler. # This PCD is ignored for definition block. # @Prompt Default Creator Revision for ACPI table creation. gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038 ## Indicates if to set NX for stack.

# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require # IA32 PAE is supported and Execute Disable Bit is available.
# TRUE - to set NX for stack.
# FALSE - Not to set NX for stack.
# @Prompt Set NX for stack. gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f [PcdsPatchableInModule] ## Specify memory size with page number for PEI code when # Loading Module at Fixed Address feature is enabled. # The value will be set by the build tool. # @Prompt LMFA PEI code page number. # @ValidList 0x80000001 | 0 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029 ## Specify memory size with page number for DXE boot time code when # Loading Module at Fixed Address feature is enabled. # The value will be set by the build tool. # @Prompt LMFA DXE boot code page number. # @ValidList 0x80000001 | 0 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a ## Specify memory size with page number for DXE runtime code when # Loading Module at Fixed Address feature is enabled. # The value will be set by the build tool. # @Prompt LMFA DXE runtime code page number. # @ValidList 0x80000001 | 0 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b ## Specify memory size with page number for SMM code when # Loading Module at Fixed Address feature is enabled. # The value will be set by the build tool. # @Prompt LMFA SMM code page number. # @ValidList 0x80000001 | 0 gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c [PcdsDynamic, PcdsDynamicEx] ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. # @Prompt S3 Boot Script Table Private Data pointer. # @ValidList 0x80000001 | 0x0 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000 ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library. # @Prompt S3 Boot Script Table Private Smm Data pointer. # @ValidList 0x80000001 | 0x0 gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001 ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 # Virtual to Physical mapping according to the processor physical address bits. # @Prompt Identify Mapping Page Table pointer. # @ValidList 0x80000001 | 0x0 gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002 [UserExtensions.TianoCore."ExtraFiles"] MdeModulePkgExtra.uni