+++ /dev/null
-/** @file\r
- Serial I/O Port library functions with no library constructor/destructor\r
-\r
-\r
- Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>\r
- \r
- This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
-**/\r
-\r
-#include <Base.h>\r
-#include <Library/SerialPortLib.h>\r
-#include <Library/PcdLib.h>\r
-#include <Library/IoLib.h>\r
-\r
-#include <ArmEb/ArmEb.h>\r
-\r
-/*\r
-\r
- Programmed hardware of Serial port.\r
-\r
- @return Always return EFI_UNSUPPORTED.\r
-\r
-**/\r
-RETURN_STATUS\r
-EFIAPI\r
-SerialPortInitialize (\r
- VOID\r
- )\r
-{\r
- UINT32 Base = PcdGet32 (PcdConsoleUartBase);\r
- \r
- // initialize baud rate generator to 115200 based on EB clock REFCLK24MHZ\r
- MmioWrite32 (Base + UARTIBRD, UART_115200_IDIV);\r
- MmioWrite32 (Base + UARTFBRD, UART_115200_FDIV);\r
-\r
- // no parity, 1 stop, no fifo, 8 data bits\r
- MmioWrite32 (Base + UARTLCR_H, 0x60);\r
-\r
- // clear any pending errors\r
- MmioWrite32 (Base + UARTECR, 0);\r
-\r
- // enable tx, rx, and uart overall\r
- MmioWrite32 (Base + UARTCR, 0x301);\r
-\r
- return RETURN_SUCCESS;\r
-}\r
-\r
-/**\r
- Write data to serial device.\r
-\r
- @param Buffer Point of data buffer which need to be writed.\r
- @param NumberOfBytes Number of output bytes which are cached in Buffer.\r
-\r
- @retval 0 Write data failed.\r
- @retval !0 Actual number of bytes writed to serial device.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-SerialPortWrite (\r
- IN UINT8 *Buffer,\r
- IN UINTN NumberOfBytes\r
-)\r
-{\r
- UINT32 FR = PcdGet32 (PcdConsoleUartBase) + UARTFR;\r
- UINT32 DR = PcdGet32 (PcdConsoleUartBase) + UARTDR;\r
- UINTN Count;\r
- \r
- for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {\r
- while ((MmioRead32 (FR) & UART_TX_EMPTY_FLAG_MASK) == 0);\r
- MmioWrite8 (DR, *Buffer);\r
- }\r
-\r
- return NumberOfBytes;\r
-}\r
-\r
-\r
-/**\r
- Read data from serial device and save the datas in buffer.\r
-\r
- @param Buffer Point of data buffer which need to be writed.\r
- @param NumberOfBytes Number of output bytes which are cached in Buffer.\r
-\r
- @retval 0 Read data failed.\r
- @retval !0 Aactual number of bytes read from serial device.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-SerialPortRead (\r
- OUT UINT8 *Buffer,\r
- IN UINTN NumberOfBytes\r
-)\r
-{\r
- UINT32 FR = PcdGet32 (PcdConsoleUartBase) + UARTFR;\r
- UINT32 DR = PcdGet32 (PcdConsoleUartBase) + UARTDR;\r
- UINTN Count;\r
- \r
- for (Count = 0; Count < NumberOfBytes; Count++, Buffer++) {\r
- while ((MmioRead32 (FR) & UART_RX_EMPTY_FLAG_MASK) != 0);\r
- *Buffer = MmioRead8 (DR);\r
- }\r
-\r
- return NumberOfBytes;\r
-}\r
-\r
-\r
-/**\r
- Check to see if any data is avaiable to be read from the debug device.\r
-\r
- @retval EFI_SUCCESS At least one byte of data is avaiable to be read\r
- @retval EFI_NOT_READY No data is avaiable to be read\r
- @retval EFI_DEVICE_ERROR The serial device is not functioning properly\r
-\r
-**/\r
-BOOLEAN\r
-EFIAPI\r
-SerialPortPoll (\r
- VOID\r
- )\r
-{\r
- UINT32 FR = PcdGet32 (PcdConsoleUartBase) + UARTFR;\r
-\r
- if ((MmioRead32 (FR) & UART_RX_EMPTY_FLAG_MASK) == 0) {\r
- return TRUE;\r
- } else {\r
- return FALSE;\r
- }\r
-}\r
-\r