This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php. THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. **/ #include "BaseLibInternals.h" /** Worker function that returns a bit field from Operand. Returns the bitfield specified by the StartBit and the EndBit from Operand. @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. @param EndBit The ordinal of the most significant bit in the bit field. @return The bit field read. **/ UINTN EFIAPI InternalBaseLibBitFieldReadUint ( IN UINTN Operand, IN UINTN StartBit, IN UINTN EndBit ) { // // ~((UINTN)-2 << EndBit) is a mask in which bit[0] thru bit[EndBit] // are 1's while bit[EndBit + 1] thru the most significant bit are 0's. // return (Operand & ~((UINTN)-2 << EndBit)) >> StartBit; } /** Worker function that reads a bit field from Operand, performs a bitwise OR, and returns the result. Performs a bitwise OR between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new value is returned. If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. @param EndBit The ordinal of the most significant bit in the bit field. @param OrData The value to OR with the read value from the value. @return The new value. **/ UINTN EFIAPI InternalBaseLibBitFieldOrUint ( IN UINTN Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINTN OrData ) { // // Higher bits in OrData those are not used must be zero. // // EndBit - StartBit + 1 might be 32 while the result right shifting 32 on a 32bit integer is undefined, // So the logic is updated to right shift (EndBit - StartBit) bits and compare the last bit directly. // ASSERT ((OrData >> (EndBit - StartBit)) == ((OrData >> (EndBit - StartBit)) & 1)); // // ~((UINTN)-2 << EndBit) is a mask in which bit[0] thru bit[EndBit] // are 1's while bit[EndBit + 1] thru the most significant bit are 0's. // return Operand | ((OrData << StartBit) & ~((UINTN) -2 << EndBit)); } /** Worker function that reads a bit field from Operand, performs a bitwise AND, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new value is returned. If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. @param EndBit The ordinal of the most significant bit in the bit field. @param AndData The value to And with the read value from the value. @return The new value. **/ UINTN EFIAPI InternalBaseLibBitFieldAndUint ( IN UINTN Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINTN AndData ) { // // Higher bits in AndData those are not used must be zero. // // EndBit - StartBit + 1 might be 32 while the result right shifting 32 on a 32bit integer is undefined, // So the logic is updated to right shift (EndBit - StartBit) bits and compare the last bit directly. // ASSERT ((AndData >> (EndBit - StartBit)) == ((AndData >> (EndBit - StartBit)) & 1)); // // ~((UINTN)-2 << EndBit) is a mask in which bit[0] thru bit[EndBit] // are 1's while bit[EndBit + 1] thru the most significant bit are 0's. // return Operand & ~((~AndData << StartBit) & ~((UINTN)-2 << EndBit)); } /** Returns a bit field from an 8-bit value. Returns the bitfield specified by the StartBit and the EndBit from Operand. If 8-bit operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @return The bit field read. **/ UINT8 EFIAPI BitFieldRead8 ( IN UINT8 Operand, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT (EndBit < 8); ASSERT (StartBit <= EndBit); return (UINT8)InternalBaseLibBitFieldReadUint (Operand, StartBit, EndBit); } /** Writes a bit field to an 8-bit value, and returns the result. Writes Value to the bit field specified by the StartBit and the EndBit in Operand. All other bits in Operand are preserved. The new 8-bit value is returned. If 8-bit operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param Value The new value of the bit field. @return The new 8-bit value. **/ UINT8 EFIAPI BitFieldWrite8 ( IN UINT8 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value ) { ASSERT (EndBit < 8); ASSERT (StartBit <= EndBit); return BitFieldAndThenOr8 (Operand, StartBit, EndBit, 0, Value); } /** Reads a bit field from an 8-bit value, performs a bitwise OR, and returns the result. Performs a bitwise OR between the bit field specified by StartBit and EndBit in Operand and the value specified by OrData. All other bits in Operand are preserved. The new 8-bit value is returned. If 8-bit operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param OrData The value to OR with the read value from the value. @return The new 8-bit value. **/ UINT8 EFIAPI BitFieldOr8 ( IN UINT8 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData ) { ASSERT (EndBit < 8); ASSERT (StartBit <= EndBit); return (UINT8)InternalBaseLibBitFieldOrUint (Operand, StartBit, EndBit, OrData); } /** Reads a bit field from an 8-bit value, performs a bitwise AND, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new 8-bit value is returned. If 8-bit operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param AndData The value to AND with the read value from the value. @return The new 8-bit value. **/ UINT8 EFIAPI BitFieldAnd8 ( IN UINT8 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData ) { ASSERT (EndBit < 8); ASSERT (StartBit <= EndBit); return (UINT8)InternalBaseLibBitFieldAndUint (Operand, StartBit, EndBit, AndData); } /** Reads a bit field from an 8-bit value, performs a bitwise AND followed by a bitwise OR, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData, followed by a bitwise OR with value specified by OrData. All other bits in Operand are preserved. The new 8-bit value is returned. If 8-bit operations are not supported, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param AndData The value to AND with the read value from the value. @param OrData The value to OR with the result of the AND operation. @return The new 8-bit value. **/ UINT8 EFIAPI BitFieldAndThenOr8 ( IN UINT8 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData ) { ASSERT (EndBit < 8); ASSERT (StartBit <= EndBit); return BitFieldOr8 ( BitFieldAnd8 (Operand, StartBit, EndBit, AndData), StartBit, EndBit, OrData ); } /** Returns a bit field from a 16-bit value. Returns the bitfield specified by the StartBit and the EndBit from Operand. If 16-bit operations are not supported, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @return The bit field read. **/ UINT16 EFIAPI BitFieldRead16 ( IN UINT16 Operand, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT (EndBit < 16); ASSERT (StartBit <= EndBit); return (UINT16)InternalBaseLibBitFieldReadUint (Operand, StartBit, EndBit); } /** Writes a bit field to a 16-bit value, and returns the result. Writes Value to the bit field specified by the StartBit and the EndBit in Operand. All other bits in Operand are preserved. The new 16-bit value is returned. If 16-bit operations are not supported, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param Value The new value of the bit field. @return The new 16-bit value. **/ UINT16 EFIAPI BitFieldWrite16 ( IN UINT16 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value ) { ASSERT (EndBit < 16); ASSERT (StartBit <= EndBit); return BitFieldAndThenOr16 (Operand, StartBit, EndBit, 0, Value); } /** Reads a bit field from a 16-bit value, performs a bitwise OR, and returns the result. Performs a bitwise OR between the bit field specified by StartBit and EndBit in Operand and the value specified by OrData. All other bits in Operand are preserved. The new 16-bit value is returned. If 16-bit operations are not supported, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param OrData The value to OR with the read value from the value. @return The new 16-bit value. **/ UINT16 EFIAPI BitFieldOr16 ( IN UINT16 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData ) { ASSERT (EndBit < 16); ASSERT (StartBit <= EndBit); return (UINT16)InternalBaseLibBitFieldOrUint (Operand, StartBit, EndBit, OrData); } /** Reads a bit field from a 16-bit value, performs a bitwise AND, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new 16-bit value is returned. If 16-bit operations are not supported, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param AndData The value to AND with the read value from the value. @return The new 16-bit value. **/ UINT16 EFIAPI BitFieldAnd16 ( IN UINT16 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData ) { ASSERT (EndBit < 16); ASSERT (StartBit <= EndBit); return (UINT16)InternalBaseLibBitFieldAndUint (Operand, StartBit, EndBit, AndData); } /** Reads a bit field from a 16-bit value, performs a bitwise AND followed by a bitwise OR, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData, followed by a bitwise OR with value specified by OrData. All other bits in Operand are preserved. The new 16-bit value is returned. If 16-bit operations are not supported, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param AndData The value to AND with the read value from the value. @param OrData The value to OR with the result of the AND operation. @return The new 16-bit value. **/ UINT16 EFIAPI BitFieldAndThenOr16 ( IN UINT16 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData ) { ASSERT (EndBit < 16); ASSERT (StartBit <= EndBit); return BitFieldOr16 ( BitFieldAnd16 (Operand, StartBit, EndBit, AndData), StartBit, EndBit, OrData ); } /** Returns a bit field from a 32-bit value. Returns the bitfield specified by the StartBit and the EndBit from Operand. If 32-bit operations are not supported, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @return The bit field read. **/ UINT32 EFIAPI BitFieldRead32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); return (UINT32)InternalBaseLibBitFieldReadUint (Operand, StartBit, EndBit); } /** Writes a bit field to a 32-bit value, and returns the result. Writes Value to the bit field specified by the StartBit and the EndBit in Operand. All other bits in Operand are preserved. The new 32-bit value is returned. If 32-bit operations are not supported, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param Value The new value of the bit field. @return The new 32-bit value. **/ UINT32 EFIAPI BitFieldWrite32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value ) { ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); return BitFieldAndThenOr32 (Operand, StartBit, EndBit, 0, Value); } /** Reads a bit field from a 32-bit value, performs a bitwise OR, and returns the result. Performs a bitwise OR between the bit field specified by StartBit and EndBit in Operand and the value specified by OrData. All other bits in Operand are preserved. The new 32-bit value is returned. If 32-bit operations are not supported, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param OrData The value to OR with the read value from the value. @return The new 32-bit value. **/ UINT32 EFIAPI BitFieldOr32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData ) { ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); return (UINT32)InternalBaseLibBitFieldOrUint (Operand, StartBit, EndBit, OrData); } /** Reads a bit field from a 32-bit value, performs a bitwise AND, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new 32-bit value is returned. If 32-bit operations are not supported, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param AndData The value to AND with the read value from the value. @return The new 32-bit value. **/ UINT32 EFIAPI BitFieldAnd32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData ) { ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); return (UINT32)InternalBaseLibBitFieldAndUint (Operand, StartBit, EndBit, AndData); } /** Reads a bit field from a 32-bit value, performs a bitwise AND followed by a bitwise OR, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData, followed by a bitwise OR with value specified by OrData. All other bits in Operand are preserved. The new 32-bit value is returned. If 32-bit operations are not supported, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param AndData The value to AND with the read value from the value. @param OrData The value to OR with the result of the AND operation. @return The new 32-bit value. **/ UINT32 EFIAPI BitFieldAndThenOr32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData ) { ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); return BitFieldOr32 ( BitFieldAnd32 (Operand, StartBit, EndBit, AndData), StartBit, EndBit, OrData ); } /** Returns a bit field from a 64-bit value. Returns the bitfield specified by the StartBit and the EndBit from Operand. If 64-bit operations are not supported, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @return The bit field read. **/ UINT64 EFIAPI BitFieldRead64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); return RShiftU64 (Operand & ~LShiftU64 ((UINT64)-2, EndBit), StartBit); } /** Writes a bit field to a 64-bit value, and returns the result. Writes Value to the bit field specified by the StartBit and the EndBit in Operand. All other bits in Operand are preserved. The new 64-bit value is returned. If 64-bit operations are not supported, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If Value is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @param Value The new value of the bit field. @return The new 64-bit value. **/ UINT64 EFIAPI BitFieldWrite64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 Value ) { ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); return BitFieldAndThenOr64 (Operand, StartBit, EndBit, 0, Value); } /** Reads a bit field from a 64-bit value, performs a bitwise OR, and returns the result. Performs a bitwise OR between the bit field specified by StartBit and EndBit in Operand and the value specified by OrData. All other bits in Operand are preserved. The new 64-bit value is returned. If 64-bit operations are not supported, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @param OrData The value to OR with the read value from the value @return The new 64-bit value. **/ UINT64 EFIAPI BitFieldOr64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 OrData ) { UINT64 Value1; UINT64 Value2; ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); // // Higher bits in OrData those are not used must be zero. // // EndBit - StartBit + 1 might be 64 while the result right shifting 64 on RShiftU64() API is invalid, // So the logic is updated to right shift (EndBit - StartBit) bits and compare the last bit directly. // ASSERT (RShiftU64 (OrData, EndBit - StartBit) == (RShiftU64 (OrData, EndBit - StartBit) & 1)); Value1 = LShiftU64 (OrData, StartBit); Value2 = LShiftU64 ((UINT64) - 2, EndBit); return Operand | (Value1 & ~Value2); } /** Reads a bit field from a 64-bit value, performs a bitwise AND, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData. All other bits in Operand are preserved. The new 64-bit value is returned. If 64-bit operations are not supported, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @param AndData The value to AND with the read value from the value. @return The new 64-bit value. **/ UINT64 EFIAPI BitFieldAnd64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData ) { UINT64 Value1; UINT64 Value2; ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); // // Higher bits in AndData those are not used must be zero. // // EndBit - StartBit + 1 might be 64 while the right shifting 64 on RShiftU64() API is invalid, // So the logic is updated to right shift (EndBit - StartBit) bits and compare the last bit directly. // ASSERT (RShiftU64 (AndData, EndBit - StartBit) == (RShiftU64 (AndData, EndBit - StartBit) & 1)); Value1 = LShiftU64 (~AndData, StartBit); Value2 = LShiftU64 ((UINT64)-2, EndBit); return Operand & ~(Value1 & ~Value2); } /** Reads a bit field from a 64-bit value, performs a bitwise AND followed by a bitwise OR, and returns the result. Performs a bitwise AND between the bit field specified by StartBit and EndBit in Operand and the value specified by AndData, followed by a bitwise OR with value specified by OrData. All other bits in Operand are preserved. The new 64-bit value is returned. If 64-bit operations are not supported, then ASSERT(). If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). If AndData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). If OrData is larger than the bitmask value range specified by StartBit and EndBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @param AndData The value to AND with the read value from the value. @param OrData The value to OR with the result of the AND operation. @return The new 64-bit value. **/ UINT64 EFIAPI BitFieldAndThenOr64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit, IN UINT64 AndData, IN UINT64 OrData ) { ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); return BitFieldOr64 ( BitFieldAnd64 (Operand, StartBit, EndBit, AndData), StartBit, EndBit, OrData ); } /** Reads a bit field from a 32-bit value, counts and returns the number of set bits. Counts the number of set bits in the bit field specified by StartBit and EndBit in Operand. The count is returned. If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @return The number of bits set between StartBit and EndBit. **/ UINT8 EFIAPI BitFieldCountOnes32 ( IN UINT32 Operand, IN UINTN StartBit, IN UINTN EndBit ) { UINT32 Count; ASSERT (EndBit < 32); ASSERT (StartBit <= EndBit); Count = BitFieldRead32 (Operand, StartBit, EndBit); Count -= ((Count >> 1) & 0x55555555); Count = (Count & 0x33333333) + ((Count >> 2) & 0x33333333); Count += Count >> 4; Count &= 0x0F0F0F0F; Count += Count >> 8; Count += Count >> 16; return (UINT8) Count & 0x3F; } /** Reads a bit field from a 64-bit value, counts and returns the number of set bits. Counts the number of set bits in the bit field specified by StartBit and EndBit in Operand. The count is returned. If StartBit is greater than 63, then ASSERT(). If EndBit is greater than 63, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Operand Operand on which to perform the bitfield operation. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..63. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..63. @return The number of bits set between StartBit and EndBit. **/ UINT8 EFIAPI BitFieldCountOnes64 ( IN UINT64 Operand, IN UINTN StartBit, IN UINTN EndBit ) { UINT64 BitField; UINT8 Count; ASSERT (EndBit < 64); ASSERT (StartBit <= EndBit); BitField = BitFieldRead64 (Operand, StartBit, EndBit); Count = BitFieldCountOnes32 ((UINT32) BitField, 0, 31); Count += BitFieldCountOnes32 ((UINT32) RShiftU64(BitField, 32), 0, 31); return Count; }