# build a platform or a module\r
#\r
# Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>\r
-# Copyright (c) 2007 - 2014, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2019, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2018, Hewlett Packard Enterprise Development, L.P.<BR>\r
#\r
-# This program and the accompanying materials\r
-# are licensed and made available under the terms and conditions of the BSD License\r
-# which accompanies this distribution. The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+# SPDX-License-Identifier: BSD-2-Clause-Patent\r
#\r
\r
##\r
# Import Modules\r
#\r
+from __future__ import print_function\r
import Common.LongFilePathOs as os\r
import re\r
-import StringIO\r
import sys\r
import glob\r
import time\r
import platform\r
import traceback\r
import encodings.ascii\r
+import multiprocessing\r
\r
from struct import *\r
from threading import *\r
+import threading\r
from optparse import OptionParser\r
from subprocess import *\r
from Common import Misc as Utils\r
\r
from Common.LongFilePathSupport import OpenLongFilePath as open\r
-from Common.LongFilePathSupport import LongFilePath\r
-from Common.TargetTxtClassObject import *\r
-from Common.ToolDefClassObject import *\r
+from Common.TargetTxtClassObject import TargetTxtClassObject\r
+from Common.ToolDefClassObject import ToolDefClassObject\r
from Common.DataType import *\r
from Common.BuildVersion import gBUILD_VERSION\r
from AutoGen.AutoGen import *\r
from Common.BuildToolError import *\r
-from Workspace.WorkspaceDatabase import *\r
+from Workspace.WorkspaceDatabase import WorkspaceDatabase\r
+from Common.MultipleWorkspace import MultipleWorkspace as mws\r
\r
from BuildReport import BuildReport\r
from GenPatchPcdTable.GenPatchPcdTable import *\r
\r
import Common.EdkLogger\r
import Common.GlobalData as GlobalData\r
+from GenFds.GenFds import GenFds, GenFdsApi\r
+\r
+from collections import OrderedDict, defaultdict\r
\r
# Version and Copyright\r
VersionNumber = "0.60" + ' ' + gBUILD_VERSION\r
__version__ = "%prog Version " + VersionNumber\r
-__copyright__ = "Copyright (c) 2007 - 2014, Intel Corporation All rights reserved."\r
+__copyright__ = "Copyright (c) 2007 - 2018, Intel Corporation All rights reserved."\r
\r
## standard targets of build command\r
gSupportedTarget = ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']\r
# Otherwise, False is returned\r
#\r
def IsToolInPath(tool):\r
- if os.environ.has_key('PATHEXT'):\r
+ if 'PATHEXT' in os.environ:\r
extns = os.environ['PATHEXT'].split(os.path.pathsep)\r
else:\r
extns = ('',)\r
\r
WorkspaceDir = os.path.normcase(os.path.normpath(os.environ["WORKSPACE"]))\r
if not os.path.exists(WorkspaceDir):\r
- EdkLogger.error("build", FILE_NOT_FOUND, "WORKSPACE doesn't exist", ExtraData="%s" % WorkspaceDir)\r
+ EdkLogger.error("build", FILE_NOT_FOUND, "WORKSPACE doesn't exist", ExtraData=WorkspaceDir)\r
elif ' ' in WorkspaceDir:\r
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in WORKSPACE path",\r
ExtraData=WorkspaceDir)\r
os.environ["WORKSPACE"] = WorkspaceDir\r
\r
- #\r
- # Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP\r
- #\r
- if "ECP_SOURCE" not in os.environ:\r
- os.environ["ECP_SOURCE"] = os.path.join(WorkspaceDir, GlobalData.gEdkCompatibilityPkg)\r
- if "EFI_SOURCE" not in os.environ:\r
- os.environ["EFI_SOURCE"] = os.environ["ECP_SOURCE"]\r
- if "EDK_SOURCE" not in os.environ:\r
- os.environ["EDK_SOURCE"] = os.environ["ECP_SOURCE"]\r
+ # set multiple workspace\r
+ PackagesPath = os.getenv("PACKAGES_PATH")\r
+ mws.setWs(WorkspaceDir, PackagesPath)\r
+ if mws.PACKAGES_PATH:\r
+ for Path in mws.PACKAGES_PATH:\r
+ if not os.path.exists(Path):\r
+ EdkLogger.error("build", FILE_NOT_FOUND, "One Path in PACKAGES_PATH doesn't exist", ExtraData=Path)\r
+ elif ' ' in Path:\r
+ EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in PACKAGES_PATH", ExtraData=Path)\r
\r
- #\r
- # Unify case of characters on case-insensitive systems\r
- #\r
- EfiSourceDir = os.path.normcase(os.path.normpath(os.environ["EFI_SOURCE"]))\r
- EdkSourceDir = os.path.normcase(os.path.normpath(os.environ["EDK_SOURCE"]))\r
- EcpSourceDir = os.path.normcase(os.path.normpath(os.environ["ECP_SOURCE"]))\r
\r
- os.environ["EFI_SOURCE"] = EfiSourceDir\r
- os.environ["EDK_SOURCE"] = EdkSourceDir\r
- os.environ["ECP_SOURCE"] = EcpSourceDir\r
os.environ["EDK_TOOLS_PATH"] = os.path.normcase(os.environ["EDK_TOOLS_PATH"])\r
\r
- if not os.path.exists(EcpSourceDir):\r
- EdkLogger.verbose("ECP_SOURCE = %s doesn't exist. Edk modules could not be built." % EcpSourceDir)\r
- elif ' ' in EcpSourceDir:\r
- EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in ECP_SOURCE path",\r
- ExtraData=EcpSourceDir)\r
- if not os.path.exists(EdkSourceDir):\r
- if EdkSourceDir == EcpSourceDir:\r
- EdkLogger.verbose("EDK_SOURCE = %s doesn't exist. Edk modules could not be built." % EdkSourceDir)\r
- else:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE does not exist",\r
- ExtraData=EdkSourceDir)\r
- elif ' ' in EdkSourceDir:\r
- EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in EDK_SOURCE path",\r
- ExtraData=EdkSourceDir)\r
- if not os.path.exists(EfiSourceDir):\r
- if EfiSourceDir == EcpSourceDir:\r
- EdkLogger.verbose("EFI_SOURCE = %s doesn't exist. Edk modules could not be built." % EfiSourceDir)\r
- else:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE does not exist",\r
- ExtraData=EfiSourceDir)\r
- elif ' ' in EfiSourceDir:\r
- EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in EFI_SOURCE path",\r
- ExtraData=EfiSourceDir)\r
-\r
- # change absolute path to relative path to WORKSPACE\r
- if EfiSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir, EfiSourceDir))\r
- if EdkSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir, EdkSourceDir))\r
- if EcpSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "ECP_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir, EcpSourceDir))\r
-\r
# check EDK_TOOLS_PATH\r
if "EDK_TOOLS_PATH" not in os.environ:\r
EdkLogger.error("build", ATTRIBUTE_NOT_AVAILABLE, "Environment variable not found",\r
ExtraData="PATH")\r
\r
GlobalData.gWorkspace = WorkspaceDir\r
- GlobalData.gEfiSource = EfiSourceDir\r
- GlobalData.gEdkSource = EdkSourceDir\r
- GlobalData.gEcpSource = EcpSourceDir\r
\r
GlobalData.gGlobalDefines["WORKSPACE"] = WorkspaceDir\r
- GlobalData.gGlobalDefines["EFI_SOURCE"] = EfiSourceDir\r
- GlobalData.gGlobalDefines["EDK_SOURCE"] = EdkSourceDir\r
- GlobalData.gGlobalDefines["ECP_SOURCE"] = EcpSourceDir\r
GlobalData.gGlobalDefines["EDK_TOOLS_PATH"] = os.environ["EDK_TOOLS_PATH"]\r
\r
## Get normalized file path\r
if os.path.isabs(FilePath):\r
FileFullPath = os.path.normpath(FilePath)\r
else:\r
- FileFullPath = os.path.normpath(os.path.join(Workspace, FilePath))\r
+ FileFullPath = os.path.normpath(mws.join(Workspace, FilePath))\r
+ Workspace = mws.getWs(Workspace, FilePath)\r
\r
# check if the file path exists or not\r
if not os.path.isfile(FileFullPath):\r
- EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)\r
+ EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)\r
\r
# remove workspace directory from the beginning part of the file path\r
if Workspace[-1] in ["\\", "/"]:\r
# read one line a time\r
Line = From.readline()\r
# empty string means "end"\r
- if Line != None and Line != "":\r
- To(Line.rstrip())\r
+ if Line is not None and Line != b"":\r
+ To(Line.rstrip().decode(encoding='utf-8', errors='ignore'))\r
else:\r
break\r
if ExitFlag.isSet():\r
# @param WorkingDir The directory in which the program will be running\r
#\r
def LaunchCommand(Command, WorkingDir):\r
+ BeginTime = time.time()\r
# if working directory doesn't exist, Popen() will raise an exception\r
if not os.path.isdir(WorkingDir):\r
EdkLogger.error("build", FILE_NOT_FOUND, ExtraData=WorkingDir)\r
- \r
+\r
# Command is used as the first Argument in following Popen().\r
# It could be a string or sequence. We find that if command is a string in following Popen(),\r
# ubuntu may fail with an error message that the command is not found.\r
# So here we may need convert command from string to list instance.\r
- if not isinstance(Command, list):\r
- if platform.system() != 'Windows':\r
+ if platform.system() != 'Windows':\r
+ if not isinstance(Command, list):\r
Command = Command.split()\r
+ Command = ' '.join(Command)\r
\r
Proc = None\r
EndOfProcedure = None\r
try:\r
# launch the command\r
- Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1)\r
+ Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1, shell=True)\r
\r
# launch two threads to read the STDOUT and STDERR\r
EndOfProcedure = Event()\r
Proc.wait()\r
except: # in case of aborting\r
# terminate the threads redirecting the program output\r
- if EndOfProcedure != None:\r
+ EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
+ if EndOfProcedure is not None:\r
EndOfProcedure.set()\r
- if Proc == None:\r
- if type(Command) != type(""):\r
+ if Proc is None:\r
+ if not isinstance(Command, type("")):\r
Command = " ".join(Command)\r
EdkLogger.error("build", COMMAND_FAILURE, "Failed to start command", ExtraData="%s [%s]" % (Command, WorkingDir))\r
\r
\r
# check the return code of the program\r
if Proc.returncode != 0:\r
- if type(Command) != type(""):\r
+ if not isinstance(Command, type("")):\r
Command = " ".join(Command)\r
+ # print out the Response file and its content when make failure\r
+ RespFile = os.path.join(WorkingDir, 'OUTPUT', 'respfilelist.txt')\r
+ if os.path.isfile(RespFile):\r
+ f = open(RespFile)\r
+ RespContent = f.read()\r
+ f.close()\r
+ EdkLogger.info(RespContent)\r
+\r
EdkLogger.error("build", COMMAND_FAILURE, ExtraData="%s [%s]" % (Command, WorkingDir))\r
+ return "%dms" % (int(round((time.time() - BeginTime) * 1000)))\r
\r
## The smallest unit that can be built in multi-thread build mode\r
#\r
# @param Other The other BuildUnit object compared to\r
#\r
def __eq__(self, Other):\r
- return Other != None and self.BuildObject == Other.BuildObject \\r
+ return Other and self.BuildObject == Other.BuildObject \\r
+ and Other.BuildObject \\r
and self.BuildObject.Arch == Other.BuildObject.Arch\r
\r
## hash() method\r
#\r
class BuildTask:\r
# queue for tasks waiting for schedule\r
- _PendingQueue = sdict()\r
+ _PendingQueue = OrderedDict()\r
_PendingQueueLock = threading.Lock()\r
\r
# queue for tasks ready for running\r
- _ReadyQueue = sdict()\r
+ _ReadyQueue = OrderedDict()\r
_ReadyQueueLock = threading.Lock()\r
\r
# queue for run tasks\r
- _RunningQueue = sdict()\r
+ _RunningQueue = OrderedDict()\r
_RunningQueueLock = threading.Lock()\r
\r
# queue containing all build tasks, in case duplicate build\r
- _TaskQueue = sdict()\r
+ _TaskQueue = OrderedDict()\r
\r
# flag indicating error occurs in a running thread\r
_ErrorFlag = threading.Event()\r
\r
# get all pending tasks\r
BuildTask._PendingQueueLock.acquire()\r
- BuildObjectList = BuildTask._PendingQueue.keys()\r
+ BuildObjectList = list(BuildTask._PendingQueue.keys())\r
#\r
# check if their dependency is resolved, and if true, move them\r
# into ready queue\r
BuildTask._Thread.acquire(True)\r
\r
# start a new build thread\r
- Bo = BuildTask._ReadyQueue.keys()[0]\r
- Bt = BuildTask._ReadyQueue.pop(Bo)\r
+ Bo, Bt = BuildTask._ReadyQueue.popitem()\r
\r
# move into running queue\r
BuildTask._RunningQueueLock.acquire()\r
# while not BuildTask._ErrorFlag.isSet() and \\r
while len(BuildTask._RunningQueue) > 0:\r
EdkLogger.verbose("Waiting for thread ending...(%d)" % len(BuildTask._RunningQueue))\r
- EdkLogger.debug(EdkLogger.DEBUG_8, "Threads [%s]" % ", ".join([Th.getName() for Th in threading.enumerate()]))\r
+ EdkLogger.debug(EdkLogger.DEBUG_8, "Threads [%s]" % ", ".join(Th.getName() for Th in threading.enumerate()))\r
# avoid tense loop\r
time.sleep(0.1)\r
- except BaseException, X:\r
+ except BaseException as X:\r
#\r
- # TRICK: hide the output of threads left runing, so that the user can\r
+ # TRICK: hide the output of threads left running, so that the user can\r
# catch the error message easily\r
#\r
EdkLogger.SetLevel(EdkLogger.ERROR)\r
self.BuildItem = BuildItem\r
\r
self.DependencyList = []\r
- if Dependency == None:\r
+ if Dependency is None:\r
Dependency = BuildItem.Dependency\r
else:\r
Dependency.extend(BuildItem.Dependency)\r
#\r
def AddDependency(self, Dependency):\r
for Dep in Dependency:\r
- if not Dep.BuildObject.IsBinaryModule:\r
+ if not Dep.BuildObject.IsBinaryModule and not Dep.BuildObject.CanSkipbyHash():\r
self.DependencyList.append(BuildTask.New(Dep)) # BuildTask list\r
\r
## The thread wrapper of LaunchCommand function\r
#\r
def _CommandThread(self, Command, WorkingDir):\r
try:\r
- LaunchCommand(Command, WorkingDir)\r
+ self.BuildItem.BuildObject.BuildTime = LaunchCommand(Command, WorkingDir)\r
self.CompleteFlag = True\r
+\r
+ # Run hash operation post dependency, to account for libs\r
+ if GlobalData.gUseHashCache and self.BuildItem.BuildObject.IsLibrary:\r
+ HashFile = path.join(self.BuildItem.BuildObject.BuildDir, self.BuildItem.BuildObject.Name + ".hash")\r
+ SaveFileOnChange(HashFile, self.BuildItem.BuildObject.GenModuleHash(), True)\r
except:\r
#\r
- # TRICK: hide the output of threads left runing, so that the user can\r
+ # TRICK: hide the output of threads left running, so that the user can\r
# catch the error message easily\r
#\r
if not BuildTask._ErrorFlag.isSet():\r
BuildTask._ErrorFlag.set()\r
BuildTask._ErrorMessage = "%s broken\n %s [%s]" % \\r
(threading.currentThread().getName(), Command, WorkingDir)\r
+ if self.BuildItem.BuildObject in GlobalData.gModuleBuildTracking and not BuildTask._ErrorFlag.isSet():\r
+ GlobalData.gModuleBuildTracking[self.BuildItem.BuildObject] = True\r
# indicate there's a thread is available for another build task\r
BuildTask._RunningQueueLock.acquire()\r
BuildTask._RunningQueue.pop(self.BuildItem)\r
self.OutputDir = OutputDir\r
self.DebugDir = DebugDir\r
self.Image = ImageClass\r
- self.Image.Size = (self.Image.Size / 0x1000 + 1) * 0x1000\r
+ self.Image.Size = (self.Image.Size // 0x1000 + 1) * 0x1000\r
\r
## The class implementing the EDK2 build process\r
#\r
self.SkipAutoGen = BuildOptions.SkipAutoGen\r
self.Reparse = BuildOptions.Reparse\r
self.SkuId = BuildOptions.SkuId\r
+ if self.SkuId:\r
+ GlobalData.gSKUID_CMD = self.SkuId\r
self.ConfDirectory = BuildOptions.ConfDirectory\r
self.SpawnMode = True\r
self.BuildReport = BuildReport(BuildOptions.ReportFile, BuildOptions.ReportType)\r
self.TargetTxt = TargetTxtClassObject()\r
self.ToolDef = ToolDefClassObject()\r
+ self.AutoGenTime = 0\r
+ self.MakeTime = 0\r
+ self.GenFdsTime = 0\r
+ GlobalData.BuildOptionPcd = BuildOptions.OptionPcd if BuildOptions.OptionPcd else []\r
#Set global flag for build mode\r
GlobalData.gIgnoreSource = BuildOptions.IgnoreSources\r
+ GlobalData.gUseHashCache = BuildOptions.UseHashCache\r
+ GlobalData.gBinCacheDest = BuildOptions.BinCacheDest\r
+ GlobalData.gBinCacheSource = BuildOptions.BinCacheSource\r
+ GlobalData.gEnableGenfdsMultiThread = BuildOptions.GenfdsMultiThread\r
+ GlobalData.gDisableIncludePathCheck = BuildOptions.DisableIncludePathCheck\r
+\r
+ if GlobalData.gBinCacheDest and not GlobalData.gUseHashCache:\r
+ EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-destination must be used together with --hash.")\r
+\r
+ if GlobalData.gBinCacheSource and not GlobalData.gUseHashCache:\r
+ EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-source must be used together with --hash.")\r
+\r
+ if GlobalData.gBinCacheDest and GlobalData.gBinCacheSource:\r
+ EdkLogger.error("build", OPTION_NOT_SUPPORTED, ExtraData="--binary-destination can not be used together with --binary-source.")\r
+\r
+ if GlobalData.gBinCacheSource:\r
+ BinCacheSource = os.path.normpath(GlobalData.gBinCacheSource)\r
+ if not os.path.isabs(BinCacheSource):\r
+ BinCacheSource = mws.join(self.WorkspaceDir, BinCacheSource)\r
+ GlobalData.gBinCacheSource = BinCacheSource\r
+ else:\r
+ if GlobalData.gBinCacheSource is not None:\r
+ EdkLogger.error("build", OPTION_VALUE_INVALID, ExtraData="Invalid value of option --binary-source.")\r
+\r
+ if GlobalData.gBinCacheDest:\r
+ BinCacheDest = os.path.normpath(GlobalData.gBinCacheDest)\r
+ if not os.path.isabs(BinCacheDest):\r
+ BinCacheDest = mws.join(self.WorkspaceDir, BinCacheDest)\r
+ GlobalData.gBinCacheDest = BinCacheDest\r
+ else:\r
+ if GlobalData.gBinCacheDest is not None:\r
+ EdkLogger.error("build", OPTION_VALUE_INVALID, ExtraData="Invalid value of option --binary-destination.")\r
\r
if self.ConfDirectory:\r
# Get alternate Conf location, if it is absolute, then just use the absolute directory name\r
if not os.path.isabs(ConfDirectoryPath):\r
# Since alternate directory name is not absolute, the alternate directory is located within the WORKSPACE\r
# This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf\r
- ConfDirectoryPath = os.path.join(self.WorkspaceDir, ConfDirectoryPath)\r
+ ConfDirectoryPath = mws.join(self.WorkspaceDir, ConfDirectoryPath)\r
else:\r
- # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf\r
- ConfDirectoryPath = os.path.join(self.WorkspaceDir, 'Conf')\r
+ if "CONF_PATH" in os.environ:\r
+ ConfDirectoryPath = os.path.normcase(os.path.normpath(os.environ["CONF_PATH"]))\r
+ else:\r
+ # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf\r
+ ConfDirectoryPath = mws.join(self.WorkspaceDir, 'Conf')\r
GlobalData.gConfDirectory = ConfDirectoryPath\r
GlobalData.gDatabasePath = os.path.normpath(os.path.join(ConfDirectoryPath, GlobalData.gDatabasePath))\r
\r
- if BuildOptions.DisableCache:\r
- self.Db = WorkspaceDatabase(":memory:")\r
- else:\r
- self.Db = WorkspaceDatabase(GlobalData.gDatabasePath, self.Reparse)\r
+ self.Db = WorkspaceDatabase()\r
self.BuildDatabase = self.Db.BuildObject\r
self.Platform = None\r
+ self.ToolChainFamily = None\r
self.LoadFixAddress = 0\r
self.UniFlag = BuildOptions.Flag\r
self.BuildModules = []\r
+ self.HashSkipModules = []\r
+ self.Db_Flag = False\r
+ self.LaunchPrebuildFlag = False\r
+ self.PlatformBuildPath = os.path.join(GlobalData.gConfDirectory, '.cache', '.PlatformBuild')\r
+ if BuildOptions.CommandLength:\r
+ GlobalData.gCommandMaxLength = BuildOptions.CommandLength\r
\r
# print dot character during doing some time-consuming work\r
self.Progress = Utils.Progressor()\r
-\r
- self.InitBuild()\r
-\r
# print current build environment and configuration\r
EdkLogger.quiet("%-16s = %s" % ("WORKSPACE", os.environ["WORKSPACE"]))\r
- EdkLogger.quiet("%-16s = %s" % ("ECP_SOURCE", os.environ["ECP_SOURCE"]))\r
- EdkLogger.quiet("%-16s = %s" % ("EDK_SOURCE", os.environ["EDK_SOURCE"]))\r
- EdkLogger.quiet("%-16s = %s" % ("EFI_SOURCE", os.environ["EFI_SOURCE"]))\r
+ if "PACKAGES_PATH" in os.environ:\r
+ # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env.\r
+ EdkLogger.quiet("%-16s = %s" % ("PACKAGES_PATH", os.path.normcase(os.path.normpath(os.environ["PACKAGES_PATH"]))))\r
EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os.environ["EDK_TOOLS_PATH"]))\r
+ if "EDK_TOOLS_BIN" in os.environ:\r
+ # Print the same path style with WORKSPACE env.\r
+ EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os.path.normcase(os.path.normpath(os.environ["EDK_TOOLS_BIN"]))))\r
+ EdkLogger.quiet("%-16s = %s" % ("CONF_PATH", GlobalData.gConfDirectory))\r
+ if "PYTHON3_ENABLE" in os.environ:\r
+ PYTHON3_ENABLE = os.environ["PYTHON3_ENABLE"]\r
+ if PYTHON3_ENABLE != "TRUE":\r
+ PYTHON3_ENABLE = "FALSE"\r
+ EdkLogger.quiet("%-16s = %s" % ("PYTHON3_ENABLE", PYTHON3_ENABLE))\r
+ if "PYTHON_COMMAND" in os.environ:\r
+ EdkLogger.quiet("%-16s = %s" % ("PYTHON_COMMAND", os.environ["PYTHON_COMMAND"]))\r
+ self.InitPreBuild()\r
+ self.InitPostBuild()\r
+ if self.Prebuild:\r
+ EdkLogger.quiet("%-16s = %s" % ("PREBUILD", self.Prebuild))\r
+ if self.Postbuild:\r
+ EdkLogger.quiet("%-16s = %s" % ("POSTBUILD", self.Postbuild))\r
+ if self.Prebuild:\r
+ self.LaunchPrebuild()\r
+ self.TargetTxt = TargetTxtClassObject()\r
+ self.ToolDef = ToolDefClassObject()\r
+ if not (self.LaunchPrebuildFlag and os.path.exists(self.PlatformBuildPath)):\r
+ self.InitBuild()\r
\r
EdkLogger.info("")\r
-\r
os.chdir(self.WorkspaceDir)\r
\r
## Load configuration\r
if os.path.isfile(BuildConfigurationFile) == True:\r
StatusCode = self.TargetTxt.LoadTargetTxtFile(BuildConfigurationFile)\r
\r
- ToolDefinitionFile = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_CONF]\r
+ ToolDefinitionFile = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_CONF]\r
if ToolDefinitionFile == '':\r
ToolDefinitionFile = gToolsDefinition\r
- ToolDefinitionFile = os.path.normpath(os.path.join(self.WorkspaceDir, 'Conf', ToolDefinitionFile))\r
+ ToolDefinitionFile = os.path.normpath(mws.join(self.WorkspaceDir, 'Conf', ToolDefinitionFile))\r
if os.path.isfile(ToolDefinitionFile) == True:\r
StatusCode = self.ToolDef.LoadToolDefFile(ToolDefinitionFile)\r
else:\r
\r
# if no ARCH given in command line, get it from target.txt\r
if not self.ArchList:\r
- self.ArchList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TARGET_ARCH]\r
+ self.ArchList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TARGET_ARCH]\r
self.ArchList = tuple(self.ArchList)\r
\r
# if no build target given in command line, get it from target.txt\r
if not self.BuildTargetList:\r
- self.BuildTargetList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TARGET]\r
+ self.BuildTargetList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TARGET]\r
\r
# if no tool chain given in command line, get it from target.txt\r
if not self.ToolChainList:\r
- self.ToolChainList = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_TOOL_CHAIN_TAG]\r
- if self.ToolChainList == None or len(self.ToolChainList) == 0:\r
+ self.ToolChainList = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_TOOL_CHAIN_TAG]\r
+ if self.ToolChainList is None or len(self.ToolChainList) == 0:\r
EdkLogger.error("build", RESOURCE_NOT_AVAILABLE, ExtraData="No toolchain given. Don't know how to build.\n")\r
\r
# check if the tool chains are defined or not\r
else:\r
self.ToolChainList = NewToolChainList\r
\r
- if self.ThreadNumber == None:\r
- self.ThreadNumber = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER]\r
+ ToolChainFamily = []\r
+ ToolDefinition = self.ToolDef.ToolsDefTxtDatabase\r
+ for Tool in self.ToolChainList:\r
+ if TAB_TOD_DEFINES_FAMILY not in ToolDefinition or Tool not in ToolDefinition[TAB_TOD_DEFINES_FAMILY] \\r
+ or not ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool]:\r
+ EdkLogger.warn("build", "No tool chain family found in configuration for %s. Default to MSFT." % Tool)\r
+ ToolChainFamily.append(TAB_COMPILER_MSFT)\r
+ else:\r
+ ToolChainFamily.append(ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool])\r
+ self.ToolChainFamily = ToolChainFamily\r
+\r
+ if self.ThreadNumber is None:\r
+ self.ThreadNumber = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER]\r
if self.ThreadNumber == '':\r
self.ThreadNumber = 0\r
else:\r
self.ThreadNumber = int(self.ThreadNumber, 0)\r
\r
if self.ThreadNumber == 0:\r
- self.ThreadNumber = 1\r
+ try:\r
+ self.ThreadNumber = multiprocessing.cpu_count()\r
+ except (ImportError, NotImplementedError):\r
+ self.ThreadNumber = 1\r
\r
if not self.PlatformFile:\r
- PlatformFile = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_ACTIVE_PLATFORM]\r
+ PlatformFile = self.TargetTxt.TargetTxtDictionary[TAB_TAT_DEFINES_ACTIVE_PLATFORM]\r
if not PlatformFile:\r
# Try to find one in current directory\r
WorkingDirectory = os.getcwd()\r
if ErrorCode != 0:\r
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r
\r
- # create metafile database\r
- self.Db.InitDatabase()\r
+\r
+ def InitPreBuild(self):\r
+ self.LoadConfiguration()\r
+ ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)\r
+ if ErrorCode != 0:\r
+ EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r
+ if self.BuildTargetList:\r
+ GlobalData.gGlobalDefines['TARGET'] = self.BuildTargetList[0]\r
+ if self.ArchList:\r
+ GlobalData.gGlobalDefines['ARCH'] = self.ArchList[0]\r
+ if self.ToolChainList:\r
+ GlobalData.gGlobalDefines['TOOLCHAIN'] = self.ToolChainList[0]\r
+ GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = self.ToolChainList[0]\r
+ if self.ToolChainFamily:\r
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[0]\r
+ if 'PREBUILD' in GlobalData.gCommandLineDefines:\r
+ self.Prebuild = GlobalData.gCommandLineDefines.get('PREBUILD')\r
+ else:\r
+ self.Db_Flag = True\r
+ Platform = self.Db.MapPlatform(str(self.PlatformFile))\r
+ self.Prebuild = str(Platform.Prebuild)\r
+ if self.Prebuild:\r
+ PrebuildList = []\r
+ #\r
+ # Evaluate all arguments and convert arguments that are WORKSPACE\r
+ # relative paths to absolute paths. Filter arguments that look like\r
+ # flags or do not follow the file/dir naming rules to avoid false\r
+ # positives on this conversion.\r
+ #\r
+ for Arg in self.Prebuild.split():\r
+ #\r
+ # Do not modify Arg if it looks like a flag or an absolute file path\r
+ #\r
+ if Arg.startswith('-') or os.path.isabs(Arg):\r
+ PrebuildList.append(Arg)\r
+ continue\r
+ #\r
+ # Do not modify Arg if it does not look like a Workspace relative\r
+ # path that starts with a valid package directory name\r
+ #\r
+ if not Arg[0].isalpha() or os.path.dirname(Arg) == '':\r
+ PrebuildList.append(Arg)\r
+ continue\r
+ #\r
+ # If Arg looks like a WORKSPACE relative path, then convert to an\r
+ # absolute path and check to see if the file exists.\r
+ #\r
+ Temp = mws.join(self.WorkspaceDir, Arg)\r
+ if os.path.isfile(Temp):\r
+ Arg = Temp\r
+ PrebuildList.append(Arg)\r
+ self.Prebuild = ' '.join(PrebuildList)\r
+ self.Prebuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList, self.PlatformFile, self.Target)\r
+\r
+ def InitPostBuild(self):\r
+ if 'POSTBUILD' in GlobalData.gCommandLineDefines:\r
+ self.Postbuild = GlobalData.gCommandLineDefines.get('POSTBUILD')\r
+ else:\r
+ Platform = self.Db.MapPlatform(str(self.PlatformFile))\r
+ self.Postbuild = str(Platform.Postbuild)\r
+ if self.Postbuild:\r
+ PostbuildList = []\r
+ #\r
+ # Evaluate all arguments and convert arguments that are WORKSPACE\r
+ # relative paths to absolute paths. Filter arguments that look like\r
+ # flags or do not follow the file/dir naming rules to avoid false\r
+ # positives on this conversion.\r
+ #\r
+ for Arg in self.Postbuild.split():\r
+ #\r
+ # Do not modify Arg if it looks like a flag or an absolute file path\r
+ #\r
+ if Arg.startswith('-') or os.path.isabs(Arg):\r
+ PostbuildList.append(Arg)\r
+ continue\r
+ #\r
+ # Do not modify Arg if it does not look like a Workspace relative\r
+ # path that starts with a valid package directory name\r
+ #\r
+ if not Arg[0].isalpha() or os.path.dirname(Arg) == '':\r
+ PostbuildList.append(Arg)\r
+ continue\r
+ #\r
+ # If Arg looks like a WORKSPACE relative path, then convert to an\r
+ # absolute path and check to see if the file exists.\r
+ #\r
+ Temp = mws.join(self.WorkspaceDir, Arg)\r
+ if os.path.isfile(Temp):\r
+ Arg = Temp\r
+ PostbuildList.append(Arg)\r
+ self.Postbuild = ' '.join(PostbuildList)\r
+ self.Postbuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList, self.PlatformFile, self.Target)\r
+\r
+ def PassCommandOption(self, BuildTarget, TargetArch, ToolChain, PlatformFile, Target):\r
+ BuildStr = ''\r
+ if GlobalData.gCommand and isinstance(GlobalData.gCommand, list):\r
+ BuildStr += ' ' + ' '.join(GlobalData.gCommand)\r
+ TargetFlag = False\r
+ ArchFlag = False\r
+ ToolChainFlag = False\r
+ PlatformFileFlag = False\r
+\r
+ if GlobalData.gOptions and not GlobalData.gOptions.BuildTarget:\r
+ TargetFlag = True\r
+ if GlobalData.gOptions and not GlobalData.gOptions.TargetArch:\r
+ ArchFlag = True\r
+ if GlobalData.gOptions and not GlobalData.gOptions.ToolChain:\r
+ ToolChainFlag = True\r
+ if GlobalData.gOptions and not GlobalData.gOptions.PlatformFile:\r
+ PlatformFileFlag = True\r
+\r
+ if TargetFlag and BuildTarget:\r
+ if isinstance(BuildTarget, list) or isinstance(BuildTarget, tuple):\r
+ BuildStr += ' -b ' + ' -b '.join(BuildTarget)\r
+ elif isinstance(BuildTarget, str):\r
+ BuildStr += ' -b ' + BuildTarget\r
+ if ArchFlag and TargetArch:\r
+ if isinstance(TargetArch, list) or isinstance(TargetArch, tuple):\r
+ BuildStr += ' -a ' + ' -a '.join(TargetArch)\r
+ elif isinstance(TargetArch, str):\r
+ BuildStr += ' -a ' + TargetArch\r
+ if ToolChainFlag and ToolChain:\r
+ if isinstance(ToolChain, list) or isinstance(ToolChain, tuple):\r
+ BuildStr += ' -t ' + ' -t '.join(ToolChain)\r
+ elif isinstance(ToolChain, str):\r
+ BuildStr += ' -t ' + ToolChain\r
+ if PlatformFileFlag and PlatformFile:\r
+ if isinstance(PlatformFile, list) or isinstance(PlatformFile, tuple):\r
+ BuildStr += ' -p ' + ' -p '.join(PlatformFile)\r
+ elif isinstance(PlatformFile, str):\r
+ BuildStr += ' -p' + PlatformFile\r
+ BuildStr += ' --conf=' + GlobalData.gConfDirectory\r
+ if Target:\r
+ BuildStr += ' ' + Target\r
+\r
+ return BuildStr\r
+\r
+ def LaunchPrebuild(self):\r
+ if self.Prebuild:\r
+ EdkLogger.info("\n- Prebuild Start -\n")\r
+ self.LaunchPrebuildFlag = True\r
+ #\r
+ # The purpose of .PrebuildEnv file is capture environment variable settings set by the prebuild script\r
+ # and preserve them for the rest of the main build step, because the child process environment will\r
+ # evaporate as soon as it exits, we cannot get it in build step.\r
+ #\r
+ PrebuildEnvFile = os.path.join(GlobalData.gConfDirectory, '.cache', '.PrebuildEnv')\r
+ if os.path.isfile(PrebuildEnvFile):\r
+ os.remove(PrebuildEnvFile)\r
+ if os.path.isfile(self.PlatformBuildPath):\r
+ os.remove(self.PlatformBuildPath)\r
+ if sys.platform == "win32":\r
+ args = ' && '.join((self.Prebuild, 'set > ' + PrebuildEnvFile))\r
+ Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)\r
+ else:\r
+ args = ' && '.join((self.Prebuild, 'env > ' + PrebuildEnvFile))\r
+ Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)\r
+\r
+ # launch two threads to read the STDOUT and STDERR\r
+ EndOfProcedure = Event()\r
+ EndOfProcedure.clear()\r
+ if Process.stdout:\r
+ StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))\r
+ StdOutThread.setName("STDOUT-Redirector")\r
+ StdOutThread.setDaemon(False)\r
+ StdOutThread.start()\r
+\r
+ if Process.stderr:\r
+ StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))\r
+ StdErrThread.setName("STDERR-Redirector")\r
+ StdErrThread.setDaemon(False)\r
+ StdErrThread.start()\r
+ # waiting for program exit\r
+ Process.wait()\r
+\r
+ if Process.stdout:\r
+ StdOutThread.join()\r
+ if Process.stderr:\r
+ StdErrThread.join()\r
+ if Process.returncode != 0 :\r
+ EdkLogger.error("Prebuild", PREBUILD_ERROR, 'Prebuild process is not success!')\r
+\r
+ if os.path.exists(PrebuildEnvFile):\r
+ f = open(PrebuildEnvFile)\r
+ envs = f.readlines()\r
+ f.close()\r
+ envs = [l.split("=", 1) for l in envs ]\r
+ envs = [[I.strip() for I in item] for item in envs if len(item) == 2]\r
+ os.environ.update(dict(envs))\r
+ EdkLogger.info("\n- Prebuild Done -\n")\r
+\r
+ def LaunchPostbuild(self):\r
+ if self.Postbuild:\r
+ EdkLogger.info("\n- Postbuild Start -\n")\r
+ if sys.platform == "win32":\r
+ Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)\r
+ else:\r
+ Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)\r
+ # launch two threads to read the STDOUT and STDERR\r
+ EndOfProcedure = Event()\r
+ EndOfProcedure.clear()\r
+ if Process.stdout:\r
+ StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))\r
+ StdOutThread.setName("STDOUT-Redirector")\r
+ StdOutThread.setDaemon(False)\r
+ StdOutThread.start()\r
+\r
+ if Process.stderr:\r
+ StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))\r
+ StdErrThread.setName("STDERR-Redirector")\r
+ StdErrThread.setDaemon(False)\r
+ StdErrThread.start()\r
+ # waiting for program exit\r
+ Process.wait()\r
+\r
+ if Process.stdout:\r
+ StdOutThread.join()\r
+ if Process.stderr:\r
+ StdErrThread.join()\r
+ if Process.returncode != 0 :\r
+ EdkLogger.error("Postbuild", POSTBUILD_ERROR, 'Postbuild process is not success!')\r
+ EdkLogger.info("\n- Postbuild Done -\n")\r
+\r
+ ## Error handling for hash feature\r
+ #\r
+ # On BuildTask error, iterate through the Module Build tracking\r
+ # dictionary to determine wheather a module failed to build. Invalidate\r
+ # the hash associated with that module by removing it from storage.\r
+ #\r
+ #\r
+ def invalidateHash(self):\r
+ # GlobalData.gModuleBuildTracking contains only modules that cannot be skipped by hash\r
+ for moduleAutoGenObj in GlobalData.gModuleBuildTracking.keys():\r
+ # False == FAIL : True == Success\r
+ # Skip invalidating for Successful module builds\r
+ if GlobalData.gModuleBuildTracking[moduleAutoGenObj] == True:\r
+ continue\r
+\r
+ # The module failed to build or failed to start building, from this point on\r
+\r
+ # Remove .hash from build\r
+ if GlobalData.gUseHashCache:\r
+ ModuleHashFile = path.join(moduleAutoGenObj.BuildDir, moduleAutoGenObj.Name + ".hash")\r
+ if os.path.exists(ModuleHashFile):\r
+ os.remove(ModuleHashFile)\r
+\r
+ # Remove .hash file from cache\r
+ if GlobalData.gBinCacheDest:\r
+ FileDir = path.join(GlobalData.gBinCacheDest, moduleAutoGenObj.Arch, moduleAutoGenObj.SourceDir, moduleAutoGenObj.MetaFile.BaseName)\r
+ HashFile = path.join(FileDir, moduleAutoGenObj.Name + '.hash')\r
+ if os.path.exists(HashFile):\r
+ os.remove(HashFile)\r
\r
## Build a module or platform\r
#\r
# @param CreateDepModuleMakeFile Flag used to indicate creating makefile\r
# for dependent modules/Libraries\r
#\r
- def _BuildPa(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False):\r
- if AutoGenObject == None:\r
+ def _BuildPa(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False, FfsCommand={}):\r
+ if AutoGenObject is None:\r
return False\r
\r
# skip file generation for cleanxxx targets, run and fds target\r
\r
if not self.SkipAutoGen or Target == 'genmake':\r
self.Progress.Start("Generating makefile")\r
- AutoGenObject.CreateMakeFile(CreateDepsMakeFile)\r
+ AutoGenObject.CreateMakeFile(CreateDepsMakeFile, FfsCommand)\r
self.Progress.Stop("done!")\r
if Target == "genmake":\r
return True\r
EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))\r
\r
BuildCommand = AutoGenObject.BuildCommand\r
- if BuildCommand == None or len(BuildCommand) == 0:\r
+ if BuildCommand is None or len(BuildCommand) == 0:\r
EdkLogger.error("build", OPTION_MISSING,\r
"No build command found for this module. "\r
"Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %\r
\r
makefile = GenMake.BuildFile(AutoGenObject)._FILE_NAME_[GenMake.gMakeType]\r
\r
- # genfds\r
- if Target == 'fds':\r
- LaunchCommand(AutoGenObject.GenFdsCommand, AutoGenObject.MakeFileDir)\r
- return True\r
-\r
# run\r
if Target == 'run':\r
RunDir = os.path.normpath(os.path.join(AutoGenObject.BuildDir, GlobalData.gGlobalDefines['ARCH']))\r
try:\r
#os.rmdir(AutoGenObject.BuildDir)\r
RemoveDirectory(AutoGenObject.BuildDir, True)\r
- except WindowsError, X:\r
+ except WindowsError as X:\r
EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))\r
return True\r
\r
# for dependent modules/Libraries\r
#\r
def _Build(self, Target, AutoGenObject, CreateDepsCodeFile=True, CreateDepsMakeFile=True, BuildModule=False):\r
- if AutoGenObject == None:\r
+ if AutoGenObject is None:\r
return False\r
\r
# skip file generation for cleanxxx targets, run and fds target\r
EdkLogger.quiet("Building ... %s" % repr(AutoGenObject))\r
\r
BuildCommand = AutoGenObject.BuildCommand\r
- if BuildCommand == None or len(BuildCommand) == 0:\r
+ if BuildCommand is None or len(BuildCommand) == 0:\r
EdkLogger.error("build", OPTION_MISSING,\r
"No build command found for this module. "\r
"Please check your setting of %s_%s_%s_MAKE_PATH in Conf/tools_def.txt file." %\r
(AutoGenObject.BuildTarget, AutoGenObject.ToolChain, AutoGenObject.Arch),\r
ExtraData=str(AutoGenObject))\r
\r
+ # build modules\r
+ if BuildModule:\r
+ if Target != 'fds':\r
+ BuildCommand = BuildCommand + [Target]\r
+ AutoGenObject.BuildTime = LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)\r
+ self.CreateAsBuiltInf()\r
+ return True\r
+\r
# genfds\r
if Target == 'fds':\r
- LaunchCommand(AutoGenObject.GenFdsCommand, AutoGenObject.MakeFileDir)\r
+ if GenFdsApi(AutoGenObject.GenFdsCommandDict, self.Db):\r
+ EdkLogger.error("build", COMMAND_FAILURE)\r
return True\r
\r
# run\r
LaunchCommand(Command, RunDir)\r
return True\r
\r
- # build modules\r
- BuildCommand = BuildCommand + [Target]\r
- if BuildModule:\r
- LaunchCommand(BuildCommand, AutoGenObject.MakeFileDir)\r
- self.CreateAsBuiltInf()\r
- return True\r
-\r
# build library\r
if Target == 'libraries':\r
pass\r
try:\r
#os.rmdir(AutoGenObject.BuildDir)\r
RemoveDirectory(AutoGenObject.BuildDir, True)\r
- except WindowsError, X:\r
+ except WindowsError as X:\r
EdkLogger.error("build", FILE_DELETE_FAILURE, ExtraData=str(X))\r
return True\r
\r
def _RebaseModule (self, MapBuffer, BaseAddress, ModuleList, AddrIsOffset = True, ModeIsSmm = False):\r
if ModeIsSmm:\r
AddrIsOffset = False\r
- InfFileNameList = ModuleList.keys()\r
- #InfFileNameList.sort()\r
- for InfFile in InfFileNameList:\r
+ for InfFile in ModuleList:\r
sys.stdout.write (".")\r
sys.stdout.flush()\r
ModuleInfo = ModuleList[InfFile]\r
# Update Image to new BaseAddress by GenFw tool\r
#\r
LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r
- LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
+ LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
else:\r
#\r
# Set new address to the section header only for SMM driver.\r
#\r
LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r
- LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
+ LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
#\r
- # Collect funtion address from Map file\r
+ # Collect function address from Map file\r
#\r
ImageMapTable = ModuleOutputImage.replace('.efi', '.map')\r
FunctionList = []\r
if os.path.exists(ImageMapTable):\r
OrigImageBaseAddress = 0\r
- ImageMap = open (ImageMapTable, 'r')\r
+ ImageMap = open(ImageMapTable, 'r')\r
for LinStr in ImageMap:\r
if len (LinStr.strip()) == 0:\r
continue\r
\r
StrList = LinStr.split()\r
if len (StrList) > 4:\r
- if StrList[3] == 'f' or StrList[3] =='F':\r
+ if StrList[3] == 'f' or StrList[3] == 'F':\r
Name = StrList[1]\r
RelativeAddress = int (StrList[2], 16) - OrigImageBaseAddress\r
FunctionList.append ((Name, RelativeAddress))\r
- if ModuleInfo.Arch == 'IPF' and Name.endswith('_ModuleEntryPoint'):\r
- #\r
- # Get the real entry point address for IPF image.\r
- #\r
- ModuleInfo.Image.EntryPoint = RelativeAddress\r
+\r
ImageMap.close()\r
#\r
# Add general information.\r
#\r
if ModeIsSmm:\r
- MapBuffer.write('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r
+ MapBuffer.append('\n\n%s (Fixed SMRAM Offset, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r
elif AddrIsOffset:\r
- MapBuffer.write('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName, 0 - BaseAddress, 0 - (BaseAddress + ModuleInfo.Image.EntryPoint)))\r
+ MapBuffer.append('\n\n%s (Fixed Memory Offset, BaseAddress=-0x%010X, EntryPoint=-0x%010X)\n' % (ModuleName, 0 - BaseAddress, 0 - (BaseAddress + ModuleInfo.Image.EntryPoint)))\r
else:\r
- MapBuffer.write('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r
+ MapBuffer.append('\n\n%s (Fixed Memory Address, BaseAddress=0x%010X, EntryPoint=0x%010X)\n' % (ModuleName, BaseAddress, BaseAddress + ModuleInfo.Image.EntryPoint))\r
#\r
# Add guid and general seciton section.\r
#\r
elif SectionHeader[0] in ['.data', '.sdata']:\r
DataSectionAddress = SectionHeader[1]\r
if AddrIsOffset:\r
- MapBuffer.write('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))\r
+ MapBuffer.append('(GUID=%s, .textbaseaddress=-0x%010X, .databaseaddress=-0x%010X)\n' % (ModuleInfo.Guid, 0 - (BaseAddress + TextSectionAddress), 0 - (BaseAddress + DataSectionAddress)))\r
else:\r
- MapBuffer.write('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))\r
+ MapBuffer.append('(GUID=%s, .textbaseaddress=0x%010X, .databaseaddress=0x%010X)\n' % (ModuleInfo.Guid, BaseAddress + TextSectionAddress, BaseAddress + DataSectionAddress))\r
#\r
# Add debug image full path.\r
#\r
- MapBuffer.write('(IMAGE=%s)\n\n' % (ModuleDebugImage))\r
+ MapBuffer.append('(IMAGE=%s)\n\n' % (ModuleDebugImage))\r
#\r
- # Add funtion address\r
+ # Add function address\r
#\r
for Function in FunctionList:\r
if AddrIsOffset:\r
- MapBuffer.write(' -0x%010X %s\n' % (0 - (BaseAddress + Function[1]), Function[0]))\r
+ MapBuffer.append(' -0x%010X %s\n' % (0 - (BaseAddress + Function[1]), Function[0]))\r
else:\r
- MapBuffer.write(' 0x%010X %s\n' % (BaseAddress + Function[1], Function[0]))\r
+ MapBuffer.append(' 0x%010X %s\n' % (BaseAddress + Function[1], Function[0]))\r
ImageMap.close()\r
\r
#\r
# First get the XIP base address for FV map file.\r
GuidPattern = re.compile("[-a-fA-F0-9]+")\r
GuidName = re.compile("\(GUID=[-a-fA-F0-9]+")\r
- for FvName in Wa.FdfProfile.FvDict.keys():\r
+ for FvName in Wa.FdfProfile.FvDict:\r
FvMapBuffer = os.path.join(Wa.FvDir, FvName + '.Fv.map')\r
if not os.path.exists(FvMapBuffer):\r
continue\r
FvMap.readline()\r
for Line in FvMap:\r
MatchGuid = GuidPattern.match(Line)\r
- if MatchGuid != None:\r
+ if MatchGuid is not None:\r
#\r
# Replace GUID with module name\r
#\r
GuidString = MatchGuid.group()\r
if GuidString.upper() in ModuleList:\r
Line = Line.replace(GuidString, ModuleList[GuidString.upper()].Name)\r
- MapBuffer.write('%s' % (Line))\r
+ MapBuffer.append(Line)\r
#\r
# Add the debug image full path.\r
#\r
MatchGuid = GuidName.match(Line)\r
- if MatchGuid != None:\r
+ if MatchGuid is not None:\r
GuidString = MatchGuid.group().split("=")[1]\r
if GuidString.upper() in ModuleList:\r
- MapBuffer.write('(IMAGE=%s)\n' % (os.path.join(ModuleList[GuidString.upper()].DebugDir, ModuleList[GuidString.upper()].Name + '.efi')))\r
+ MapBuffer.append('(IMAGE=%s)\n' % (os.path.join(ModuleList[GuidString.upper()].DebugDir, ModuleList[GuidString.upper()].Name + '.efi')))\r
\r
FvMap.close()\r
\r
RtSize = 0\r
# reserve 4K size in SMRAM to make SMM module address not from 0.\r
SmmSize = 0x1000\r
- IsIpfPlatform = False\r
- if 'IPF' in self.ArchList:\r
- IsIpfPlatform = True\r
for ModuleGuid in ModuleList:\r
Module = ModuleList[ModuleGuid]\r
GlobalData.gProcessingFile = "%s [%s, %s, %s]" % (Module.MetaFile, Module.Arch, Module.ToolChain, Module.BuildTarget)\r
if not ImageClass.IsValid:\r
EdkLogger.error("build", FILE_PARSE_FAILURE, ExtraData=ImageClass.ErrorInfo)\r
ImageInfo = PeImageInfo(Module.Name, Module.Guid, Module.Arch, Module.OutputDir, Module.DebugDir, ImageClass)\r
- if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:\r
+ if Module.ModuleType in [SUP_MODULE_PEI_CORE, SUP_MODULE_PEIM, EDK_COMPONENT_TYPE_COMBINED_PEIM_DRIVER, EDK_COMPONENT_TYPE_PIC_PEIM, EDK_COMPONENT_TYPE_RELOCATABLE_PEIM, SUP_MODULE_DXE_CORE]:\r
PeiModuleList[Module.MetaFile] = ImageInfo\r
PeiSize += ImageInfo.Image.Size\r
- elif Module.ModuleType in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:\r
+ elif Module.ModuleType in [EDK_COMPONENT_TYPE_BS_DRIVER, SUP_MODULE_DXE_DRIVER, SUP_MODULE_UEFI_DRIVER]:\r
BtModuleList[Module.MetaFile] = ImageInfo\r
BtSize += ImageInfo.Image.Size\r
- elif Module.ModuleType in ['DXE_RUNTIME_DRIVER', 'RT_DRIVER', 'DXE_SAL_DRIVER', 'SAL_RT_DRIVER']:\r
+ elif Module.ModuleType in [SUP_MODULE_DXE_RUNTIME_DRIVER, EDK_COMPONENT_TYPE_RT_DRIVER, SUP_MODULE_DXE_SAL_DRIVER, EDK_COMPONENT_TYPE_SAL_RT_DRIVER]:\r
RtModuleList[Module.MetaFile] = ImageInfo\r
- #IPF runtime driver needs to be at 2 page alignment.\r
- if IsIpfPlatform and ImageInfo.Image.Size % 0x2000 != 0:\r
- ImageInfo.Image.Size = (ImageInfo.Image.Size / 0x2000 + 1) * 0x2000\r
RtSize += ImageInfo.Image.Size\r
- elif Module.ModuleType in ['SMM_CORE', 'DXE_SMM_DRIVER']:\r
+ elif Module.ModuleType in [SUP_MODULE_SMM_CORE, SUP_MODULE_DXE_SMM_DRIVER, SUP_MODULE_MM_STANDALONE, SUP_MODULE_MM_CORE_STANDALONE]:\r
SmmModuleList[Module.MetaFile] = ImageInfo\r
SmmSize += ImageInfo.Image.Size\r
- if Module.ModuleType == 'DXE_SMM_DRIVER':\r
- PiSpecVersion = '0x00000000'\r
- if 'PI_SPECIFICATION_VERSION' in Module.Module.Specification:\r
- PiSpecVersion = Module.Module.Specification['PI_SPECIFICATION_VERSION']\r
+ if Module.ModuleType == SUP_MODULE_DXE_SMM_DRIVER:\r
+ PiSpecVersion = Module.Module.Specification.get('PI_SPECIFICATION_VERSION', '0x00000000')\r
# for PI specification < PI1.1, DXE_SMM_DRIVER also runs as BOOT time driver.\r
if int(PiSpecVersion, 16) < 0x0001000A:\r
BtModuleList[Module.MetaFile] = ImageInfo\r
if OutputImageFile != '':\r
ModuleIsPatch = False\r
for Pcd in Module.ModulePcdList:\r
- if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST:\r
+ if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SET:\r
ModuleIsPatch = True\r
break\r
if not ModuleIsPatch:\r
for Pcd in Module.LibraryPcdList:\r
- if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_LIST:\r
+ if Pcd.Type == TAB_PCDS_PATCHABLE_IN_MODULE and Pcd.TokenCName in TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SET:\r
ModuleIsPatch = True\r
break\r
\r
TopMemoryAddress = self.LoadFixAddress\r
if TopMemoryAddress < RtSize + BtSize + PeiSize:\r
EdkLogger.error("build", PARAMETER_INVALID, "FIX_LOAD_TOP_MEMORY_ADDRESS is too low to load driver")\r
- # Make IPF runtime driver at 2 page alignment.\r
- if IsIpfPlatform:\r
- ReservedRuntimeMemorySize = TopMemoryAddress % 0x2000\r
- RtSize = RtSize + ReservedRuntimeMemorySize\r
\r
#\r
# Patch FixAddress related PCDs into EFI image\r
for PcdInfo in PcdTable:\r
ReturnValue = 0\r
if PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize // 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize // 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize // 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE and len (SmmModuleList) > 0:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize // 0x1000))\r
if ReturnValue != 0:\r
EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)\r
\r
- MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize/0x1000))\r
- MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize/0x1000))\r
- MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize/0x1000))\r
+ MapBuffer.append('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize // 0x1000))\r
+ MapBuffer.append('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize // 0x1000))\r
+ MapBuffer.append('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize // 0x1000))\r
if len (SmmModuleList) > 0:\r
- MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize/0x1000))\r
+ MapBuffer.append('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize // 0x1000))\r
\r
PeiBaseAddr = TopMemoryAddress - RtSize - BtSize\r
BtBaseAddr = TopMemoryAddress - RtSize\r
self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)\r
self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)\r
self._RebaseModule (MapBuffer, RtBaseAddr, RtModuleList, TopMemoryAddress == 0)\r
- self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset = False, ModeIsSmm = True)\r
- MapBuffer.write('\n\n')\r
+ self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset=False, ModeIsSmm=True)\r
+ MapBuffer.append('\n\n')\r
sys.stdout.write ("\n")\r
sys.stdout.flush()\r
\r
#\r
# Save address map into MAP file.\r
#\r
- SaveFileOnChange(MapFilePath, MapBuffer.getvalue(), False)\r
- MapBuffer.close()\r
+ SaveFileOnChange(MapFilePath, ''.join(MapBuffer), False)\r
if self.LoadFixAddress != 0:\r
- sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))\r
+ sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath))\r
sys.stdout.flush()\r
\r
## Build active platform for different build targets and different tool chains\r
#\r
def _BuildPlatform(self):\r
+ SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)\r
for BuildTarget in self.BuildTargetList:\r
GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r
+ index = 0\r
for ToolChain in self.ToolChainList:\r
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r
+ index += 1\r
Wa = WorkspaceAutoGen(\r
self.WorkspaceDir,\r
self.PlatformFile,\r
self.LoadFixAddress = Wa.Platform.LoadFixAddress\r
self.BuildReport.AddPlatformReport(Wa)\r
self.Progress.Stop("done!")\r
+\r
+ # Add ffs build to makefile\r
+ CmdListDict = {}\r
+ if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r
+ CmdListDict = self._GenFfsCmd(Wa.ArchList)\r
+\r
for Arch in Wa.ArchList:\r
GlobalData.gGlobalDefines['ARCH'] = Arch\r
Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r
for Module in Pa.Platform.Modules:\r
# Get ModuleAutoGen object to generate C code file and makefile\r
Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r
- if Ma == None:\r
+ if Ma is None:\r
continue\r
self.BuildModules.append(Ma)\r
- self._BuildPa(self.Target, Pa)\r
+ self._BuildPa(self.Target, Pa, FfsCommand=CmdListDict)\r
\r
# Create MAP file when Load Fix Address is enabled.\r
if self.Target in ["", "all", "fds"]:\r
ModuleList = {}\r
for Pa in Wa.AutoGenObjectList:\r
for Ma in Pa.ModuleAutoGenList:\r
- if Ma == None:\r
+ if Ma is None:\r
continue\r
if not Ma.IsLibrary:\r
ModuleList[Ma.Guid.upper()] = Ma\r
\r
- MapBuffer = StringIO('')\r
+ MapBuffer = []\r
if self.LoadFixAddress != 0:\r
#\r
# Rebase module to the preferred memory address before GenFds\r
#\r
self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r
- if self.Fdf:\r
- #\r
- # create FDS again for the updated EFI image\r
- #\r
- self._Build("fds", Wa)\r
if self.Fdf:\r
+ #\r
+ # create FDS again for the updated EFI image\r
+ #\r
+ self._Build("fds", Wa)\r
#\r
# Create MAP file for all platform FVs after GenFds.\r
#\r
def _BuildModule(self):\r
for BuildTarget in self.BuildTargetList:\r
GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r
+ index = 0\r
for ToolChain in self.ToolChainList:\r
+ WorkspaceAutoGenTime = time.time()\r
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r
+ index += 1\r
#\r
# module build needs platform build information, so get platform\r
# AutoGen first\r
self.Fdf = Wa.FdfFile\r
self.LoadFixAddress = Wa.Platform.LoadFixAddress\r
Wa.CreateMakeFile(False)\r
+ # Add ffs build to makefile\r
+ CmdListDict = None\r
+ if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r
+ CmdListDict = self._GenFfsCmd(Wa.ArchList)\r
self.Progress.Stop("done!")\r
MaList = []\r
+ ExitFlag = threading.Event()\r
+ ExitFlag.clear()\r
+ self.AutoGenTime += int(round((time.time() - WorkspaceAutoGenTime)))\r
for Arch in Wa.ArchList:\r
+ AutoGenStart = time.time()\r
GlobalData.gGlobalDefines['ARCH'] = Arch\r
- Ma = ModuleAutoGen(Wa, self.ModuleFile, BuildTarget, ToolChain, Arch, self.PlatformFile)\r
- if Ma == None: continue\r
- MaList.append(Ma)\r
- self.BuildModules.append(Ma)\r
- if not Ma.IsBinaryModule:\r
- self._Build(self.Target, Ma, BuildModule=True)\r
+ Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r
+ for Module in Pa.Platform.Modules:\r
+ if self.ModuleFile.Dir == Module.Dir and self.ModuleFile.Name == Module.Name:\r
+ Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r
+ if Ma is None:\r
+ continue\r
+ MaList.append(Ma)\r
+ if Ma.CanSkipbyHash():\r
+ self.HashSkipModules.append(Ma)\r
+ continue\r
+ # Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'\r
+ if self.Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r
+ # for target which must generate AutoGen code and makefile\r
+ if not self.SkipAutoGen or self.Target == 'genc':\r
+ self.Progress.Start("Generating code")\r
+ Ma.CreateCodeFile(True)\r
+ self.Progress.Stop("done!")\r
+ if self.Target == "genc":\r
+ return True\r
+ if not self.SkipAutoGen or self.Target == 'genmake':\r
+ self.Progress.Start("Generating makefile")\r
+ if CmdListDict and self.Fdf and (Module.File, Arch) in CmdListDict:\r
+ Ma.CreateMakeFile(True, CmdListDict[Module.File, Arch])\r
+ del CmdListDict[Module.File, Arch]\r
+ else:\r
+ Ma.CreateMakeFile(True)\r
+ self.Progress.Stop("done!")\r
+ if self.Target == "genmake":\r
+ return True\r
+ self.BuildModules.append(Ma)\r
+ # Initialize all modules in tracking to False (FAIL)\r
+ if Ma not in GlobalData.gModuleBuildTracking:\r
+ GlobalData.gModuleBuildTracking[Ma] = False\r
+ self.AutoGenTime += int(round((time.time() - AutoGenStart)))\r
+ MakeStart = time.time()\r
+ for Ma in self.BuildModules:\r
+ if not Ma.IsBinaryModule:\r
+ Bt = BuildTask.New(ModuleMakeUnit(Ma, self.Target))\r
+ # Break build if any build thread has error\r
+ if BuildTask.HasError():\r
+ # we need a full version of makefile for platform\r
+ ExitFlag.set()\r
+ BuildTask.WaitForComplete()\r
+ self.invalidateHash()\r
+ Pa.CreateMakeFile(False)\r
+ EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
+ # Start task scheduler\r
+ if not BuildTask.IsOnGoing():\r
+ BuildTask.StartScheduler(self.ThreadNumber, ExitFlag)\r
+\r
+ # in case there's an interruption. we need a full version of makefile for platform\r
+ Pa.CreateMakeFile(False)\r
+ if BuildTask.HasError():\r
+ self.invalidateHash()\r
+ EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
+ self.MakeTime += int(round((time.time() - MakeStart)))\r
+\r
+ MakeContiue = time.time()\r
+ ExitFlag.set()\r
+ BuildTask.WaitForComplete()\r
+ self.CreateAsBuiltInf()\r
+ self.MakeTime += int(round((time.time() - MakeContiue)))\r
+ if BuildTask.HasError():\r
+ self.invalidateHash()\r
+ EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
\r
self.BuildReport.AddPlatformReport(Wa, MaList)\r
if MaList == []:\r
BUILD_ERROR,\r
"Module for [%s] is not a component of active platform."\\r
" Please make sure that the ARCH and inf file path are"\\r
- " given in the same as in [%s]" %\\r
+ " given in the same as in [%s]" % \\r
(', '.join(Wa.ArchList), self.PlatformFile),\r
ExtraData=self.ModuleFile\r
)\r
ModuleList = {}\r
for Pa in Wa.AutoGenObjectList:\r
for Ma in Pa.ModuleAutoGenList:\r
- if Ma == None:\r
+ if Ma is None:\r
continue\r
if not Ma.IsLibrary:\r
ModuleList[Ma.Guid.upper()] = Ma\r
\r
- MapBuffer = StringIO('')\r
+ MapBuffer = []\r
if self.LoadFixAddress != 0:\r
#\r
# Rebase module to the preferred memory address before GenFds\r
#\r
self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r
- #\r
- # create FDS again for the updated EFI image\r
- #\r
- self._Build("fds", Wa)\r
+ #\r
+ # create FDS again for the updated EFI image\r
+ #\r
+ GenFdsStart = time.time()\r
+ self._Build("fds", Wa)\r
+ self.GenFdsTime += int(round((time.time() - GenFdsStart)))\r
#\r
# Create MAP file for all platform FVs after GenFds.\r
#\r
#\r
self._SaveMapFile (MapBuffer, Wa)\r
\r
+ def _GenFfsCmd(self,ArchList):\r
+ # convert dictionary of Cmd:(Inf,Arch)\r
+ # to a new dictionary of (Inf,Arch):Cmd,Cmd,Cmd...\r
+ CmdSetDict = defaultdict(set)\r
+ GenFfsDict = GenFds.GenFfsMakefile('', GlobalData.gFdfParser, self, ArchList, GlobalData)\r
+ for Cmd in GenFfsDict:\r
+ tmpInf, tmpArch = GenFfsDict[Cmd]\r
+ CmdSetDict[tmpInf, tmpArch].add(Cmd)\r
+ return CmdSetDict\r
+\r
## Build a platform in multi-thread mode\r
#\r
def _MultiThreadBuildPlatform(self):\r
+ SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)\r
for BuildTarget in self.BuildTargetList:\r
GlobalData.gGlobalDefines['TARGET'] = BuildTarget\r
+ index = 0\r
for ToolChain in self.ToolChainList:\r
+ WorkspaceAutoGenTime = time.time()\r
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain\r
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain\r
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]\r
+ index += 1\r
Wa = WorkspaceAutoGen(\r
self.WorkspaceDir,\r
self.PlatformFile,\r
self.BuildReport.AddPlatformReport(Wa)\r
Wa.CreateMakeFile(False)\r
\r
+ # Add ffs build to makefile\r
+ CmdListDict = None\r
+ if GlobalData.gEnableGenfdsMultiThread and self.Fdf:\r
+ CmdListDict = self._GenFfsCmd(Wa.ArchList)\r
+\r
# multi-thread exit flag\r
ExitFlag = threading.Event()\r
ExitFlag.clear()\r
+ self.AutoGenTime += int(round((time.time() - WorkspaceAutoGenTime)))\r
for Arch in Wa.ArchList:\r
+ AutoGenStart = time.time()\r
GlobalData.gGlobalDefines['ARCH'] = Arch\r
Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)\r
- if Pa == None:\r
+ if Pa is None:\r
continue\r
ModuleList = []\r
for Inf in Pa.Platform.Modules:\r
ModuleList.append(Inf)\r
# Add the INF only list in FDF\r
- if GlobalData.gFdfParser != None:\r
+ if GlobalData.gFdfParser is not None:\r
for InfName in GlobalData.gFdfParser.Profile.InfList:\r
Inf = PathClass(NormPath(InfName), self.WorkspaceDir, Arch)\r
if Inf in Pa.Platform.Modules:\r
for Module in ModuleList:\r
# Get ModuleAutoGen object to generate C code file and makefile\r
Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)\r
- \r
- if Ma == None:\r
+\r
+ if Ma is None:\r
continue\r
+ if Ma.CanSkipbyHash():\r
+ self.HashSkipModules.append(Ma)\r
+ continue\r
+\r
# Not to auto-gen for targets 'clean', 'cleanlib', 'cleanall', 'run', 'fds'\r
if self.Target not in ['clean', 'cleanlib', 'cleanall', 'run', 'fds']:\r
# for target which must generate AutoGen code and makefile\r
continue\r
\r
if not self.SkipAutoGen or self.Target == 'genmake':\r
- Ma.CreateMakeFile(True)\r
+ if CmdListDict and self.Fdf and (Module.File, Arch) in CmdListDict:\r
+ Ma.CreateMakeFile(True, CmdListDict[Module.File, Arch])\r
+ del CmdListDict[Module.File, Arch]\r
+ else:\r
+ Ma.CreateMakeFile(True)\r
if self.Target == "genmake":\r
continue\r
self.BuildModules.append(Ma)\r
+ # Initialize all modules in tracking to False (FAIL)\r
+ if Ma not in GlobalData.gModuleBuildTracking:\r
+ GlobalData.gModuleBuildTracking[Ma] = False\r
self.Progress.Stop("done!")\r
-\r
+ self.AutoGenTime += int(round((time.time() - AutoGenStart)))\r
+ MakeStart = time.time()\r
for Ma in self.BuildModules:\r
# Generate build task for the module\r
if not Ma.IsBinaryModule:\r
# we need a full version of makefile for platform\r
ExitFlag.set()\r
BuildTask.WaitForComplete()\r
+ self.invalidateHash()\r
Pa.CreateMakeFile(False)\r
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
# Start task scheduler\r
# in case there's an interruption. we need a full version of makefile for platform\r
Pa.CreateMakeFile(False)\r
if BuildTask.HasError():\r
+ self.invalidateHash()\r
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
+ self.MakeTime += int(round((time.time() - MakeStart)))\r
+\r
+ MakeContiue = time.time()\r
\r
- #\r
- # Save temp tables to a TmpTableDict.\r
- #\r
- for Key in Wa.BuildDatabase._CACHE_:\r
- if Wa.BuildDatabase._CACHE_[Key]._RawData and Wa.BuildDatabase._CACHE_[Key]._RawData._Table and Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table:\r
- if TemporaryTablePattern.match(Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table):\r
- TmpTableDict[Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Table] = Wa.BuildDatabase._CACHE_[Key]._RawData._Table.Cur\r
#\r
#\r
# All modules have been put in build tasks queue. Tell task scheduler\r
ExitFlag.set()\r
BuildTask.WaitForComplete()\r
self.CreateAsBuiltInf()\r
-\r
+ self.MakeTime += int(round((time.time() - MakeContiue)))\r
#\r
# Check for build error, and raise exception if one\r
# has been signaled.\r
#\r
if BuildTask.HasError():\r
+ self.invalidateHash()\r
EdkLogger.error("build", BUILD_ERROR, "Failed to build module", ExtraData=GlobalData.gBuildingModule)\r
\r
# Create MAP file when Load Fix Address is enabled.\r
ModuleList = {}\r
for Pa in Wa.AutoGenObjectList:\r
for Ma in Pa.ModuleAutoGenList:\r
- if Ma == None:\r
+ if Ma is None:\r
continue\r
if not Ma.IsLibrary:\r
ModuleList[Ma.Guid.upper()] = Ma\r
#\r
# Rebase module to the preferred memory address before GenFds\r
#\r
- MapBuffer = StringIO('')\r
+ MapBuffer = []\r
if self.LoadFixAddress != 0:\r
self._CollectModuleMapBuffer(MapBuffer, ModuleList)\r
\r
#\r
# Generate FD image if there's a FDF file found\r
#\r
- LaunchCommand(Wa.GenFdsCommand, os.getcwd())\r
+ GenFdsStart = time.time()\r
+ if GenFdsApi(Wa.GenFdsCommandDict, self.Db):\r
+ EdkLogger.error("build", COMMAND_FAILURE)\r
\r
#\r
# Create MAP file for all platform FVs after GenFds.\r
#\r
self._CollectFvMapBuffer(MapBuffer, Wa, ModuleList)\r
+ self.GenFdsTime += int(round((time.time() - GenFdsStart)))\r
#\r
# Save MAP buffer into MAP file.\r
#\r
\r
# Look through the tool definitions for GUIDed tools\r
guidAttribs = []\r
- for (attrib, value) in self.ToolDef.ToolsDefTxtDictionary.iteritems():\r
+ for (attrib, value) in self.ToolDef.ToolsDefTxtDictionary.items():\r
if attrib.upper().endswith('_GUID'):\r
split = attrib.split('_')\r
thisPrefix = '_'.join(split[0:3]) + '_'\r
toolsFile = os.path.join(FvDir, 'GuidedSectionTools.txt')\r
toolsFile = open(toolsFile, 'wt')\r
for guidedSectionTool in guidAttribs:\r
- print >> toolsFile, ' '.join(guidedSectionTool)\r
+ print(' '.join(guidedSectionTool), file=toolsFile)\r
toolsFile.close()\r
\r
## Returns the full path of the tool.\r
self._BuildModule()\r
\r
if self.Target == 'cleanall':\r
- self.Db.Close()\r
RemoveDirectory(os.path.dirname(GlobalData.gDatabasePath), True)\r
\r
def CreateAsBuiltInf(self):\r
+ all_lib_set = set()\r
+ all_mod_set = set()\r
for Module in self.BuildModules:\r
Module.CreateAsBuiltInf()\r
+ all_mod_set.add(Module)\r
+ for Module in self.HashSkipModules:\r
+ Module.CreateAsBuiltInf(True)\r
+ all_mod_set.add(Module)\r
+ for Module in all_mod_set:\r
+ for lib in Module.LibraryAutoGenList:\r
+ all_lib_set.add(lib)\r
+ for lib in all_lib_set:\r
+ lib.CreateAsBuiltInf(True)\r
+ all_lib_set.clear()\r
+ all_mod_set.clear()\r
self.BuildModules = []\r
+ self.HashSkipModules = []\r
## Do some clean-up works when error occurred\r
def Relinquish(self):\r
OldLogLevel = EdkLogger.GetLevel()\r
EdkLogger.SetLevel(EdkLogger.ERROR)\r
- #self.DumpBuildData()\r
Utils.Progressor.Abort()\r
if self.SpawnMode == True:\r
BuildTask.Abort()\r
EdkLogger.SetLevel(OldLogLevel)\r
\r
- def DumpBuildData(self):\r
- CacheDirectory = os.path.dirname(GlobalData.gDatabasePath)\r
- Utils.CreateDirectory(CacheDirectory)\r
- Utils.DataDump(Utils.gFileTimeStampCache, os.path.join(CacheDirectory, "gFileTimeStampCache"))\r
- Utils.DataDump(Utils.gDependencyDatabase, os.path.join(CacheDirectory, "gDependencyDatabase"))\r
-\r
- def RestoreBuildData(self):\r
- FilePath = os.path.join(os.path.dirname(GlobalData.gDatabasePath), "gFileTimeStampCache")\r
- if Utils.gFileTimeStampCache == {} and os.path.isfile(FilePath):\r
- Utils.gFileTimeStampCache = Utils.DataRestore(FilePath)\r
- if Utils.gFileTimeStampCache == None:\r
- Utils.gFileTimeStampCache = {}\r
-\r
- FilePath = os.path.join(os.path.dirname(GlobalData.gDatabasePath), "gDependencyDatabase")\r
- if Utils.gDependencyDatabase == {} and os.path.isfile(FilePath):\r
- Utils.gDependencyDatabase = Utils.DataRestore(FilePath)\r
- if Utils.gDependencyDatabase == None:\r
- Utils.gDependencyDatabase = {}\r
-\r
def ParseDefines(DefineList=[]):\r
DefineDict = {}\r
- if DefineList != None:\r
+ if DefineList is not None:\r
for Define in DefineList:\r
DefineTokenList = Define.split("=", 1)\r
if not GlobalData.gMacroNamePattern.match(DefineTokenList[0]):\r
else:\r
parser.error("Option %s only allows one instance in command line!" % option)\r
\r
+def LogBuildTime(Time):\r
+ if Time:\r
+ TimeDurStr = ''\r
+ TimeDur = time.gmtime(Time)\r
+ if TimeDur.tm_yday > 1:\r
+ TimeDurStr = time.strftime("%H:%M:%S", TimeDur) + ", %d day(s)" % (TimeDur.tm_yday - 1)\r
+ else:\r
+ TimeDurStr = time.strftime("%H:%M:%S", TimeDur)\r
+ return TimeDurStr\r
+ else:\r
+ return None\r
+\r
## Parse command line options\r
#\r
# Using standard Python module optparse to parse command line option of this tool.\r
# @retval Args Target of build command\r
#\r
def MyOptionParser():\r
- Parser = OptionParser(description=__copyright__,version=__version__,prog="build.exe",usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")\r
- Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest="TargetArch",\r
- help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")\r
+ Parser = OptionParser(description=__copyright__, version=__version__, prog="build.exe", usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")\r
+ Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32', 'X64', 'EBC', 'ARM', 'AARCH64'], dest="TargetArch",\r
+ help="ARCHS is one of list: IA32, X64, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")\r
Parser.add_option("-p", "--platform", action="callback", type="string", dest="PlatformFile", callback=SingleCheckCallback,\r
help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")\r
Parser.add_option("-m", "--module", action="callback", type="string", dest="ModuleFile", callback=SingleCheckCallback,\r
help="Using this name of SKU ID to build the platform, overriding SKUID_IDENTIFIER in DSC file.")\r
\r
Parser.add_option("-n", action="callback", type="int", dest="ThreadNumber", callback=SingleCheckCallback,\r
- help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. Less than 2 will disable multi-thread builds.")\r
+ help="Build the platform using multi-threaded compiler. The value overrides target.txt's MAX_CONCURRENT_THREAD_NUMBER. When value is set to 0, tool automatically detect number of "\\r
+ "processor threads, set value to 1 means disable multi-thread build, and set value to more than 1 means user specify the threads number to build.")\r
\r
Parser.add_option("-f", "--fdf", action="callback", type="string", dest="FdfFile", callback=SingleCheckCallback,\r
help="The name of the FDF file to use, which overrides the setting in the DSC file.")\r
Parser.add_option("-D", "--define", action="append", type="string", dest="Macros", help="Macro: \"Name [= Value]\".")\r
\r
Parser.add_option("-y", "--report-file", action="store", dest="ReportFile", help="Create/overwrite the report to the specified filename.")\r
- Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest="ReportType", default=[],\r
- help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\\r
- "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")\r
+ Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD', 'LIBRARY', 'FLASH', 'DEPEX', 'BUILD_FLAGS', 'FIXED_ADDRESS', 'HASH', 'EXECUTION_ORDER'], dest="ReportType", default=[],\r
+ help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, HASH, EXECUTION_ORDER]. "\\r
+ "To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, HASH, BUILD_FLAGS, FIXED_ADDRESS]")\r
Parser.add_option("-F", "--flag", action="store", type="string", dest="Flag",\r
help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\\r
"This option can also be specified by setting *_*_*_BUILD_FLAGS in [BuildOptions] section of platform DSC. If they are both specified, this value "\\r
Parser.add_option("--conf", action="store", type="string", dest="ConfDirectory", help="Specify the customized Conf directory.")\r
Parser.add_option("--check-usage", action="store_true", dest="CheckUsage", default=False, help="Check usage content of entries listed in INF file.")\r
Parser.add_option("--ignore-sources", action="store_true", dest="IgnoreSources", default=False, help="Focus to a binary build and ignore all source files")\r
-\r
- (Opt, Args)=Parser.parse_args()\r
+ Parser.add_option("--pcd", action="append", dest="OptionPcd", help="Set PCD value by command line. Format: \"PcdName=Value\" ")\r
+ Parser.add_option("-l", "--cmd-len", action="store", type="int", dest="CommandLength", help="Specify the maximum line length of build command. Default is 4096.")\r
+ Parser.add_option("--hash", action="store_true", dest="UseHashCache", default=False, help="Enable hash-based caching during build process.")\r
+ Parser.add_option("--binary-destination", action="store", type="string", dest="BinCacheDest", help="Generate a cache of binary files in the specified directory.")\r
+ Parser.add_option("--binary-source", action="store", type="string", dest="BinCacheSource", help="Consume a cache of binary files from the specified directory.")\r
+ Parser.add_option("--genfds-multi-thread", action="store_true", dest="GenfdsMultiThread", default=False, help="Enable GenFds multi thread to generate ffs file.")\r
+ Parser.add_option("--disable-include-path-check", action="store_true", dest="DisableIncludePathCheck", default=False, help="Disable the include path check for outside of package.")\r
+ (Opt, Args) = Parser.parse_args()\r
return (Opt, Args)\r
\r
## Tool entrance method\r
\r
# Initialize log system\r
EdkLogger.Initialize()\r
-\r
+ GlobalData.gCommand = sys.argv[1:]\r
#\r
# Parse the options and args\r
#\r
GlobalData.gCaseInsensitive = Option.CaseInsensitive\r
\r
# Set log level\r
- if Option.verbose != None:\r
+ if Option.verbose is not None:\r
EdkLogger.SetLevel(EdkLogger.VERBOSE)\r
- elif Option.quiet != None:\r
+ elif Option.quiet is not None:\r
EdkLogger.SetLevel(EdkLogger.QUIET)\r
- elif Option.debug != None:\r
+ elif Option.debug is not None:\r
EdkLogger.SetLevel(Option.debug + 1)\r
else:\r
EdkLogger.SetLevel(EdkLogger.INFO)\r
\r
- if Option.LogFile != None:\r
+ if Option.LogFile is not None:\r
EdkLogger.SetLogFile(Option.LogFile)\r
\r
if Option.WarningAsError == True:\r
EdkLogger.quiet(time.strftime("Build start time: %H:%M:%S, %b.%d %Y\n", time.localtime()));\r
ReturnCode = 0\r
MyBuild = None\r
+ BuildError = True\r
try:\r
if len(Target) == 0:\r
Target = "all"\r
elif len(Target) >= 2:\r
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "More than one targets are not supported.",\r
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))\r
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r
else:\r
Target = Target[0].lower()\r
\r
if Target not in gSupportedTarget:\r
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "Not supported target [%s]." % Target,\r
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))\r
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r
\r
#\r
# Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH\r
if ErrorCode != 0:\r
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r
\r
- if Option.PlatformFile != None:\r
+ if Option.PlatformFile is not None:\r
if os.path.isabs (Option.PlatformFile):\r
if os.path.normcase (os.path.normpath(Option.PlatformFile)).find (Workspace) == 0:\r
Option.PlatformFile = NormFile(os.path.normpath(Option.PlatformFile), Workspace)\r
Option.PlatformFile = PathClass(Option.PlatformFile, Workspace)\r
\r
- if Option.FdfFile != None:\r
+ if Option.FdfFile is not None:\r
if os.path.isabs (Option.FdfFile):\r
if os.path.normcase (os.path.normpath(Option.FdfFile)).find (Workspace) == 0:\r
Option.FdfFile = NormFile(os.path.normpath(Option.FdfFile), Workspace)\r
if ErrorCode != 0:\r
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)\r
\r
- if Option.Flag != None and Option.Flag not in ['-c', '-s']:\r
+ if Option.Flag is not None and Option.Flag not in ['-c', '-s']:\r
EdkLogger.error("build", OPTION_VALUE_INVALID, "UNI flag must be one of -c or -s")\r
\r
MyBuild = Build(Target, Workspace, Option)\r
GlobalData.gCommandLineDefines['ARCH'] = ' '.join(MyBuild.ArchList)\r
- MyBuild.Launch()\r
- # Drop temp tables to avoid database locked.\r
- for TmpTableName in TmpTableDict:\r
- SqlCommand = """drop table IF EXISTS %s""" % TmpTableName\r
- TmpTableDict[TmpTableName].execute(SqlCommand)\r
- #MyBuild.DumpBuildData()\r
- except FatalError, X:\r
- if MyBuild != None:\r
+ if not (MyBuild.LaunchPrebuildFlag and os.path.exists(MyBuild.PlatformBuildPath)):\r
+ MyBuild.Launch()\r
+\r
+ #\r
+ # All job done, no error found and no exception raised\r
+ #\r
+ BuildError = False\r
+ except FatalError as X:\r
+ if MyBuild is not None:\r
# for multi-thread build exits safely\r
MyBuild.Relinquish()\r
- if Option != None and Option.debug != None:\r
+ if Option is not None and Option.debug is not None:\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
ReturnCode = X.args[0]\r
- except Warning, X:\r
+ except Warning as X:\r
# error from Fdf parser\r
- if MyBuild != None:\r
+ if MyBuild is not None:\r
# for multi-thread build exits safely\r
MyBuild.Relinquish()\r
- if Option != None and Option.debug != None:\r
+ if Option is not None and Option.debug is not None:\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
else:\r
- EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError = False)\r
+ EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError=False)\r
ReturnCode = FORMAT_INVALID\r
except KeyboardInterrupt:\r
ReturnCode = ABORT_ERROR\r
- if Option != None and Option.debug != None:\r
+ if Option is not None and Option.debug is not None:\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
except:\r
- if MyBuild != None:\r
+ if MyBuild is not None:\r
# for multi-thread build exits safely\r
MyBuild.Relinquish()\r
\r
# try to get the meta-file from the object causing exception\r
Tb = sys.exc_info()[-1]\r
MetaFile = GlobalData.gProcessingFile\r
- while Tb != None:\r
+ while Tb is not None:\r
if 'self' in Tb.tb_frame.f_locals and hasattr(Tb.tb_frame.f_locals['self'], 'MetaFile'):\r
MetaFile = Tb.tb_frame.f_locals['self'].MetaFile\r
Tb = Tb.tb_next\r
"\nbuild",\r
CODE_ERROR,\r
"Unknown fatal error when processing [%s]" % MetaFile,\r
- ExtraData="\n(Please send email to edk2-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",\r
+ ExtraData="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",\r
RaiseError=False\r
)\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
Utils.ClearDuplicatedInf()\r
\r
if ReturnCode == 0:\r
- Conclusion = "Done"\r
+ try:\r
+ MyBuild.LaunchPostbuild()\r
+ Conclusion = "Done"\r
+ except:\r
+ Conclusion = "Failed"\r
elif ReturnCode == ABORT_ERROR:\r
Conclusion = "Aborted"\r
else:\r
BuildDuration = time.gmtime(int(round(FinishTime - StartTime)))\r
BuildDurationStr = ""\r
if BuildDuration.tm_yday > 1:\r
- BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)"%(BuildDuration.tm_yday - 1)\r
+ BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)" % (BuildDuration.tm_yday - 1)\r
else:\r
BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration)\r
- if MyBuild != None:\r
- MyBuild.BuildReport.GenerateReport(BuildDurationStr)\r
- MyBuild.Db.Close()\r
+ if MyBuild is not None:\r
+ if not BuildError:\r
+ MyBuild.BuildReport.GenerateReport(BuildDurationStr, LogBuildTime(MyBuild.AutoGenTime), LogBuildTime(MyBuild.MakeTime), LogBuildTime(MyBuild.GenFdsTime))\r
+\r
EdkLogger.SetLevel(EdkLogger.QUIET)\r
EdkLogger.quiet("\n- %s -" % Conclusion)\r
EdkLogger.quiet(time.strftime("Build end time: %H:%M:%S, %b.%d %Y", time.localtime()))\r
projects / mirror_edk2.git / blobdiff