# build a platform or a module\r
#\r
# Copyright (c) 2014, Hewlett-Packard Development Company, L.P.<BR>\r
-# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2016, Intel Corporation. All rights reserved.<BR>\r
#\r
# This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in EFI_SOURCE path",\r
ExtraData=EfiSourceDir)\r
\r
- # change absolute path to relative path to WORKSPACE\r
- if EfiSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir, EfiSourceDir))\r
- if EdkSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir, EdkSourceDir))\r
- if EcpSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
- EdkLogger.error("build", PARAMETER_INVALID, "ECP_SOURCE is not under WORKSPACE",\r
- ExtraData="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir, EcpSourceDir))\r
+ # check those variables on single workspace case\r
+ if not PackagesPath:\r
+ # change absolute path to relative path to WORKSPACE\r
+ if EfiSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
+ EdkLogger.error("build", PARAMETER_INVALID, "EFI_SOURCE is not under WORKSPACE",\r
+ ExtraData="WORKSPACE = %s\n EFI_SOURCE = %s" % (WorkspaceDir, EfiSourceDir))\r
+ if EdkSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
+ EdkLogger.error("build", PARAMETER_INVALID, "EDK_SOURCE is not under WORKSPACE",\r
+ ExtraData="WORKSPACE = %s\n EDK_SOURCE = %s" % (WorkspaceDir, EdkSourceDir))\r
+ if EcpSourceDir.upper().find(WorkspaceDir.upper()) != 0:\r
+ EdkLogger.error("build", PARAMETER_INVALID, "ECP_SOURCE is not under WORKSPACE",\r
+ ExtraData="WORKSPACE = %s\n ECP_SOURCE = %s" % (WorkspaceDir, EcpSourceDir))\r
\r
# check EDK_TOOLS_PATH\r
if "EDK_TOOLS_PATH" not in os.environ:\r
\r
# check if the file path exists or not\r
if not os.path.isfile(FileFullPath):\r
- EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)\r
+ EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)\r
\r
# remove workspace directory from the beginning part of the file path\r
if Workspace[-1] in ["\\", "/"]:\r
Proc.wait()\r
except: # in case of aborting\r
# terminate the threads redirecting the program output\r
+ EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
if EndOfProcedure != None:\r
EndOfProcedure.set()\r
if Proc == None:\r
\r
# print current build environment and configuration\r
EdkLogger.quiet("%-16s = %s" % ("WORKSPACE", os.environ["WORKSPACE"]))\r
+ if "PACKAGES_PATH" in os.environ:\r
+ # WORKSPACE env has been converted before. Print the same path style with WORKSPACE env. \r
+ EdkLogger.quiet("%-16s = %s" % ("PACKAGES_PATH", os.path.normcase(os.path.normpath(os.environ["PACKAGES_PATH"]))))\r
EdkLogger.quiet("%-16s = %s" % ("ECP_SOURCE", os.environ["ECP_SOURCE"]))\r
EdkLogger.quiet("%-16s = %s" % ("EDK_SOURCE", os.environ["EDK_SOURCE"]))\r
EdkLogger.quiet("%-16s = %s" % ("EFI_SOURCE", os.environ["EFI_SOURCE"]))\r
EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_PATH", os.environ["EDK_TOOLS_PATH"]))\r
+ if "EDK_TOOLS_BIN" in os.environ:\r
+ # Print the same path style with WORKSPACE env. \r
+ EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os.path.normcase(os.path.normpath(os.environ["EDK_TOOLS_BIN"]))))\r
\r
EdkLogger.info("")\r
\r
# Update Image to new BaseAddress by GenFw tool\r
#\r
LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r
- LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
+ LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
else:\r
#\r
# Set new address to the section header only for SMM driver.\r
#\r
LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)\r
- LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
+ LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)\r
#\r
# Collect funtion address from Map file\r
#\r
FunctionList = []\r
if os.path.exists(ImageMapTable):\r
OrigImageBaseAddress = 0\r
- ImageMap = open (ImageMapTable, 'r')\r
+ ImageMap = open(ImageMapTable, 'r')\r
for LinStr in ImageMap:\r
if len (LinStr.strip()) == 0:\r
continue\r
\r
StrList = LinStr.split()\r
if len (StrList) > 4:\r
- if StrList[3] == 'f' or StrList[3] =='F':\r
+ if StrList[3] == 'f' or StrList[3] == 'F':\r
Name = StrList[1]\r
RelativeAddress = int (StrList[2], 16) - OrigImageBaseAddress\r
FunctionList.append ((Name, RelativeAddress))\r
if not ImageClass.IsValid:\r
EdkLogger.error("build", FILE_PARSE_FAILURE, ExtraData=ImageClass.ErrorInfo)\r
ImageInfo = PeImageInfo(Module.Name, Module.Guid, Module.Arch, Module.OutputDir, Module.DebugDir, ImageClass)\r
- if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:\r
+ if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER', 'PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:\r
PeiModuleList[Module.MetaFile] = ImageInfo\r
PeiSize += ImageInfo.Image.Size\r
elif Module.ModuleType in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:\r
for PcdInfo in PcdTable:\r
ReturnValue = 0\r
if PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize / 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize / 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize / 0x1000))\r
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE and len (SmmModuleList) > 0:\r
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize/0x1000))\r
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize / 0x1000))\r
if ReturnValue != 0:\r
EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)\r
\r
- MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize/0x1000))\r
- MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize/0x1000))\r
- MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize/0x1000))\r
+ MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize / 0x1000))\r
+ MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize / 0x1000))\r
+ MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize / 0x1000))\r
if len (SmmModuleList) > 0:\r
- MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize/0x1000))\r
+ MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize / 0x1000))\r
\r
PeiBaseAddr = TopMemoryAddress - RtSize - BtSize\r
BtBaseAddr = TopMemoryAddress - RtSize\r
self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)\r
self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)\r
self._RebaseModule (MapBuffer, RtBaseAddr, RtModuleList, TopMemoryAddress == 0)\r
- self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset = False, ModeIsSmm = True)\r
+ self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset=False, ModeIsSmm=True)\r
MapBuffer.write('\n\n')\r
sys.stdout.write ("\n")\r
sys.stdout.flush()\r
SaveFileOnChange(MapFilePath, MapBuffer.getvalue(), False)\r
MapBuffer.close()\r
if self.LoadFixAddress != 0:\r
- sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))\r
+ sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath))\r
sys.stdout.flush()\r
\r
## Build active platform for different build targets and different tool chains\r
BUILD_ERROR,\r
"Module for [%s] is not a component of active platform."\\r
" Please make sure that the ARCH and inf file path are"\\r
- " given in the same as in [%s]" %\\r
+ " given in the same as in [%s]" % \\r
(', '.join(Wa.ArchList), self.PlatformFile),\r
ExtraData=self.ModuleFile\r
)\r
# @retval Args Target of build command\r
#\r
def MyOptionParser():\r
- Parser = OptionParser(description=__copyright__,version=__version__,prog="build.exe",usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")\r
- Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest="TargetArch",\r
+ Parser = OptionParser(description=__copyright__, version=__version__, prog="build.exe", usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")\r
+ Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32', 'X64', 'IPF', 'EBC', 'ARM', 'AARCH64'], dest="TargetArch",\r
help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")\r
Parser.add_option("-p", "--platform", action="callback", type="string", dest="PlatformFile", callback=SingleCheckCallback,\r
help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")\r
Parser.add_option("-D", "--define", action="append", type="string", dest="Macros", help="Macro: \"Name [= Value]\".")\r
\r
Parser.add_option("-y", "--report-file", action="store", dest="ReportFile", help="Create/overwrite the report to the specified filename.")\r
- Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest="ReportType", default=[],\r
+ Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD', 'LIBRARY', 'FLASH', 'DEPEX', 'BUILD_FLAGS', 'FIXED_ADDRESS', 'EXECUTION_ORDER'], dest="ReportType", default=[],\r
help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\\r
"To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")\r
Parser.add_option("-F", "--flag", action="store", type="string", dest="Flag",\r
Parser.add_option("--check-usage", action="store_true", dest="CheckUsage", default=False, help="Check usage content of entries listed in INF file.")\r
Parser.add_option("--ignore-sources", action="store_true", dest="IgnoreSources", default=False, help="Focus to a binary build and ignore all source files")\r
\r
- (Opt, Args)=Parser.parse_args()\r
+ (Opt, Args) = Parser.parse_args()\r
return (Opt, Args)\r
\r
## Tool entrance method\r
Target = "all"\r
elif len(Target) >= 2:\r
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "More than one targets are not supported.",\r
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))\r
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r
else:\r
Target = Target[0].lower()\r
\r
if Target not in gSupportedTarget:\r
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "Not supported target [%s]." % Target,\r
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))\r
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))\r
\r
#\r
# Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH\r
if Option != None and Option.debug != None:\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
else:\r
- EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError = False)\r
+ EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError=False)\r
ReturnCode = FORMAT_INVALID\r
except KeyboardInterrupt:\r
ReturnCode = ABORT_ERROR\r
"\nbuild",\r
CODE_ERROR,\r
"Unknown fatal error when processing [%s]" % MetaFile,\r
- ExtraData="\n(Please send email to edk2-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",\r
+ ExtraData="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",\r
RaiseError=False\r
)\r
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())\r
BuildDuration = time.gmtime(int(round(FinishTime - StartTime)))\r
BuildDurationStr = ""\r
if BuildDuration.tm_yday > 1:\r
- BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)"%(BuildDuration.tm_yday - 1)\r
+ BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)" % (BuildDuration.tm_yday - 1)\r
else:\r
BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration)\r
if MyBuild != None:\r
projects / mirror_edk2.git / blobdiff