/** @file PCI Library. Copyright (c) 2006, Intel Corporation
All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Module Name: PciLib.c **/ // // Declare I/O Ports used to perform PCI Confguration Cycles // #define PCI_CONFIGURATION_ADDRESS_PORT 0xCF8 #define PCI_CONFIGURATION_DATA_PORT 0xCFC // // Declare macro to convert PCI Library formatted address to CF8 formatted address // // PCI Library formatted address CF8 Formatted Address // ============================= ====================== // Bits 00..11 Register Bits 00..07 Register // Bits 12..14 Function Bits 08..10 Function // Bits 15..19 Device Bits 11..15 Device // Bits 20..27 Bus Bits 16..23 Bus // Bits 28..31 Reserved(MBZ) Bits 24..30 Reserved(MBZ) // Bits 31..31 Must be 1 // /** Assert the validity of a PCI address. A valid PCI address should contain 1's only in the low 28 bits. @param A The address to validate. @param M Additional bits to assert to be zero. **/ #define ASSERT_INVALID_PCI_ADDRESS(A,M) \ ASSERT (((A) & (~0xffff0ff | (M))) == 0) /** Convert a PCI Express address to PCI CF8 address. @param A The address to convert. @retval The coverted address. **/ #define PCI_TO_CF8_ADDRESS(A) \ ((UINT32) ((((A) >> 4) & 0x00ffff00) | ((A) & 0xfc) | 0x80000000)) /** Reads an 8-bit PCI configuration register. Reads and returns the 8-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @return The read value from the PCI configuration register. **/ UINT8 EFIAPI PciCf8Read8 ( IN UINTN Address ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoRead8 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3)); } /** Writes an 8-bit PCI configuration register. Writes the 8-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param Value The value to write. @return The value written to the PCI configuration register. **/ UINT8 EFIAPI PciCf8Write8 ( IN UINTN Address, IN UINT8 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoWrite8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), Value ); } /** Performs a bitwise inclusive OR of an 8-bit PCI configuration register with an 8-bit value. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8Or8 ( IN UINTN Address, IN UINT8 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoOr8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), OrData ); } /** Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8And8 ( IN UINTN Address, IN UINT8 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAnd8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), AndData ); } /** Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit value, followed a bitwise inclusive OR with another 8-bit value. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise inclusive OR between the result of the AND operation and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8AndThenOr8 ( IN UINTN Address, IN UINT8 AndData, IN UINT8 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAndThenOr8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), AndData, OrData ); } /** Reads a bit field of a PCI configuration register. Reads the bit field in an 8-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to read. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @return The value of the bit field read from the PCI configuration register. **/ UINT8 EFIAPI PciCf8BitFieldRead8 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldRead8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), StartBit, EndBit ); } /** Writes a bit field to a PCI configuration register. Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 8-bit register is returned. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param Value New value of the bit field. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8BitFieldWrite8 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldWrite8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), StartBit, EndBit, Value ); } /** Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 8-bit port. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8BitFieldOr8 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldOr8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), StartBit, EndBit, OrData ); } /** Reads a bit field in an 8-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 8-bit register. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8BitFieldAnd8 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAnd8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), StartBit, EndBit, AndData ); } /** Reads a bit field in an 8-bit port, performs a bitwise AND followed by a bitwise inclusive OR, and writes the result back to the bit field in the 8-bit port. Reads the 8-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise inclusive OR between the read result and the value specified by AndData, and writes the result to the 8-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 7, then ASSERT(). If EndBit is greater than 7, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..7. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..7. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT8 EFIAPI PciCf8BitFieldAndThenOr8( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT8 AndData, IN UINT8 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 0); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAndThenOr8 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 3), StartBit, EndBit, AndData, OrData ); } /** Reads a 16-bit PCI configuration register. Reads and returns the 16-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @return The read value from the PCI configuration register. **/ UINT16 EFIAPI PciCf8Read16 ( IN UINTN Address ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoRead16 (PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2)); } /** Writes a 16-bit PCI configuration register. Writes the 16-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param Value The value to write. @return The value written to the PCI configuration register. **/ UINT16 EFIAPI PciCf8Write16 ( IN UINTN Address, IN UINT16 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoWrite16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), Value ); } /** Performs a bitwise inclusive OR of a 16-bit PCI configuration register with a 16-bit value. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8Or16 ( IN UINTN Address, IN UINT16 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoOr16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), OrData ); } /** Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8And16 ( IN UINTN Address, IN UINT16 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAnd16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), AndData ); } /** Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit value, followed a bitwise inclusive OR with another 16-bit value. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise inclusive OR between the result of the AND operation and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8AndThenOr16 ( IN UINTN Address, IN UINT16 AndData, IN UINT16 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAndThenOr16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), AndData, OrData ); } /** Reads a bit field of a PCI configuration register. Reads the bit field in a 16-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to read. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @return The value of the bit field read from the PCI configuration register. **/ UINT16 EFIAPI PciCf8BitFieldRead16 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldRead16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), StartBit, EndBit ); } /** Writes a bit field to a PCI configuration register. Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 16-bit register is returned. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param Value New value of the bit field. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8BitFieldWrite16 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldWrite16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), StartBit, EndBit, Value ); } /** Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 16-bit port. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8BitFieldOr16 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldOr16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), StartBit, EndBit, OrData ); } /** Reads a bit field in a 16-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 16-bit register. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8BitFieldAnd16 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAnd16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), StartBit, EndBit, AndData ); } /** Reads a bit field in a 16-bit port, performs a bitwise AND followed by a bitwise inclusive OR, and writes the result back to the bit field in the 16-bit port. Reads the 16-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise inclusive OR between the read result and the value specified by AndData, and writes the result to the 16-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 16-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 15, then ASSERT(). If EndBit is greater than 15, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..15. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..15. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT16 EFIAPI PciCf8BitFieldAndThenOr16( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT16 AndData, IN UINT16 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 1); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAndThenOr16 ( PCI_CONFIGURATION_DATA_PORT + (UINT16)(Address & 2), StartBit, EndBit, AndData, OrData ); } /** Reads a 32-bit PCI configuration register. Reads and returns the 32-bit PCI configuration register specified by Address. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @return The read value from the PCI configuration register. **/ UINT32 EFIAPI PciCf8Read32 ( IN UINTN Address ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoRead32 (PCI_CONFIGURATION_DATA_PORT); } /** Writes a 32-bit PCI configuration register. Writes the 32-bit PCI configuration register specified by Address with the value specified by Value. Value is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param Value The value to write. @return The value written to the PCI configuration register. **/ UINT32 EFIAPI PciCf8Write32 ( IN UINTN Address, IN UINT32 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoWrite32 ( PCI_CONFIGURATION_DATA_PORT, Value ); } /** Performs a bitwise inclusive OR of a 32-bit PCI configuration register with a 32-bit value. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8Or32 ( IN UINTN Address, IN UINT32 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoOr32 ( PCI_CONFIGURATION_DATA_PORT, OrData ); } /** Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8And32 ( IN UINTN Address, IN UINT32 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAnd32 ( PCI_CONFIGURATION_DATA_PORT, AndData ); } /** Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit value, followed a bitwise inclusive OR with another 32-bit value. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, performs a bitwise inclusive OR between the result of the AND operation and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). @param Address Address that encodes the PCI Bus, Device, Function and Register. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8AndThenOr32 ( IN UINTN Address, IN UINT32 AndData, IN UINT32 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoAndThenOr32 ( PCI_CONFIGURATION_DATA_PORT, AndData, OrData ); } /** Reads a bit field of a PCI configuration register. Reads the bit field in a 32-bit PCI configuration register. The bit field is specified by the StartBit and the EndBit. The value of the bit field is returned. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to read. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @return The value of the bit field read from the PCI configuration register. **/ UINT32 EFIAPI PciCf8BitFieldRead32 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldRead32 ( PCI_CONFIGURATION_DATA_PORT, StartBit, EndBit ); } /** Writes a bit field to a PCI configuration register. Writes Value to the bit field of the PCI configuration register. The bit field is specified by the StartBit and the EndBit. All other bits in the destination PCI configuration register are preserved. The new value of the 32-bit register is returned. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param Value New value of the bit field. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8BitFieldWrite32 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 Value ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldWrite32 ( PCI_CONFIGURATION_DATA_PORT, StartBit, EndBit, Value ); } /** Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and writes the result back to the bit field in the 32-bit port. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise inclusive OR between the read result and the value specified by OrData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param OrData The value to OR with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8BitFieldOr32 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldOr32 ( PCI_CONFIGURATION_DATA_PORT, StartBit, EndBit, OrData ); } /** Reads a bit field in a 32-bit PCI configuration register, performs a bitwise AND, and writes the result back to the bit field in the 32-bit register. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in AndData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param AndData The value to AND with the PCI configuration register. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8BitFieldAnd32 ( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAnd32 ( PCI_CONFIGURATION_DATA_PORT, StartBit, EndBit, AndData ); } /** Reads a bit field in a 32-bit port, performs a bitwise AND followed by a bitwise inclusive OR, and writes the result back to the bit field in the 32-bit port. Reads the 32-bit PCI configuration register specified by Address, performs a bitwise AND followed by a bitwise inclusive OR between the read result and the value specified by AndData, and writes the result to the 32-bit PCI configuration register specified by Address. The value written to the PCI configuration register is returned. This function must guarantee that all PCI read and write operations are serialized. Extra left bits in both AndData and OrData are stripped. If Address > 0x0FFFFFFF, then ASSERT(). If Address is not aligned on a 32-bit boundary, then ASSERT(). If the register specified by Address >= 0x100, then ASSERT(). If StartBit is greater than 31, then ASSERT(). If EndBit is greater than 31, then ASSERT(). If EndBit is less than StartBit, then ASSERT(). @param Address PCI configuration register to write. @param StartBit The ordinal of the least significant bit in the bit field. Range 0..31. @param EndBit The ordinal of the most significant bit in the bit field. Range 0..31. @param AndData The value to AND with the PCI configuration register. @param OrData The value to OR with the result of the AND operation. @return The value written back to the PCI configuration register. **/ UINT32 EFIAPI PciCf8BitFieldAndThenOr32( IN UINTN Address, IN UINTN StartBit, IN UINTN EndBit, IN UINT32 AndData, IN UINT32 OrData ) { ASSERT_INVALID_PCI_ADDRESS (Address, 3); IoWrite32 (PCI_CONFIGURATION_ADDRESS_PORT, PCI_TO_CF8_ADDRESS (Address)); return IoBitFieldAndThenOr32 ( PCI_CONFIGURATION_DATA_PORT, StartBit, EndBit, AndData, OrData ); } /** Reads a range of PCI configuration registers into a caller supplied buffer. Reads the range of PCI configuration registers specified by StartAddress and Size into the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be read. Size is returned. When possible 32-bit PCI configuration read cycles are used to read from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration read cycles may be used at the beginning and the end of the range. If StartAddress > 0x0FFFFFFF, then ASSERT(). If the register specified by StartAddress >= 0x100, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT(). @param StartAddress Starting address that encodes the PCI Bus, Device, Function and Register. @param Size Size in bytes of the transfer. @param Buffer Pointer to a buffer receiving the data read. @return Size **/ UINTN EFIAPI PciCf8ReadBuffer ( IN UINTN StartAddress, IN UINTN Size, OUT VOID *Buffer ) { UINTN ReturnValue; ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0); ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100); if (Size == 0) { return Size; } ASSERT (Buffer != NULL); // // Save Size for return // ReturnValue = Size; if ((StartAddress & 1) != 0) { // // Read a byte if StartAddress is byte aligned // *(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress); StartAddress += sizeof (UINT8); Size -= sizeof (UINT8); Buffer = (UINT8*)Buffer + 1; } if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) { // // Read a word if StartAddress is word aligned // *(volatile UINT16 *)Buffer = PciCf8Read16 (StartAddress); StartAddress += sizeof (UINT16); Size -= sizeof (UINT16); Buffer = (UINT16*)Buffer + 1; } while (Size >= sizeof (UINT32)) { // // Read as many double words as possible // *(volatile UINT32 *)Buffer = PciCf8Read32 (StartAddress); StartAddress += sizeof (UINT32); Size -= sizeof (UINT32); Buffer = (UINT32*)Buffer + 1; } if (Size >= sizeof (UINT16)) { // // Read the last remaining word if exist // *(volatile UINT16 *)Buffer = PciCf8Read16 (StartAddress); StartAddress += sizeof (UINT16); Size -= sizeof (UINT16); Buffer = (UINT16*)Buffer + 1; } if (Size >= sizeof (UINT8)) { // // Read the last remaining byte if exist // *(volatile UINT8 *)Buffer = PciCf8Read8 (StartAddress); } return ReturnValue; } /** Copies the data in a caller supplied buffer to a specified range of PCI configuration space. Writes the range of PCI configuration registers specified by StartAddress and Size from the buffer specified by Buffer. This function only allows the PCI configuration registers from a single PCI function to be written. Size is returned. When possible 32-bit PCI configuration write cycles are used to write from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit and 16-bit PCI configuration write cycles may be used at the beginning and the end of the range. If StartAddress > 0x0FFFFFFF, then ASSERT(). If the register specified by StartAddress >= 0x100, then ASSERT(). If ((StartAddress & 0xFFF) + Size) > 0x100, then ASSERT(). If Size > 0 and Buffer is NULL, then ASSERT(). @param StartAddress Starting address that encodes the PCI Bus, Device, Function and Register. @param Size Size in bytes of the transfer. @param Buffer Pointer to a buffer containing the data to write. @return Size **/ UINTN EFIAPI PciCf8WriteBuffer ( IN UINTN StartAddress, IN UINTN Size, IN VOID *Buffer ) { UINTN ReturnValue; ASSERT_INVALID_PCI_ADDRESS (StartAddress, 0); ASSERT (((StartAddress & 0xFFF) + Size) <= 0x100); if (Size == 0) { return 0; } ASSERT (Buffer != NULL); // // Save Size for return // ReturnValue = Size; if ((StartAddress & 1) != 0) { // // Write a byte if StartAddress is byte aligned // PciCf8Write8 (StartAddress, *(UINT8*)Buffer); StartAddress += sizeof (UINT8); Size -= sizeof (UINT8); Buffer = (UINT8*)Buffer + 1; } if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) { // // Write a word if StartAddress is word aligned // PciCf8Write16 (StartAddress, *(UINT16*)Buffer); StartAddress += sizeof (UINT16); Size -= sizeof (UINT16); Buffer = (UINT16*)Buffer + 1; } while (Size >= sizeof (UINT32)) { // // Write as many double words as possible // PciCf8Write32 (StartAddress, *(UINT32*)Buffer); StartAddress += sizeof (UINT32); Size -= sizeof (UINT32); Buffer = (UINT32*)Buffer + 1; } if (Size >= sizeof (UINT16)) { // // Write the last remaining word if exist // PciCf8Write16 (StartAddress, *(UINT16*)Buffer); StartAddress += sizeof (UINT16); Size -= sizeof (UINT16); Buffer = (UINT16*)Buffer + 1; } if (Size >= sizeof (UINT8)) { // // Write the last remaining byte if exist // PciCf8Write8 (StartAddress, *(UINT8*)Buffer); } return ReturnValue; }