/** @file\r
*\r
-* Copyright (c) 2011-2013, ARM Limited. All rights reserved.\r
+* Copyright (c) 2011-2015, ARM Limited. All rights reserved.\r
*\r
* This program and the accompanying materials\r
* are licensed and made available under the terms and conditions of the BSD License\r
*\r
**/\r
\r
-#include <Protocol/MmcHost.h>\r
-#include <Library/DebugLib.h>\r
#include <Library/BaseMemoryLib.h>\r
-#include <Library/TimerLib.h>\r
\r
#include "Mmc.h"\r
\r
-#define MAX_RETRY_COUNT 1000\r
-#define CMD_RETRY_COUNT 20\r
-\r
EFI_STATUS\r
MmcNotifyState (\r
IN MMC_HOST_INSTANCE *MmcHostInstance,\r
return MmcHostInstance->MmcHost->NotifyState (MmcHostInstance->MmcHost, State);\r
}\r
\r
-VOID\r
-PrintOCR (\r
- IN UINT32 Ocr\r
- )\r
-{\r
- UINTN MinV;\r
- UINTN MaxV;\r
- UINTN Volts;\r
- UINTN Loop;\r
-\r
- MinV = 36; // 3.6\r
- MaxV = 20; // 2.0\r
- Volts = 20; // 2.0\r
-\r
- // The MMC register bits [23:8] indicate the working range of the card\r
- for (Loop = 8; Loop < 24; Loop++) {\r
- if (Ocr & (1 << Loop)) {\r
- if (MinV > Volts) MinV = Volts;\r
- if (MaxV < Volts) MaxV = Volts + 1;\r
- }\r
- Volts = Volts + 1;\r
- }\r
-\r
- DEBUG ((EFI_D_ERROR, "- PrintOCR Ocr (0x%X)\n",Ocr));\r
- DEBUG ((EFI_D_ERROR, "\t- Card operating voltage: %d.%d to %d.%d\n", MinV/10, MinV % 10, MaxV/10, MaxV % 10));\r
- if (((Ocr >> 29) & 3) == 0) {\r
- DEBUG ((EFI_D_ERROR, "\t- AccessMode: Byte Mode\n"));\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "\t- AccessMode: Block Mode (0x%X)\n", ((Ocr >> 29) & 3)));\r
- }\r
-\r
- if (Ocr & MMC_OCR_POWERUP) {\r
- DEBUG ((EFI_D_ERROR, "\t- PowerUp\n"));\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "\t- Voltage Not Supported\n"));\r
- }\r
-}\r
-\r
-VOID PrintCID (\r
- IN UINT32* Cid\r
- )\r
-{\r
- DEBUG ((EFI_D_ERROR, "- PrintCID\n"));\r
- DEBUG ((EFI_D_ERROR, "\t- Manufacturing date: %d/%d\n", (Cid[0] >> 8) & 0xF, (Cid[0] >> 12) & 0xFF));\r
- DEBUG ((EFI_D_ERROR, "\t- Product serial number: 0x%X%X\n", Cid[1] & 0xFFFFFF, (Cid[0] >> 24) & 0xFF));\r
- DEBUG ((EFI_D_ERROR, "\t- Product revision: %d\n", Cid[1] >> 24));\r
- //DEBUG ((EFI_D_ERROR, "\t- Product name: %s\n", (char*)(Cid + 2)));\r
- DEBUG ((EFI_D_ERROR, "\t- OEM ID: %c%c\n", (Cid[3] >> 8) & 0xFF, (Cid[3] >> 16) & 0xFF));\r
-}\r
-\r
-#if !defined(MDEPKG_NDEBUG)\r
-CONST CHAR8* mStrUnit[] = { "100kbit/s", "1Mbit/s", "10Mbit/s", "100MBit/s",\r
- "Unknown", "Unknown", "Unknown", "Unknown" };\r
-CONST CHAR8* mStrValue[] = { "1.0", "1.2", "1.3", "1.5", "2.0", "2.5", "3.0", "3.5", "4.0", "4.5", "5.0",\r
- "Unknown", "Unknown", "Unknown", "Unknown" };\r
-#endif\r
-\r
-VOID\r
-PrintCSD (\r
- IN UINT32* Csd\r
- )\r
-{\r
- UINTN Value;\r
-\r
- if (((Csd[2] >> 30) & 0x3) == 0) {\r
- DEBUG ((EFI_D_ERROR, "- PrintCSD Version 1.01-1.10/Version 2.00/Standard Capacity\n"));\r
- } else if (((Csd[2] >> 30) & 0x3) == 1) {\r
- DEBUG ((EFI_D_ERROR, "- PrintCSD Version 2.00/High Capacity\n"));\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "- PrintCSD Version Higher than v3.3\n"));\r
- }\r
-\r
- DEBUG ((EFI_D_ERROR, "\t- Supported card command class: 0x%X\n", MMC_CSD_GET_CCC(Csd)));\r
- DEBUG ((EFI_D_ERROR, "\t- Speed: %a %a\n",mStrValue[(MMC_CSD_GET_TRANSPEED(Csd) >> 3) & 0xF],mStrUnit[MMC_CSD_GET_TRANSPEED(Csd) & 7]));\r
- DEBUG ((EFI_D_ERROR, "\t- Maximum Read Data Block: %d\n",2 << (MMC_CSD_GET_READBLLEN(Csd)-1)));\r
- DEBUG ((EFI_D_ERROR, "\t- Maximum Write Data Block: %d\n",2 << (MMC_CSD_GET_WRITEBLLEN(Csd)-1)));\r
-\r
- if (!MMC_CSD_GET_FILEFORMATGRP (Csd)) {\r
- Value = MMC_CSD_GET_FILEFORMAT (Csd);\r
- if (Value == 0) DEBUG ((EFI_D_ERROR, "\t- Format (0): Hard disk-like file system with partition table\n"));\r
- else if (Value == 1) DEBUG ((EFI_D_ERROR, "\t- Format (1): DOS FAT (floppy-like) with boot sector only (no partition table)\n"));\r
- else if (Value == 2) DEBUG ((EFI_D_ERROR, "\t- Format (2): Universal File Format\n"));\r
- else DEBUG ((EFI_D_ERROR, "\t- Format (3): Others/Unknown\n"));\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "\t- Format: Reserved\n"));\r
- }\r
-}\r
-\r
-VOID\r
-PrintRCA (\r
- IN UINT32 Rca\r
- )\r
-{\r
- DEBUG ((EFI_D_ERROR, "- PrintRCA: 0x%X\n", Rca));\r
- DEBUG ((EFI_D_ERROR, "\t- Status: 0x%X\n", Rca & 0xFFFF));\r
- DEBUG ((EFI_D_ERROR, "\t- RCA: 0x%X\n", (Rca >> 16) & 0xFFFF));\r
-}\r
-\r
-VOID\r
-PrintResponseR1 (\r
- IN UINT32 Response\r
- )\r
-{\r
- DEBUG ((EFI_D_INFO, "Response: 0x%X\n", Response));\r
- if (Response & MMC_R0_READY_FOR_DATA) {\r
- DEBUG ((EFI_D_INFO, "\t- READY_FOR_DATA\n"));\r
- }\r
-\r
- if (((Response >> 9) & 0xF) == 0) DEBUG ((EFI_D_INFO, "\t- State: Idle\n"));\r
- else if (((Response >> 9) & 0xF) == 1) DEBUG ((EFI_D_INFO, "\t- State: Ready\n"));\r
- else if (((Response >> 9) & 0xF) == 2) DEBUG ((EFI_D_INFO, "\t- State: Ident\n"));\r
- else if (((Response >> 9) & 0xF) == 3) DEBUG ((EFI_D_INFO, "\t- State: StandBy\n"));\r
- else if (((Response >> 9) & 0xF) == 4) DEBUG ((EFI_D_INFO, "\t- State: Tran\n"));\r
- else if (((Response >> 9) & 0xF) == 5) DEBUG ((EFI_D_INFO, "\t- State: Data\n"));\r
- else if (((Response >> 9) & 0xF) == 6) DEBUG ((EFI_D_INFO, "\t- State: Rcv\n"));\r
- else if (((Response >> 9) & 0xF) == 7) DEBUG ((EFI_D_INFO, "\t- State: Prg\n"));\r
- else if (((Response >> 9) & 0xF) == 8) DEBUG ((EFI_D_INFO, "\t- State: Dis\n"));\r
- else DEBUG ((EFI_D_INFO, "\t- State: Reserved\n"));\r
-}\r
-\r
EFI_STATUS\r
EFIAPI\r
MmcGetCardStatus (\r
- IN MMC_HOST_INSTANCE *MmcHostInstance\r
+ IN MMC_HOST_INSTANCE *MmcHostInstance\r
)\r
{\r
EFI_STATUS Status;\r
return Status;\r
}\r
\r
-EFI_STATUS\r
-EFIAPI\r
-MmcIdentificationMode (\r
- IN MMC_HOST_INSTANCE *MmcHostInstance\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINT32 Response[4];\r
- UINTN Timeout;\r
- UINTN CmdArg;\r
- BOOLEAN IsHCS;\r
- EFI_MMC_HOST_PROTOCOL *MmcHost;\r
-\r
- MmcHost = MmcHostInstance->MmcHost;\r
- CmdArg = 0;\r
- IsHCS = FALSE;\r
-\r
- if (MmcHost == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- // We can get into this function if we restart the identification mode\r
- if (MmcHostInstance->State == MmcHwInitializationState) {\r
- // Initialize the MMC Host HW\r
- Status = MmcNotifyState (MmcHostInstance, MmcHwInitializationState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcHwInitializationState\n"));\r
- return Status;\r
- }\r
- }\r
-\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD0, 0);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD0): Error\n"));\r
- return Status;\r
- }\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcIdleState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdleState\n"));\r
- return Status;\r
- }\r
-\r
- // Are we using SDIO ?\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD5, 0);\r
- if (Status == EFI_SUCCESS) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD5): Error - SDIO not supported.\n"));\r
- return EFI_UNSUPPORTED;\r
- }\r
-\r
- // Check which kind of card we are using. Ver2.00 or later SD Memory Card (PL180 is SD v1.1)\r
- CmdArg = (0x0UL << 12 | BIT8 | 0xCEUL << 0);\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD8, CmdArg);\r
- if (Status == EFI_SUCCESS) {\r
- DEBUG ((EFI_D_ERROR, "Card is SD2.0 => Supports high capacity\n"));\r
- IsHCS = TRUE;\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R7, Response);\r
- PrintResponseR1 (Response[0]);\r
- //check if it is valid response\r
- if (Response[0] != CmdArg) {\r
- DEBUG ((EFI_D_ERROR, "The Card is not usable\n"));\r
- return EFI_UNSUPPORTED;\r
- }\r
- } else {\r
- DEBUG ((EFI_D_ERROR, "Not a SD2.0 Card\n"));\r
- }\r
-\r
- // We need to wait for the MMC or SD card is ready => (gCardInfo.OCRData.PowerUp == 1)\r
- Timeout = MAX_RETRY_COUNT;\r
- while (Timeout > 0) {\r
- // SD Card or MMC Card ? CMD55 indicates to the card that the next command is an application specific command\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD55, 0);\r
- if (Status == EFI_SUCCESS) {\r
- DEBUG ((EFI_D_INFO, "Card should be SD\n"));\r
- if (IsHCS) {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD_2;\r
- } else {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD;\r
- }\r
-\r
- // Note: The first time CmdArg will be zero\r
- CmdArg = ((UINTN *) &(MmcHostInstance->CardInfo.OCRData))[0];\r
- if (IsHCS) {\r
- CmdArg |= BIT30;\r
- }\r
- Status = MmcHost->SendCommand (MmcHost, MMC_ACMD41, CmdArg);\r
- if (!EFI_ERROR (Status)) {\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);\r
- ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
- }\r
- } else {\r
- DEBUG ((EFI_D_INFO, "Card should be MMC\n"));\r
- MmcHostInstance->CardInfo.CardType = MMC_CARD;\r
-\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD1, 0x800000);\r
- if (!EFI_ERROR (Status)) {\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_OCR, Response);\r
- ((UINT32 *) &(MmcHostInstance->CardInfo.OCRData))[0] = Response[0];\r
- }\r
- }\r
-\r
- if (!EFI_ERROR (Status)) {\r
- if (!MmcHostInstance->CardInfo.OCRData.PowerUp) {\r
- MicroSecondDelay (1);\r
- Timeout--;\r
- } else {\r
- if ((MmcHostInstance->CardInfo.CardType == SD_CARD_2) && (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1)) {\r
- MmcHostInstance->CardInfo.CardType = SD_CARD_2_HIGH;\r
- DEBUG ((EFI_D_ERROR, "High capacity card.\n"));\r
- }\r
- break; // The MMC/SD card is ready. Continue the Identification Mode\r
- }\r
- } else {\r
- MicroSecondDelay (1);\r
- Timeout--;\r
- }\r
- }\r
-\r
- if (Timeout == 0) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(): No Card\n"));\r
- return EFI_NO_MEDIA;\r
- } else {\r
- PrintOCR (Response[0]);\r
- }\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcReadyState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcReadyState\n"));\r
- return Status;\r
- }\r
-\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD2, 0);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD2): Error\n"));\r
- return Status;\r
- }\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CID, Response);\r
- PrintCID (Response);\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcIdentificationState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcIdentificationState\n"));\r
- return Status;\r
- }\r
-\r
- //\r
- // Note, SD specifications say that "if the command execution causes a state change, it\r
- // will be visible to the host in the response to the next command"\r
- // The status returned for this CMD3 will be 2 - identification\r
- //\r
- CmdArg = 1;\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD3, CmdArg);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode(MMC_CMD3): Error\n"));\r
- return Status;\r
- }\r
-\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_RCA, Response);\r
- PrintRCA (Response[0]);\r
-\r
- // For MMC card, RCA is assigned by CMD3 while CMD3 dumps the RCA for SD card\r
- if (MmcHostInstance->CardInfo.CardType != MMC_CARD) {\r
- MmcHostInstance->CardInfo.RCA = Response[0] >> 16;\r
- } else {\r
- MmcHostInstance->CardInfo.RCA = CmdArg;\r
- }\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcStandByState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIdentificationMode() : Error MmcStandByState\n"));\r
- return Status;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-EFI_STATUS InitializeMmcDevice (\r
- IN MMC_HOST_INSTANCE *MmcHostInstance\r
- )\r
-{\r
- UINT32 Response[4];\r
- EFI_STATUS Status;\r
- UINTN CardSize, NumBlocks, BlockSize, CmdArg;\r
- EFI_MMC_HOST_PROTOCOL *MmcHost;\r
- UINTN BlockCount;\r
-\r
- BlockCount = 1;\r
- MmcHost = MmcHostInstance->MmcHost;\r
-\r
- MmcIdentificationMode (MmcHostInstance);\r
-\r
- //Send a command to get Card specific data\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD9, CmdArg);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG((EFI_D_ERROR, "InitializeMmcDevice(MMC_CMD9): Error, Status=%r\n", Status));\r
- return Status;\r
- }\r
- //Read Response\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_CSD, Response);\r
- PrintCSD (Response);\r
-\r
- if (MmcHostInstance->CardInfo.CardType == SD_CARD_2_HIGH) {\r
- CardSize = HC_MMC_CSD_GET_DEVICESIZE (Response);\r
- NumBlocks = ((CardSize + 1) * 1024);\r
- BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);\r
- } else {\r
- CardSize = MMC_CSD_GET_DEVICESIZE (Response);\r
- NumBlocks = (CardSize + 1) * (1 << (MMC_CSD_GET_DEVICESIZEMULT (Response) + 2));\r
- BlockSize = 1 << MMC_CSD_GET_READBLLEN (Response);\r
- }\r
-\r
- //For >=2G card, BlockSize may be 1K, but the transfer size is 512 bytes.\r
- if (BlockSize > 512) {\r
- NumBlocks = MultU64x32 (NumBlocks, BlockSize/512);\r
- BlockSize = 512;\r
- }\r
-\r
- MmcHostInstance->BlockIo.Media->LastBlock = (NumBlocks - 1);\r
- MmcHostInstance->BlockIo.Media->BlockSize = BlockSize;\r
- MmcHostInstance->BlockIo.Media->ReadOnly = MmcHost->IsReadOnly (MmcHost);\r
- MmcHostInstance->BlockIo.Media->MediaPresent = TRUE;\r
- MmcHostInstance->BlockIo.Media->MediaId++;\r
-\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD7, CmdArg);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG((EFI_D_ERROR, "InitializeMmcDevice(MMC_CMD7): Error and Status = %r\n", Status));\r
- return Status;\r
- }\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG((EFI_D_ERROR, "InitializeMmcDevice(): Error MmcTransferState\n"));\r
- return Status;\r
- }\r
-\r
- // Set Block Length\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD16, MmcHostInstance->BlockIo.Media->BlockSize);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG((EFI_D_ERROR, "InitializeMmcDevice(MMC_CMD16): Error MmcHostInstance->BlockIo.Media->BlockSize: %d and Error = %r\n",\r
- MmcHostInstance->BlockIo.Media->BlockSize, Status));\r
- return Status;\r
- }\r
-\r
- // Block Count (not used). Could return an error for SD card\r
- if (MmcHostInstance->CardInfo.CardType == MMC_CARD) {\r
- MmcHost->SendCommand (MmcHost, MMC_CMD23, BlockCount);\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
EFI_STATUS\r
EFIAPI\r
MmcReset (\r
#define MMCI0_BLOCKLEN 512\r
#define MMCI0_TIMEOUT 10000\r
\r
+STATIC\r
+EFI_STATUS\r
+MmcTransferBlock (\r
+ IN EFI_BLOCK_IO_PROTOCOL *This,\r
+ IN UINTN Cmd,\r
+ IN UINTN Transfer,\r
+ IN UINT32 MediaId,\r
+ IN EFI_LBA Lba,\r
+ IN UINTN BufferSize,\r
+ OUT VOID *Buffer\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ UINTN CmdArg;\r
+ INTN Timeout;\r
+ UINT32 Response[4];\r
+ MMC_HOST_INSTANCE *MmcHostInstance;\r
+ EFI_MMC_HOST_PROTOCOL *MmcHost;\r
+\r
+ MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);\r
+ MmcHost = MmcHostInstance->MmcHost;\r
+\r
+ //Set command argument based on the card access mode (Byte mode or Block mode)\r
+ if ((MmcHostInstance->CardInfo.OCRData.AccessMode & MMC_OCR_ACCESS_MASK) ==\r
+ MMC_OCR_ACCESS_SECTOR) {\r
+ CmdArg = Lba;\r
+ } else {\r
+ CmdArg = Lba * This->Media->BlockSize;\r
+ }\r
+\r
+ Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_ERROR, "%a(MMC_CMD%d): Error %r\n", __func__, Cmd, Status));\r
+ return Status;\r
+ }\r
+\r
+ if (Transfer == MMC_IOBLOCKS_READ) {\r
+ // Read Data\r
+ Status = MmcHost->ReadBlockData (MmcHost, Lba, BufferSize, Buffer);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Read Block Data and Status = %r\n", __func__, Status));\r
+ MmcStopTransmission (MmcHost);\r
+ return Status;\r
+ }\r
+ Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_ERROR, "%a() : Error MmcProgrammingState\n", __func__));\r
+ return Status;\r
+ }\r
+ } else {\r
+ // Write Data\r
+ Status = MmcHost->WriteBlockData (MmcHost, Lba, BufferSize, Buffer);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_BLKIO, "%a(): Error Write Block Data and Status = %r\n", __func__, Status));\r
+ MmcStopTransmission (MmcHost);\r
+ return Status;\r
+ }\r
+ }\r
+\r
+ // Command 13 - Read status and wait for programming to complete (return to tran)\r
+ Timeout = MMCI0_TIMEOUT;\r
+ CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
+ Response[0] = 0;\r
+ while(!(Response[0] & MMC_R0_READY_FOR_DATA)\r
+ && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)\r
+ && Timeout--) {\r
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);\r
+ if (!EFI_ERROR (Status)) {\r
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);\r
+ if (Response[0] & MMC_R0_READY_FOR_DATA) {\r
+ break; // Prevents delay once finished\r
+ }\r
+ }\r
+ }\r
+\r
+ if (BufferSize > This->Media->BlockSize) {\r
+ Status = MmcHost->SendCommand (MmcHost, MMC_CMD12, 0);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_BLKIO, "%a(): Error and Status:%r\n", __func__, Status));\r
+ }\r
+ MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1b, Response);\r
+ }\r
+\r
+ Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
+ if (EFI_ERROR (Status)) {\r
+ DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));\r
+ return Status;\r
+ }\r
+ return Status;\r
+}\r
+\r
EFI_STATUS\r
MmcIoBlocks (\r
IN EFI_BLOCK_IO_PROTOCOL *This,\r
EFI_MMC_HOST_PROTOCOL *MmcHost;\r
UINTN BytesRemainingToBeTransfered;\r
UINTN BlockCount;\r
+ UINTN ConsumeSize;\r
\r
BlockCount = 1;\r
MmcHostInstance = MMC_HOST_INSTANCE_FROM_BLOCK_IO_THIS (This);\r
return EFI_NO_MEDIA;\r
}\r
\r
+ if (MMC_HOST_HAS_ISMULTIBLOCK(MmcHost) && MmcHost->IsMultiBlock(MmcHost)) {\r
+ BlockCount = (BufferSize + This->Media->BlockSize - 1) / This->Media->BlockSize;\r
+ }\r
+\r
// All blocks must be within the device\r
if ((Lba + (BufferSize / This->Media->BlockSize)) > (This->Media->LastBlock + 1)) {\r
return EFI_INVALID_PARAMETER;\r
return EFI_NOT_READY;\r
}\r
\r
- //Set command argument based on the card access mode (Byte mode or Block mode)\r
- if (MmcHostInstance->CardInfo.OCRData.AccessMode & BIT1) {\r
- CmdArg = Lba;\r
- } else {\r
- CmdArg = Lba * This->Media->BlockSize;\r
- }\r
-\r
- if (Transfer == MMC_IOBLOCKS_READ) {\r
- // Read a single block\r
- Cmd = MMC_CMD17;\r
- } else {\r
- // Write a single block\r
- Cmd = MMC_CMD24;\r
- }\r
- Status = MmcHost->SendCommand (MmcHost, Cmd, CmdArg);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks(MMC_CMD%d): Error %r\n", Cmd, Status));\r
- return Status;\r
- }\r
-\r
if (Transfer == MMC_IOBLOCKS_READ) {\r
- // Read one block of Data\r
- Status = MmcHost->ReadBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Read Block Data and Status = %r\n", Status));\r
- MmcStopTransmission (MmcHost);\r
- return Status;\r
- }\r
- Status = MmcNotifyState (MmcHostInstance, MmcProgrammingState);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcProgrammingState\n"));\r
- return Status;\r
+ if (BlockCount == 1) {\r
+ // Read a single block\r
+ Cmd = MMC_CMD17;\r
+ } else {\r
+ // Read multiple blocks\r
+ Cmd = MMC_CMD18;\r
}\r
} else {\r
- // Write one block of Data\r
- Status = MmcHost->WriteBlockData (MmcHost, Lba, This->Media->BlockSize, Buffer);\r
- if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_BLKIO, "MmcIoBlocks(): Error Write Block Data and Status = %r\n", Status));\r
- MmcStopTransmission (MmcHost);\r
- return Status;\r
+ if (BlockCount == 1) {\r
+ // Write a single block\r
+ Cmd = MMC_CMD24;\r
+ } else {\r
+ // Write multiple blocks\r
+ Cmd = MMC_CMD25;\r
}\r
}\r
\r
- // Command 13 - Read status and wait for programming to complete (return to tran)\r
- Timeout = MMCI0_TIMEOUT;\r
- CmdArg = MmcHostInstance->CardInfo.RCA << 16;\r
- Response[0] = 0;\r
- while( (!(Response[0] & MMC_R0_READY_FOR_DATA))\r
- && (MMC_R0_CURRENTSTATE (Response) != MMC_R0_STATE_TRAN)\r
- && Timeout--) {\r
- Status = MmcHost->SendCommand (MmcHost, MMC_CMD13, CmdArg);\r
- if (!EFI_ERROR (Status)) {\r
- MmcHost->ReceiveResponse (MmcHost, MMC_RESPONSE_TYPE_R1, Response);\r
- if ((Response[0] & MMC_R0_READY_FOR_DATA)) {\r
- break; // Prevents delay once finished\r
- }\r
- }\r
- NanoSecondDelay (100);\r
+ ConsumeSize = BlockCount * This->Media->BlockSize;\r
+ if (BytesRemainingToBeTransfered < ConsumeSize) {\r
+ ConsumeSize = BytesRemainingToBeTransfered;\r
}\r
-\r
- Status = MmcNotifyState (MmcHostInstance, MmcTransferState);\r
+ Status = MmcTransferBlock (This, Cmd, Transfer, MediaId, Lba, ConsumeSize, Buffer);\r
if (EFI_ERROR (Status)) {\r
- DEBUG ((EFI_D_ERROR, "MmcIoBlocks() : Error MmcTransferState\n"));\r
- return Status;\r
+ DEBUG ((EFI_D_ERROR, "%a(): Failed to transfer block and Status:%r\n", __func__, Status));\r
}\r
\r
- BytesRemainingToBeTransfered -= This->Media->BlockSize;\r
- Lba += BlockCount;\r
- Buffer = (UINT8 *)Buffer + This->Media->BlockSize;\r
+ BytesRemainingToBeTransfered -= ConsumeSize;\r
+ if (BytesRemainingToBeTransfered > 0) {\r
+ Lba += BlockCount;\r
+ Buffer = (UINT8 *)Buffer + ConsumeSize;\r
+ }\r
}\r
\r
return EFI_SUCCESS;\r
projects / mirror_edk2.git / blobdiff