// /** // // (C) Copyright 2015-2016 Hewlett Packard Enterprise Development LP
// Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.
// This program and the accompanying materials // are licensed and made available under the terms and conditions of the BSD License // which accompanies this distribution. The full text of the license may be found at // http://opensource.org/licenses/bsd-license.php // // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. // // Module Name: // // Tftp.uni // // Abstract: // // String definitions for UEFI Shell TFTP command // // // **/ /=# #langdef en-US "english" #string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments\r\n" #string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments\r\n" #string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n" #string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n" #string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n" #string STR_GEN_CRLF #language en-US "\r\n" #string STR_TFTP_ERR_NO_NIC #language en-US "No network interface card found.\r\n" #string STR_TFTP_ERR_NIC_NAME #language en-US "Failed to get the name of the network interface card number %d - %r\r\n" #string STR_TFTP_ERR_OPEN_PROTOCOL #language en-US "Unable to open MTFTP4 protocol on '%H%s%N' - %r\r\n" #string STR_TFTP_ERR_CONFIGURE #language en-US "Unable to configure MTFTP4 protocol on '%H%s%N' - %r\r\n" #string STR_TFTP_ERR_FILE_SIZE #language en-US "Unable to get the size of the file '%H%s%N' on '%H%s%N' - %r\r\n" #string STR_TFTP_ERR_DOWNLOAD #language en-US "Unable to download the file '%H%s%N' on '%H%s%N' - %r\r\n" #string STR_TFTP_ERR_WRITE #language en-US "Unable to write into file '%H%s%N' - %r\r\n" #string STR_TFTP_ERR_NIC_NOT_FOUND #language en-US "Network Interface Card '%H%s%N' not found.\r\n" #string STR_TFTP_DOWNLOADING #language en-US "Downloading the file '%H%s%N'\r\n" #string STR_TFTP_STRING #language en-US "%s" #string STR_GET_HELP_TFTP #language en-US "" ".TH tftp 0 "Download a file from TFTP server."\r\n" ".SH NAME\r\n" "Download a file from TFTP server.\r\n" ".SH SYNOPSIS\r\n" " \r\n" "TFTP [-i interface] [-l ] [-r ] [-c ] [-t ]\r\n" " [-s ] host remotefilepath [localfilepath]\r\n" ".SH OPTIONS\r\n" " \r\n" " -i interface - Specifies an adapter name, i.e., eth0.\r\n" " -l port - Specifies the local port number. Default value is 0\r\n" " and the port number is automatically assigned.\r\n" " -r port - Specifies the remote port number. Default value is 69.\r\n" " -c - The number of times to transmit request packets and\r\n" " wait for a response. The default value is 6.\r\n" " -t - The number of seconds to wait for a response after\r\n" " sending a request packet. Default value is 4s.\r\n" " -s - Specifies the TFTP blksize option as defined in RFC 2348.\r\n" " Valid range is between 8 and 65464, default value is 512.\r\n" " host - Specify TFTP Server IPv4 address.\r\n" " remotefilepath - TFTP server file path to download the file.\r\n" " localfilepath - Local destination file path.\r\n" ".SH DESCRIPTION\r\n" " \r\n" "NOTES:\r\n" " 1. The TFTP command allows to get the file specified by its 'remotefilepath'\r\n" " path from the TFTP server specified by its 'host' IPv4 address. If the\r\n" " optional 'localfilepath' parameter is provided, the downloaded file is\r\n" " stored locally using the provided file path. If the local file path is\r\n" " not specified, the file is stored in the current directory using the file\r\n" " server's name.\r\n" " 2. Before using the TFTP command, the network interface intended to be\r\n" " used to retrieve the file must be configured. This configuration may be\r\n" " done by means of the 'ifconfig' command.\r\n" " 3. If a network interface is defined with the '-i' option then only this\r\n" " interface will be used to retrieve the remote file. Otherwise, all network\r\n" " interfaces are tried in the order they have been discovered during the\r\n" " DXE phase.\r\n" ".SH EXAMPLES\r\n" " \r\n" "EXAMPLES:\r\n" " * To get the file "dir1/file1.dat" from the TFTP server 192.168.1.1 and\r\n" " store it as file2.dat in the current directory :\r\n" " fs0:\> tftp 192.168.1.1 dir1/file1.dat file2.dat\r\n" ".SH RETURNVALUES\r\n" " \r\n" "RETURN VALUES:\r\n" " SHELL_SUCCESS The action was completed as requested.\r\n" " SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n" " formatted or its value was out of bounds.\r\n"