and there may be bugs in these tools. These tools are under constant development at\r
this time.\r
\r
-3. Tool usage introduction.\r
-BaseTools Simple Usage:\r
-1) Change the directory to the EDK2 root directory, where the edksetup.bat is\r
-2) Run "edksetup.bat NewBuild"\r
-3) Set the ACTIVE_PLATFORM to your desired platform description file \r
- (%WORKSPACE%\Conf\target.txt)\r
-4) To build platform, run "build" command in non-module directory\r
-5) To build module individually, run "build" command in module directory, i.e. where the \r
- *.inf file is\r
-\r
-Notes:\r
-1) The tree structure generated by build tools is similar to Ant build system.\r
-2) Makefile can be called directly by nmake for both top level platform and module. But\r
- after you call "nmake cleanall", you have to call "build" command to rebuild platform\r
- or modules because the AutoGen.* files have been be removed. The "makefile" itself\r
- cannot generate AutoGen.* files. Only "build" command can.\r
-3) All .exe binary file including C and python tools are generated from:\r
- r1911 <buildtools_project>\BaseTools\Source\.\r
-\r
-Brief usage for Migration Tool MigrationMsa2Inf.exe:\r
-1. Command line format:\r
- MigrationMsa2Inf [options]\r
-2. Input Files:\r
- A syntactically valid MSA file\r
-3. Output Files:\r
- An extended INF file with possible auto-generated EntryPoint.c, CommonHeader.h/CommonHeader.txt, depending on options and module contents.\r
-4. Prerequisite:\r
- a. The workspace directory must be specified either by environment variable or -w option. \r
- b. The Framework Database file must exist to specify the available packages in current workspace. \r
- Two possible locations are: (The first location overrides the second)\r
- $(WORKSPACE)\Tools\Conf\FrameworkDatabase.db\r
- $(WORKSPACE)\Conf\FrameworkDatabase.db. \r
- The <PackageList> field in FrameworkDatabase.db lists all available packages in current workspace. \r
- One example:\r
- <PackageList>\r
- <Filename>MdePkg/MdePkg.nspd</Filename>\r
- <Filename>MdeModulePkg/MdeModulePkg.spd</Filename>\r
- <Filename>IntelFrameworkPkg/IntelFrameworkPkg.spd</Filename>\r
- </PackageList>\r
- The package list in FrameworkDatabase.db is important to the final quality of migration:\r
- (1) It suggests the new package location: Translate package dependency Guid in MSA to Workspace relative path. \r
- If the package dependency Guid cannot be found in current workspace a warning message is raised. \r
- (2) It collects the Protocol/Guid/Ppi GuidCName a package contains. \r
- The GuidCName acts as "clue" to add e.g. #include <Protocol/DiskIo.h> in CommonHeader.h\r
- \r
-5. Example:\r
- WORKSAPCE has already been set: $(WORKSPACE) = c:\work\EdkII. \r
- \r
- a. MigrationMsa2Inf -f c:\work\EdkII\Nt32Pkg\WinNtThunkDxe\WinNtThunk.msa -o c:\work\EdkII\Nt32Pkg\WinNtThunkDxe\WinNtThunk.inf\r
- b. MigrationMsa2Inf -f c:\work\EdkII\Nt32Pkg\WinNtThunkDxe\WinNtThunk.msa -a\r
- Example a & b are equivalent to migrate WinNtThunk driver from EDKII to EDKII' code base.\r
- \r
- c. MigrationMsa2Inf -f c:\work\EdkII\Nt32Pkg\WinNtThunkDxe\WinNtThunk.msa -a -c\r
- The extra "-c" option performs several hardcode mapping due to the naming change in EDKII': \r
- OldMdePkg Guid -> MdePkgGuid, \r
- EdkModulePkg Guid -> MdeModulePkgGuid, \r
- EdkGraphicsLib -> GraphicsLib\r
- HiiLib -> HiiLibFramework\r
- ...\r
- \r
- d. MigrationMsa2Inf -f c:\work\EdkII\Nt32Pkg\WinNtThunkDxe\WinNtThunk.msa -m\r
- The extra "-m" option suppresses the generation of "CommonHeader.h" and leave all C files intact. \r
- Instead, it generates "CommonHeader.txt". Developers can manually copy its content to a local common header file in a module. \r
- \r
-6. Known Limitations:\r
- a. Tool does not handle Exit Boot Services Callback & Virtual Address Changed Event. Developers need to handle it manually.\r
- b. The #include <Library/AbcLib.h> is based on library class naming convention: The header filename for "AbcLib" class are "AbcLib.h" by convention.\r
- c. The #include <Guid/Xyz.h>, <Protocol/Xyz.h> and <Ppi/Xyz.h> are added based on gGuidCName listed in MSA. \r
- If a GuidCName cannot map to a package Guid/Protocol/Ppi header file, a warning message is raised.\r
- If a module uses the definition in a pakcage Guid/Protocol/Ppi header file without list its associative GuidCName, the build will beak. Developer needs to manually add the include statement.\r
- d. The [Depex] sections are generated from DXS files with Guid Macro translated to Guid CName by naming convention, etc.\r
- If tool fails to "guess" the Guid CName from Guid Macro, it will leave the GuidMacro in [Depex] section for manual resolution.\r
- e. When tool generates [Sources] section, the modifiers for source files are lost. (Need to add proper tool chain, etc)\r
- f. When tool generates [LibraryClasses] section, the recommended library instances are lost. (No impact to build)\r
- \r
-7. Pyton Source\r
- BaseTools\Source\Python\MigrationMsa2Inf\r
-\r
-Brief usage for Migration Tool Spd2Dec.exe:\r
-1. Command line format:\r
- Spd2Dec [options] input_filename\r
-2. Input File:\r
- A syntactically valid SPD file\r
-3. Output Files:\r
- A DEC file whose syntax confirms to DEC spec.\r
- \r
-4. Example:\r
- a. Spd2Dec -o c:\work\EdkII\Nt32Pkg\Nt32.spd c:\work\EdkII\Nt32Pkg\Nt32.dec\r
- b. Spd2Dec -a c:\work\EdkII\Nt32Pkg\Nt32.spd\r
- Example a & b are equivalent to migrate Nt32 package SPD file from EDKII to EDKII' snytax.\r
- \r
-6. Pyton Source\r
- BaseTools\Source\Python\spd2dec\r
-\r
-Brief usage for Migration Tool Fpd2Dsc.exe:\r
-1. Command line format:\r
- Fpd2Dsc [options] input_filename\r
-2. Input File:\r
- A syntactically valid FPD file\r
-3. Output Files:\r
- A DSC file which syntax confirms to DSC spec.\r
-4. Prerequisite:\r
- a. The workspace directory must be specified either by environment variable or -w option.\r
- \r
-5. Example:\r
- WORKSAPCE has already been set: $(WORKSPACE) = c:\work\EdkII. \r
- \r
- a. Fpd2Dsc -o c:\work\EdkII\Nt32Pkg\Nt32.dsc c:\work\EdkII\Nt32Pkg\Nt32.fpd\r
- b. Fpd2Dsc -a c:\work\EdkII\Nt32Pkg\Nt32.fpd\r
- Example a & b are equivalent to migrate Nt32 platform description file from EDKII to EDKII' snytax.\r
- \r
-6. Known Limitations:\r
- a. Tool does not handle Libraries Section since no related info in original FPD file. Developers need to handle it manually in the output DSC file.\r
- b. If MSA file which is corresponds to module guid could not be found in currect workspace, tool will dump the module guid.\r
- \r
-7. Pyton Source\r
- BaseTools\Source\Python\fpd2dsc\r
-\r
-4-Mar-2010\r
+26-OCT-2011\r
projects / mirror_edk2.git / blobdiff