Remove ArmEbPkg and replace with ArmRealViewEbPkg. Ported ArmRealViewEbPkg to have...

[mirror_edk2.git] / ArmEbPkg / Include / ArmEb / ArmEbTimer.h

diff --git a/ArmEbPkg/Include/ArmEb/ArmEbTimer.h b/ArmEbPkg/Include/ArmEb/ArmEbTimer.h
deleted file mode 100755 (executable)
index 008a6be..0000000
--- a/ArmEbPkg/Include/ArmEb/ArmEbTimer.h
+++ /dev/null
@@ -1,78 +0,0 @@
-/*++\r
-\r
-Copyright (c) 2009, Hewlett-Packard Company. All rights reserved.<BR>\r
-This program and the accompanying materials                          \r
-are licensed and made available under the terms and conditions of the BSD License         \r
-which accompanies this distribution.  The full text of the license may be found at        \r
-http://opensource.org/licenses/bsd-license.php                                            \r
-                                                                                          \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.  \r
-\r
-Module Name:\r
-\r
-  Timer.h\r
-\r
-Abstract:\r
-\r
-  Driver implementing the EFI 2.0 timer protocol using the ARM SP804 timer.\r
-\r
---*/\r
-\r
-#ifndef _TIMER_SP804_H__\r
-#define _TIMER_SP804_H__\r
-\r
-\r
-\r
-// EB board constants\r
-#define EB_SP810_CTRL_BASE            0x10001000\r
-#define EB_SP804_TIMER0_BASE          0x10011000\r
-#define EB_SP804_TIMER1_BASE          0x10011020\r
-#define EB_SP804_TIMER2_BASE          0x10012000\r
-#define EB_SP804_TIMER3_BASE          0x10012020\r
-\r
-#define EB_TIMER01_INTERRUPT_NUM      36\r
-#define EB_TIMER23_INTERRUPT_NUM      37\r
-\r
-// SP804 Timer constants\r
-#define SP804_TIMER_LOAD_REG          0x00\r
-#define SP804_TIMER_CURRENT_REG       0x04\r
-#define SP804_TIMER_CONTROL_REG       0x08\r
-#define SP804_TIMER_INT_CLR_REG       0x0C\r
-#define SP804_TIMER_RAW_INT_STS_REG   0x10\r
-#define SP804_TIMER_MSK_INT_STS_REG   0x14\r
-#define SP804_TIMER_BG_LOAD_REG       0x18\r
-\r
-// Timer control register bit definitions\r
-#define SP804_TIMER_CTRL_ONESHOT        BIT0\r
-#define SP804_TIMER_CTRL_32BIT          BIT1\r
-#define SP804_TIMER_CTRL_PRESCALE_MASK  (BIT3|BIT2)\r
-#define SP804_PRESCALE_DIV_1            0\r
-#define SP804_PRESCALE_DIV_16           BIT2\r
-#define SP804_PRESCALE_DIV_256          BIT3\r
-#define SP804_TIMER_CTRL_INT_ENABLE     BIT5\r
-#define SP804_TIMER_CTRL_PERIODIC       BIT6\r
-#define SP804_TIMER_CTRL_ENABLE         BIT7\r
-\r
-// SP810 System Controller constants\r
-#define SP810_SYS_CTRL_REG              0x00\r
-#define SP810_SYS_CTRL_TIMER0_TIMCLK    BIT15 // 0=REFCLK, 1=TIMCLK\r
-#define SP810_SYS_CTRL_TIMER0_EN        BIT16\r
-#define SP810_SYS_CTRL_TIMER1_TIMCLK    BIT17 // 0=REFCLK, 1=TIMCLK\r
-#define SP810_SYS_CTRL_TIMER1_EN        BIT18\r
-#define SP810_SYS_CTRL_TIMER2_TIMCLK    BIT19 // 0=REFCLK, 1=TIMCLK\r
-#define SP810_SYS_CTRL_TIMER2_EN        BIT20\r
-#define SP810_SYS_CTRL_TIMER3_TIMCLK    BIT21 // 0=REFCLK, 1=TIMCLK\r
-#define SP810_SYS_CTRL_TIMER3_EN        BIT22\r
-\r
-// default timer tick period - 1ms, or 10000 units of 100ns\r
-//#define TIMER_DEFAULT_PERIOD            10000\r
-\r
-// default timer tick period - 50ms, or 500000 units of 100ns\r
-#define TIMER_DEFAULT_PERIOD            500000\r
-\r
-// default timer tick period - 500ms, or 5000000 units of 100ns\r
-//#define TIMER_DEFAULT_PERIOD            5000000\r
-\r
-#endif\r
-\r