## @file SecurityPkg.dec # Provides security features that conform to TCG/UEFI industry standards # # The security features include secure boot, measured boot and user identification. # It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes) # and libraries instances, which are used for those features. # # Copyright (c) 2009 - 2016, Intel Corporation. All rights reserved.
# (C) Copyright 2015 Hewlett Packard Enterprise Development LP
# This program and the accompanying materials are licensed and made available under # the terms and conditions of the BSD License which accompanies this distribution. # The full text of the license may be found at # http://opensource.org/licenses/bsd-license.php # # THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, # WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. # ## [Defines] DEC_SPECIFICATION = 0x00010005 PACKAGE_NAME = SecurityPkg PACKAGE_UNI_FILE = SecurityPkg.uni PACKAGE_GUID = 4EFC4F66-6219-4427-B780-FB99F470767F PACKAGE_VERSION = 0.96 [Includes] Include [LibraryClasses] ## @libraryclass Provides hash interfaces from different implementations. # HashLib|Include/Library/HashLib.h ## @libraryclass Provides a platform specific interface to detect physically present user. # PlatformSecureLib|Include/Library/PlatformSecureLib.h ## @libraryclass Provides interfaces to handle TPM 1.2 request. # TcgPhysicalPresenceLib|Include/Library/TcgPhysicalPresenceLib.h ## @libraryclass Provides support for TCG PP >= 128 Vendor Specific PPI Operation. # TcgPpVendorLib|Include/Library/TcgPpVendorLib.h ## @libraryclass Provides interfaces for other modules to send TPM 2.0 command. # Tpm2CommandLib|Include/Library/Tpm2CommandLib.h ## @libraryclass Provides interfaces on how to access TPM 2.0 hardware device. # Tpm2DeviceLib|Include/Library/Tpm2DeviceLib.h ## @libraryclass Provides interfaces for other modules to send TPM 1.2 command. # Tpm12CommandLib|Include/Library/Tpm12CommandLib.h ## @libraryclass Provides interfaces on how to access TPM 1.2 hardware device. # Tpm12DeviceLib|Include/Library/Tpm12DeviceLib.h ## @libraryclass Provides TPM Interface Specification (TIS) interfaces for TPM command. # TpmCommLib|Include/Library/TpmCommLib.h ## @libraryclass Provides interfaces to handle TPM 2.0 request. # TrEEPhysicalPresenceLib|Include/Library/TrEEPhysicalPresenceLib.h ## @libraryclass Provides support for TrEE PP >= 128 Vendor Specific PPI Operation. # TrEEPpVendorLib|Include/Library/TrEEPpVendorLib.h ## @libraryclass Provides support for TCG Physical Presence Interface (PPI) specification # >= 128 Vendor Specific PPI Operation. # Tcg2PpVendorLib|Include/Library/TcgPpVendorLib.h ## @libraryclass Handle TPM 2.0 physical presence request from OS. # Tcg2PhysicalPresenceLib|Include/Library/Tcg2PhysicalPresenceLib.h ## @libraryclass Provides interfaces about TCG storage generic commond. # TcgStorageCoreLib|Include/Library/TcgStorageCoreLib.h ## @libraryclass Provides interfaces about TCG storage Opal generic commond. # TcgStorageOpalLib|Include/Library/TcgStorageOpalLib.h ## @libraryclass Provides interfaces about Opal commond special for Opal password solution. # OpalPasswordSupportLib|Include/Library/OpalPasswordSupportLib.h [Guids] ## Security package token space guid. # Include/Guid/SecurityPkgTokenSpace.h gEfiSecurityPkgTokenSpaceGuid = { 0xd3fb176, 0x9569, 0x4d51, { 0xa3, 0xef, 0x7d, 0x61, 0xc6, 0x4f, 0xea, 0xba }} ## GUID used to "SecureBootEnable" variable for the Secure Boot feature enable/disable. # This variable is used for allowing a physically present user to disable Secure Boot via firmware setup without the possession of PKpriv. # Include/Guid/AuthenticatedVariableFormat.h gEfiSecureBootEnableDisableGuid = { 0xf0a30bc7, 0xaf08, 0x4556, { 0x99, 0xc4, 0x0, 0x10, 0x9, 0xc9, 0x3a, 0x44 } } ## GUID used to "CustomMode" variable for two Secure Boot modes feature: "Custom" and "Standard". # Standard Secure Boot mode is the default mode as UEFI Spec's description. # Custom Secure Boot mode allows for more flexibility as specified in the following: # Can enroll or delete PK without existing PK's private key. # Can enroll or delete KEK without existing PK's private key. # Can enroll or delete signature from DB/DBX without KEK's private key. # Include/Guid/AuthenticatedVariableFormat.h gEfiCustomModeEnableGuid = { 0xc076ec0c, 0x7028, 0x4399, { 0xa0, 0x72, 0x71, 0xee, 0x5c, 0x44, 0x8b, 0x9f } } ## GUID used to "VendorKeysNv" variable to record the out of band secure boot keys modification. # This variable is a read-only NV variable that indicates whether someone other than the platform vendor has used a # mechanism not defined by the UEFI Specification to transition the system to setup mode or to update secure boot keys. # Include/Guid/AuthenticatedVariableFormat.h gEfiVendorKeysNvGuid = { 0x9073e4e0, 0x60ec, 0x4b6e, { 0x99, 0x3, 0x4c, 0x22, 0x3c, 0x26, 0xf, 0x3c } } ## GUID used to "certdb"/"certdbv" variable to store the signer's certificates for common variables with EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute. # Include/Guid/AuthenticatedVariableFormat.h gEfiCertDbGuid = { 0xd9bee56e, 0x75dc, 0x49d9, { 0xb4, 0xd7, 0xb5, 0x34, 0x21, 0xf, 0x63, 0x7a } } ## Hob GUID used to pass a TCG_PCR_EVENT from a TPM PEIM to a TPM DXE Driver. # Include/Guid/TcgEventHob.h gTcgEventEntryHobGuid = { 0x2b9ffb52, 0x1b13, 0x416f, { 0xa8, 0x7b, 0xbc, 0x93, 0xd, 0xef, 0x92, 0xa8 }} ## Hob GUID used to pass a TCG_PCR_EVENT_2 from a TPM2 PEIM to a TPM2 DXE Driver. ## Include/Guid/TcgEventHob.h gTcgEvent2EntryHobGuid = { 0xd26c221e, 0x2430, 0x4c8a, { 0x91, 0x70, 0x3f, 0xcb, 0x45, 0x0, 0x41, 0x3f }} ## HOB GUID used to record TPM device error. # Include/Guid/TcgEventHob.h gTpmErrorHobGuid = { 0xef598499, 0xb25e, 0x473a, { 0xbf, 0xaf, 0xe7, 0xe5, 0x7d, 0xce, 0x82, 0xc4 }} ## HOB GUID used to pass all PEI measured FV info to DXE Driver. # Include/Guid/MeasuredFvHob.h gMeasuredFvHobGuid = { 0xb2360b42, 0x7173, 0x420a, { 0x86, 0x96, 0x46, 0xca, 0x6b, 0xab, 0x10, 0x60 }} ## GUID used to "PhysicalPresence" variable and "PhysicalPresenceFlags" variable for TPM request and response. # Include/Guid/PhysicalPresenceData.h gEfiPhysicalPresenceGuid = { 0xf6499b1, 0xe9ad, 0x493d, { 0xb9, 0xc2, 0x2f, 0x90, 0x81, 0x5c, 0x6c, 0xbc }} ## GUID used to "Tcg2PhysicalPresence" variable and "Tcg2PhysicalPresenceFlags" variable for TPM2 request and response. # Include/Guid/Tcg2PhysicalPresenceData.h gEfiTcg2PhysicalPresenceGuid = { 0xaeb9c5c1, 0x94f1, 0x4d02, { 0xbf, 0xd9, 0x46, 0x2, 0xdb, 0x2d, 0x3c, 0x54 }} ## GUID used for form browser, password credential and provider identifier. # Include/Guid/PwdCredentialProviderHii.h gPwdCredentialProviderGuid = { 0x78b9ec8b, 0xc000, 0x46c5, { 0xac, 0x93, 0x24, 0xa0, 0xc1, 0xbb, 0x0, 0xce }} ## GUID used for form browser, USB credential and provider identifier. # Include/Guid/UsbCredentialProviderHii.h gUsbCredentialProviderGuid = { 0xd0849ed1, 0xa88c, 0x4ba6, { 0xb1, 0xd6, 0xab, 0x50, 0xe2, 0x80, 0xb7, 0xa9 }} ## GUID used for FormSet guid and user profile variable. # Include/Guid/UserIdentifyManagerHii.h gUserIdentifyManagerGuid = { 0x3ccd3dd8, 0x8d45, 0x4fed, { 0x96, 0x2d, 0x2b, 0x38, 0xcd, 0x82, 0xb3, 0xc4 }} ## GUID used for FormSet. # Include/Guid/UserProfileManagerHii.h gUserProfileManagerGuid = { 0xc35f272c, 0x97c2, 0x465a, { 0xa2, 0x16, 0x69, 0x6b, 0x66, 0x8a, 0x8c, 0xfe }} ## GUID used for FormSet. # Include/Guid/TcgConfigHii.h gTcgConfigFormSetGuid = { 0xb0f901e4, 0xc424, 0x45de, { 0x90, 0x81, 0x95, 0xe2, 0xb, 0xde, 0x6f, 0xb5 }} ## GUID used for FormSet and config variable. # Include/Guid/Tcg2ConfigHii.h gTcg2ConfigFormSetGuid = {0x6339d487, 0x26ba, 0x424b, { 0x9a, 0x5d, 0x68, 0x7e, 0x25, 0xd7, 0x40, 0xbc }} ## GUID used for FormSet. # Include/Guid/SecureBootConfigHii.h gSecureBootConfigFormSetGuid = { 0x5daf50a5, 0xea81, 0x4de2, {0x8f, 0x9b, 0xca, 0xbd, 0xa9, 0xcf, 0x5c, 0x14}} ## GUID used to "TrEEPhysicalPresence" variable and "TrEEPhysicalPresenceFlags" variable for TPM2 request and response. # Include/Guid/TrEEPhysicalPresenceData.h gEfiTrEEPhysicalPresenceGuid = { 0xf24643c2, 0xc622, 0x494e, { 0x8a, 0xd, 0x46, 0x32, 0x57, 0x9c, 0x2d, 0x5b }} ## GUID value used for PcdTpmInstanceGuid to indicate TPM is disabled. # Include/Guid/TpmInstance.h gEfiTpmDeviceInstanceNoneGuid = { 0x00000000, 0x0000, 0x0000, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } } ## GUID value used for PcdTpmInstanceGuid to indicate TPM 1.2 device is selected to support. # Include/Guid/TpmInstance.h gEfiTpmDeviceInstanceTpm12Guid = { 0x8b01e5b6, 0x4f19, 0x46e8, { 0xab, 0x93, 0x1c, 0x53, 0x67, 0x1b, 0x90, 0xcc } } ## GUID value used for PcdTpmInstanceGuid to indicate discrete TPM 2.0 device is selected to support. # Include/Guid/TpmInstance.h gEfiTpmDeviceInstanceTpm20DtpmGuid = { 0x286bf25a, 0xc2c3, 0x408c, { 0xb3, 0xb4, 0x25, 0xe6, 0x75, 0x8b, 0x73, 0x17 } } ## GUID used to select supported TPM instance from UI. # Include/Guid/TpmInstance.h gEfiTpmDeviceSelectedGuid = { 0x7f4158d3, 0x74d, 0x456d, { 0x8c, 0xb2, 0x1, 0xf9, 0xc8, 0xf7, 0x9d, 0xaa } } ## GUID used for FormSet and config variable. # Include/Guid/TrEEConfigHii.h gTrEEConfigFormSetGuid = {0xc54b425f, 0xaa79, 0x48b4, { 0x98, 0x1f, 0x99, 0x8b, 0x3c, 0x4b, 0x64, 0x1c }} ## Include/OpalPasswordExtraInfoVariable.h gOpalExtraInfoVariableGuid = {0x44a2ad5d, 0x612c, 0x47b3, {0xb0, 0x6e, 0xc8, 0xf5, 0x0b, 0xfb, 0xf0, 0x7d}} [Ppis] ## The PPI GUID for that TPM physical presence should be locked. # Include/Ppi/LockPhysicalPresence.h gPeiLockPhysicalPresencePpiGuid = { 0xef9aefe5, 0x2bd3, 0x4031, { 0xaf, 0x7d, 0x5e, 0xfe, 0x5a, 0xbb, 0x9a, 0xd } } ## The PPI GUID for that TPM is initialized. # Include/Ppi/TpmInitialized.h gPeiTpmInitializedPpiGuid = { 0xe9db0d58, 0xd48d, 0x47f6, { 0x9c, 0x6e, 0x6f, 0x40, 0xe8, 0x6c, 0x7b, 0x41 }} ## The PPI GUID for that TPM initialization is done. TPM initialization may be success or fail. # Include/Ppi/TpmInitialized.h gPeiTpmInitializationDonePpiGuid = { 0xa030d115, 0x54dd, 0x447b, { 0x90, 0x64, 0xf2, 0x6, 0x88, 0x3d, 0x7c, 0xcc }} ## Include/Ppi/FirmwareVolumeInfoMeasurementExcluded.h gEfiPeiFirmwareVolumeInfoMeasurementExcludedPpiGuid = { 0x6e056ff9, 0xc695, 0x4364, { 0x9e, 0x2c, 0x61, 0x26, 0xf5, 0xce, 0xea, 0xae } } # # [Error.gEfiSecurityPkgTokenSpaceGuid] # 0x80000001 | Invalid value provided. # 0x80000002 | Reserved bits must be set to zero. # 0x80000003 | Incorrect progress or error code provided. # [PcdsFixedAtBuild, PcdsPatchableInModule] ## Image verification policy for OptionRom. Only following values are valid:

# NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.
# 0x00000000 Always trust the image.
# 0x00000001 Never trust the image.
# 0x00000002 Allow execution when there is security violation.
# 0x00000003 Defer execution when there is security violation.
# 0x00000004 Deny execution when there is security violation.
# 0x00000005 Query user when there is security violation.
# @Prompt Set policy for the image from OptionRom. # @ValidRange 0x80000001 | 0x00000000 - 0x00000005 gEfiSecurityPkgTokenSpaceGuid.PcdOptionRomImageVerificationPolicy|0x04|UINT32|0x00000001 ## Image verification policy for removable media which includes CD-ROM, Floppy, USB and network. # Only following values are valid:

# NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.
# 0x00000000 Always trust the image.
# 0x00000001 Never trust the image.
# 0x00000002 Allow execution when there is security violation.
# 0x00000003 Defer execution when there is security violation.
# 0x00000004 Deny execution when there is security violation.
# 0x00000005 Query user when there is security violation.
# @Prompt Set policy for the image from removable media. # @ValidRange 0x80000001 | 0x00000000 - 0x00000005 gEfiSecurityPkgTokenSpaceGuid.PcdRemovableMediaImageVerificationPolicy|0x04|UINT32|0x00000002 ## Image verification policy for fixed media which includes hard disk. # Only following values are valid:

# NOTE: Do NOT use 0x5 and 0x2 since it violates the UEFI specification and has been removed.
# 0x00000000 Always trust the image.
# 0x00000001 Never trust the image.
# 0x00000002 Allow execution when there is security violation.
# 0x00000003 Defer execution when there is security violation.
# 0x00000004 Deny execution when there is security violation.
# 0x00000005 Query user when there is security violation.
# @Prompt Set policy for the image from fixed media. # @ValidRange 0x80000001 | 0x00000000 - 0x00000005 gEfiSecurityPkgTokenSpaceGuid.PcdFixedMediaImageVerificationPolicy|0x04|UINT32|0x00000003 ## Defer Image Load policy settings. The policy is bitwise. # If a bit is set, the image from corresponding device will be trusted when loading. Or # the image will be deferred. The deferred image will be checked after user is identified.

# BIT0 - Image from unknown device.
# BIT1 - Image from firmware volume.
# BIT2 - Image from OptionRom.
# BIT3 - Image from removable media which includes CD-ROM, Floppy, USB and network.
# BIT4 - Image from fixed media device which includes hard disk.
# @Prompt Set policy whether trust image before user identification. # @ValidRange 0x80000002 | 0x00000000 - 0x0000001F gEfiSecurityPkgTokenSpaceGuid.PcdDeferImageLoadPolicy|0x0000001F|UINT32|0x0000004 ## Null-terminated Unicode string of the file name that is the default name to save USB credential. # The specified file should be saved at the root directory of USB storage disk. # @Prompt File name to save credential. gEfiSecurityPkgTokenSpaceGuid.PcdFixedUsbCredentialProviderTokenFileName|L"Token.bin"|VOID*|0x00000005 ## The size of Append variable buffer. This buffer is reserved for runtime use, OS can append data into one existing variable. # Note: This PCD is not been used. # @Prompt Max variable size for append operation. gEfiSecurityPkgTokenSpaceGuid.PcdMaxAppendVariableSize|0x2000|UINT32|0x30000005 ## Specifies the type of TCG platform that contains TPM chip.

# If 0, TCG platform type is PC client.
# If 1, TCG platform type is PC server.
# @Prompt Select platform type. # @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpmPlatformClass|0|UINT8|0x00000006 ## Progress Code for TPM device subclass definitions.

# EFI_PERIPHERAL_TPM = (EFI_PERIPHERAL | 0x000D0000) = 0x010D0000
# @Prompt Status Code for TPM device definitions # @ValidList 0x80000003 | 0x010D0000 gEfiSecurityPkgTokenSpaceGuid.PcdStatusCodeSubClassTpmDevice|0x010D0000|UINT32|0x00000007 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## Indicates the presence or absence of the platform operator during firmware booting. # If platform operator is not physical presence during boot. TPM will be locked and the TPM commands # that required operator physical presence can not run.

# TRUE - The platform operator is physically present.
# FALSE - The platform operator is not physically present.
# @Prompt Physical presence of the platform operator. gEfiSecurityPkgTokenSpaceGuid.PcdTpmPhysicalPresence|TRUE|BOOLEAN|0x00010001 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## Indicates whether TPM physical presence is locked during platform initialization. # Once it is locked, it can not be unlocked for TPM life time.

# TRUE - Lock TPM physical presence asserting method.
# FALSE - Not lock TPM physical presence asserting method.
# @Prompt Lock TPM physical presence asserting method. gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceLifetimeLock|FALSE|BOOLEAN|0x00010003 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## Indicates whether the platform supports the software method of asserting physical presence.

# TRUE - Supports the software method of asserting physical presence.
# FALSE - Does not support the software method of asserting physical presence.
# @Prompt Enable software method of asserting physical presence. gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceCmdEnable|TRUE|BOOLEAN|0x00010004 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## Indicates whether the platform supports the hardware method of asserting physical presence.

# TRUE - Supports the hardware method of asserting physical presence.
# FALSE - Does not support the hardware method of asserting physical presence.
# @Prompt Enable hardware method of asserting physical presence. gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceHwEnable|TRUE|BOOLEAN|0x00010005 [PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx] ## This PCD indicates if debugger exists.

# TRUE - Firmware debugger exists.
# FALSE - Firmware debugger doesn't exist.
# @Prompt Firmware debugger status. gEfiSecurityPkgTokenSpaceGuid.PcdFirmwareDebuggerInitialized|FALSE|BOOLEAN|0x00010009 ## This PCD indicates the initialization policy for TPM 2.0.

# If 0, no initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.
# If 1, initialization needed.
# @Prompt TPM 2.0 device initialization policy.
# @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpm2InitializationPolicy|1|UINT8|0x0001000A ## This PCD indicates the initialization policy for TPM 1.2.

# If 0, no initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.
# If 1, initialization needed.
# @Prompt TPM 1.2 device initialization policy. # @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpmInitializationPolicy|1|UINT8|0x0001000B ## This PCD indicates the TPM 2.0 SelfTest policy.

# if 0, no SelfTest needed - most likely used for fTPM, because it might already be tested.
# if 1, SelfTest needed.
# @Prompt TPM 2.0 device selftest. # @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpm2SelfTestPolicy|1|UINT8|0x0001000C ## This PCD indicates Static Core Root of Trust for Measurement (SCRTM) policy using TPM 2.0.

# if 0, no SCRTM measurement needed - In this case, it is already done.
# if 1, SCRTM measurement done by BIOS.
# @Prompt SCRTM policy setting for TPM 2.0 device. # @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpm2ScrtmPolicy|1|UINT8|0x0001000D ## This PCD indicates Static Core Root of Trust for Measurement (SCRTM) policy using TPM 1.2.

# if 0, no SCRTM measurement needed - In this case, it is already done.
# if 1, SCRTM measurement done by BIOS.
# @Prompt SCRTM policy setting for TPM 1.2 device # @ValidRange 0x80000001 | 0x00 - 0x1 gEfiSecurityPkgTokenSpaceGuid.PcdTpmScrtmPolicy|1|UINT8|0x0001000E ## Guid name to identify TPM instance.

# TPM_DEVICE_INTERFACE_NONE means disable.
# TPM_DEVICE_INTERFACE_TPM12 means TPM 1.2 DTPM.
# TPM_DEVICE_INTERFACE_DTPM2 means TPM 2.0 DTPM.
# Other GUID value means other TPM 2.0 device.
# @Prompt TPM device type identifier gEfiSecurityPkgTokenSpaceGuid.PcdTpmInstanceGuid |{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x0001000F ## This PCD indicates if BIOS auto detect TPM1.2 or dTPM2.0.

# FALSE - No auto detection.
# TRUE - Auto detection.
# @Prompt TPM type detection. gEfiSecurityPkgTokenSpaceGuid.PcdTpmAutoDetection|TRUE|BOOLEAN|0x00010011 ## This PCD indicates TPM base address.

# @Prompt TPM device address. gEfiSecurityPkgTokenSpaceGuid.PcdTpmBaseAddress|0xFED40000|UINT64|0x00010012 ## This PCR means the OEM configurated number of PCR banks. # 0 means dynamic get from supported HASH algorithm # @Prompt OEM configurated number of PCR banks. gEfiSecurityPkgTokenSpaceGuid.PcdTcg2NumberOfPCRBanks|0x0|UINT32|0x00010015 ## Provides one or more SHA 256 Hashes of the RSA 2048 public keys used to verify Recovery and Capsule Update images # # @Prompt One or more SHA 256 Hashes of RSA 2048 bit public keys used to verify Recovery and Capsule Update images # gEfiSecurityPkgTokenSpaceGuid.PcdRsa2048Sha256PublicKeyBuffer|{0x91, 0x29, 0xc4, 0xbd, 0xea, 0x6d, 0xda, 0xb3, 0xaa, 0x6f, 0x50, 0x16, 0xfc, 0xdb, 0x4b, 0x7e, 0x3c, 0xd6, 0xdc, 0xa4, 0x7a, 0x0e, 0xdd, 0xe6, 0x15, 0x8c, 0x73, 0x96, 0xa2, 0xd4, 0xa6, 0x4d}|VOID*|0x00010013 ## This PCD defines minimum length(in bytes) of the system preboot TCG event log area(LAML). # For PC Client Implementation spec up to and including 1.2 the minimum log size is 64KB. # @Prompt Minimum length(in bytes) of the system preboot TCG event log area(LAML). gEfiSecurityPkgTokenSpaceGuid.PcdTcgLogAreaMinLen|0x10000|UINT32|0x00010017 ## This PCD defines length(in bytes) of the TCG2 Final event log area. # @Prompt Length(in bytes) of the TCG2 Final event log area. gEfiSecurityPkgTokenSpaceGuid.PcdTcg2FinalLogAreaLen|0x8000|UINT32|0x00010018 [PcdsDynamic, PcdsDynamicEx] ## This PCD indicates Hash mask for TPM 2.0.

# If this bit is set, that means this algorithm is needed to extend to PCR.
# If this bit is clear, that means this algorithm is NOT needed to extend to PCR.
# BIT0 - SHA1.
# BIT1 - SHA256.
# BIT2 - SHA384.
# BIT3 - SHA512.
# @Prompt Hash mask for TPM 2.0 # @ValidRange 0x80000001 | 0x00000000 - 0x0000000F gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask|0x0000000F|UINT32|0x00010010 ## This PCD indicated final BIOS supported Hash mask. # Bios may choose to register a subset of PcdTpm2HashMask. # So this PCD is final value of how many hash algo is extended to PCR. # @Prompt Hash Algorithm bitmap. gEfiSecurityPkgTokenSpaceGuid.PcdTcg2HashAlgorithmBitmap|0xFFFFFFFF|UINT32|0x00010016 [UserExtensions.TianoCore."ExtraFiles"] SecurityPkgExtra.uni