+++ /dev/null
-/** @file\r
- TimerLib for ARM EB. Hardcoded to 100ns period\r
-\r
- This library assume the following initialization, usually done in SEC. \r
-\r
- // configure SP810 to use 1MHz clock and disable\r
- MmioAndThenOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, ~SP810_SYS_CTRL_TIMER2_EN, SP810_SYS_CTRL_TIMER2_TIMCLK);\r
- // Enable\r
- MmioOr32 (EB_SP810_CTRL_BASE + SP810_SYS_CTRL_REG, SP810_SYS_CTRL_TIMER2_EN);\r
-\r
- // configure timer 2 for one shot operation, 32 bits, no prescaler, and interrupt disabled\r
- MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ONESHOT | SP804_TIMER_CTRL_32BIT | SP804_PRESCALE_DIV_1);\r
-\r
- // preload the timer count register\r
- MmioWrite32 (EB_SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, 1);\r
-\r
- // enable the timer\r
- MmioOr32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CONTROL_REG, SP804_TIMER_CTRL_ENABLE);\r
-\r
-\r
- Copyright (c) 2008 - 2010, Apple Inc. All rights reserved.<BR>\r
- \r
- This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
-**/\r
-\r
-#include <Base.h>\r
-\r
-#include <Library/BaseLib.h>\r
-#include <Library/TimerLib.h>\r
-#include <Library/DebugLib.h>\r
-#include <Library/PcdLib.h>\r
-#include <Library/IoLib.h>\r
-\r
-#include <ArmEb/ArmEb.h>\r
-\r
-\r
-/**\r
- Stalls the CPU for at least the given number of microseconds.\r
-\r
- Stalls the CPU for the number of microseconds specified by MicroSeconds.\r
-\r
- @param MicroSeconds The minimum number of microseconds to delay.\r
-\r
- @return The value of MicroSeconds inputted.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-MicroSecondDelay (\r
- IN UINTN MicroSeconds\r
- )\r
-{\r
- UINT64 NanoSeconds;\r
- \r
- NanoSeconds = MultU64x32 (MicroSeconds, 1000);\r
-\r
- while (NanoSeconds > (UINTN)-1) { \r
- NanoSecondDelay((UINTN)-1);\r
- NanoSeconds -= (UINTN)-1;\r
- }\r
-\r
- NanoSecondDelay (NanoSeconds);\r
-\r
- return MicroSeconds;\r
-}\r
-\r
-/**\r
- Stalls the CPU for at least the given number of nanoseconds.\r
-\r
- Stalls the CPU for the number of nanoseconds specified by NanoSeconds.\r
-\r
- @param NanoSeconds The minimum number of nanoseconds to delay.\r
-\r
- @return The value of NanoSeconds inputted.\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-NanoSecondDelay (\r
- IN UINTN NanoSeconds\r
- )\r
-{\r
- UINT32 TickNumber;\r
-\r
- if (NanoSeconds == 0) {\r
- return NanoSeconds;\r
- }\r
-\r
- // Round up to 100ns Tick Number\r
- TickNumber = (UINT32)NanoSeconds / 100;\r
- TickNumber += ((UINT32)NanoSeconds % 100) == 0 ? 0 : 1;\r
-\r
- // load the timer count register\r
- MmioWrite32 (EB_SP804_TIMER2_BASE + SP804_TIMER_LOAD_REG, TickNumber);\r
-\r
- while (MmioRead32 (EB_SP804_TIMER2_BASE + SP804_TIMER_CURRENT_REG) > 0) {\r
- ;\r
- } \r
- \r
- return NanoSeconds;\r
-}\r
-\r
-/**\r
- Retrieves the current value of a 64-bit free running performance counter.\r
-\r
- The counter can either count up by 1 or count down by 1. If the physical\r
- performance counter counts by a larger increment, then the counter values\r
- must be translated. The properties of the counter can be retrieved from\r
- GetPerformanceCounterProperties().\r
-\r
- @return The current value of the free running performance counter.\r
-\r
-**/\r
-UINT64\r
-EFIAPI\r
-GetPerformanceCounter (\r
- VOID\r
- )\r
-{ \r
- // Free running 64-bit/32-bit counter is needed here.\r
- // Don't think we need this to boot, just to do performance profile\r
- ASSERT (FALSE);\r
- return (UINT64)0ULL;\r
-}\r
-\r
-\r
-/**\r
- Retrieves the 64-bit frequency in Hz and the range of performance counter\r
- values.\r
-\r
- If StartValue is not NULL, then the value that the performance counter starts\r
- with immediately after is it rolls over is returned in StartValue. If\r
- EndValue is not NULL, then the value that the performance counter end with\r
- immediately before it rolls over is returned in EndValue. The 64-bit\r
- frequency of the performance counter in Hz is always returned. If StartValue\r
- is less than EndValue, then the performance counter counts up. If StartValue\r
- is greater than EndValue, then the performance counter counts down. For\r
- example, a 64-bit free running counter that counts up would have a StartValue\r
- of 0 and an EndValue of 0xFFFFFFFFFFFFFFFF. A 24-bit free running counter\r
- that counts down would have a StartValue of 0xFFFFFF and an EndValue of 0.\r
-\r
- @param StartValue The value the performance counter starts with when it\r
- rolls over.\r
- @param EndValue The value that the performance counter ends with before\r
- it rolls over.\r
-\r
- @return The frequency in Hz.\r
-\r
-**/\r
-UINT64\r
-EFIAPI\r
-GetPerformanceCounterProperties (\r
- OUT UINT64 *StartValue, OPTIONAL\r
- OUT UINT64 *EndValue OPTIONAL\r
- )\r
-{\r
- if (StartValue != NULL) {\r
- // Timer starts with the reload value\r
- *StartValue = (UINT64)0ULL;\r
- }\r
- \r
- if (EndValue != NULL) {\r
- // Timer counts up to 0xFFFFFFFF\r
- *EndValue = 0xFFFFFFFF;\r
- }\r
- \r
- return 100;\r
-}\r
-\r
-\r