/** @file Tiano PE/COFF loader. Copyright (c) 2006, Intel Corporation All rights reserved. This program and the accompanying materials are licensed and made available under the terms and conditions of the BSD License which accompanies this distribution. The full text of the license may be found at http://opensource.org/licenses/bsd-license.php THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. Module Name: PeCoffLoader.c **/ /** Performs an Itanium-based specific relocation fixup. @param Reloc Pointer to the relocation record. @param Fixup Pointer to the address to fix up. @param FixupData Pointer to a buffer to log the fixups. @param Adjust The offset to adjust the fixup. @return Status code. **/ RETURN_STATUS PeCoffLoaderRelocateImageEx ( IN UINT16 *Reloc, IN OUT CHAR8 *Fixup, IN OUT CHAR8 **FixupData, IN UINT64 Adjust ); /** Retrieves the PE or TE Header from a PE/COFF or TE image. @param ImageContext The context of the image being loaded. @param PeHdr The buffer in which to return the PE header. @param TeHdr The buffer in which to return the TE header. @retval RETURN_SUCCESS The PE or TE Header is read. @retval Other The error status from reading the PE/COFF or TE image using the ImageRead function. **/ STATIC RETURN_STATUS PeCoffLoaderGetPeHeader ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext, OUT EFI_IMAGE_NT_HEADERS *PeHdr, OUT EFI_TE_IMAGE_HEADER *TeHdr ) { RETURN_STATUS Status; EFI_IMAGE_DOS_HEADER DosHdr; UINTN Size; ImageContext->IsTeImage = FALSE; // // Read the DOS image headers // Size = sizeof (EFI_IMAGE_DOS_HEADER); Status = ImageContext->ImageRead ( ImageContext->Handle, 0, &Size, &DosHdr ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } ImageContext->PeCoffHeaderOffset = 0; if (DosHdr.e_magic == EFI_IMAGE_DOS_SIGNATURE) { // // DOS image header is present, so read the PE header after the DOS image header // ImageContext->PeCoffHeaderOffset = DosHdr.e_lfanew; } // // Read the PE/COFF Header // Size = sizeof (EFI_IMAGE_NT_HEADERS); Status = ImageContext->ImageRead ( ImageContext->Handle, ImageContext->PeCoffHeaderOffset, &Size, PeHdr ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } // // Check the PE/COFF Header Signature. If not, then try to read a TE header // if (PeHdr->Signature != EFI_IMAGE_NT_SIGNATURE) { Size = sizeof (EFI_TE_IMAGE_HEADER); Status = ImageContext->ImageRead ( ImageContext->Handle, 0, &Size, TeHdr ); if (TeHdr->Signature != EFI_TE_IMAGE_HEADER_SIGNATURE) { return RETURN_UNSUPPORTED; } ImageContext->IsTeImage = TRUE; } return RETURN_SUCCESS; } /** Checks the PE or TE header of a PE/COFF or TE image to determine if it supported. @param ImageContext The context of the image being loaded. @param PeHdr The buffer in which to return the PE header. @param TeHdr The buffer in which to return the TE header. @retval RETURN_SUCCESS The PE/COFF or TE image is supported. @retval RETURN_UNSUPPORTED The PE/COFF or TE image is not supported. **/ STATIC RETURN_STATUS PeCoffLoaderCheckImageType ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext, IN EFI_IMAGE_NT_HEADERS *PeHdr, IN EFI_TE_IMAGE_HEADER *TeHdr ) { // // See if the machine type is supported. We support a native machine type (IA-32/Itanium-based) // and the machine type for the Virtual Machine. // if (ImageContext->IsTeImage == FALSE) { ImageContext->Machine = PeHdr->FileHeader.Machine; } else { ImageContext->Machine = TeHdr->Machine; } if (!(EFI_IMAGE_MACHINE_TYPE_SUPPORTED (ImageContext->Machine))) { ImageContext->ImageError = IMAGE_ERROR_INVALID_MACHINE_TYPE; return RETURN_UNSUPPORTED; } // // See if the image type is supported. We support EFI Applications, // EFI Boot Service Drivers, and EFI Runtime Drivers. // if (ImageContext->IsTeImage == FALSE) { ImageContext->ImageType = PeHdr->OptionalHeader.Subsystem; } else { ImageContext->ImageType = (UINT16) (TeHdr->Subsystem); } return RETURN_SUCCESS; } /** Retrieves information about a PE/COFF image. Computes the PeCoffHeaderOffset, ImageAddress, ImageSize, DestinationAddress, CodeView, PdbPointer, RelocationsStripped, SectionAlignment, SizeOfHeaders, and DebugDirectoryEntryRva fields of the ImageContext structure. If ImageContext is NULL, then return RETURN_INVALID_PARAMETER. If the PE/COFF image accessed through the ImageRead service in the ImageContext structure is not a supported PE/COFF image type, then return RETURN_UNSUPPORTED. If any errors occur while computing the fields of ImageContext, then the error status is returned in the ImageError field of ImageContext. @param ImageContext Pointer to the image context structure that describes the PE/COFF image that needs to be examined by this function. @retval RETURN_SUCCESS The information on the PE/COFF image was collected. @retval RETURN_INVALID_PARAMETER ImageContext is NULL. @retval RETURN_UNSUPPORTED The PE/COFF image is not supported. **/ RETURN_STATUS EFIAPI PeCoffLoaderGetImageInfo ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext ) { RETURN_STATUS Status; EFI_IMAGE_NT_HEADERS PeHdr; EFI_TE_IMAGE_HEADER TeHdr; EFI_IMAGE_DATA_DIRECTORY *DebugDirectoryEntry; UINTN Size; UINTN Index; UINTN DebugDirectoryEntryRva; UINTN DebugDirectoryEntryFileOffset; UINTN SectionHeaderOffset; EFI_IMAGE_SECTION_HEADER SectionHeader; EFI_IMAGE_DEBUG_DIRECTORY_ENTRY DebugEntry; if (NULL == ImageContext) { return RETURN_INVALID_PARAMETER; } // // Assume success // ImageContext->ImageError = IMAGE_ERROR_SUCCESS; Status = PeCoffLoaderGetPeHeader (ImageContext, &PeHdr, &TeHdr); if (RETURN_ERROR (Status)) { return Status; } // // Verify machine type // Status = PeCoffLoaderCheckImageType (ImageContext, &PeHdr, &TeHdr); if (RETURN_ERROR (Status)) { return Status; } // // Retrieve the base address of the image // if (!(ImageContext->IsTeImage)) { ImageContext->ImageAddress = PeHdr.OptionalHeader.ImageBase; } else { ImageContext->ImageAddress = (PHYSICAL_ADDRESS) (TeHdr.ImageBase); } // // Initialize the alternate destination address to 0 indicating that it // should not be used. // ImageContext->DestinationAddress = 0; // // Initialize the codeview pointer. // ImageContext->CodeView = NULL; ImageContext->PdbPointer = NULL; // // Three cases with regards to relocations: // - Image has base relocs, RELOCS_STRIPPED==0 => image is relocatable // - Image has no base relocs, RELOCS_STRIPPED==1 => Image is not relocatable // - Image has no base relocs, RELOCS_STRIPPED==0 => Image is relocatable but // has no base relocs to apply // Obviously having base relocations with RELOCS_STRIPPED==1 is invalid. // // Look at the file header to determine if relocations have been stripped, and // save this info in the image context for later use. // if ((!(ImageContext->IsTeImage)) && ((PeHdr.FileHeader.Characteristics & EFI_IMAGE_FILE_RELOCS_STRIPPED) != 0)) { ImageContext->RelocationsStripped = TRUE; } else { ImageContext->RelocationsStripped = FALSE; } if (!(ImageContext->IsTeImage)) { ImageContext->ImageSize = (UINT64) PeHdr.OptionalHeader.SizeOfImage; ImageContext->SectionAlignment = PeHdr.OptionalHeader.SectionAlignment; ImageContext->SizeOfHeaders = PeHdr.OptionalHeader.SizeOfHeaders; // // Modify ImageSize to contain .PDB file name if required and initialize // PdbRVA field... // if (PeHdr.OptionalHeader.NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_DEBUG) { DebugDirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *) &(PeHdr.OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_DEBUG]); DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress; // // Determine the file offset of the debug directory... This means we walk // the sections to find which section contains the RVA of the debug // directory // DebugDirectoryEntryFileOffset = 0; SectionHeaderOffset = (UINTN)( ImageContext->PeCoffHeaderOffset + sizeof (UINT32) + sizeof (EFI_IMAGE_FILE_HEADER) + PeHdr.FileHeader.SizeOfOptionalHeader ); for (Index = 0; Index < PeHdr.FileHeader.NumberOfSections; Index++) { // // Read section header from file // Size = sizeof (EFI_IMAGE_SECTION_HEADER); Status = ImageContext->ImageRead ( ImageContext->Handle, SectionHeaderOffset, &Size, &SectionHeader ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress && DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) { DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva - SectionHeader.VirtualAddress + SectionHeader.PointerToRawData; break; } SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER); } if (DebugDirectoryEntryFileOffset != 0) { for (Index = 0; Index < DebugDirectoryEntry->Size; Index++) { // // Read next debug directory entry // Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY); Status = ImageContext->ImageRead ( ImageContext->Handle, DebugDirectoryEntryFileOffset, &Size, &DebugEntry ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) { ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index * sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)); if (DebugEntry.RVA == 0 && DebugEntry.FileOffset != 0) { ImageContext->ImageSize += DebugEntry.SizeOfData; } return RETURN_SUCCESS; } } } } } else { ImageContext->ImageSize = 0; ImageContext->SectionAlignment = 4096; ImageContext->SizeOfHeaders = sizeof (EFI_TE_IMAGE_HEADER) + (UINTN) TeHdr.BaseOfCode - (UINTN) TeHdr.StrippedSize; DebugDirectoryEntry = &TeHdr.DataDirectory[1]; DebugDirectoryEntryRva = DebugDirectoryEntry->VirtualAddress; SectionHeaderOffset = (UINTN) (sizeof (EFI_TE_IMAGE_HEADER)); DebugDirectoryEntryFileOffset = 0; for (Index = 0; Index < TeHdr.NumberOfSections;) { // // Read section header from file // Size = sizeof (EFI_IMAGE_SECTION_HEADER); Status = ImageContext->ImageRead ( ImageContext->Handle, SectionHeaderOffset, &Size, &SectionHeader ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } if (DebugDirectoryEntryRva >= SectionHeader.VirtualAddress && DebugDirectoryEntryRva < SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize) { DebugDirectoryEntryFileOffset = DebugDirectoryEntryRva - SectionHeader.VirtualAddress + SectionHeader.PointerToRawData + sizeof (EFI_TE_IMAGE_HEADER) - TeHdr.StrippedSize; // // File offset of the debug directory was found, if this is not the last // section, then skip to the last section for calculating the image size. // if (Index < (UINTN) TeHdr.NumberOfSections - 1) { SectionHeaderOffset += (TeHdr.NumberOfSections - 1 - Index) * sizeof (EFI_IMAGE_SECTION_HEADER); Index = TeHdr.NumberOfSections - 1; continue; } } // // In Te image header there is not a field to describe the ImageSize. // Actually, the ImageSize equals the RVA plus the VirtualSize of // the last section mapped into memory (Must be rounded up to // a mulitple of Section Alignment). Per the PE/COFF specification, the // section headers in the Section Table must appear in order of the RVA // values for the corresponding sections. So the ImageSize can be determined // by the RVA and the VirtualSize of the last section header in the // Section Table. // if ((++Index) == (UINTN) TeHdr.NumberOfSections) { ImageContext->ImageSize = (SectionHeader.VirtualAddress + SectionHeader.Misc.VirtualSize + ImageContext->SectionAlignment - 1) & ~(ImageContext->SectionAlignment - 1); } SectionHeaderOffset += sizeof (EFI_IMAGE_SECTION_HEADER); } if (DebugDirectoryEntryFileOffset != 0) { for (Index = 0; Index < DebugDirectoryEntry->Size; Index++) { // // Read next debug directory entry // Size = sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY); Status = ImageContext->ImageRead ( ImageContext->Handle, DebugDirectoryEntryFileOffset, &Size, &DebugEntry ); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } if (DebugEntry.Type == EFI_IMAGE_DEBUG_TYPE_CODEVIEW) { ImageContext->DebugDirectoryEntryRva = (UINT32) (DebugDirectoryEntryRva + Index * sizeof (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY)); return RETURN_SUCCESS; } } } } return RETURN_SUCCESS; } /** Converts an image address to the loaded address. @param ImageContext The context of the image being loaded. @param Address The address to be converted to the loaded address. @return The converted address or NULL if the address can not be converted. **/ STATIC VOID * PeCoffLoaderImageAddress ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext, IN UINTN Address ) { if (Address >= ImageContext->ImageSize) { ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; return NULL; } return (CHAR8 *) ((UINTN) ImageContext->ImageAddress + Address); } /** Applies relocation fixups to a PE/COFF image that was loaded with PeCoffLoaderLoadImage(). If the DestinationAddress field of ImageContext is 0, then use the ImageAddress field of ImageContext as the relocation base address. Otherwise, use the DestinationAddress field of ImageContext as the relocation base address. The caller must allocate the relocation fixup log buffer and fill in the FixupData field of ImageContext prior to calling this function. If ImageContext is NULL, then ASSERT(). @param ImageContext Pointer to the image context structure that describes the PE/COFF image that is being relocated. @retval RETURN_SUCCESS The PE/COFF image was relocated. Extended status information is in the ImageError field of ImageContext. @retval RETURN_LOAD_ERROR The image in not a valid PE/COFF image. Extended status information is in the ImageError field of ImageContext. @retval RETURN_UNSUPPORTED A relocation record type is not supported. Extended status information is in the ImageError field of ImageContext. **/ RETURN_STATUS EFIAPI PeCoffLoaderRelocateImage ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext ) { RETURN_STATUS Status; EFI_IMAGE_NT_HEADERS *PeHdr; EFI_TE_IMAGE_HEADER *TeHdr; EFI_IMAGE_DATA_DIRECTORY *RelocDir; UINT64 Adjust; EFI_IMAGE_BASE_RELOCATION *RelocBase; EFI_IMAGE_BASE_RELOCATION *RelocBaseEnd; UINT16 *Reloc; UINT16 *RelocEnd; CHAR8 *Fixup; CHAR8 *FixupBase; UINT16 *F16; UINT32 *F32; CHAR8 *FixupData; PHYSICAL_ADDRESS BaseAddress; ASSERT (ImageContext != NULL); PeHdr = NULL; TeHdr = NULL; // // Assume success // ImageContext->ImageError = IMAGE_ERROR_SUCCESS; // // If there are no relocation entries, then we are done // if (ImageContext->RelocationsStripped) { return RETURN_SUCCESS; } // // If the destination address is not 0, use that rather than the // image address as the relocation target. // if (ImageContext->DestinationAddress != 0) { BaseAddress = ImageContext->DestinationAddress; } else { BaseAddress = ImageContext->ImageAddress; } if (!(ImageContext->IsTeImage)) { PeHdr = (EFI_IMAGE_NT_HEADERS *)((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset); Adjust = (UINT64) BaseAddress - PeHdr->OptionalHeader.ImageBase; PeHdr->OptionalHeader.ImageBase = (UINTN)BaseAddress; // // Find the relocation block // // Per the PE/COFF spec, you can't assume that a given data directory // is present in the image. You have to check the NumberOfRvaAndSizes in // the optional header to verify a desired directory entry is there. // if (PeHdr->OptionalHeader.NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) { RelocDir = &PeHdr->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; RelocBase = PeCoffLoaderImageAddress (ImageContext, RelocDir->VirtualAddress); RelocBaseEnd = PeCoffLoaderImageAddress ( ImageContext, RelocDir->VirtualAddress + RelocDir->Size - 1 ); } else { // // Set base and end to bypass processing below. // RelocBase = RelocBaseEnd = 0; } } else { TeHdr = (EFI_TE_IMAGE_HEADER *) (UINTN) (ImageContext->ImageAddress); Adjust = (UINT64) (BaseAddress - TeHdr->ImageBase); TeHdr->ImageBase = (UINT64) (BaseAddress); // // Find the relocation block // RelocDir = &TeHdr->DataDirectory[0]; RelocBase = (EFI_IMAGE_BASE_RELOCATION *)(UINTN)( ImageContext->ImageAddress + RelocDir->VirtualAddress + sizeof(EFI_TE_IMAGE_HEADER) - TeHdr->StrippedSize ); RelocBaseEnd = (EFI_IMAGE_BASE_RELOCATION *) ((UINTN) RelocBase + (UINTN) RelocDir->Size - 1); } // // Run the relocation information and apply the fixups // FixupData = ImageContext->FixupData; while (RelocBase < RelocBaseEnd) { Reloc = (UINT16 *) ((CHAR8 *) RelocBase + sizeof (EFI_IMAGE_BASE_RELOCATION)); RelocEnd = (UINT16 *) ((CHAR8 *) RelocBase + RelocBase->SizeOfBlock); if (!(ImageContext->IsTeImage)) { FixupBase = PeCoffLoaderImageAddress (ImageContext, RelocBase->VirtualAddress); } else { FixupBase = (CHAR8 *)(UINTN)(ImageContext->ImageAddress + RelocBase->VirtualAddress + sizeof(EFI_TE_IMAGE_HEADER) - TeHdr->StrippedSize ); } if ((CHAR8 *) RelocEnd < (CHAR8 *) ((UINTN) ImageContext->ImageAddress) || (CHAR8 *) RelocEnd > (CHAR8 *)((UINTN)ImageContext->ImageAddress + (UINTN)ImageContext->ImageSize)) { ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION; return RETURN_LOAD_ERROR; } // // Run this relocation record // while (Reloc < RelocEnd) { Fixup = FixupBase + (*Reloc & 0xFFF); switch ((*Reloc) >> 12) { case EFI_IMAGE_REL_BASED_ABSOLUTE: break; case EFI_IMAGE_REL_BASED_HIGH: F16 = (UINT16 *) Fixup; *F16 = (UINT16) ((*F16 << 16) + (UINT16) Adjust); if (FixupData != NULL) { *(UINT16 *) FixupData = *F16; FixupData = FixupData + sizeof (UINT16); } break; case EFI_IMAGE_REL_BASED_LOW: F16 = (UINT16 *) Fixup; *F16 = (UINT16) (*F16 + (UINT16) Adjust); if (FixupData != NULL) { *(UINT16 *) FixupData = *F16; FixupData = FixupData + sizeof (UINT16); } break; case EFI_IMAGE_REL_BASED_HIGHLOW: F32 = (UINT32 *) Fixup; *F32 = *F32 + (UINT32) Adjust; if (FixupData != NULL) { FixupData = ALIGN_POINTER (FixupData, sizeof (UINT32)); *(UINT32 *) FixupData = *F32; FixupData = FixupData + sizeof (UINT32); } break; case EFI_IMAGE_REL_BASED_HIGHADJ: // // Return the same EFI_UNSUPPORTED return code as // PeCoffLoaderRelocateImageEx() returns if it does not recognize // the relocation type. // ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION; return RETURN_UNSUPPORTED; default: Status = PeCoffLoaderRelocateImageEx (Reloc, Fixup, &FixupData, Adjust); if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_FAILED_RELOCATION; return Status; } } // // Next relocation record // Reloc += 1; } // // Next reloc block // RelocBase = (EFI_IMAGE_BASE_RELOCATION *) RelocEnd; } return RETURN_SUCCESS; } /** Loads a PE/COFF image into memory. Loads the PE/COFF image accessed through the ImageRead service of ImageContext into the buffer specified by the ImageAddress and ImageSize fields of ImageContext. The caller must allocate the load buffer and fill in the ImageAddress and ImageSize fields prior to calling this function. The EntryPoint, FixupDataSize, CodeView, and PdbPointer fields of ImageContext are computed. If ImageContext is NULL, then ASSERT(). @param ImageContext Pointer to the image context structure that describes the PE/COFF image that is being loaded. @retval RETURN_SUCCESS The PE/COFF image was loaded into the buffer specified by the ImageAddress and ImageSize fields of ImageContext. Extended status information is in the ImageError field of ImageContext. @retval RETURN_BUFFER_TOO_SMALL The caller did not provide a large enough buffer. Extended status information is in the ImageError field of ImageContext. @retval RETURN_LOAD_ERROR The PE/COFF image is an EFI Runtime image with no relocations. Extended status information is in the ImageError field of ImageContext. @retval RETURN_INVALID_PARAMETER The image address is invalid. Extended status information is in the ImageError field of ImageContext. **/ RETURN_STATUS EFIAPI PeCoffLoaderLoadImage ( IN OUT PE_COFF_LOADER_IMAGE_CONTEXT *ImageContext ) { RETURN_STATUS Status; EFI_IMAGE_NT_HEADERS *PeHdr; EFI_TE_IMAGE_HEADER *TeHdr; PE_COFF_LOADER_IMAGE_CONTEXT CheckContext; EFI_IMAGE_SECTION_HEADER *FirstSection; EFI_IMAGE_SECTION_HEADER *Section; UINTN NumberOfSections; UINTN Index; CHAR8 *Base; CHAR8 *End; CHAR8 *MaxEnd; EFI_IMAGE_DATA_DIRECTORY *DirectoryEntry; EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *DebugEntry; UINTN Size; UINT32 TempDebugEntryRva; ASSERT (ImageContext != NULL); PeHdr = NULL; TeHdr = NULL; // // Assume success // ImageContext->ImageError = IMAGE_ERROR_SUCCESS; // // Copy the provided context info into our local version, get what we // can from the original image, and then use that to make sure everything // is legit. // CopyMem (&CheckContext, ImageContext, sizeof (PE_COFF_LOADER_IMAGE_CONTEXT)); Status = PeCoffLoaderGetImageInfo (&CheckContext); if (RETURN_ERROR (Status)) { return Status; } // // Make sure there is enough allocated space for the image being loaded // if (ImageContext->ImageSize < CheckContext.ImageSize) { ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_SIZE; return RETURN_BUFFER_TOO_SMALL; } if (ImageContext->ImageAddress == 0) { // // Image cannot be loaded into 0 address. // ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; return RETURN_INVALID_PARAMETER; } // // If there's no relocations, then make sure it's not a runtime driver, // and that it's being loaded at the linked address. // if (CheckContext.RelocationsStripped) { // // If the image does not contain relocations and it is a runtime driver // then return an error. // if (CheckContext.ImageType == EFI_IMAGE_SUBSYSTEM_EFI_RUNTIME_DRIVER) { ImageContext->ImageError = IMAGE_ERROR_INVALID_SUBSYSTEM; return RETURN_LOAD_ERROR; } // // If the image does not contain relocations, and the requested load address // is not the linked address, then return an error. // if (CheckContext.ImageAddress != ImageContext->ImageAddress) { ImageContext->ImageError = IMAGE_ERROR_INVALID_IMAGE_ADDRESS; return RETURN_INVALID_PARAMETER; } } // // Make sure the allocated space has the proper section alignment // if (!(ImageContext->IsTeImage)) { if ((ImageContext->ImageAddress & (CheckContext.SectionAlignment - 1)) != 0) { ImageContext->ImageError = IMAGE_ERROR_INVALID_SECTION_ALIGNMENT; return RETURN_INVALID_PARAMETER; } } // // Read the entire PE/COFF or TE header into memory // if (!(ImageContext->IsTeImage)) { Status = ImageContext->ImageRead ( ImageContext->Handle, 0, &ImageContext->SizeOfHeaders, (VOID *) (UINTN) ImageContext->ImageAddress ); PeHdr = (EFI_IMAGE_NT_HEADERS *) ((UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset); FirstSection = (EFI_IMAGE_SECTION_HEADER *) ( (UINTN)ImageContext->ImageAddress + ImageContext->PeCoffHeaderOffset + sizeof(UINT32) + sizeof(EFI_IMAGE_FILE_HEADER) + PeHdr->FileHeader.SizeOfOptionalHeader ); NumberOfSections = (UINTN) (PeHdr->FileHeader.NumberOfSections); } else { Status = ImageContext->ImageRead ( ImageContext->Handle, 0, &ImageContext->SizeOfHeaders, (void *) (UINTN) ImageContext->ImageAddress ); TeHdr = (EFI_TE_IMAGE_HEADER *) (UINTN) (ImageContext->ImageAddress); FirstSection = (EFI_IMAGE_SECTION_HEADER *) ( (UINTN)ImageContext->ImageAddress + sizeof(EFI_TE_IMAGE_HEADER) ); NumberOfSections = (UINTN) (TeHdr->NumberOfSections); } if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return RETURN_LOAD_ERROR; } // // Load each section of the image // Section = FirstSection; for (Index = 0, MaxEnd = NULL; Index < NumberOfSections; Index++) { // // Compute sections address // Base = PeCoffLoaderImageAddress (ImageContext, Section->VirtualAddress); End = PeCoffLoaderImageAddress ( ImageContext, Section->VirtualAddress + Section->Misc.VirtualSize - 1 ); if (ImageContext->IsTeImage) { Base = (CHAR8 *) ((UINTN) Base + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN) TeHdr->StrippedSize); End = (CHAR8 *) ((UINTN) End + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN) TeHdr->StrippedSize); } if (End > MaxEnd) { MaxEnd = End; } // // If the base start or end address resolved to 0, then fail. // if ((Base == NULL) || (End == NULL)) { ImageContext->ImageError = IMAGE_ERROR_SECTION_NOT_LOADED; return RETURN_LOAD_ERROR; } // // Read the section // Size = (UINTN) Section->Misc.VirtualSize; if ((Size == 0) || (Size > Section->SizeOfRawData)) { Size = (UINTN) Section->SizeOfRawData; } if (Section->SizeOfRawData) { if (!(ImageContext->IsTeImage)) { Status = ImageContext->ImageRead ( ImageContext->Handle, Section->PointerToRawData, &Size, Base ); } else { Status = ImageContext->ImageRead ( ImageContext->Handle, Section->PointerToRawData + sizeof (EFI_TE_IMAGE_HEADER) - (UINTN) TeHdr->StrippedSize, &Size, Base ); } if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return Status; } } // // If raw size is less then virt size, zero fill the remaining // if (Size < Section->Misc.VirtualSize) { ZeroMem (Base + Size, Section->Misc.VirtualSize - Size); } // // Next Section // Section += 1; } // // Get image's entry point // if (!(ImageContext->IsTeImage)) { ImageContext->EntryPoint = (PHYSICAL_ADDRESS) (UINTN) PeCoffLoaderImageAddress ( ImageContext, PeHdr->OptionalHeader.AddressOfEntryPoint ); } else { ImageContext->EntryPoint = (PHYSICAL_ADDRESS) ( (UINTN)ImageContext->ImageAddress + (UINTN)TeHdr->AddressOfEntryPoint + (UINTN)sizeof(EFI_TE_IMAGE_HEADER) - (UINTN) TeHdr->StrippedSize ); } // // Determine the size of the fixup data // // Per the PE/COFF spec, you can't assume that a given data directory // is present in the image. You have to check the NumberOfRvaAndSizes in // the optional header to verify a desired directory entry is there. // if (!(ImageContext->IsTeImage)) { if (PeHdr->OptionalHeader.NumberOfRvaAndSizes > EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC) { DirectoryEntry = (EFI_IMAGE_DATA_DIRECTORY *) &PeHdr->OptionalHeader.DataDirectory[EFI_IMAGE_DIRECTORY_ENTRY_BASERELOC]; ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN); } else { ImageContext->FixupDataSize = 0; } } else { DirectoryEntry = &TeHdr->DataDirectory[0]; ImageContext->FixupDataSize = DirectoryEntry->Size / sizeof (UINT16) * sizeof (UINTN); } // // Consumer must allocate a buffer for the relocation fixup log. // Only used for runtime drivers. // ImageContext->FixupData = NULL; // // Load the Codeview info if present // if (ImageContext->DebugDirectoryEntryRva != 0) { if (!(ImageContext->IsTeImage)) { DebugEntry = PeCoffLoaderImageAddress ( ImageContext, ImageContext->DebugDirectoryEntryRva ); } else { DebugEntry = (EFI_IMAGE_DEBUG_DIRECTORY_ENTRY *)(UINTN)( ImageContext->ImageAddress + ImageContext->DebugDirectoryEntryRva + sizeof(EFI_TE_IMAGE_HEADER) - TeHdr->StrippedSize ); } if (DebugEntry != NULL) { TempDebugEntryRva = DebugEntry->RVA; if (DebugEntry->RVA == 0 && DebugEntry->FileOffset != 0) { Section--; if ((UINTN) Section->SizeOfRawData < Section->Misc.VirtualSize) { TempDebugEntryRva = Section->VirtualAddress + Section->Misc.VirtualSize; } else { TempDebugEntryRva = Section->VirtualAddress + Section->SizeOfRawData; } } if (TempDebugEntryRva != 0) { if (!(ImageContext->IsTeImage)) { ImageContext->CodeView = PeCoffLoaderImageAddress (ImageContext, TempDebugEntryRva); } else { ImageContext->CodeView = (VOID *)( (UINTN)ImageContext->ImageAddress + (UINTN)TempDebugEntryRva + (UINTN)sizeof(EFI_TE_IMAGE_HEADER) - (UINTN) TeHdr->StrippedSize ); } if (ImageContext->CodeView == NULL) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return RETURN_LOAD_ERROR; } if (DebugEntry->RVA == 0) { Size = DebugEntry->SizeOfData; if (!(ImageContext->IsTeImage)) { Status = ImageContext->ImageRead ( ImageContext->Handle, DebugEntry->FileOffset, &Size, ImageContext->CodeView ); } else { Status = ImageContext->ImageRead ( ImageContext->Handle, DebugEntry->FileOffset + sizeof (EFI_TE_IMAGE_HEADER) - TeHdr->StrippedSize, &Size, ImageContext->CodeView ); // // Should we apply fix up to this field according to the size difference between PE and TE? // Because now we maintain TE header fields unfixed, this field will also remain as they are // in original PE image. // } if (RETURN_ERROR (Status)) { ImageContext->ImageError = IMAGE_ERROR_IMAGE_READ; return RETURN_LOAD_ERROR; } DebugEntry->RVA = TempDebugEntryRva; } switch (*(UINT32 *) ImageContext->CodeView) { case CODEVIEW_SIGNATURE_NB10: ImageContext->PdbPointer = (CHAR8 *) ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_NB10_ENTRY); break; case CODEVIEW_SIGNATURE_RSDS: ImageContext->PdbPointer = (CHAR8 *) ImageContext->CodeView + sizeof (EFI_IMAGE_DEBUG_CODEVIEW_RSDS_ENTRY); break; default: break; } } } } return Status; }