/** @file\r
Main Header file for the MMC DXE driver\r
\r
- Copyright (c) 2011-2014, ARM Limited. All rights reserved.\r
+ Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
\r
#include <Library/UefiLib.h>\r
#include <Library/DebugLib.h>\r
+#include <Library/UefiBootServicesTableLib.h>\r
\r
#define MMC_TRACE(txt) DEBUG((EFI_D_BLKIO, "MMC: " txt "\n"))\r
\r
#define MMC_R0_STATE_TRAN 4\r
#define MMC_R0_STATE_DATA 5\r
\r
+#define EMMC_CMD6_ARG_ACCESS(x) (((x) & 0x3) << 24)\r
+#define EMMC_CMD6_ARG_INDEX(x) (((x) & 0xFF) << 16)\r
+#define EMMC_CMD6_ARG_VALUE(x) (((x) & 0xFF) << 8)\r
+#define EMMC_CMD6_ARG_CMD_SET(x) (((x) & 0x7) << 0)\r
+\r
typedef enum {\r
UNKNOWN_CARD,\r
MMC_CARD, //MMC card\r
UINT8 NSAC ; // Data read access-time 2 in CLK cycles (NSAC*100) [111:104]\r
UINT8 TAAC ; // Data read access-time 1 [119:112]\r
\r
- UINT8 RESERVED_5: 6; // Reserved [125:120]\r
+ UINT8 RESERVED_5: 2; // Reserved [121:120]\r
+ UINT8 SPEC_VERS: 4; // System specification version [125:122]\r
UINT8 CSD_STRUCTURE: 2; // CSD structure [127:126]\r
} CSD;\r
\r
+typedef struct {\r
+ UINT8 RESERVED_1[16]; // Reserved [15:0]\r
+ UINT8 SECURE_REMOVAL_TYPE; // Secure Removal Type [16:16]\r
+ UINT8 PRODUCT_STATE_AWARENESS_ENABLEMENT; // Product state awareness enablement [17:17]\r
+ UINT8 MAX_PRE_LOADING_DATA_SIZE[4]; // MAX pre loading data size [21:18]\r
+ UINT8 PRE_LOADING_DATA_SIZE[4]; // Pre loading data size [25:22]\r
+ UINT8 FFU_STATUS; // FFU Status [26:26]\r
+ UINT8 RESERVED_2[2]; // Reserved [28:27]\r
+ UINT8 MODE_OPERATION_CODES; // Mode operation codes [29:29]\r
+ UINT8 MODE_CONFIG; // Mode config [30:30]\r
+ UINT8 RESERVED_3; // Reserved [31:31]\r
+ UINT8 FLUSH_CACHE; // Flushing of the cache [32:32]\r
+ UINT8 CACHE_CTRL; // Control to turn the cache ON/OFF [33:33]\r
+ UINT8 POWER_OFF_NOTIFICATION; // Power Off Notification [34:34]\r
+ UINT8 PACKED_FAILURE_INDEX; // Packed command failure index [35:35]\r
+ UINT8 PACKED_COMMAND_STATUS; // Packed command status [36:36]\r
+ UINT8 CONTEXT_CONF[15]; // Context configuration [51:37]\r
+ UINT8 EXT_PARTITIONS_ATTRIBUTE[2]; // Extended partitions attribute [53:52]\r
+ UINT8 EXCEPTION_EVENTS_STATUS[2]; // Exception events status [55:54]\r
+ UINT8 EXCEPTION_EVENTS_CTRL[2]; // Exception events control [57:56]\r
+ UINT8 DYNCAP_NEEDED; // Number of addressed group to be released [58:58]\r
+ UINT8 CLASS_6_CTRL; // Class 6 commands control [59:59]\r
+ UINT8 INI_TIMEOUT_EMU; // 1st initialization after disabling sector size emulation [60:60]\r
+ UINT8 DATA_SECTOR_SIZE; // Sector size [61:61]\r
+ UINT8 USE_NATIVE_SECTOR; // Sector size emulation [62:62]\r
+ UINT8 NATIVE_SECTOR_SIZE; // Native sector size [63:63]\r
+ UINT8 VENDOR_SPECIFIC_FIELD[64]; // Vendor specific fields [127:64]\r
+ UINT8 RESERVED_4[2]; // Reserved [129:128]\r
+ UINT8 PROGRAM_CID_CSD_DDR_SUPPORT; // Program CID/CSD in DDR mode support [130:130]\r
+ UINT8 PERIODIC_WAKEUP; // Periodic wake-up [131:131]\r
+ UINT8 TCASE_SUPPORT; // Package case temperature is controlled [132:132]\r
+ UINT8 PRODUCTION_STATE_AWARENESS; // Production state awareness [133:133]\r
+ UINT8 SECTOR_BAD_BLK_MGMNT; // Bad block management mode [134:134]\r
+ UINT8 RESERVED_5; // Reserved [135:135]\r
+ UINT8 ENH_START_ADDR[4]; // Enhanced user data start address [139:136]\r
+ UINT8 ENH_SIZE_MULT[3]; // Enhanced user data area size [142:140]\r
+ UINT8 GP_SIZE_MULT[12]; // General purpose partition size [154:143]\r
+ UINT8 PARTITION_SETTING_COMPLETED; // Partitioning setting [155:155]\r
+ UINT8 PARTITIONS_ATTRIBUTE; // Partitions attribute [156:156]\r
+ UINT8 MAX_ENH_SIZE_MULT[3]; // Max enhanced area size [159:157]\r
+ UINT8 PARTITIONING_SUPPORT; // Partitioning [160:160]\r
+ UINT8 HPI_MGMT; // HPI management [161:161]\r
+ UINT8 RST_N_FUNCTION; // H/W reset function [162:162]\r
+ UINT8 BKOPS_EN; // Enable background operations handshake [163:163]\r
+ UINT8 BKOPS_START; // Manually start background operations [164:164]\r
+ UINT8 SANITIZE_START; // Start sanitize operation [165:165]\r
+ UINT8 WR_REL_PARAM; // Write reliability parameter register [166:166]\r
+ UINT8 WR_REL_SET; // Write reliability setting register [167:167]\r
+ UINT8 RPMB_SIZE_MULT; // RPMB size [168:168]\r
+ UINT8 FW_CONFIG; // FW configuration [169:169]\r
+ UINT8 RESERVED_6; // Reserved [170:170]\r
+ UINT8 USER_WP; // User area write protection register [171:171]\r
+ UINT8 RESERVED_7; // Reserved [172:172]\r
+ UINT8 BOOT_WP; // Boot area write protection register [173:173]\r
+ UINT8 BOOT_WP_STATUS; // Boot write protection register [174:174]\r
+ UINT8 ERASE_GROUP_DEF; // High-density erase group definition [175:175]\r
+ UINT8 RESERVED_8; // Reserved [176:176]\r
+ UINT8 BOOT_BUS_CONDITIONS; // Boot bus conditions [177:177]\r
+ UINT8 BOOT_CONFIG_PROT; // Boot config protection [178:178]\r
+ UINT8 PARTITION_CONFIG; // Partition config [179:179]\r
+ UINT8 RESERVED_9; // Reserved [180:180]\r
+ UINT8 ERASED_MEM_CONT; // Erased memory content [181:181]\r
+ UINT8 RESERVED_10; // Reserved [182:182]\r
+ UINT8 BUS_WIDTH; // Bus width mode [183:183]\r
+ UINT8 RESERVED_11; // Reserved [184:184]\r
+ UINT8 HS_TIMING; // High-speed interface timing [185:185]\r
+ UINT8 RESERVED_12; // Reserved [186:186]\r
+ UINT8 POWER_CLASS; // Power class [187:187]\r
+ UINT8 RESERVED_13; // Reserved [188:188]\r
+ UINT8 CMD_SET_REV; // Command set revision [189:189]\r
+ UINT8 RESERVED_14; // Reserved [190:190]\r
+ UINT8 CMD_SET; // Command set [191:191]\r
+ UINT8 EXT_CSD_REV; // Extended CSD revision [192:192]\r
+ UINT8 RESERVED_15; // Reserved [193:193]\r
+ UINT8 CSD_STRUCTURE; // CSD Structure [194:194]\r
+ UINT8 RESERVED_16; // Reserved [195:195]\r
+ UINT8 DEVICE_TYPE; // Device type [196:196]\r
+ UINT8 DRIVER_STRENGTH; // I/O Driver strength [197:197]\r
+ UINT8 OUT_OF_INTERRUPT_TIME; // Out-of-interrupt busy timing [198:198]\r
+ UINT8 PARTITION_SWITCH_TIME; // Partition switching timing [199:199]\r
+ UINT8 PWR_CL_52_195; // Power class for 52MHz at 1.95V 1 R [200:200]\r
+ UINT8 PWR_CL_26_195; // Power class for 26MHz at 1.95V 1 R [201:201]\r
+ UINT8 PWR_CL_52_360; // Power class for 52MHz at 3.6V 1 R [202:202]\r
+ UINT8 PWR_CL_26_360; // Power class for 26MHz at 3.6V 1 R [203:203]\r
+ UINT8 RESERVED_17; // Reserved [204:204]\r
+ UINT8 MIN_PERF_R_4_26; // Minimum read performance for 4bit at 26MHz [205:205]\r
+ UINT8 MIN_PERF_W_4_26; // Minimum write performance for 4bit at 26MHz [206:206]\r
+ UINT8 MIN_PERF_R_8_26_4_52; // Minimum read performance for 8bit at 26MHz, for 4bit at 52MHz [207:207]\r
+ UINT8 MIN_PERF_W_8_26_4_52; // Minimum write performance for 8bit at 26MHz, for 4bit at 52MHz [208:208]\r
+ UINT8 MIN_PERF_R_8_52; // Minimum read performance for 8bit at 52MHz [209:209]\r
+ UINT8 MIN_PERF_W_8_52; // Minimum write performance for 8bit at 52MHz [210:210]\r
+ UINT8 RESERVED_18; // Reserved [211:211]\r
+ UINT32 SECTOR_COUNT; // Sector count [215:212]\r
+ UINT8 SLEEP_NOTIFICATION_TIME; // Sleep notification timout [216:216]\r
+ UINT8 S_A_TIMEOUT; // Sleep/awake timeout [217:217]\r
+ UINT8 PRODUCTION_STATE_AWARENESS_TIMEOUT; // Production state awareness timeout [218:218]\r
+ UINT8 S_C_VCCQ; // Sleep current (VCCQ) [219:219]\r
+ UINT8 S_C_VCC; // Sleep current (VCC) [220:220]\r
+ UINT8 HC_WP_GRP_SIZE; // High-capacity write protect group size [221:221]\r
+ UINT8 REL_WR_SECTOR_C; // Reliable write sector count [222:222]\r
+ UINT8 ERASE_TIMEOUT_MULT; // High-capacity erase timeout [223:223]\r
+ UINT8 HC_ERASE_GRP_SIZE; // High-capacity erase unit size [224:224]\r
+ UINT8 ACC_SIZE; // Access size [225:225]\r
+ UINT8 BOOT_SIZE_MULTI; // Boot partition size [226:226]\r
+ UINT8 RESERVED_19; // Reserved [227:227]\r
+ UINT8 BOOT_INFO; // Boot information [228:228]\r
+ UINT8 SECURE_TRIM_MULT; // Secure TRIM Multiplier [229:229]\r
+ UINT8 SECURE_ERASE_MULT; // Secure Erase Multiplier [230:230]\r
+ UINT8 SECURE_FEATURE_SUPPORT; // Secure Feature Support [231:231]\r
+ UINT8 TRIM_MULT; // TRIM Multiplier [232:232]\r
+ UINT8 RESERVED_20; // Reserved [233:233]\r
+ UINT8 MIN_PREF_DDR_R_8_52; // Minimum read performance for 8bit at 52MHz in DDR mode [234:234]\r
+ UINT8 MIN_PREF_DDR_W_8_52; // Minimum write performance for 8bit at 52MHz in DDR mode [235:235]\r
+ UINT8 PWR_CL_200_130; // Power class for 200MHz at VCCQ=1.3V, VCC=3.6V [236:236]\r
+ UINT8 PWR_CL_200_195; // Power class for 200MHz at VCCQ=1.95V, VCC=3.6V [237:237]\r
+ UINT8 PWR_CL_DDR_52_195; // Power class for 52MHz, DDR at 1.95V [238:238]\r
+ UINT8 PWR_CL_DDR_52_360; // Power class for 52Mhz, DDR at 3.6V [239:239]\r
+ UINT8 RESERVED_21; // Reserved [240:240]\r
+ UINT8 INI_TIMEOUT_AP; // 1st initialization time after partitioning [241:241]\r
+ UINT8 CORRECTLY_PRG_SECTORS_NUM[4]; // Number of correctly programmed sectors [245:242]\r
+ UINT8 BKOPS_STATUS; // Background operations status [246:246]\r
+ UINT8 POWER_OFF_LONG_TIME; // Power off notification (long) timeout [247:247]\r
+ UINT8 GENERIC_CMD6_TIME; // Generic CMD6 timeout [248:248]\r
+ UINT8 CACHE_SIZE[4]; // Cache size [252:249]\r
+ UINT8 PWR_CL_DDR_200_360; // Power class for 200MHz, DDR at VCC=3.6V [253:253]\r
+ UINT8 FIRMWARE_VERSION[8]; // Firmware version [261:254]\r
+ UINT8 DEVICE_VERSION[2]; // Device version [263:262]\r
+ UINT8 OPTIMAL_TRIM_UNIT_SIZE; // Optimal trim unit size [264:264]\r
+ UINT8 OPTIMAL_WRITE_SIZE; // Optimal write size [265:265]\r
+ UINT8 OPTIMAL_READ_SIZE; // Optimal read size [266:266]\r
+ UINT8 PRE_EOL_INFO; // Pre EOL information [267:267]\r
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_A; // Device life time estimation type A [268:268]\r
+ UINT8 DEVICE_LIFE_TIME_EST_TYP_B; // Device life time estimation type B [269:269]\r
+ UINT8 VENDOR_PROPRIETARY_HEALTH_REPORT[32]; // Vendor proprietary health report [301:270]\r
+ UINT8 NUMBER_OF_FW_SECTORS_CORRECTLY_PROGRAMMED[4]; // Number of FW sectors correctly programmed [305:302]\r
+ UINT8 RESERVED_22[181]; // Reserved [486:306]\r
+ UINT8 FFU_ARG[4]; // FFU argument [490:487]\r
+ UINT8 OPERATION_CODE_TIMEOUT; // Operation codes timeout [491:491]\r
+ UINT8 FFU_FEATURES; // FFU features [492:492]\r
+ UINT8 SUPPORTED_MODES; // Supported modes [493:493]\r
+ UINT8 EXT_SUPPORT; // Extended partitions attribute support [494:494]\r
+ UINT8 LARGE_UNIT_SIZE_M1; // Large unit size [495:495]\r
+ UINT8 CONTEXT_CAPABILITIES; // Context management capabilities [496:496]\r
+ UINT8 TAG_RES_SIZE; // Tag resource size [497:497]\r
+ UINT8 TAG_UNIT_SIZE; // Tag unit size [498:498]\r
+ UINT8 DATA_TAG_SUPPORT; // Data tag support [499:499]\r
+ UINT8 MAX_PACKED_WRITES; // Max packed write commands [500:500]\r
+ UINT8 MAX_PACKED_READS; // Max packed read commands [501:501]\r
+ UINT8 BKOPS_SUPPORT; // Background operations support [502:502]\r
+ UINT8 HPI_FEATURES; // HPI features [503:503]\r
+ UINT8 S_CMD_SET; // Supported command sets [504:504]\r
+ UINT8 EXT_SECURITY_ERR; // Extended security commands error [505:505]\r
+ UINT8 RESERVED_23[6]; // Reserved [511:506]\r
+} ECSD;\r
+\r
typedef struct {\r
UINT16 RCA;\r
CARD_TYPE CardType;\r
OCR OCRData;\r
CID CIDData;\r
CSD CSDData;\r
+ ECSD ECSDData; // MMC V4 extended card specific\r
} CARD_INFO;\r
\r
typedef struct _MMC_HOST_INSTANCE {\r
projects / mirror_edk2.git / blobdiff