/** @file
*
-* Copyright (c) 2011, ARM Limited. All rights reserved.
+* Copyright (c) 2011-2012, ARM Limited. All rights reserved.
*
* This program and the accompanying materials
* are licensed and made available under the terms and conditions of the BSD License
**/
#include <Library/IoLib.h>
-#include <Library/ArmTrustZoneLib.h>
#include <Library/ArmPlatformLib.h>
#include <Library/DebugLib.h>
#include <Library/PcdLib.h>
#include <Drivers/PL301Axi.h>
#include <Drivers/SP804Timer.h>
+#include <Ppi/ArmMpCoreInfo.h>
+
+#include <ArmPlatform.h>
+
#define SerialPrint(txt) SerialPortWrite ((UINT8*)(txt), AsciiStrLen(txt)+1);
+ARM_CORE_INFO mVersatileExpressMpCoreInfoCTA9x4[] = {
+ {
+ // Cluster 0, Core 0
+ 0x0, 0x0,
+
+ // MP Core MailBox Set/Get/Clear Addresses and Clear Value
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
+ (UINT64)0xFFFFFFFF
+ },
+ {
+ // Cluster 0, Core 1
+ 0x0, 0x1,
+
+ // MP Core MailBox Set/Get/Clear Addresses and Clear Value
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
+ (UINT64)0xFFFFFFFF
+ },
+ {
+ // Cluster 0, Core 2
+ 0x0, 0x2,
+
+ // MP Core MailBox Set/Get/Clear Addresses and Clear Value
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
+ (UINT64)0xFFFFFFFF
+ },
+ {
+ // Cluster 0, Core 3
+ 0x0, 0x3,
+
+ // MP Core MailBox Set/Get/Clear Addresses and Clear Value
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_SET_REG,
+ (EFI_PHYSICAL_ADDRESS)ARM_VE_SYS_FLAGS_CLR_REG,
+ (UINT64)0xFFFFFFFF
+ }
+};
+
// DDR2 timings
PL341_DMC_CONFIG DDRTimings = {
- .base = ARM_VE_DMC_BASE,
- .phy_ctrl_base = 0x0, //There is no DDR2 PHY controller on CTA9 test chip
.MaxChip = 1,
.IsUserCfg = TRUE,
.User0Cfg = 0x7C924924,
.User2Cfg = (TC_UIOLHXC_VALUE << TC_UIOLHNC_SHIFT) | (TC_UIOLHXC_VALUE << TC_UIOLHPC_SHIFT) | (0x1 << TC_UIOHOCT_SHIFT) | (0x1 << TC_UIOHSTOP_SHIFT),
.HasQos = TRUE,
- .refresh_prd = 0x3D0,
- .cas_latency = 0x8,
- .write_latency = 0x3,
+ .RefreshPeriod = 0x3D0,
+ .CasLatency = 0x8,
+ .WriteLatency = 0x3,
.t_mrd = 0x2,
.t_ras = 0xA,
.t_rc = 0xE,
.ExtModeReg = DDR_EMR_RTT_50R | (DDR_EMR_ODS_VAL << DDR_EMR_ODS_MASK),
};
-/**
- Return if Trustzone is supported by your platform
-
- A non-zero value must be returned if you want to support a Secure World on your platform.
- ArmVExpressTrustzoneInit() will later set up the secure regions.
- This function can return 0 even if Trustzone is supported by your processor. In this case,
- the platform will continue to run in Secure World.
-
- @return A non-zero value if Trustzone supported.
-
-**/
-UINTN
-ArmPlatformTrustzoneSupported (
- VOID
- )
-{
- return (MmioRead32(ARM_VE_SYS_CFGRW1_REG) & ARM_VE_CFGRW1_TZASC_EN_BIT_MASK);
-}
-
/**
Return the current Boot Mode
VOID
)
{
- return BOOT_WITH_FULL_CONFIGURATION;
-}
-
-/**
- Remap the memory at 0x0
-
- Some platform requires or gives the ability to remap the memory at the address 0x0.
- This function can do nothing if this feature is not relevant to your platform.
-
-**/
-VOID
-ArmPlatformBootRemapping (
- VOID
- )
-{
- UINT32 Value;
-
- if (FeaturePcdGet(PcdNorFlashRemapping)) {
- SerialPrint ("Secure ROM at 0x0\n\r");
+ if (MmioRead32(ARM_VE_SYS_FLAGS_NV_REG) == 0) {
+ return BOOT_WITH_FULL_CONFIGURATION;
} else {
- Value = MmioRead32(ARM_VE_SYS_CFGRW1_REG); //Scc - CFGRW1
- // Remap the DRAM to 0x0
- MmioWrite32(ARM_VE_SYS_CFGRW1_REG, (Value & 0x0FFFFFFF) | ARM_VE_CFGRW1_REMAP_DRAM);
+ return BOOT_ON_S2_RESUME;
}
}
/**
Initialize controllers that must setup in the normal world
- This function is called by the ArmPlatformPkg/Pei or ArmPlatformPkg/Pei/PlatformPeim
+ This function is called by the ArmPlatformPkg/PrePi or ArmPlatformPkg/PlatformPei
in the PEI phase.
**/
VOID
)
{
- PL341DmcInit(&DDRTimings);
+ UINT32 Value;
+
+ // Memory Map remapping
+ if (FeaturePcdGet(PcdNorFlashRemapping)) {
+ SerialPrint ("Secure ROM at 0x0\n\r");
+ } else {
+ Value = MmioRead32(ARM_VE_SYS_CFGRW1_REG); //Scc - CFGRW1
+ // Remap the DRAM to 0x0
+ MmioWrite32(ARM_VE_SYS_CFGRW1_REG, (Value & 0x0FFFFFFF) | ARM_VE_CFGRW1_REMAP_DRAM);
+ }
+
+ PL341DmcInit(ARM_VE_DMC_BASE, &DDRTimings);
PL301AxiInit(ARM_VE_FAXI_BASE);
}
+
+EFI_STATUS
+PrePeiCoreGetMpCoreInfo (
+ OUT UINTN *CoreCount,
+ OUT ARM_CORE_INFO **ArmCoreTable
+ )
+{
+ *CoreCount = sizeof(mVersatileExpressMpCoreInfoCTA9x4) / sizeof(ARM_CORE_INFO);
+ *ArmCoreTable = mVersatileExpressMpCoreInfoCTA9x4;
+
+ return EFI_SUCCESS;
+}
+
+// Needs to be declared in the file. Otherwise gArmMpCoreInfoPpiGuid is undefined in the contect of PrePeiCore
+EFI_GUID mArmMpCoreInfoPpiGuid = ARM_MP_CORE_INFO_PPI_GUID;
+ARM_MP_CORE_INFO_PPI mMpCoreInfoPpi = { PrePeiCoreGetMpCoreInfo };
+
+EFI_PEI_PPI_DESCRIPTOR gPlatformPpiTable[] = {
+ {
+ EFI_PEI_PPI_DESCRIPTOR_PPI,
+ &mArmMpCoreInfoPpiGuid,
+ &mMpCoreInfoPpi
+ }
+};
+
+VOID
+ArmPlatformGetPlatformPpiList (
+ OUT UINTN *PpiListSize,
+ OUT EFI_PEI_PPI_DESCRIPTOR **PpiList
+ )
+{
+ *PpiListSize = sizeof(gPlatformPpiTable);
+ *PpiList = gPlatformPpiTable;
+}
+
projects / mirror_edk2.git / blobdiff