// /** // // (C) Copyright 2013-2015 Hewlett-Packard Development Company, L.P.
// Copyright (c) 2010 - 2017, Intel Corporation. All rights reserved.
// (C) Copyright 2017 Hewlett Packard Enterprise Development LP
// This program and the accompanying materials // are licensed and made available under the terms and conditions of the BSD License // which accompanies this distribution. The full text of the license may be found at // http://opensource.org/licenses/bsd-license.php // // THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, // WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. // // Module Name: // // UefiShellNetwork1CommandsLib.uni // // Abstract: // // String definitions for UEFI Shell 2.0 network 1 commands // // // **/ /=# #langdef en-US "english" #string STR_GEN_TOO_MANY #language en-US "%H%s%N: Too many arguments.\r\n" #string STR_GEN_TOO_FEW #language en-US "%H%s%N: Too few arguments.\r\n" #string STR_GEN_PARAM_INV #language en-US "%H%s%N: Invalid argument - '%H%s%N'\r\n" #string STR_GEN_PROBLEM #language en-US "%H%s%N: Unknown flag - '%H%s%N'\r\n" #string STR_GEN_PROBLEM_OP2 #language en-US "%H%s%N: Invalid argument - '%H%s%N'. Expected '%B%s%N' or '%B%s%N'.\r\n" #string STR_GEN_PROBLEM_VAL #language en-US "%H%s%N: Bad value - '%H%s%N' for flag - '%H%s%N'\r\n" #string STR_GEN_NO_VALUE #language en-US "%H%s%N: Missing argument for flag - '%H%s%N'\r\n" #string STR_GEN_ERR_AD #language en-US "%H%s%N: Access denied.\r\n" #string STR_GEN_ERR_UK #language en-US "%H%s%N: Status: %r\r\n" #string STR_GEN_PARAM_CON #language en-US "%H%s%N: Parameters conflict.\r\n" #string STR_GEN_FILE_OPEN_FAIL #language en-US "%H%s%N: Cannot open file - '%H%s%N'\r\n" #string STR_GEN_FILE_AD #language en-US "%H%s%N: Access file error - '%H%s%N'\r\n" #string STR_GEN_CRLF #language en-US "\r\n" #string STR_GEN_NO_FILES #language en-US "%H%s%N: No matching files were found.\r\n" #string STR_GEN_DIR_NF #language en-US "%H%s%N: Directory not found - '%H%s%N'\r\n" #string STR_GEN_FILE_NF #language en-US "%H%s%N: File not found - '%H%s%N'\r\n" #string STR_GEN_IS_DIR #language en-US "%H%s%N: '%H%s%N' is a directory\r\n" #string STR_GEN_PROTOCOL_NF #language en-US "%H%s%N: The protocol '%H%s%N' is required and not found (%g).\r\n" #string STR_GEN_OUT_MEM #language en-US "%H%s%N: Memory allocation was not successful.\r\n" #string STR_PING_INVALID_SOURCE #language en-US "%Ping: Require source interface option\r\n" #string STR_PING_CONFIG #language en-US "Config %r\r\n" #string STR_PING_GETMODE #language en-US "GetModeData %r\r\n" #string STR_PING_GETDATA #language en-US "GetData %r\r\n" #string STR_PING_RECEIVE #language en-US "Receive %r\r\n" #string STR_PING_SEND_REQUEST #language en-US "Echo request sequence %d did not complete successfully.\r\n" #string STR_PING_NOSOURCE_INDO #language en-US "There are no sources in %s's multicast domain.\r\n" #string STR_PING_NETWORK_ERROR #language en-US "%H%s%N: Network function failed with %r\r\n" #string STR_PING_CONFIGD_NIC_NF #language en-US "%H%s%N: No configured interfaces were found.\r\n" #string STR_PING_NOROUTE_FOUND #language en-US "There is no route to the destination '%B%s%N' from the source '%B%s%N' was found.\r\n" #string STR_PING_START #language en-US "Ping %s %d data bytes.\r\n" #string STR_PING_TIMEOUT #language en-US "Echo request sequence %d timeout.\r\n" #string STR_PING_REPLY_INFO #language en-US "%d bytes from %s : icmp_seq=%d ttl=%d time%d~%dms\r\n" #string STR_PING_STAT #language en-US "\n%d packets transmitted, %d received, %d%% packet loss, time %dms\r\n" #string STR_PING_RTT #language en-US "\nRtt(round trip time) min=%d~%dms max=%d~%dms avg=%d~%dms\r\n" #string STR_IFCONFIG_UNSUPPORTED_OPTION #language en-US "The option '%H%s%N' is unsupported now.\n" #string STR_IFCONFIG_LACK_OPTION #language en-US "Flags lack. Please type 'ifConfig -?' for help info.\n" #string STR_IFCONFIG_LACK_INTERFACE #language en-US "Lack interface name.\n" #string STR_IFCONFIG_LACK_COMMAND #language en-US "Lack interface config option.\n" #string STR_IFCONFIG_INVALID_INTERFACE #language en-US "Invalid interface name.\n" #string STR_IFCONFIG_INVALID_IPADDRESS #language en-US "Invalid ipv4 address: '%H%s%N'\n" #string STR_IFCONFIG_INVALID_GATEWAY #language en-US "Invalid gateway address: '%H%s%N'\n" #string STR_IFCONFIG_DUPLICATE_COMMAND #language en-US "Duplicate commands. Bad command %H%s%N is skipped.\n" #string STR_IFCONFIG_CONFLICT_COMMAND #language en-US "Conflict commands. Bad command %H%s%N is skipped.\n" #string STR_IFCONFIG_UNKNOWN_COMMAND #language en-US "Unknown commands. Bad command %H%s%N is skipped.\n" #string STR_IFCONFIG_SET_ADDR_FAILED #language en-US "Failed to set address.\n" #string STR_IFCONFIG_ROUTES_SIZE #language en-US "\n%H Routes (%d entries):\n" #string STR_IFCONFIG_ROUTES_ENTRY_INDEX #language en-US "%H Entry[%d]\n" #string STR_IFCONFIG_SHOW_IP_ADDR #language en-US "%12s: %N%d.%d.%d.%d\n" #string STR_IFCONFIG_INFO_NEWLINE #language en-US "\n" #string STR_IFCONFIG_INFO_DNS_ADDR_BODY #language en-US "%8d.%d.%d.%d\n" #string STR_IFCONFIG_INFO_BREAK #language en-US "\n-----------------------------------------------------------------\n" #string STR_IFCONFIG_INFO_COLON #language en-US ":" #string STR_IFCONFIG_INFO_IF_NAME #language en-US "\n%Hname : %s%N\n" #string STR_IFCONFIG_INFO_MEDIA_STATE #language en-US "%HMedia State : %s%N\n" #string STR_IFCONFIG_INFO_POLICY_DHCP #language en-US "%Hpolicy : dhcp%N\n" #string STR_IFCONFIG_INFO_POLICY_MAN #language en-US "%Hpolicy : static%N\n" #string STR_IFCONFIG_INFO_MAC_ADDR_HEAD #language en-US "%Hmac addr : %N" #string STR_IFCONFIG_INFO_MAC_ADDR_BODY #language en-US "%02x" #string STR_IFCONFIG_INFO_IP_ADDR_HEAD #language en-US "\n%Hipv4 address : %N" #string STR_IFCONFIG_INFO_SUBNET_MASK_HEAD #language en-US "\n%Hsubnet mask : %N" #string STR_IFCONFIG_INFO_GATEWAY_HEAD #language en-US "\n%Hdefault gateway: %N" #string STR_IFCONFIG_INFO_DNS_ADDR_HEAD #language en-US "\n%HDNS server : %N\n" #string STR_IFCONFIG_INFO_IP_ADDR_BODY #language en-US "%d.%d.%d.%d\n" #string STR_GET_HELP_PING #language en-US "" ".TH ping 0 "Ping the target host with an IPv4 stack."\r\n" ".SH NAME\r\n" "Ping the target host with an IPv4 stack.\r\n" ".SH SYNOPSIS\r\n" " \r\n" "PING [-n count] [-l size] [-s SourceIp] TargetIp\r\n" ".SH OPTIONS\r\n" " \r\n" " -n - Specifies the number of echo request datagrams to be sent.\r\n" " -l - Specifies the size of the data buffer in the echo request datagram.\r\n" " -s - Specifies the source adapter as IPv4 address.\r\n" " SourceIp - Specifies the IPv4 address of the source machine.\r\n" " TargetIp - Specifies the IPv4 address of the target machine.\r\n" ".SH DESCRIPTION\r\n" " \r\n" "NOTES:\r\n" " 1. This command uses the ICMPv4 ECHO_REQUEST datagram to elicit an\r\n" " ECHO_REPLY from a host.\r\n" ".SH EXAMPLES\r\n" " \r\n" "EXAMPLES:\r\n" " * To ping the target host with 64 bytes data:\r\n" " fs0:\> ping -l 64 192.168.0.1\r\n" " \r\n" " * To ping the target host by sending 20 echo request datagrams:\r\n" " fs0:\> ping -n 20 202.120.100.1\r\n" " \r\n" " * To ping the target host by specifying the source adapter as IPv4 address:\r\n" " fs0:\> ping -s 202.120.100.12 202.120.100.1\r\n" ".SH RETURNVALUES\r\n" " \r\n" "RETURN VALUES:\r\n" " SHELL_SUCCESS The action was completed as requested.\r\n" " SHELL_INVALID_PARAMETER One of the passed-in parameters was incorrectly\r\n" " formatted or its value was out of bounds.\r\n" #string STR_GET_HELP_IFCONFIG #language en-US "" ".TH ifconfig 0 "Modifies the default IP address of the UEFI IPv4 Network Stack."\r\n" ".SH NAME\r\n" "Modifies the default IP address of the UEFI IPv4 Network Stack.\r\n" ".SH SYNOPSIS\r\n" " \r\n" "IFCONFIG [-r [Name]] [-l [Name]]\r\n" "IFCONFIG [-s dhcp | > | >]\r\n" ".SH OPTIONS\r\n" " \r\n" " -r - Renew configuration of interface and set dhcp policy.\r\n" " -l - Lists the configuration.\r\n" " -s - Sets the configuration.\r\n" " Name - Specifies an adapter name (for example, eth0).\r\n" " IP - Specifies the IPv4 address in four integer values:\r\n" " - Example: 192.168.0.10\r\n" " SubnetMask - Specifies a subnet mask in four integer values:\r\n" " - Example: 255.255.255.0\r\n" " GatewayMask - Specifies a default gateway in four integer values:\r\n" " - Example: 192.168.0.1\r\n" ".SH DESCRIPTION\r\n" " \r\n" "NOTES:\r\n" " 1. This command modifies the default IP address for the UEFI IPv4\r\n" " network stack.\r\n" " 2. Use '-r' to renew configuration of interface and set dhcp policy.\r\n" " 3. Use '-l' to list the DNS and other address related settings for all\r\n" " interfaces or the specified interface.\r\n" " 4. Use '-s static ' with \r\n" " static IPv4 address configuration for specified interface.\r\n" " 5. Use '-s dhcp' for DHCPv4 to request the IPv4 address\r\n" " configuration dynamically for specified interface.\r\n" " 6. Use '-s dns ' must under manual policy.\r\n" ".SH EXAMPLES\r\n" " \r\n" "EXAMPLES:\r\n" " * To list the configuration for the eth0 interface:\r\n" " fs0:\> ifconfig -l eth0\r\n" " \r\n" " * To use DHCPv4 to request the IPv4 address configuration dynamically for the\r\n" " eth0 interface:\r\n" " fs0:\> ifconfig -s eth0 dhcp\r\n" " \r\n" " * To use the static IPv4 address configuration for the eth0 interface:\r\n" " fs0:\> ifconfig -s eth0 static 192.168.0.5 255.255.255.0 192.168.0.1\r\n" " \r\n" " * To configure DNS server address for the eth0 interface:\r\n" " fs0:\> ifconfig -s eth0 dns 192.168.0.8 192.168.0.9\r\n"