\r
EFI_STATUS\r
MmcNotifyState (\r
- MMC_HOST_INSTANCE *MmcHostInstance,\r
- MMC_STATE State\r
- ) {\r
- MmcHostInstance->State = State;\r
- return MmcHostInstance->MmcHost->NotifyState(State);\r
+ IN MMC_HOST_INSTANCE *MmcHostInstance,\r
+ IN MMC_STATE State\r
+ )\r
+{\r
+ MmcHostInstance->State = State;\r
+ return MmcHostInstance->MmcHost->NotifyState(State);\r
}\r
\r
-VOID PrintOCR(UINT32 ocr) {\r
- UINTN minv, maxv, volts;\r
- UINTN loop;\r
-\r
- minv = 36; // 3.6\r
- maxv = 20; // 2.0\r
- volts = 20; // 2.0\r
-\r
- // The MMC register bits [23:8] indicate the working range of the card\r
- for (loop = 8; loop < 24; loop++) {\r
- if (ocr & (1 << loop)) {\r
- if (minv > volts) minv = volts;\r
- if (maxv < volts) maxv = volts + 1;\r
- }\r
- volts = volts + 1;\r
+VOID\r
+PrintOCR (\r
+ IN UINT32 Ocr\r
+ )\r
+{\r
+ UINTN minv, maxv, volts;\r
+ UINTN loop;\r
+\r
+ minv = 36; // 3.6\r
+ maxv = 20; // 2.0\r
+ volts = 20; // 2.0\r
+\r
+ // The MMC register bits [23:8] indicate the working range of the card\r
+ for (loop = 8; loop < 24; loop++) {\r
+ if (Ocr & (1 << loop)) {\r
+ if (minv > volts) minv = volts;\r
+ if (maxv < volts) maxv = volts + 1;\r
}\r
-\r
- DEBUG((EFI_D_ERROR, "- PrintOCR ocr (0x%X)\n",ocr));\r
- DEBUG((EFI_D_ERROR, "\t- Card operating voltage: %d.%d to %d.%d\n", minv/10, minv % 10, maxv/10, maxv % 10));\r
- if (((ocr >> 29) & 3) == 0)\r
- DEBUG((EFI_D_ERROR, "\t- AccessMode: Byte Mode\n"));\r
- else\r
- DEBUG((EFI_D_ERROR, "\t- AccessMode: Block Mode (0x%X)\n",((ocr >> 29) & 3)));\r
-\r
- if (ocr & MMC_OCR_POWERUP)\r
- DEBUG((EFI_D_ERROR, "\t- PowerUp\n"));\r
- else\r
- DEBUG((EFI_D_ERROR, "\t- Voltage Not Supported\n"));\r
+ volts = volts + 1;\r
+ }\r
+\r
+ DEBUG((EFI_D_ERROR, "- PrintOCR Ocr (0x%X)\n",Ocr));\r
+ DEBUG((EFI_D_ERROR, "\t- Card operating voltage: %d.%d to %d.%d\n", minv/10, minv % 10, maxv/10, maxv % 10));\r
+ if (((Ocr >> 29) & 3) == 0) {\r
+ DEBUG((EFI_D_ERROR, "\t- AccessMode: Byte Mode\n"));\r
+ } else {\r
+ DEBUG((EFI_D_ERROR, "\t- AccessMode: Block Mode (0x%X)\n",((Ocr >> 29) & 3)));\r
+ }\r
+\r
+ if (Ocr & MMC_OCR_POWERUP) {\r
+ DEBUG((EFI_D_ERROR, "\t- PowerUp\n"));\r
+ } else {\r
+ DEBUG((EFI_D_ERROR, "\t- Voltage Not Supported\n"));\r
+ }\r
}\r
\r
-VOID PrintCID(UINT32* cid) {\r
- DEBUG((EFI_D_ERROR, "- PrintCID\n"));\r
- DEBUG((EFI_D_ERROR, "\t- Manufacturing date: %d/%d\n",(cid[0] >> 8) & 0xF,(cid[0] >> 12) & 0xFF));\r
- DEBUG((EFI_D_ERROR, "\t- Product serial number: 0x%X%X\n",cid[1] & 0xFFFFFF,(cid[0] >> 24) & 0xFF));\r
- DEBUG((EFI_D_ERROR, "\t- Product revision: %d\n",cid[1] >> 24));\r
- //DEBUG((EFI_D_ERROR, "\t- Product name: %s\n",(char*)(cid + 2)));\r
- DEBUG((EFI_D_ERROR, "\t- OEM ID: %c%c\n",(cid[3] >> 8) & 0xFF,(cid[3] >> 16) & 0xFF));\r
+VOID PrintCID (\r
+ IN UINT32* Cid\r
+ )\r
+{\r
+ DEBUG((EFI_D_ERROR, "- PrintCID\n"));\r
+ DEBUG((EFI_D_ERROR, "\t- Manufacturing date: %d/%d\n",(Cid[0] >> 8) & 0xF,(Cid[0] >> 12) & 0xFF));\r
+ DEBUG((EFI_D_ERROR, "\t- Product serial number: 0x%X%X\n",Cid[1] & 0xFFFFFF,(Cid[0] >> 24) & 0xFF));\r
+ DEBUG((EFI_D_ERROR, "\t- Product revision: %d\n",Cid[1] >> 24));\r
+ //DEBUG((EFI_D_ERROR, "\t- Product name: %s\n",(char*)(Cid + 2)));\r
+ DEBUG((EFI_D_ERROR, "\t- OEM ID: %c%c\n",(Cid[3] >> 8) & 0xFF,(Cid[3] >> 16) & 0xFF));\r
}\r
\r
-VOID PrintCSD(UINT32* csd) {\r
- UINTN val32;\r
- CONST CHAR8* str_unit[] = { "100kbit/s","1Mbit/s","10Mbit/s","100MBit/s","Unkbown","Unkbown","Unkbown","Unkbown" };\r
- CONST CHAR8* str_value[] = { "1.0","1.2","1.3","1.5","2.0","2.5","3.0","3.5","4.0","4.5","5.0","Unknown","Unknown","Unknown","Unknown" };\r
-\r
- if (((csd[2] >> 30) & 0x3) == 0)\r
- DEBUG((EFI_D_ERROR, "- PrintCSD Version 1.01-1.10/Version 2.00/Standard Capacity\n"));\r
- else if (((csd[2] >> 30) & 0x3) == 1)\r
- DEBUG((EFI_D_ERROR, "- PrintCSD Version 2.00/High Capacity\n"));\r
- else\r
- DEBUG((EFI_D_ERROR, "- PrintCSD Version Higher than v3.3\n"));\r
-\r
- DEBUG((EFI_D_ERROR, "\t- Supported card command class: 0x%X\n",MMC_CSD_GET_CCC(csd)));\r
- DEBUG((EFI_D_ERROR, "\t- Speed: %a %a\n",str_value[(MMC_CSD_GET_TRANSPEED(csd) >> 3) & 0xF],str_unit[MMC_CSD_GET_TRANSPEED(csd) & 7]));\r
- DEBUG((EFI_D_ERROR, "\t- Maximum Read Data Block: %d\n",2 << (MMC_CSD_GET_READBLLEN(csd)-1)));\r
- DEBUG((EFI_D_ERROR, "\t- Maximum Write Data Block: %d\n",2 << (MMC_CSD_GET_WRITEBLLEN(csd)-1)));\r
- \r
- if (!MMC_CSD_GET_FILEFORMATGRP(csd)) {\r
- val32 = MMC_CSD_GET_FILEFORMAT(csd);\r
- if (val32 == 0) DEBUG((EFI_D_ERROR, "\t- Format(0): Hard disk-like file system with partition table\n"));\r
- else if (val32 == 1) DEBUG((EFI_D_ERROR, "\t- Format(1): DOS FAT (floppy-like) with boot sector only (no partition table)\n"));\r
- else if (val32 == 2) DEBUG((EFI_D_ERROR, "\t- Format(2): Universal File Format\n"));\r
- else DEBUG((EFI_D_ERROR, "\t- Format(3): Others/Unknown\n"));\r
- } else {\r
- DEBUG((EFI_D_ERROR, "\t- Format: Reserved\n"));\r
- }\r
+VOID\r
+PrintCSD (\r
+ IN UINT32* Csd\r
+ )\r
+{\r
+ UINTN Value;\r
+#if !defined(MDEPKG_NDEBUG)\r
+ CONST CHAR8* str_unit[] = { "100kbit/s","1Mbit/s","10Mbit/s","100MBit/s","Unkbown","Unkbown","Unkbown","Unkbown" };\r
+ CONST CHAR8* str_value[] = { "1.0","1.2","1.3","1.5","2.0","2.5","3.0","3.5","4.0","4.5","5.0","Unknown","Unknown","Unknown","Unknown" };\r
+#endif\r
+\r
+ if (((Csd[2] >> 30) & 0x3) == 0) {\r
+ DEBUG((EFI_D_ERROR, "- PrintCSD Version 1.01-1.10/Version 2.00/Standard Capacity\n"));\r
+ } else if (((Csd[2] >> 30) & 0x3) == 1) {\r
+ DEBUG((EFI_D_ERROR, "- PrintCSD Version 2.00/High Capacity\n"));\r
+ } else {\r
+ DEBUG((EFI_D_ERROR, "- PrintCSD Version Higher than v3.3\n"));\r
+ }\r
+\r
+ DEBUG((EFI_D_ERROR, "\t- Supported card command class: 0x%X\n",MMC_CSD_GET_CCC(Csd)));\r
+ DEBUG((EFI_D_ERROR, "\t- Speed: %a %a\n",str_value[(MMC_CSD_GET_TRANSPEED(Csd) >> 3) & 0xF],str_unit[MMC_CSD_GET_TRANSPEED(Csd) & 7]));\r
+ DEBUG((EFI_D_ERROR, "\t- Maximum Read Data Block: %d\n",2 << (MMC_CSD_GET_READBLLEN(Csd)-1)));\r
+ DEBUG((EFI_D_ERROR, "\t- Maximum Write Data Block: %d\n",2 << (MMC_CSD_GET_WRITEBLLEN(Csd)-1)));\r
+\r
+ if (!MMC_CSD_GET_FILEFORMATGRP(Csd)) {\r
+ Value = MMC_CSD_GET_FILEFORMAT(Csd);\r
+ if (Value == 0) DEBUG((EFI_D_ERROR, "\t- Format(0): Hard disk-like file system with partition table\n"));\r
+ else if (Value == 1) DEBUG((EFI_D_ERROR, "\t- Format(1): DOS FAT (floppy-like) with boot sector only (no partition table)\n"));\r
+ else if (Value == 2) DEBUG((EFI_D_ERROR, "\t- Format(2): Universal File Format\n"));\r
+ else DEBUG((EFI_D_ERROR, "\t- Format(3): Others/Unknown\n"));\r
+ } else {\r
+ DEBUG((EFI_D_ERROR, "\t- Format: Reserved\n"));\r
+ }\r
}\r
\r
-VOID PrintRCA(UINT32 rca) {\r
- DEBUG((EFI_D_ERROR, "- PrintRCA: 0x%X\n",rca));\r
- DEBUG((EFI_D_ERROR, "\t- Status: 0x%X\n",rca & 0xFFFF));\r
- DEBUG((EFI_D_ERROR, "\t- RCA: 0x%X\n",(rca >> 16) & 0xFFFF));\r
+VOID\r
+PrintRCA (\r
+ IN UINT32 Rca\r
+ )\r
+{\r
+ DEBUG((EFI_D_ERROR, "- PrintRCA: 0x%X\n",Rca));\r
+ DEBUG((EFI_D_ERROR, "\t- Status: 0x%X\n",Rca & 0xFFFF));\r
+ DEBUG((EFI_D_ERROR, "\t- RCA: 0x%X\n",(Rca >> 16) & 0xFFFF));\r
}\r
\r
-VOID PrintResponseR1(UINT32 response) {\r
- DEBUG((EFI_D_INFO, "Response: 0x%X\n",response));\r
- if (response & (1 << 8)) DEBUG((EFI_D_INFO, "\t- READY_FOR_DATA\n"));\r
-\r
- if (((response >> 9) & 0xF) == 0) DEBUG((EFI_D_INFO, "\t- State: Idle\n"));\r
- else if (((response >> 9) & 0xF) == 1) DEBUG((EFI_D_INFO, "\t- State: Ready\n"));\r
- else if (((response >> 9) & 0xF) == 2) DEBUG((EFI_D_INFO, "\t- State: Ident\n"));\r
- else if (((response >> 9) & 0xF) == 3) DEBUG((EFI_D_INFO, "\t- State: StandBy\n"));\r
- else if (((response >> 9) & 0xF) == 4) DEBUG((EFI_D_INFO, "\t- State: Tran\n"));\r
- else if (((response >> 9) & 0xF) == 5) DEBUG((EFI_D_INFO, "\t- State: Data\n"));\r
- else if (((response >> 9) & 0xF) == 6) DEBUG((EFI_D_INFO, "\t- State: Rcv\n"));\r
- else if (((response >> 9) & 0xF) == 7) DEBUG((EFI_D_INFO, "\t- State: Prg\n"));\r
- else if (((response >> 9) & 0xF) == 8) DEBUG((EFI_D_INFO, "\t- State: Dis\n"));\r
- else DEBUG((EFI_D_INFO, "\t- State: Reserved\n"));\r
+VOID\r
+PrintResponseR1 (\r
+ IN UINT32 Response\r
+ )\r
+{\r
+ DEBUG((EFI_D_INFO, "Response: 0x%X\n",Response));\r
+ if (Response & (1 << 8)) DEBUG((EFI_D_INFO, "\t- READY_FOR_DATA\n"));\r
+\r
+ if (((Response >> 9) & 0xF) == 0) DEBUG((EFI_D_INFO, "\t- State: Idle\n"));\r
+ else if (((Response >> 9) & 0xF) == 1) DEBUG((EFI_D_INFO, "\t- State: Ready\n"));\r
+ else if (((Response >> 9) & 0xF) == 2) DEBUG((EFI_D_INFO, "\t- State: Ident\n"));\r
+ else if (((Response >> 9) & 0xF) == 3) DEBUG((EFI_D_INFO, "\t- State: StandBy\n"));\r
+ else if (((Response >> 9) & 0xF) == 4) DEBUG((EFI_D_INFO, "\t- State: Tran\n"));\r
+ else if (((Response >> 9) & 0xF) == 5) DEBUG((EFI_D_INFO, "\t- State: Data\n"));\r
+ else if (((Response >> 9) & 0xF) == 6) DEBUG((EFI_D_INFO, "\t- State: Rcv\n"));\r
+ else if (((Response >> 9) & 0xF) == 7) DEBUG((EFI_D_INFO, "\t- State: Prg\n"));\r
+ else if (((Response >> 9) & 0xF) == 8) DEBUG((EFI_D_INFO, "\t- State: Dis\n"));\r
+ else DEBUG((EFI_D_INFO, "\t- State: Reserved\n"));\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcGetCardStatus(\r
- MMC_HOST_INSTANCE *MmcHostInstance\r
- ){\r
- EFI_STATUS Status=EFI_SUCCESS;\r
- UINT32 Response[4];\r
- UINTN CmdArg;\r
- EFI_MMC_HOST_PROTOCOL *MmcHost;\r
-\r
- MmcHost = MmcHostInstance->MmcHost;\r
- CmdArg = 0;\r
-\r
- if (MmcHost == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
- if(MmcHostInstance->State != MmcHwInitializationState){\r
- //Get the Status of the card.\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcGetCardStatus(MMC_CMD13): Error and Status = %r\n", Status));\r
- ASSERT(0);\r
- return Status;\r
- }\r
-\r
- //Read Response\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
- PrintResponseR1(Response[0]);\r
+ IN MMC_HOST_INSTANCE *MmcHostInstance\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ UINT32 Response[4];\r
+ UINTN CmdArg;\r
+ EFI_MMC_HOST_PROTOCOL *MmcHost;\r
+\r
+ Status = EFI_SUCCESS;\r
+ MmcHost = MmcHostInstance->MmcHost;\r
+ CmdArg = 0;\r
+\r
+ if (MmcHost == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+ if(MmcHostInstance->State != MmcHwInitializationState){\r
+ //Get the Status of the card.\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcGetCardStatus(MMC_CMD13): Error and Status = %r\n", Status));\r
+ ASSERT(0);\r
+ return Status;\r
}\r
\r
- return Status;\r
+ //Read Response\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
+ PrintResponseR1(Response[0]);\r
+ }\r
+\r
+ return Status;\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcIdentificationMode (\r
- MMC_HOST_INSTANCE *MmcHostInstance\r
- ) {\r
- EFI_STATUS Status;\r
- UINT32 Response[4];\r
- UINTN Timeout;\r
- UINTN CmdArg;\r
- BOOLEAN bHCS;\r
- EFI_MMC_HOST_PROTOCOL *MmcHost;\r
- UINTN CmdRetryCnt;\r
- \r
- MmcHost = MmcHostInstance->MmcHost;\r
- CmdArg = 0;\r
- bHCS = FALSE;\r
-\r
- if (MmcHost == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // We can get into this function if we restart the identification mode\r
- if (MmcHostInstance->State == MmcHwInitializationState) {\r
- // Initialize the MMC Host HW\r
- Status = MmcNotifyState (MmcHostInstance, MmcHwInitializationState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcHwInitializationState\n"));\r
- return Status;\r
- }\r
- } else {\r
- //Note: Could even be used in all cases. But it looks this command could put the state machine into inactive for some cards\r
- Status = MmcHost->SendCommand(MMC_CMD0, 0);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD0): Error\n"));\r
- return Status;\r
- }\r
+ IN MMC_HOST_INSTANCE *MmcHostInstance\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ UINT32 Response[4];\r
+ UINTN Timeout;\r
+ UINTN CmdArg;\r
+ BOOLEAN IsHCS;\r
+ EFI_MMC_HOST_PROTOCOL *MmcHost;\r
+ UINTN CmdRetryCnt;\r
+\r
+ MmcHost = MmcHostInstance->MmcHost;\r
+ CmdArg = 0;\r
+ IsHCS = FALSE;\r
+\r
+ if (MmcHost == NULL) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ // We can get into this function if we restart the identification mode\r
+ if (MmcHostInstance->State == MmcHwInitializationState) {\r
+ // Initialize the MMC Host HW\r
+ Status = MmcNotifyState (MmcHostInstance, MmcHwInitializationState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcHwInitializationState\n"));\r
+ return Status;\r
}\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcIdleState);\r
+ } else {\r
+ //Note: Could even be used in all cases. But it looks this command could put the state machine into inactive for some cards\r
+ Status = MmcHost->SendCommand(MMC_CMD0, 0);\r
if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdleState\n"));\r
- return Status;\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD0): Error\n"));\r
+ return Status;\r
}\r
-\r
- // Are we using SDIO ?\r
- Status = MmcHost->SendCommand(MMC_CMD5, 0);\r
- if (Status == EFI_SUCCESS) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD5): Error - SDIO not supported.\n"));\r
- return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ Status = MmcNotifyState (MmcHostInstance, MmcIdleState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdleState\n"));\r
+ return Status;\r
+ }\r
+\r
+ // Are we using SDIO ?\r
+ Status = MmcHost->SendCommand(MMC_CMD5, 0);\r
+ if (Status == EFI_SUCCESS) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD5): Error - SDIO not supported.\n"));\r
+ return EFI_UNSUPPORTED;\r
+ }\r
+\r
+ // Check which kind of card we are using. Ver2.00 or later SD Memory Card (PL180 is SD v1.1)\r
+ CmdArg = (0x0UL << 12 | BIT8 | 0xCEUL << 0);\r
+ Status = MmcHost->SendCommand(MMC_CMD8, CmdArg);\r
+ if (Status == EFI_SUCCESS) {\r
+ DEBUG ((EFI_D_ERROR, "Card is SD2.0 => Supports high capacity\n"));\r
+ IsHCS = TRUE;\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R7,Response);\r
+ PrintResponseR1(Response[0]);\r
+ //check if it is valid response\r
+ if(Response[0] != CmdArg){\r
+ DEBUG ((EFI_D_ERROR, "The Card is not usable\n"));\r
+ return EFI_UNSUPPORTED;\r
}\r
-\r
- // Check which kind of card we are using. Ver2.00 or later SD Memory Card (PL180 is SD v1.1)\r
- CmdArg = (0x0UL << 12 | BIT8 | 0xCEUL << 0);\r
- Status = MmcHost->SendCommand(MMC_CMD8, CmdArg);\r
+ } else {\r
+ DEBUG ((EFI_D_ERROR, "Not a SD2.0 Card\n"));\r
+ }\r
+\r
+ // We need to wait for the MMC or SD card is ready => (gCardInfo.OCRData.Busy == 1)\r
+ Timeout = MAX_RETRY_COUNT;\r
+ while (Timeout > 0) {\r
+ // SD Card or MMC Card ? CMD55 indicates to the card that the next command is an application specific command\r
+ Status = MmcHost->SendCommand(MMC_CMD55, 0);\r
if (Status == EFI_SUCCESS) {\r
- DEBUG ((EFI_D_ERROR, "Card is SD2.0 => Supports high capacity\n"));\r
- bHCS = TRUE;\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R7,Response);\r
- PrintResponseR1(Response[0]);\r
- //check if it is valid response\r
- if(Response[0] != CmdArg){\r
- DEBUG ((EFI_D_ERROR, "The Card is not usable\n"));\r
- return EFI_UNSUPPORTED;\r
- }\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "Not a SD2.0 Card\n"));\r
- }\r
-\r
- // We need to wait for the MMC or SD card is ready => (gCardInfo.OCRData.Busy == 1)\r
- Timeout = MAX_RETRY_COUNT;\r
- while (Timeout > 0) {\r
- // SD Card or MMC Card ? CMD55 indicates to the card that the next command is an application specific command\r
- Status = MmcHost->SendCommand(MMC_CMD55, 0);\r
- if (Status == EFI_SUCCESS) {\r
- DEBUG ((EFI_D_INFO, "Card should be SD\n"));\r
- if (bHCS) {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD_2;\r
- } else {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD;\r
- }\r
-\r
- // Note: The first time CmdArg will be zero\r
- CmdArg = ((UINTN *) &(MmcHostInstance->CardInfo.OCRData))[0];\r
- if (bHCS) {\r
- CmdArg |= BIT30;\r
- }\r
- Status = MmcHost->SendCommand(MMC_ACMD41, CmdArg);\r
- if (!EFI_ERROR(Status)) {\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_OCR,Response);\r
- ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
- }\r
+ DEBUG ((EFI_D_INFO, "Card should be SD\n"));\r
+ if (IsHCS) {\r
+ MmcHostInstance->CardInfo.CardType = SD_CARD_2;\r
} else {\r
- DEBUG ((EFI_D_INFO, "Card should be MMC\n"));\r
- MmcHostInstance->CardInfo.CardType = MMC_CARD;\r
-\r
- Status = MmcHost->SendCommand(MMC_CMD1, 0x800000);\r
- if (!EFI_ERROR(Status)) {\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_OCR,Response);\r
- ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
- }\r
+ MmcHostInstance->CardInfo.CardType = SD_CARD;\r
}\r
\r
+ // Note: The first time CmdArg will be zero\r
+ CmdArg = ((UINTN *) &(MmcHostInstance->CardInfo.OCRData))[0];\r
+ if (IsHCS) {\r
+ CmdArg |= BIT30;\r
+ }\r
+ Status = MmcHost->SendCommand(MMC_ACMD41, CmdArg);\r
if (!EFI_ERROR(Status)) {\r
- if (MmcHostInstance->CardInfo.OCRData.Busy == 0) {\r
- MicroSecondDelay(1);\r
- Timeout--;\r
- } else {\r
- if ((MmcHostInstance->CardInfo.CardType == SD_CARD_2) && (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1)) {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD_2_HIGH;\r
- DEBUG ((EFI_D_ERROR, "High capacity card.\n"));\r
- }\r
- break; // The MMC/SD card is ready. Continue the Identification Mode\r
- }\r
- } else {\r
- MicroSecondDelay(1);\r
- Timeout--;\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_OCR,Response);\r
+ ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
}\r
- }\r
-\r
- if (Timeout == 0) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(): No Card\n"));\r
- ASSERT(0);\r
- return EFI_NO_MEDIA;\r
} else {\r
- PrintOCR(Response[0]);\r
- }\r
+ DEBUG ((EFI_D_INFO, "Card should be MMC\n"));\r
+ MmcHostInstance->CardInfo.CardType = MMC_CARD;\r
\r
- Status = MmcNotifyState (MmcHostInstance, MmcReadyState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcReadyState\n"));\r
- return Status;\r
- }\r
-\r
- Status = MmcHost->SendCommand(MMC_CMD2, 0);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD2): Error\n"));\r
- ASSERT(0);\r
- return Status;\r
- }\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_CID,Response);\r
- PrintCID(Response);\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcIdentificationState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdentificationState\n"));\r
- return Status;\r
- }\r
-\r
- CmdArg = 0;\r
- CmdRetryCnt = CMD_RETRY_COUNT;\r
- //Keep sending CMD 3 until card enters to Standby mode and Card status is ready\r
- while((MMC_R0_CURRENTSTATE(Response) != MMC_R0_STATE_STDBY) && CmdRetryCnt-- ){\r
- Status = MmcHost->SendCommand(MMC_CMD3, CmdArg);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD3): Error\n"));\r
- return Status;\r
+ Status = MmcHost->SendCommand(MMC_CMD1, 0x800000);\r
+ if (!EFI_ERROR(Status)) {\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_OCR,Response);\r
+ ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
}\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_RCA,Response);\r
- PrintRCA(Response[0]);\r
}\r
\r
- // For MMC card, RCA is assigned by CMD3 while CMD3 dumps the RCA for SD card\r
- if (MmcHostInstance->CardInfo.CardType != MMC_CARD) {\r
- MmcHostInstance->CardInfo.RCA = Response[0] >> 16;\r
+ if (!EFI_ERROR(Status)) {\r
+ if (MmcHostInstance->CardInfo.OCRData.Busy == 0) {\r
+ MicroSecondDelay(1);\r
+ Timeout--;\r
+ } else {\r
+ if ((MmcHostInstance->CardInfo.CardType == SD_CARD_2) && (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1)) {\r
+ MmcHostInstance->CardInfo.CardType = SD_CARD_2_HIGH;\r
+ DEBUG ((EFI_D_ERROR, "High capacity card.\n"));\r
+ }\r
+ break; // The MMC/SD card is ready. Continue the Identification Mode\r
+ }\r
} else {\r
- MmcHostInstance->CardInfo.RCA = CmdArg;\r
- }\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcStandByState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcStandByState\n"));\r
- return Status;\r
+ MicroSecondDelay(1);\r
+ Timeout--;\r
}\r
-\r
- return EFI_SUCCESS;\r
+ }\r
+\r
+ if (Timeout == 0) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(): No Card\n"));\r
+ ASSERT(0);\r
+ return EFI_NO_MEDIA;\r
+ } else {\r
+ PrintOCR(Response[0]);\r
+ }\r
+\r
+ Status = MmcNotifyState (MmcHostInstance, MmcReadyState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcReadyState\n"));\r
+ return Status;\r
+ }\r
+\r
+ Status = MmcHost->SendCommand(MMC_CMD2, 0);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD2): Error\n"));\r
+ ASSERT(0);\r
+ return Status;\r
+ }\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_CID,Response);\r
+ PrintCID(Response);\r
+\r
+ Status = MmcNotifyState (MmcHostInstance, MmcIdentificationState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdentificationState\n"));\r
+ return Status;\r
+ }\r
+\r
+ //\r
+ // Note, SD specifications say that "if the command execution causes a state change, it\r
+ // will be visible to the host in the response to the next command"\r
+ // The status returned for this CMD3 will be 2 - identification\r
+ //\r
+ CmdArg = 1;\r
+ Status = MmcHost->SendCommand(MMC_CMD3, CmdArg);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD3): Error\n"));\r
+ return Status;\r
+ }\r
+\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_RCA,Response);\r
+ PrintRCA(Response[0]);\r
+\r
+ // For MMC card, RCA is assigned by CMD3 while CMD3 dumps the RCA for SD card\r
+ if (MmcHostInstance->CardInfo.CardType != MMC_CARD) {\r
+ MmcHostInstance->CardInfo.RCA = Response[0] >> 16;\r
+ } else {\r
+ MmcHostInstance->CardInfo.RCA = CmdArg;\r
+ }\r
+\r
+ Status = MmcNotifyState (MmcHostInstance, MmcStandByState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcStandByState\n"));\r
+ return Status;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
MmcReset (\r
IN EFI_BLOCK_IO_PROTOCOL *This,\r
IN BOOLEAN ExtendedVerification\r
- ) {\r
- // Implement me. Either send a CMD0 (could not work for some MMC host) or just turn off/turn\r
- // on power and restart Identification mode\r
+ )\r
+{\r
+ MMC_HOST_INSTANCE *MmcHostInstance;\r
+\r
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(This);\r
+\r
+ if (MmcHostInstance->MmcHost == NULL) {\r
+ // Nothing to do\r
+ return EFI_SUCCESS;\r
+ }\r
+\r
+ // If a card is not present then clear all media settings\r
+ if (!MmcHostInstance->MmcHost->IsCardPresent()) {\r
+ MmcHostInstance->BlockIo.Media->MediaPresent = FALSE;\r
+ MmcHostInstance->BlockIo.Media->LastBlock = 0;\r
+ MmcHostInstance->BlockIo.Media->BlockSize = 512; // Should be zero but there is a bug in DiskIo\r
+ MmcHostInstance->BlockIo.Media->ReadOnly = FALSE;\r
+\r
+ // Indicate that the driver requires initialization\r
+ MmcHostInstance->State = MmcHwInitializationState;\r
+\r
return EFI_SUCCESS;\r
+ }\r
+\r
+ // Implement me. Either send a CMD0 (could not work for some MMC host) or just turn off/turn\r
+ // on power and restart Identification mode\r
+ return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
EFI_MMC_HOST_PROTOCOL *MmcHost\r
)\r
{\r
- if (!MmcHost->IsCardPresent()) {\r
- return EFI_NO_MEDIA;\r
- } else {\r
- return EFI_SUCCESS;\r
- }\r
+ if (!MmcHost->IsCardPresent()) {\r
+ return EFI_NO_MEDIA;\r
+ } else {\r
+ return EFI_SUCCESS;\r
+ }\r
}\r
\r
#define MMCI0_BLOCKLEN 512\r
#define MMCI0_TIMEOUT 10000\r
\r
-EFI_STATUS MmcIoBlocks (\r
+EFI_STATUS\r
+MmcIoBlocks (\r
IN EFI_BLOCK_IO_PROTOCOL *This,\r
IN UINTN Transfer,\r
IN UINT32 MediaId,\r
IN EFI_LBA Lba,\r
IN UINTN BufferSize,\r
OUT VOID *Buffer\r
- ) {\r
- UINT32 Response[4];\r
- EFI_STATUS Status;\r
- UINTN CardSize, NumBlocks, BlockSize, CmdArg;\r
- UINTN Timeout;\r
- UINTN Cmd;\r
- MMC_HOST_INSTANCE *MmcHostInstance;\r
- EFI_MMC_HOST_PROTOCOL *MmcHost;\r
- UINTN BytesRemainingToBeTransfered;\r
- UINTN BlockCount = 1;\r
-\r
- MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(This);\r
- ASSERT(MmcHostInstance != 0);\r
- MmcHost = MmcHostInstance->MmcHost;\r
- ASSERT(MmcHost);\r
-\r
- if (MmcHost == 0) {\r
- return EFI_INVALID_PARAMETER;\r
+ )\r
+{\r
+ UINT32 Response[4];\r
+ EFI_STATUS Status;\r
+ UINTN CardSize, NumBlocks, BlockSize, CmdArg;\r
+ INTN Timeout;\r
+ UINTN Cmd;\r
+ MMC_HOST_INSTANCE *MmcHostInstance;\r
+ EFI_MMC_HOST_PROTOCOL *MmcHost;\r
+ UINTN BytesRemainingToBeTransfered;\r
+ UINTN BlockCount = 1;\r
+\r
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS(This);\r
+ ASSERT(MmcHostInstance != 0);\r
+ MmcHost = MmcHostInstance->MmcHost;\r
+ ASSERT(MmcHost);\r
+\r
+ if ((MmcHost == 0)|| (Buffer == NULL)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ // Check if a Card is Present\r
+ if (!MmcHostInstance->BlockIo.Media->MediaPresent) {\r
+ return EFI_NO_MEDIA;\r
+ }\r
+\r
+ // If the driver has not been initialized yet then go into Identification Mode\r
+ if (MmcHostInstance->State == MmcHwInitializationState) {\r
+ MmcIdentificationMode (MmcHostInstance);\r
+\r
+ //Send a command to get Card specific data\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Status = MmcHost->SendCommand(MMC_CMD9, CmdArg);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD9): Error, Status=%r\n", Status));\r
+ ASSERT(0);\r
+ return Status;\r
}\r
-\r
- // Check if a Card is Present\r
- if (!MmcHost->IsCardPresent()) {\r
- MmcHostInstance->BlockIo.Media->MediaPresent = FALSE;\r
- MmcHostInstance->BlockIo.Media->LastBlock = 0;\r
- MmcHostInstance->BlockIo.Media->BlockSize = 512; // Should be zero but there is a bug in DiskIo\r
- MmcHostInstance->BlockIo.Media->ReadOnly = FALSE; \r
- return EFI_NO_MEDIA;\r
+ //Read Response\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_CSD,Response);\r
+ PrintCSD(Response);\r
+\r
+ if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {\r
+ ASSERT(0); //TODO: Implementation needed\r
+ CardSize = MMC_CSD_GET_DEVICESIZE(Response);\r
+ NumBlocks = ((CardSize + 1) * 1024);;\r
+ BlockSize = 1 << MMC_CSD_GET_READBLLEN(Response);\r
+ } else {\r
+ CardSize = MMC_CSD_GET_DEVICESIZE(Response);\r
+ NumBlocks = (CardSize + 1) * (1 << (MMC_CSD_GET_DEVICESIZEMULT(Response) + 2));\r
+ BlockSize = 1 << MMC_CSD_GET_READBLLEN(Response);\r
}\r
\r
- // If the driver has not been initialized yet then go into Iddentification Mode\r
- if (MmcHostInstance->State == MmcHwInitializationState) {\r
- MmcIdentificationMode (MmcHostInstance);\r
-\r
- //Send a command to get Card specific data\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Status = MmcHost->SendCommand(MMC_CMD9, CmdArg);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD9): Error, Status=%r\n", Status));\r
- ASSERT(0);\r
- return Status;\r
- }\r
- //Read Response\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_CSD,Response);\r
- PrintCSD(Response);\r
-\r
- if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {\r
- ASSERT(0); //TODO: Implementation needed\r
- CardSize = MMC_CSD_GET_DEVICESIZE(Response);\r
- NumBlocks = ((CardSize + 1) * 1024);;\r
- BlockSize = 1 << MMC_CSD_GET_READBLLEN(Response);\r
- } else {\r
- CardSize = MMC_CSD_GET_DEVICESIZE(Response);\r
- NumBlocks = (CardSize + 1) * (1 << (MMC_CSD_GET_DEVICESIZEMULT(Response) + 2));\r
- BlockSize = 1 << MMC_CSD_GET_READBLLEN(Response);\r
- }\r
-\r
- //For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.\r
- if (BlockSize > 512) {\r
- NumBlocks = MultU64x32(NumBlocks, BlockSize/512);\r
- BlockSize = 512; \r
- }\r
+ //For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.\r
+ if (BlockSize > 512) {\r
+ NumBlocks = MultU64x32(NumBlocks, BlockSize/512);\r
+ BlockSize = 512;\r
+ }\r
\r
- MmcHostInstance->BlockIo.Media->LastBlock = (NumBlocks - 1);\r
- MmcHostInstance->BlockIo.Media->BlockSize = BlockSize;\r
- MmcHostInstance->BlockIo.Media->ReadOnly = MmcHost->IsReadOnly();\r
- MmcHostInstance->BlockIo.Media->MediaPresent = TRUE; \r
- MmcHostInstance->BlockIo.Media->MediaId++; \r
-\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Status = MmcHost->SendCommand(MMC_CMD7, CmdArg);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD7): Error and Status = %r\n", Status));\r
- ASSERT(0);\r
- return Status;\r
- }\r
+ MmcHostInstance->BlockIo.Media->LastBlock = (NumBlocks - 1);\r
+ MmcHostInstance->BlockIo.Media->BlockSize = BlockSize;\r
+ MmcHostInstance->BlockIo.Media->ReadOnly = MmcHost->IsReadOnly();\r
+ MmcHostInstance->BlockIo.Media->MediaPresent = TRUE;\r
+ MmcHostInstance->BlockIo.Media->MediaId++;\r
\r
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcTransferState\n"));\r
- return Status;\r
- }\r
- } else {\r
- // Maybe test if the card has changed to update gMmcMedia information\r
- if (MmcHostInstance->State == MmcTransferState) {\r
- //DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : MmcTransferState\n"));\r
- } else if (MmcHostInstance->State == MmcStandByState) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : MmcStandByState\n"));\r
- } else {\r
- ASSERT(0);\r
- }\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Status = MmcHost->SendCommand(MMC_CMD7, CmdArg);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD7): Error and Status = %r\n", Status));\r
+ ASSERT(0);\r
+ return Status;\r
}\r
\r
- if (Lba > This->Media->LastBlock) {\r
- ASSERT(0);\r
- return EFI_INVALID_PARAMETER;\r
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcTransferState\n"));\r
+ return Status;\r
+ }\r
+ } else {\r
+ // Maybe test if the card has changed to update gMmcMedia information\r
+ if (MmcHostInstance->State == MmcTransferState) {\r
+ //DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : MmcTransferState\n"));\r
+ } else if (MmcHostInstance->State == MmcStandByState) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : MmcStandByState\n"));\r
+ } else {\r
+ ASSERT(0);\r
}\r
- \r
- if ((BufferSize % This->Media->BlockSize) != 0) {\r
- ASSERT(0);\r
- return EFI_BAD_BUFFER_SIZE;\r
+ }\r
+\r
+ // All blocks must be within the device\r
+ if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)){\r
+ ASSERT(0);\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ // The buffer size must not be zero and it must be an exact multiple of the block size\r
+ if ((BufferSize == 0) || ((BufferSize % This->Media->BlockSize) != 0)) {\r
+ ASSERT(0);\r
+ return EFI_BAD_BUFFER_SIZE;\r
+ }\r
+\r
+ if (This->Media->MediaId != MediaId) {\r
+ return EFI_MEDIA_CHANGED;\r
+ }\r
+\r
+ if((Transfer == MMC_IOBLOCKS_WRITE) && (This->Media->ReadOnly == TRUE)) {\r
+ return EFI_WRITE_PROTECTED;\r
+ }\r
+\r
+ BytesRemainingToBeTransfered = BufferSize;\r
+ while (BytesRemainingToBeTransfered > 0) {\r
+\r
+ // Check if the Card is in Ready status\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Response[0] = 0;\r
+ Timeout = 20;\r
+ while(!(Response[0] & MMC_R0_READY_FOR_DATA) && (MMC_R0_CURRENTSTATE(Response) != MMC_R0_STATE_TRAN) && Timeout--) {\r
+ Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
+ if (!EFI_ERROR(Status)) {\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
+ }\r
}\r
\r
- BytesRemainingToBeTransfered = BufferSize;\r
- while (BytesRemainingToBeTransfered > 0) {\r
-\r
- //Check if the Card is in Ready status\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Response[0] = 0;\r
- Timeout = 20;\r
- while(!(Response[0] & MMC_R0_READY_FOR_DATA) && (MMC_R0_CURRENTSTATE(Response) != MMC_R0_STATE_TRAN) && Timeout--) {\r
- Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
- if (!EFI_ERROR(Status)){\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
- }\r
- }\r
-\r
- if (0 == Timeout) {\r
- DEBUG((EFI_D_ERROR, "The Card is busy\n"));\r
- return EFI_NOT_READY;\r
+ if (0 == Timeout) {\r
+ DEBUG((EFI_D_ERROR, "The Card is busy\n"));\r
+ return EFI_NOT_READY;\r
}\r
\r
- // Set Block Length\r
- Status = MmcHost->SendCommand(MMC_CMD16, This->Media->BlockSize);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD16): Error This->Media->BlockSize:%d and Error = %r\n",This->Media->BlockSize, Status));\r
- return Status;\r
- }\r
+ // Set Block Length\r
+ Status = MmcHost->SendCommand(MMC_CMD16, This->Media->BlockSize);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD16): Error This->Media->BlockSize:%d and Error = %r\n",This->Media->BlockSize, Status));\r
+ return Status;\r
+ }\r
\r
- // Block Count (not used). Could return an error for SD card\r
- MmcHost->SendCommand(MMC_CMD23, BlockCount);\r
+ // Block Count (not used). Could return an error for SD card\r
+ MmcHost->SendCommand(MMC_CMD23, BlockCount);\r
\r
- //Set command argument based on the card access mode (Byte mode or Block mode)\r
- if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {\r
- CmdArg = Lba;\r
- } else {\r
- CmdArg = Lba * This->Media->BlockSize;\r
- }\r
+ //Set command argument based on the card access mode (Byte mode or Block mode)\r
+ if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {\r
+ CmdArg = Lba;\r
+ } else {\r
+ CmdArg = Lba * This->Media->BlockSize;\r
+ }\r
\r
- if (Transfer == MMC_IOBLOCKS_READ) {\r
+ if (Transfer == MMC_IOBLOCKS_READ) {\r
#ifndef USE_STREAM\r
- // Read a single block\r
- Cmd = MMC_CMD17;\r
+ // Read a single block\r
+ Cmd = MMC_CMD17;\r
#else\r
- //TODO: Should we support read stream (MMC_CMD11)\r
+ //TODO: Should we support read stream (MMC_CMD11)\r
#endif\r
- } else {\r
+ } else {\r
#ifndef USE_STREAM\r
- // Write a single block\r
- Cmd = MMC_CMD24;\r
+ // Write a single block\r
+ Cmd = MMC_CMD24;\r
#else\r
- //TODO: Should we support write stream (MMC_CMD20)\r
+ //TODO: Should we support write stream (MMC_CMD20)\r
#endif\r
- }\r
- Status = MmcHost->SendCommand(Cmd, CmdArg);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD%d): Error %r\n",Cmd, Status));\r
- return Status;\r
- }\r
+ }\r
+ Status = MmcHost->SendCommand(Cmd, CmdArg);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD%d): Error %r\n",Cmd, Status));\r
+ return Status;\r
+ }\r
\r
- if (Transfer == MMC_IOBLOCKS_READ) {\r
+ if (Transfer == MMC_IOBLOCKS_READ) {\r
#ifndef USE_STREAM\r
- // Read one block of Data\r
- Status = MmcHost->ReadBlockData(Lba,This->Media->BlockSize,Buffer);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_BLKIO, "MmcIdentificationMode(): Error Read Block Data and Status = %r\n", Status));\r
- return Status;\r
- }\r
+ // Read one block of Data\r
+ Status = MmcHost->ReadBlockData(Lba,This->Media->BlockSize,Buffer);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_BLKIO, "MmcIdentificationMode(): Error Read Block Data and Status = %r\n", Status));\r
+ return Status;\r
+ }\r
#else\r
- //TODO: Read a steam\r
- ASSERT(0);\r
+ //TODO: Read a steam\r
+ ASSERT(0);\r
#endif\r
- Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcProgrammingState\n"));\r
- return Status;\r
- }\r
- } else {\r
+ Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcProgrammingState\n"));\r
+ return Status;\r
+ }\r
+ } else {\r
#ifndef USE_STREAM\r
- // Write one block of Data\r
- Status = MmcHost->WriteBlockData(Lba,This->Media->BlockSize,Buffer);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_BLKIO, "MmcIdentificationMode(): Error Write Block Data and Status = %r\n", Status));\r
- return Status;\r
- }\r
+ // Write one block of Data\r
+ Status = MmcHost->WriteBlockData(Lba,This->Media->BlockSize,Buffer);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_BLKIO, "MmcIdentificationMode(): Error Write Block Data and Status = %r\n", Status));\r
+ return Status;\r
+ }\r
#else\r
- //TODO: Write a steam\r
- ASSERT(0);\r
+ //TODO: Write a steam\r
+ ASSERT(0);\r
#endif\r
- }\r
+ }\r
\r
- // Command 12 - Stop transmission (ends read)\r
- Status = MmcHost->SendCommand(MMC_CMD12, 0);\r
- if (!EFI_ERROR(Status)) {\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1b,Response);\r
- }\r
-\r
- // Command 13 - Read status and wait for programming to complete (return to tran)\r
- Timeout = MMCI0_TIMEOUT;\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Response[0] = 0;\r
- while(!(Response[0] & MMC_R0_READY_FOR_DATA) && (MMC_R0_CURRENTSTATE(Response) != MMC_R0_STATE_TRAN) && Timeout--) {\r
- Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
- if (!EFI_ERROR(Status)) {\r
- MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
- }\r
- NanoSecondDelay(100);\r
- Timeout--;\r
- }\r
+ // Command 12 - Stop transmission (ends read)\r
+ Status = MmcHost->SendCommand(MMC_CMD12, 0);\r
+ if (!EFI_ERROR(Status)) {\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1b,Response);\r
+ }\r
\r
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
- if (EFI_ERROR(Status)) {\r
- DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcTransferState\n"));\r
- return Status;\r
- }\r
+ // Command 13 - Read status and wait for programming to complete (return to tran)\r
+ Timeout = MMCI0_TIMEOUT;\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Response[0] = 0;\r
+ while(!(Response[0] & MMC_R0_READY_FOR_DATA) && (MMC_R0_CURRENTSTATE(Response) != MMC_R0_STATE_TRAN) && Timeout--) {\r
+ Status = MmcHost->SendCommand(MMC_CMD13, CmdArg);\r
+ if (!EFI_ERROR(Status)) {\r
+ MmcHost->ReceiveResponse(MMC_RESPONSE_TYPE_R1,Response);\r
+ }\r
+ NanoSecondDelay(100);\r
+ Timeout--;\r
+ }\r
\r
- BytesRemainingToBeTransfered -= This->Media->BlockSize;\r
- Lba += BlockCount;\r
- Buffer = (UINT8 *)Buffer + This->Media->BlockSize;\r
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
+ if (EFI_ERROR(Status)) {\r
+ DEBUG((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcTransferState\n"));\r
+ return Status;\r
}\r
\r
- return EFI_SUCCESS;\r
+ BytesRemainingToBeTransfered -= This->Media->BlockSize;\r
+ Lba += BlockCount;\r
+ Buffer = (UINT8 *)Buffer + This->Media->BlockSize;\r
+ }\r
+\r
+ return EFI_SUCCESS;\r
}\r
\r
EFI_STATUS\r
IN EFI_LBA Lba,\r
IN UINTN BufferSize,\r
OUT VOID *Buffer\r
- ) {\r
- return MmcIoBlocks (This, MMC_IOBLOCKS_READ, MediaId, Lba, BufferSize, Buffer);\r
+ )\r
+{\r
+ return MmcIoBlocks (This, MMC_IOBLOCKS_READ, MediaId, Lba, BufferSize, Buffer);\r
}\r
\r
EFI_STATUS\r
IN EFI_LBA Lba,\r
IN UINTN BufferSize,\r
IN VOID *Buffer\r
- ) {\r
- return MmcIoBlocks (This, MMC_IOBLOCKS_WRITE, MediaId, Lba, BufferSize, Buffer);\r
+ )\r
+{\r
+ return MmcIoBlocks (This, MMC_IOBLOCKS_WRITE, MediaId, Lba, BufferSize, Buffer);\r
}\r
\r
EFI_STATUS\r
EFIAPI\r
MmcFlushBlocks (\r
IN EFI_BLOCK_IO_PROTOCOL *This\r
- ) {\r
- return EFI_SUCCESS;\r
+ )\r
+{\r
+ return EFI_SUCCESS;\r
}\r
\r
projects / mirror_edk2.git / blobdiff