Remove ArmEbPkg and replace with ArmRealViewEbPkg. Ported ArmRealViewEbPkg to have...

[mirror_edk2.git] / ArmEbPkg / Include / ArmEb / ArmEbUart.h

diff --git a/ArmEbPkg/Include/ArmEb/ArmEbUart.h b/ArmEbPkg/Include/ArmEb/ArmEbUart.h
deleted file mode 100755 (executable)
index 642b83a..0000000
--- a/ArmEbPkg/Include/ArmEb/ArmEbUart.h
+++ /dev/null
@@ -1,75 +0,0 @@
-/*++\r
-\r
-Copyright (c) 2006 - 2009, Intel Corporation. All rights reserved.<BR>\r
-Portions copyright (c) 2009, Hewlett-Packard Company. All rights reserved.<BR>\r
-Portions copyright (c) 2010, Apple Inc. All rights reserved.<BR>\r
-This program and the accompanying materials                          \r
-are licensed and made available under the terms and conditions of the BSD License         \r
-which accompanies this distribution.  The full text of the license may be found at        \r
-http://opensource.org/licenses/bsd-license.php                                            \r
-                                                                                          \r
-THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,                     \r
-WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.  \r
-\r
---*/\r
-\r
-#ifndef __ARM_EB_UART_H__\r
-#define __ARM_EB_UART_H__\r
-\r
-\r
-#define SERIAL_PORT_MAX_TIMEOUT            100000000    // 100 seconds\r
-\r
-\r
-// EB constants\r
-#define EB_UART1_BASE   0x10009000\r
-\r
-// PL011 Registers\r
-#define UARTDR          0x000\r
-#define UARTRSR         0x004\r
-#define UARTECR         0x004\r
-#define UARTFR          0x018\r
-#define UARTILPR        0x020\r
-#define UARTIBRD        0x024\r
-#define UARTFBRD        0x028\r
-#define UARTLCR_H       0x02C\r
-#define UARTCR          0x030\r
-#define UARTIFLS        0x034\r
-#define UARTIMSC        0x038\r
-#define UARTRIS         0x03C\r
-#define UARTMIS         0x040\r
-#define UARTICR         0x044\r
-#define UARTDMACR       0x048\r
-\r
-// If the required baud rate is 115200 and UARTCLK = 24MHz then:\r
-// Baud Rate Divisor = (24×10^6)/(16×115200) = 13.020833\r
-// This means BRDI = 13 and BRDF = 0.020833\r
-// Therefore, fractional part, m = integer(0.020833×64) = integer(1.33331) = 1\r
-// Generated baud rate divider = 13+1/64 = 13.015625\r
-// Generated baud rate = (24×10^6)/(16×13.015625) = 115246.098\r
-// Error = (115246.098-115200)/115200 × 100 = 0.04%\r
-#define UART_115200_IDIV    13\r
-#define UART_115200_FDIV    1\r
-\r
-// add more baud rates here as needed\r
-\r
-// data status bits\r
-#define UART_DATA_ERROR_MASK      0x0F00\r
-\r
-// status reg bits\r
-#define UART_STATUS_ERROR_MASK    0x0F\r
-\r
-// flag reg bits\r
-#define UART_TX_EMPTY_FLAG_MASK   0x80\r
-#define UART_RX_FULL_FLAG_MASK    0x40\r
-#define UART_TX_FULL_FLAG_MASK    0x20\r
-#define UART_RX_EMPTY_FLAG_MASK   0x10\r
-#define UART_BUSY_FLAG_MASK       0x08\r
-\r
-// control reg bits\r
-#define UART_CTSEN_CONTROL_MASK   0x8000\r
-#define UART_RTSEN_CONTROL_MASK   0x4000\r
-#define UART_RTS_CONTROL_MASK     0x0800\r
-#define UART_DTR_CONTROL_MASK     0x0400\r
-\r
-\r
-#endif \r