+++ /dev/null
-/** @file\r
- Copyright (c) 2006 - 2007 Intel Corporation. <BR>\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- @par Revision Reference:\r
- 2002-6: Add Atapi6 enhancement, support >120GB hard disk, including\r
- update - ATAIdentity() func\r
- update - AtaBlockIoReadBlocks() func\r
- update - AtaBlockIoWriteBlocks() func\r
- add - AtaAtapi6Identify() func\r
- add - AtaReadSectorsExt() func\r
- add - AtaWriteSectorsExt() func\r
- add - AtaPioDataInExt() func\r
- add - AtaPioDataOutExt() func\r
-\r
-**/\r
-\r
-#include "idebus.h"\r
-\r
-/**\r
- Sends out an ATA Identify Command to the specified device.\r
-\r
- This function is called by DiscoverIdeDevice() during its device\r
- identification. It sends out the ATA Identify Command to the\r
- specified device. Only ATA device responses to this command. If\r
- the command succeeds, it returns the Identify data structure which\r
- contains information about the device. This function extracts the\r
- information it needs to fill the IDE_BLK_IO_DEV data structure,\r
- including device type, media block size, media capacity, and etc.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure,used\r
- to record all the information of the IDE device.\r
-\r
- @retval EFI_SUCCESS Identify ATA device successfully.\r
-\r
- @retval EFI_DEVICE_ERROR ATA Identify Device Command failed or\r
- device is not ATA device.\r
-\r
- @note\r
- parameter IdeDev will be updated in this function.\r
-\r
-**/\r
-EFI_STATUS\r
-ATAIdentify (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
- EFI_STATUS Status;\r
- EFI_IDENTIFY_DATA *AtaIdentifyPointer;\r
- UINT32 Capacity;\r
- UINT8 DeviceSelect;\r
-\r
- //\r
- // AtaIdentifyPointer is used for accommodating returned IDENTIFY data of\r
- // the ATA Identify command\r
- //\r
- AtaIdentifyPointer = (EFI_IDENTIFY_DATA *) AllocateZeroPool (sizeof (EFI_IDENTIFY_DATA));\r
-\r
- //\r
- // use ATA PIO Data In protocol to send ATA Identify command\r
- // and receive data from device\r
- //\r
- DeviceSelect = (UINT8) ((IdeDev->Device) << 4);\r
- Status = AtaPioDataIn (\r
- IdeDev,\r
- (VOID *) AtaIdentifyPointer,\r
- sizeof (EFI_IDENTIFY_DATA),\r
- ATA_CMD_IDENTIFY_DRIVE,\r
- DeviceSelect,\r
- 0,\r
- 0,\r
- 0,\r
- 0\r
- );\r
- //\r
- // If ATA Identify command succeeds, then according to the received\r
- // IDENTIFY data,\r
- // identify the device type ( ATA or not ).\r
- // If ATA device, fill the information in IdeDev.\r
- // If not ATA device, return IDE_DEVICE_ERROR\r
- //\r
- if (!EFI_ERROR (Status)) {\r
-\r
- IdeDev->pIdData = AtaIdentifyPointer;\r
-\r
- //\r
- // Print ATA Module Name\r
- //\r
- PrintAtaModuleName (IdeDev);\r
-\r
- //\r
- // bit 15 of pAtaIdentify->config is used to identify whether device is\r
- // ATA device or ATAPI device.\r
- // if 0, means ATA device; if 1, means ATAPI device.\r
- //\r
- if ((AtaIdentifyPointer->AtaData.config & 0x8000) == 0x00) {\r
- //\r
- // Detect if support S.M.A.R.T. If yes, enable it as default\r
- //\r
- AtaSMARTSupport (IdeDev);\r
-\r
- //\r
- // Check whether this device needs 48-bit addressing (ATAPI-6 ata device)\r
- //\r
- Status = AtaAtapi6Identify (IdeDev);\r
- if (!EFI_ERROR (Status)) {\r
- //\r
- // It's a disk with >120GB capacity, initialized in AtaAtapi6Identify()\r
- //\r
- return EFI_SUCCESS;\r
- }\r
- //\r
- // This is a hard disk <= 120GB capacity, treat it as normal hard disk\r
- //\r
- IdeDev->Type = IdeHardDisk;\r
-\r
- //\r
- // Block Media Information:\r
- // Media->LogicalPartition , Media->WriteCaching will be filled\r
- // in the DiscoverIdeDevcie() function.\r
- //\r
- IdeDev->BlkIo.Media->IoAlign = 4;\r
- IdeDev->BlkIo.Media->MediaId = 1;\r
- IdeDev->BlkIo.Media->RemovableMedia = FALSE;\r
- IdeDev->BlkIo.Media->MediaPresent = TRUE;\r
- IdeDev->BlkIo.Media->ReadOnly = FALSE;\r
- IdeDev->BlkIo.Media->BlockSize = 0x200;\r
-\r
- //\r
- // Calculate device capacity\r
- //\r
- Capacity = ((UINT32)AtaIdentifyPointer->AtaData.user_addressable_sectors_hi << 16) |\r
- AtaIdentifyPointer->AtaData.user_addressable_sectors_lo ;\r
- IdeDev->BlkIo.Media->LastBlock = Capacity - 1;\r
-\r
- return EFI_SUCCESS;\r
-\r
- }\r
- }\r
-\r
- gBS->FreePool (AtaIdentifyPointer);\r
- //\r
- // Make sure the pIdData will not be freed again.\r
- //\r
- IdeDev->pIdData = NULL;\r
-\r
- return EFI_DEVICE_ERROR;\r
-}\r
-\r
-\r
-/**\r
- This function is called by ATAIdentify() to identity whether this disk\r
- supports ATA/ATAPI6 48bit addressing, ie support >120G capacity\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @retval EFI_SUCCESS The disk specified by IdeDev is a Atapi6 supported one\r
- and 48-bit addressing must be used\r
-\r
- @retval EFI_UNSUPPORTED The disk dosn't not support Atapi6 or it supports but\r
- the capacity is below 120G, 48bit addressing is not\r
- needed\r
-\r
- @note\r
- This function must be called after DEVICE_IDENTITY command has been\r
- successfully returned\r
-\r
-**/\r
-EFI_STATUS\r
-AtaAtapi6Identify (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
- UINT8 Index;\r
- EFI_LBA TmpLba;\r
- EFI_LBA Capacity;\r
- EFI_IDENTIFY_DATA *Atapi6IdentifyStruct;\r
-\r
- if (IdeDev->pIdData == NULL) {\r
- return EFI_UNSUPPORTED;\r
- }\r
-\r
- Atapi6IdentifyStruct = IdeDev->pIdData;\r
-\r
- if ((Atapi6IdentifyStruct->AtapiData.cmd_set_support_83 & BIT10) == 0) {\r
- //\r
- // The device dosn't support 48 bit addressing\r
- //\r
- return EFI_UNSUPPORTED;\r
- }\r
-\r
- //\r
- // 48 bit address feature set is supported, get maximum capacity\r
- //\r
- Capacity = Atapi6IdentifyStruct->AtapiData.max_user_lba_for_48bit_addr[0];\r
- for (Index = 1; Index < 4; Index++) {\r
- //\r
- // Lower byte goes first: word[100] is the lowest word, word[103] is highest\r
- //\r
- TmpLba = Atapi6IdentifyStruct->AtapiData.max_user_lba_for_48bit_addr[Index];\r
- Capacity |= LShiftU64 (TmpLba, 16 * Index);\r
- }\r
-\r
- if (Capacity > MAX_28BIT_ADDRESSING_CAPACITY) {\r
- //\r
- // Capacity exceeds 120GB. 48-bit addressing is really needed\r
- //\r
- IdeDev->Type = Ide48bitAddressingHardDisk;\r
-\r
- //\r
- // Fill block media information:Media->LogicalPartition ,\r
- // Media->WriteCaching will be filledin the DiscoverIdeDevcie() function.\r
- //\r
- IdeDev->BlkIo.Media->IoAlign = 4;\r
- IdeDev->BlkIo.Media->MediaId = 1;\r
- IdeDev->BlkIo.Media->RemovableMedia = FALSE;\r
- IdeDev->BlkIo.Media->MediaPresent = TRUE;\r
- IdeDev->BlkIo.Media->ReadOnly = FALSE;\r
- IdeDev->BlkIo.Media->BlockSize = 0x200;\r
- IdeDev->BlkIo.Media->LastBlock = Capacity - 1;\r
-\r
- return EFI_SUCCESS;\r
- }\r
-\r
- return EFI_UNSUPPORTED;\r
-}\r
-\r
-/**\r
- This function is called by ATAIdentify() or ATAPIIdentify()\r
- to print device's module name.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
-**/\r
-VOID\r
-PrintAtaModuleName (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
- if (IdeDev->pIdData == NULL) {\r
- return ;\r
- }\r
-\r
- SwapStringChars (IdeDev->ModelName, IdeDev->pIdData->AtaData.ModelName, 40);\r
- IdeDev->ModelName[40] = 0x00;\r
-}\r
-\r
-/**\r
- This function is used to send out ATA commands conforms to the\r
- PIO Data In Protocol.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *Buffer\r
- buffer contained data transferred from device to host.\r
-\r
- @param[in] ByteCount\r
- data size in byte unit of the buffer.\r
-\r
- @param[in] AtaCommand\r
- value of the Command Register\r
-\r
- @param[in] Head\r
- value of the Head/Device Register\r
-\r
- @param[in] SectorCount\r
- value of the Sector Count Register\r
-\r
- @param[in] SectorNumber\r
- value of the Sector Number Register\r
-\r
- @param[in] CylinderLsb\r
- value of the low byte of the Cylinder Register\r
-\r
- @param[in] CylinderMsb\r
- value of the high byte of the Cylinder Register\r
-\r
- @retval EFI_SUCCESS send out the ATA command and device send required\r
- data successfully.\r
-\r
- @retval EFI_DEVICE_ERROR command sent failed.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaPioDataIn (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *Buffer,\r
- IN UINT32 ByteCount,\r
- IN UINT8 AtaCommand,\r
- IN UINT8 Head,\r
- IN UINT8 SectorCount,\r
- IN UINT8 SectorNumber,\r
- IN UINT8 CylinderLsb,\r
- IN UINT8 CylinderMsb\r
- )\r
-{\r
- UINTN WordCount;\r
- UINTN Increment;\r
- UINT16 *Buffer16;\r
- EFI_STATUS Status;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // e0:1110,0000-- bit7 and bit5 are reserved bits.\r
- // bit6 set means LBA mode\r
- //\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- (UINT8) ((IdeDev->Device << 4) | 0xe0 | Head)\r
- );\r
-\r
- //\r
- // All ATAPI device's ATA commands can be issued regardless of the\r
- // state of the DRDY\r
- //\r
- if (IdeDev->Type == IdeHardDisk) {\r
-\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
- }\r
- //\r
- // set all the command parameters\r
- // Before write to all the following registers, BSY and DRQ must be 0.\r
- //\r
- Status = DRQClear2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- if (AtaCommand == ATA_CMD_SET_FEATURES) {\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r
- }\r
-\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, SectorNumber);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, CylinderLsb);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, CylinderMsb);\r
-\r
- //\r
- // send command via Command Register\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- Buffer16 = (UINT16 *) Buffer;\r
-\r
- //\r
- // According to PIO data in protocol, host can perform a series of reads to\r
- // the data register after each time device set DRQ ready;\r
- // The data size of "a series of read" is command specific.\r
- // For most ATA command, data size received from device will not exceed\r
- // 1 sector, hence the data size for "a series of read" can be the whole data\r
- // size of one command request.\r
- // For ATA command such as Read Sector command, the data size of one ATA\r
- // command request is often larger than 1 sector, according to the\r
- // Read Sector command, the data size of "a series of read" is exactly 1\r
- // sector.\r
- // Here for simplification reason, we specify the data size for\r
- // "a series of read" to 1 sector (256 words) if data size of one ATA command\r
- // request is larger than 256 words.\r
- //\r
- Increment = 256;\r
-\r
- //\r
- // used to record bytes of currently transfered data\r
- //\r
- WordCount = 0;\r
-\r
- while (WordCount < ByteCount / 2) {\r
- //\r
- // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r
- //\r
- Status = DRQReady2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- Status = CheckErrorStatus (IdeDev);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Get the byte count for one series of read\r
- //\r
- if ((WordCount + Increment) > ByteCount / 2) {\r
- Increment = ByteCount / 2 - WordCount;\r
- }\r
-\r
- IDEReadPortWMultiple (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Data,\r
- Increment,\r
- Buffer16\r
- );\r
-\r
- WordCount += Increment;\r
- Buffer16 += Increment;\r
-\r
- }\r
-\r
- DRQClear (IdeDev, ATATIMEOUT);\r
-\r
- return CheckErrorStatus (IdeDev);\r
-}\r
-\r
-/**\r
- This function is used to send out ATA commands conforms to the\r
- PIO Data Out Protocol.\r
-\r
- @param *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param *Buffer buffer contained data transferred from host to device.\r
- @param ByteCount data size in byte unit of the buffer.\r
- @param AtaCommand value of the Command Register\r
- @param Head value of the Head/Device Register\r
- @param SectorCount value of the Sector Count Register\r
- @param SectorNumber value of the Sector Number Register\r
- @param CylinderLsb value of the low byte of the Cylinder Register\r
- @param CylinderMsb value of the high byte of the Cylinder Register\r
-\r
- @retval EFI_SUCCESS send out the ATA command and device received required\r
- data successfully.\r
-\r
- @retval EFI_DEVICE_ERROR command sent failed.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaPioDataOut (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *Buffer,\r
- IN UINT32 ByteCount,\r
- IN UINT8 AtaCommand,\r
- IN UINT8 Head,\r
- IN UINT8 SectorCount,\r
- IN UINT8 SectorNumber,\r
- IN UINT8 CylinderLsb,\r
- IN UINT8 CylinderMsb\r
- )\r
-{\r
- UINTN WordCount;\r
- UINTN Increment;\r
- UINT16 *Buffer16;\r
- EFI_STATUS Status;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // select device via Head/Device register.\r
- // Before write Head/Device register, BSY and DRQ must be 0.\r
- //\r
- Status = DRQClear2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // e0:1110,0000-- bit7 and bit5 are reserved bits.\r
- // bit6 set means LBA mode\r
- //\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- (UINT8) ((IdeDev->Device << 4) | 0xe0 | Head)\r
- );\r
-\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // set all the command parameters\r
- // Before write to all the following registers, BSY and DRQ must be 0.\r
- //\r
- Status = DRQClear2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, SectorNumber);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, CylinderLsb);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, CylinderMsb);\r
-\r
- //\r
- // send command via Command Register\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- Buffer16 = (UINT16 *) Buffer;\r
-\r
- //\r
- // According to PIO data out protocol, host can perform a series of\r
- // writes to the data register after each time device set DRQ ready;\r
- // The data size of "a series of read" is command specific.\r
- // For most ATA command, data size written to device will not exceed 1 sector,\r
- // hence the data size for "a series of write" can be the data size of one\r
- // command request.\r
- // For ATA command such as Write Sector command, the data size of one\r
- // ATA command request is often larger than 1 sector, according to the\r
- // Write Sector command, the data size of "a series of read" is exactly\r
- // 1 sector.\r
- // Here for simplification reason, we specify the data size for\r
- // "a series of write" to 1 sector (256 words) if data size of one ATA command\r
- // request is larger than 256 words.\r
- //\r
- Increment = 256;\r
- WordCount = 0;\r
-\r
- while (WordCount < ByteCount / 2) {\r
-\r
- //\r
- // DRQReady2-- read Alternate Status Register to determine the DRQ bit\r
- // data transfer can be performed only when DRQ is ready.\r
- //\r
- Status = DRQReady2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- Status = CheckErrorStatus (IdeDev);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Check the remaining byte count is less than 512 bytes\r
- //\r
- if ((WordCount + Increment) > ByteCount / 2) {\r
- Increment = ByteCount / 2 - WordCount;\r
- }\r
- //\r
- // perform a series of write without check DRQ ready\r
- //\r
-\r
- IDEWritePortWMultiple (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Data,\r
- Increment,\r
- Buffer16\r
- );\r
- WordCount += Increment;\r
- Buffer16 += Increment;\r
-\r
- }\r
-\r
- DRQClear (IdeDev, ATATIMEOUT);\r
-\r
- return CheckErrorStatus (IdeDev);\r
-}\r
-\r
-/**\r
- This function is used to analyze the Status Register and print out\r
- some debug information and if there is ERR bit set in the Status\r
- Register, the Error Register's value is also be parsed and print out.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @retval EFI_SUCCESS No err information in the Status Register.\r
- @retval EFI_DEVICE_ERROR Any err information in the Status Register.\r
-\r
-**/\r
-EFI_STATUS\r
-CheckErrorStatus (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
- UINT8 StatusRegister;\r
- UINT8 ErrorRegister;\r
-\r
- StatusRegister = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Status);\r
-\r
- DEBUG_CODE_BEGIN ();\r
-\r
- if (StatusRegister & ATA_STSREG_DWF) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Write Fault\n",\r
- StatusRegister)\r
- );\r
- }\r
-\r
- if (StatusRegister & ATA_STSREG_CORR) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Corrected Data\n",\r
- StatusRegister)\r
- );\r
- }\r
-\r
- if (StatusRegister & ATA_STSREG_ERR) {\r
- ErrorRegister = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Error);\r
-\r
- if (ErrorRegister & ATA_ERRREG_BBK) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Bad Block Detected\n",\r
- ErrorRegister)\r
- );\r
- }\r
-\r
- if (ErrorRegister & ATA_ERRREG_UNC) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Uncorrectable Data\n",\r
- ErrorRegister)\r
- );\r
- }\r
-\r
- if (ErrorRegister & ATA_ERRREG_MC) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Media Change\n",\r
- ErrorRegister)\r
- );\r
- }\r
-\r
- if (ErrorRegister & ATA_ERRREG_ABRT) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Abort\n",\r
- ErrorRegister)\r
- );\r
- }\r
-\r
- if (ErrorRegister & ATA_ERRREG_TK0NF) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Track 0 Not Found\n",\r
- ErrorRegister)\r
- );\r
- }\r
-\r
- if (ErrorRegister & ATA_ERRREG_AMNF) {\r
- DEBUG (\r
- (EFI_D_BLKIO,\r
- "CheckErrorStatus()-- %02x : Error : Address Mark Not Found\n",\r
- ErrorRegister)\r
- );\r
- }\r
- }\r
-\r
- DEBUG_CODE_END ();\r
-\r
- if ((StatusRegister & (ATA_STSREG_ERR | ATA_STSREG_DWF | ATA_STSREG_CORR)) == 0) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- return EFI_DEVICE_ERROR;\r
-\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoReadBlocks() to perform\r
- reading from media in block unit.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer\r
- A pointer to the destination buffer for the data.\r
-\r
- @param[in] Lba\r
- The starting logical block address to read from\r
- on the device media.\r
-\r
- @param[in] NumberOfBlocks\r
- The number of transfer data blocks.\r
-\r
- @return return status is fully dependent on the return status\r
- of AtaPioDataIn() function.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaReadSectors (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA Lba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINTN BlocksRemaining;\r
- UINT32 Lba32;\r
- UINT8 Lba0;\r
- UINT8 Lba1;\r
- UINT8 Lba2;\r
- UINT8 Lba3;\r
- UINT8 AtaCommand;\r
- UINT8 SectorCount8;\r
- UINT16 SectorCount;\r
- UINTN ByteCount;\r
- VOID *Buffer;\r
-\r
- Buffer = DataBuffer;\r
-\r
- //\r
- // Using ATA Read Sector(s) command (opcode=0x20) with PIO DATA IN protocol\r
- //\r
- AtaCommand = ATA_CMD_READ_SECTORS;\r
-\r
-\r
- BlocksRemaining = NumberOfBlocks;\r
-\r
- Lba32 = (UINT32) Lba;\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- while (BlocksRemaining > 0) {\r
-\r
- //\r
- // in ATA-3 spec, LBA is in 28 bit width\r
- //\r
- Lba0 = (UINT8) Lba32;\r
- Lba1 = (UINT8) (Lba32 >> 8);\r
- Lba2 = (UINT8) (Lba32 >> 16);\r
- //\r
- // low 4 bit of Lba3 stands for LBA bit24~bit27.\r
- //\r
- Lba3 = (UINT8) ((Lba32 >> 24) & 0x0f);\r
-\r
- if (BlocksRemaining >= 0x100) {\r
-\r
- //\r
- // SectorCount8 is sent to Sector Count register, 0x00 means 256\r
- // sectors to be read\r
- //\r
- SectorCount8 = 0x00;\r
- //\r
- // SectorCount is used to record the number of sectors to be read\r
- //\r
- SectorCount = 256;\r
- } else {\r
-\r
- SectorCount8 = (UINT8) BlocksRemaining;\r
- SectorCount = (UINT16) BlocksRemaining;\r
- }\r
-\r
- //\r
- // ByteCount is the number of bytes that will be read\r
- //\r
- ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r
-\r
- //\r
- // call AtaPioDataIn() to send Read Sector Command and receive data read\r
- //\r
- Status = AtaPioDataIn (\r
- IdeDev,\r
- Buffer,\r
- (UINT32) ByteCount,\r
- AtaCommand,\r
- Lba3,\r
- SectorCount8,\r
- Lba0,\r
- Lba1,\r
- Lba2\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- Lba32 += SectorCount;\r
- Buffer = ((UINT8 *) Buffer + ByteCount);\r
- BlocksRemaining -= SectorCount;\r
- }\r
-\r
- return Status;\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoWriteBlocks() to perform\r
- writing onto media in block unit.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure,used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *BufferData\r
- A pointer to the source buffer for the data.\r
-\r
- @param[in] Lba\r
- The starting logical block address to write onto\r
- the device media.\r
-\r
- @param[in] NumberOfBlocks\r
- The number of transfer data blocks.\r
-\r
- @return return status is fully dependent on the return status\r
- of AtaPioDataOut() function.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaWriteSectors (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *BufferData,\r
- IN EFI_LBA Lba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINTN BlocksRemaining;\r
- UINT32 Lba32;\r
- UINT8 Lba0;\r
- UINT8 Lba1;\r
- UINT8 Lba2;\r
- UINT8 Lba3;\r
- UINT8 AtaCommand;\r
- UINT8 SectorCount8;\r
- UINT16 SectorCount;\r
- UINTN ByteCount;\r
- VOID *Buffer;\r
-\r
- Buffer = BufferData;\r
-\r
- //\r
- // Using Write Sector(s) command (opcode=0x30) with PIO DATA OUT protocol\r
- //\r
- AtaCommand = ATA_CMD_WRITE_SECTORS;\r
-\r
- BlocksRemaining = NumberOfBlocks;\r
-\r
- Lba32 = (UINT32) Lba;\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- while (BlocksRemaining > 0) {\r
-\r
- Lba0 = (UINT8) Lba32;\r
- Lba1 = (UINT8) (Lba32 >> 8);\r
- Lba2 = (UINT8) (Lba32 >> 16);\r
- Lba3 = (UINT8) ((Lba32 >> 24) & 0x0f);\r
-\r
- if (BlocksRemaining >= 0x100) {\r
-\r
- //\r
- // SectorCount8 is sent to Sector Count register, 0x00 means 256 sectors\r
- // to be written\r
- //\r
- SectorCount8 = 0x00;\r
- //\r
- // SectorCount is used to record the number of sectors to be written\r
- //\r
- SectorCount = 256;\r
- } else {\r
-\r
- SectorCount8 = (UINT8) BlocksRemaining;\r
- SectorCount = (UINT16) BlocksRemaining;\r
- }\r
-\r
- ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r
-\r
- Status = AtaPioDataOut (\r
- IdeDev,\r
- Buffer,\r
- (UINT32) ByteCount,\r
- AtaCommand,\r
- Lba3,\r
- SectorCount8,\r
- Lba0,\r
- Lba1,\r
- Lba2\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- Lba32 += SectorCount;\r
- Buffer = ((UINT8 *) Buffer + ByteCount);\r
- BlocksRemaining -= SectorCount;\r
- }\r
-\r
- return Status;\r
-}\r
-\r
-/**\r
- This function is used to implement the Soft Reset on the specified\r
- device. But, the ATA Soft Reset mechanism is so strong a reset method\r
- that it will force resetting on both devices connected to the\r
- same cable.\r
-\r
- It is called by IdeBlkIoReset(), a interface function of Block\r
- I/O protocol.\r
-\r
- This function can also be used by the ATAPI device to perform reset when\r
- ATAPI Reset command is failed.\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @retval EFI_SUCCESS Soft reset completes successfully.\r
- @retval EFI_DEVICE_ERROR Any step during the reset process is failed.\r
-\r
- @note\r
- The registers initial values after ATA soft reset are different\r
- to the ATA device and ATAPI device.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaSoftReset (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
-\r
- UINT8 DeviceControl;\r
-\r
- DeviceControl = 0;\r
- //\r
- // set SRST bit to initiate soft reset\r
- //\r
- DeviceControl |= ATA_CTLREG_SRST;\r
-\r
- //\r
- // disable Interrupt\r
- //\r
- DeviceControl |= BIT1;\r
-\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r
-\r
- //\r
- // SRST should assert for at least 5 us, we use 10 us for\r
- // better compatibility\r
- //\r
- gBS->Stall (10);\r
-\r
- //\r
- // Enable interrupt to support UDMA, and clear SRST bit\r
- //\r
- DeviceControl = 0;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r
-\r
- //\r
- // Wait for at least 2 ms to check BSY status, we use 10 ms\r
- // for better compatibility\r
- //\r
- gBS->Stall(10000);\r
- //\r
- // slave device needs at most 31s to clear BSY\r
- //\r
- if (WaitForBSYClear (IdeDev, 31000) == EFI_TIMEOUT) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/**\r
- This function is the ATA implementation for ReadBlocks in the\r
- Block I/O Protocol interface.\r
-\r
- @param[in] *IdeBlkIoDevice\r
- Indicates the calling context.\r
-\r
- @param[in] MediaId\r
- The media id that the read request is for.\r
-\r
- @param[in] LBA\r
- The starting logical block address to read from\r
- on the device.\r
-\r
- @param[in] BufferSize\r
- The size of the Buffer in bytes. This must be a\r
- multiple of the intrinsic block size of the device.\r
-\r
- @param[out] *Buffer\r
- A pointer to the destination buffer for the data.\r
- The caller is responsible for either having implicit\r
- or explicit ownership of the memory that data is read into.\r
-\r
- @retval EFI_SUCCESS Read Blocks successfully.\r
- @retval EFI_DEVICE_ERROR Read Blocks failed.\r
- @retval EFI_NO_MEDIA There is no media in the device.\r
- @retval EFI_MEDIA_CHANGE The MediaId is not for the current media.\r
-\r
- @retval EFI_BAD_BUFFER_SIZE\r
- The BufferSize parameter is not a multiple of the\r
- intrinsic block size of the device.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- The read request contains LBAs that are not valid,\r
- or the data buffer is not valid.\r
-\r
- @note\r
- If Read Block error because of device error, this function will call\r
- AtaSoftReset() function to reset device.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaBlkIoReadBlocks (\r
- IN IDE_BLK_IO_DEV *IdeBlkIoDevice,\r
- IN UINT32 MediaId,\r
- IN EFI_LBA LBA,\r
- IN UINTN BufferSize,\r
- OUT VOID *Buffer\r
- )\r
-{\r
- EFI_BLOCK_IO_MEDIA *Media;\r
- UINTN BlockSize;\r
- UINTN NumberOfBlocks;\r
- EFI_STATUS Status;\r
-\r
- if (Buffer == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if (BufferSize == 0) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- //\r
- // Get the intrinsic block size\r
- //\r
- Media = IdeBlkIoDevice->BlkIo.Media;\r
- BlockSize = Media->BlockSize;\r
-\r
- NumberOfBlocks = BufferSize / BlockSize;\r
-\r
- if (MediaId != Media->MediaId) {\r
- return EFI_MEDIA_CHANGED;\r
- }\r
-\r
- if (BufferSize % BlockSize != 0) {\r
- return EFI_BAD_BUFFER_SIZE;\r
- }\r
-\r
- if (!(Media->MediaPresent)) {\r
- return EFI_NO_MEDIA;\r
- }\r
-\r
- if (LBA > Media->LastBlock) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
- if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {\r
- //\r
- // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 read block mechanism\r
- //\r
- if (IdeBlkIoDevice->UdmaMode.Valid) {\r
- Status = AtaUdmaReadExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- } else {\r
- Status = AtaReadSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- }\r
- } else {\r
- //\r
- // For ATA-3 compatible device, use ATA-3 read block mechanism\r
- //\r
- if (IdeBlkIoDevice->UdmaMode.Valid) {\r
- Status = AtaUdmaRead (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- } else {\r
- Status = AtaReadSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- }\r
- }\r
-\r
- if (EFI_ERROR (Status)) {\r
- AtaSoftReset (IdeBlkIoDevice);\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-\r
-}\r
-\r
-/**\r
- This function is the ATA implementation for WriteBlocks in the\r
- Block I/O Protocol interface.\r
-\r
- @param[in] *IdeBlkIoDevice\r
- Indicates the calling context.\r
-\r
- @param[in] MediaId\r
- The media id that the write request is for.\r
-\r
- @param[in] LBA\r
- The starting logical block address to write onto\r
- the device.\r
-\r
- @param[in] BufferSize\r
- The size of the Buffer in bytes. This must be a\r
- multiple of the intrinsic block size of the device.\r
-\r
- @param[out] *Buffer\r
- A pointer to the source buffer for the data.\r
- The caller is responsible for either having implicit\r
- or explicit ownership of the memory that data is\r
- written from.\r
-\r
- @retval EFI_SUCCESS Write Blocks successfully.\r
- @retval EFI_DEVICE_ERROR Write Blocks failed.\r
- @retval EFI_NO_MEDIA There is no media in the device.\r
- @retval EFI_MEDIA_CHANGE The MediaId is not for the current media.\r
-\r
- @retval EFI_BAD_BUFFER_SIZE\r
- The BufferSize parameter is not a multiple of the\r
- intrinsic block size of the device.\r
-\r
- @retval EFI_INVALID_PARAMETER\r
- The write request contains LBAs that are not valid,\r
- or the data buffer is not valid.\r
-\r
- @note\r
- If Write Block error because of device error, this function will call\r
- AtaSoftReset() function to reset device.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaBlkIoWriteBlocks (\r
- IN IDE_BLK_IO_DEV *IdeBlkIoDevice,\r
- IN UINT32 MediaId,\r
- IN EFI_LBA LBA,\r
- IN UINTN BufferSize,\r
- OUT VOID *Buffer\r
- )\r
-{\r
-\r
- EFI_BLOCK_IO_MEDIA *Media;\r
- UINTN BlockSize;\r
- UINTN NumberOfBlocks;\r
- EFI_STATUS Status;\r
-\r
- if (Buffer == NULL) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if (BufferSize == 0) {\r
- return EFI_SUCCESS;\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- //\r
- // Get the intrinsic block size\r
- //\r
- Media = IdeBlkIoDevice->BlkIo.Media;\r
- BlockSize = Media->BlockSize;\r
- NumberOfBlocks = BufferSize / BlockSize;\r
-\r
- if (MediaId != Media->MediaId) {\r
- return EFI_MEDIA_CHANGED;\r
- }\r
-\r
- if (BufferSize % BlockSize != 0) {\r
- return EFI_BAD_BUFFER_SIZE;\r
- }\r
-\r
- if (LBA > Media->LastBlock) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if ((LBA + NumberOfBlocks - 1) > Media->LastBlock) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- if ((Media->IoAlign > 1) && (((UINTN) Buffer & (Media->IoAlign - 1)) != 0)) {\r
- return EFI_INVALID_PARAMETER;\r
- }\r
-\r
- Status = EFI_SUCCESS;\r
- if (IdeBlkIoDevice->Type == Ide48bitAddressingHardDisk) {\r
- //\r
- // For ATA/ATAPI-6 device(capcity > 120GB), use ATA-6 write block mechanism\r
- //\r
- if (IdeBlkIoDevice->UdmaMode.Valid) {\r
- Status = AtaUdmaWriteExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- } else {\r
- Status = AtaWriteSectorsExt (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- }\r
- } else {\r
- //\r
- // For ATA-3 compatible device, use ATA-3 write block mechanism\r
- //\r
- if (IdeBlkIoDevice->UdmaMode.Valid) {\r
- Status = AtaUdmaWrite (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- } else {\r
- Status = AtaWriteSectors (IdeBlkIoDevice, Buffer, LBA, NumberOfBlocks);\r
- }\r
- }\r
-\r
- if (EFI_ERROR (Status)) {\r
- AtaSoftReset (IdeBlkIoDevice);\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoReadBlocks() to perform\r
- reading from media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer A pointer to the destination buffer for the data.\r
- @param[in] StartLba The starting logical block address to read from\r
- on the device media.\r
- @param[in] NumberOfBlocks The number of transfer data blocks.\r
-\r
- @return return status is fully dependent on the return status\r
- of AtaPioDataInExt() function.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaReadSectorsExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINTN BlocksRemaining;\r
- EFI_LBA Lba64;\r
- UINT8 AtaCommand;\r
- UINT16 SectorCount;\r
- UINT32 ByteCount;\r
- VOID *Buffer;\r
-\r
- //\r
- // Using ATA "Read Sectors Ext" command(opcode=0x24) with PIO DATA IN protocol\r
- //\r
- AtaCommand = ATA_CMD_READ_SECTORS_EXT;\r
- Buffer = DataBuffer;\r
- BlocksRemaining = NumberOfBlocks;\r
- Lba64 = StartLba;\r
- Status = EFI_SUCCESS;\r
-\r
- while (BlocksRemaining > 0) {\r
-\r
- if (BlocksRemaining >= 0x10000) {\r
- //\r
- // SectorCount is used to record the number of sectors to be read\r
- // Max 65536 sectors can be transfered at a time.\r
- //\r
- SectorCount = 0xffff;\r
- } else {\r
- SectorCount = (UINT16) BlocksRemaining;\r
- }\r
-\r
- //\r
- // ByteCount is the number of bytes that will be read\r
- //\r
- ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r
-\r
- //\r
- // call AtaPioDataInExt() to send Read Sector Command and receive data read\r
- //\r
- Status = AtaPioDataInExt (\r
- IdeDev,\r
- Buffer,\r
- ByteCount,\r
- AtaCommand,\r
- Lba64,\r
- SectorCount\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- Lba64 += SectorCount;\r
- Buffer = ((UINT8 *) Buffer + ByteCount);\r
- BlocksRemaining -= SectorCount;\r
- }\r
-\r
- return Status;\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoWriteBlocks() to perform\r
- writing onto media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure,used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer\r
- A pointer to the source buffer for the data.\r
-\r
- @param[in] Lba\r
- The starting logical block address to write onto\r
- the device media.\r
-\r
- @param[in] NumberOfBlocks\r
- The number of transfer data blocks.\r
-\r
- @return status is fully dependent on the return status\r
- of AtaPioDataOutExt() function.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaWriteSectorsExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- EFI_STATUS Status;\r
- EFI_LBA Lba64;\r
- UINTN BlocksRemaining;\r
- UINT8 AtaCommand;\r
- UINT16 SectorCount;\r
- UINT32 ByteCount;\r
- VOID *Buffer;\r
-\r
- //\r
- // Using ATA "Write Sectors Ext" cmd(opcode=0x24) with PIO DATA OUT protocol\r
- //\r
- AtaCommand = ATA_CMD_WRITE_SECTORS_EXT;\r
- Lba64 = StartLba;\r
- Buffer = DataBuffer;\r
- BlocksRemaining = NumberOfBlocks;\r
-\r
- Status = EFI_SUCCESS;\r
-\r
- while (BlocksRemaining > 0) {\r
-\r
- if (BlocksRemaining >= 0x10000) {\r
- //\r
- // SectorCount is used to record the number of sectors to be written.\r
- // Max 65536 sectors can be transfered at a time.\r
- //\r
- SectorCount = 0xffff;\r
- } else {\r
- SectorCount = (UINT16) BlocksRemaining;\r
- }\r
-\r
- //\r
- // ByteCount is the number of bytes that will be written\r
- //\r
- ByteCount = SectorCount * (IdeDev->BlkIo.Media->BlockSize);\r
-\r
- //\r
- // Call AtaPioDataOutExt() to send "Write Sectors Ext" Command\r
- //\r
- Status = AtaPioDataOutExt (\r
- IdeDev,\r
- Buffer,\r
- ByteCount,\r
- AtaCommand,\r
- Lba64,\r
- SectorCount\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return Status;\r
- }\r
-\r
- Lba64 += SectorCount;\r
- Buffer = ((UINT8 *) Buffer + ByteCount);\r
- BlocksRemaining -= SectorCount;\r
- }\r
-\r
- return Status;\r
-}\r
-\r
-/**\r
- This function is used to send out ATA commands conforms to the\r
- PIO Data In Protocol, supporting ATA/ATAPI-6 standard\r
-\r
- Comparing with ATA-3 data in protocol, we have two differents here:<BR>\r
- 1. Do NOT wait for DRQ clear before sending command into IDE device.(the\r
- wait will frequently fail... cause writing function return error)\r
-\r
- 2. Do NOT wait for DRQ clear after all data readed.(the wait greatly\r
- slow down writing performance by 100 times!)\r
-\r
- @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in,out] *Buffer buffer contained data transferred from device to host.\r
- @param[in] ByteCount data size in byte unit of the buffer.\r
- @param[in] AtaCommand value of the Command Register\r
- @param[in] StartLba the start LBA of this transaction\r
- @param[in] SectorCount the count of sectors to be transfered\r
-\r
- @retval EFI_SUCCESS send out the ATA command and device send required\r
- data successfully.\r
-\r
- @retval EFI_DEVICE_ERROR command sent failed.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaPioDataInExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN OUT VOID *Buffer,\r
- IN UINT32 ByteCount,\r
- IN UINT8 AtaCommand,\r
- IN EFI_LBA StartLba,\r
- IN UINT16 SectorCount\r
- )\r
-{\r
- UINT8 DevSel;\r
- UINT8 SectorCount8;\r
- UINT8 LbaLow;\r
- UINT8 LbaMid;\r
- UINT8 LbaHigh;\r
- UINTN WordCount;\r
- UINTN Increment;\r
- UINT16 *Buffer16;\r
- EFI_STATUS Status;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Select device, set bit6 as 1 to indicate LBA mode is used\r
- //\r
- DevSel = (UINT8) (IdeDev->Device << 4);\r
- DevSel |= 0x40;\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- DevSel\r
- );\r
-\r
- //\r
- // Wait for DRDY singnal asserting. ATAPI device needn't wait\r
- //\r
- if ( (IdeDev->Type == IdeHardDisk) ||\r
- (IdeDev->Type == Ide48bitAddressingHardDisk)) {\r
-\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
- }\r
-\r
- //\r
- // Fill feature register if needed\r
- //\r
- if (AtaCommand == ATA_CMD_SET_FEATURES) {\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r
- }\r
-\r
- //\r
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r
- //\r
- SectorCount8 = (UINT8) (SectorCount >> 8);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- SectorCount8 = (UINT8) SectorCount;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- //\r
- // Fill the start LBA registers, which are also two-byte FIFO\r
- //\r
- LbaLow = (UINT8) RShiftU64 (StartLba, 24);\r
- LbaMid = (UINT8) RShiftU64 (StartLba, 32);\r
- LbaHigh = (UINT8) RShiftU64 (StartLba, 40);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
-\r
- LbaLow = (UINT8) StartLba;\r
- LbaMid = (UINT8) RShiftU64 (StartLba, 8);\r
- LbaHigh = (UINT8) RShiftU64 (StartLba, 16);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
-\r
- //\r
- // Send command via Command Register, invoking the processing of this command\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- Buffer16 = (UINT16 *) Buffer;\r
-\r
- //\r
- // According to PIO data in protocol, host can perform a series of reads to\r
- // the data register after each time device set DRQ ready;\r
- //\r
-\r
- //\r
- // 256 words\r
- //\r
- Increment = 256;\r
-\r
- //\r
- // used to record bytes of currently transfered data\r
- //\r
- WordCount = 0;\r
-\r
- while (WordCount < ByteCount / 2) {\r
- //\r
- // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r
- //\r
- Status = DRQReady2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- Status = CheckErrorStatus (IdeDev);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Get the byte count for one series of read\r
- //\r
- if ((WordCount + Increment) > ByteCount / 2) {\r
- Increment = ByteCount / 2 - WordCount;\r
- }\r
-\r
- IDEReadPortWMultiple (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Data,\r
- Increment,\r
- Buffer16\r
- );\r
-\r
- WordCount += Increment;\r
- Buffer16 += Increment;\r
-\r
- }\r
-\r
- return CheckErrorStatus (IdeDev);\r
-}\r
-\r
-/**\r
- This function is used to send out ATA commands conforms to the\r
- PIO Data Out Protocol, supporting ATA/ATAPI-6 standard\r
-\r
- Comparing with ATA-3 data out protocol, we have two differents here:<BR>\r
- 1. Do NOT wait for DRQ clear before sending command into IDE device.(the\r
- wait will frequently fail... cause writing function return error)\r
-\r
- 2. Do NOT wait for DRQ clear after all data readed.(the wait greatly\r
- slow down writing performance by 100 times!)\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *Buffer buffer contained data transferred from host to device.\r
- @param[in] ByteCount data size in byte unit of the buffer.\r
- @param[in] AtaCommand value of the Command Register\r
- @param[in] StartLba the start LBA of this transaction\r
- @param[in] SectorCount the count of sectors to be transfered\r
-\r
- @retval EFI_SUCCESS send out the ATA command and device receive required\r
- data successfully.\r
-\r
- @retval EFI_DEVICE_ERROR command sent failed.\r
-\r
-**/\r
-EFI_STATUS\r
-AtaPioDataOutExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *Buffer,\r
- IN UINT32 ByteCount,\r
- IN UINT8 AtaCommand,\r
- IN EFI_LBA StartLba,\r
- IN UINT16 SectorCount\r
- )\r
-{\r
- UINT8 DevSel;\r
- UINT8 SectorCount8;\r
- UINT8 LbaLow;\r
- UINT8 LbaMid;\r
- UINT8 LbaHigh;\r
- UINTN WordCount;\r
- UINTN Increment;\r
- UINT16 *Buffer16;\r
- EFI_STATUS Status;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Select device. Set bit6 as 1 to indicate LBA mode is used\r
- //\r
- DevSel = (UINT8) (IdeDev->Device << 4);\r
- DevSel |= 0x40;\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- DevSel\r
- );\r
-\r
- //\r
- // Wait for DRDY singnal asserting.\r
- //\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Fill feature register if needed\r
- //\r
- if (AtaCommand == ATA_CMD_SET_FEATURES) {\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, 0x03);\r
- }\r
-\r
- //\r
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r
- //\r
- SectorCount8 = (UINT8) (SectorCount >> 8);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- SectorCount8 = (UINT8) SectorCount;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- //\r
- // Fill the start LBA registers, which are also two-byte FIFO\r
- //\r
- LbaLow = (UINT8) RShiftU64 (StartLba, 24);\r
- LbaMid = (UINT8) RShiftU64 (StartLba, 32);\r
- LbaHigh = (UINT8) RShiftU64 (StartLba, 40);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
-\r
- LbaLow = (UINT8) StartLba;\r
- LbaMid = (UINT8) RShiftU64 (StartLba, 8);\r
- LbaHigh = (UINT8) RShiftU64 (StartLba, 16);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
-\r
- //\r
- // Send command via Command Register, invoking the processing of this command\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- Buffer16 = (UINT16 *) Buffer;\r
-\r
- //\r
- // According to PIO Data Out protocol, host can perform a series of writes to\r
- // the data register after each time device set DRQ ready;\r
- //\r
- Increment = 256;\r
-\r
- //\r
- // used to record bytes of currently transfered data\r
- //\r
- WordCount = 0;\r
-\r
- while (WordCount < ByteCount / 2) {\r
- //\r
- // Poll DRQ bit set, data transfer can be performed only when DRQ is ready.\r
- //\r
- Status = DRQReady2 (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- Status = CheckErrorStatus (IdeDev);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Write data into device by one series of writing to data register\r
- //\r
- if ((WordCount + Increment) > ByteCount / 2) {\r
- Increment = ByteCount / 2 - WordCount;\r
- }\r
-\r
- IDEWritePortWMultiple (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Data,\r
- Increment,\r
- Buffer16\r
- );\r
-\r
- WordCount += Increment;\r
- Buffer16 += Increment;\r
-\r
- }\r
- //\r
- // while\r
- //\r
-\r
- return CheckErrorStatus (IdeDev);\r
-}\r
-\r
-\r
-/**\r
- Enable SMART of the disk if supported\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure,used\r
- to record all the information of the IDE device.\r
-\r
-**/\r
-VOID\r
-AtaSMARTSupport (\r
- IN IDE_BLK_IO_DEV *IdeDev\r
- )\r
-{\r
- EFI_STATUS Status;\r
- BOOLEAN SMARTSupported;\r
- UINT8 Device;\r
- EFI_IDENTIFY_DATA *TmpAtaIdentifyPointer;\r
- UINT8 DeviceSelect;\r
- UINT8 LBAMid;\r
- UINT8 LBAHigh;\r
-\r
- //\r
- // Detect if the device supports S.M.A.R.T.\r
- //\r
- if ((IdeDev->pIdData->AtaData.command_set_supported_83 & 0xc000) != 0x4000) {\r
- //\r
- // Data in word 82 is not valid (bit15 shall be zero and bit14 shall be to one)\r
- //\r
- return ;\r
- } else {\r
- if ((IdeDev->pIdData->AtaData.command_set_supported_82 & 0x0001) != 0x0001) {\r
- //\r
- // S.M.A.R.T is not supported by the device\r
- //\r
- SMARTSupported = FALSE;\r
- } else {\r
- SMARTSupported = TRUE;\r
- }\r
- }\r
-\r
- if (!SMARTSupported) {\r
- //\r
- // Report nonsupport status code\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_NOTSUPPORTED)\r
- );\r
- } else {\r
- //\r
- // Enable this feature\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_ENABLE)\r
- );\r
-\r
- Device = (UINT8) ((IdeDev->Device << 4) | 0xe0);\r
- Status = AtaNonDataCommandIn (\r
- IdeDev,\r
- ATA_CMD_SMART,\r
- Device,\r
- ATA_SMART_ENABLE_OPERATION,\r
- 0,\r
- 0,\r
- ATA_CONSTANT_4F,\r
- ATA_CONSTANT_C2\r
- );\r
- //\r
- // Detect if this feature is enabled\r
- //\r
- TmpAtaIdentifyPointer = (EFI_IDENTIFY_DATA *) AllocateZeroPool (sizeof (EFI_IDENTIFY_DATA));\r
-\r
- DeviceSelect = (UINT8) ((IdeDev->Device) << 4);\r
- Status = AtaPioDataIn (\r
- IdeDev,\r
- (VOID *) TmpAtaIdentifyPointer,\r
- sizeof (EFI_IDENTIFY_DATA),\r
- ATA_CMD_IDENTIFY_DRIVE,\r
- DeviceSelect,\r
- 0,\r
- 0,\r
- 0,\r
- 0\r
- );\r
- if (EFI_ERROR (Status)) {\r
- gBS->FreePool (TmpAtaIdentifyPointer);\r
- return ;\r
- }\r
-\r
- //\r
- // Check if the feature is enabled\r
- //\r
- if ((TmpAtaIdentifyPointer->AtaData.command_set_feature_enb_85 & 0x0001) == 0x0001) {\r
- //\r
- // Read status data\r
- //\r
- AtaNonDataCommandIn (\r
- IdeDev,\r
- ATA_CMD_SMART,\r
- Device,\r
- ATA_SMART_RETURN_STATUS,\r
- 0,\r
- 0,\r
- ATA_CONSTANT_4F,\r
- ATA_CONSTANT_C2\r
- );\r
- LBAMid = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb);\r
- LBAHigh = IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb);\r
-\r
- if ((LBAMid == 0x4f) && (LBAHigh == 0xc2)) {\r
- //\r
- // The threshold exceeded condition is not detected by the device\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_UNDERTHRESHOLD)\r
- );\r
-\r
- } else if ((LBAMid == 0xf4) && (LBAHigh == 0x2c)) {\r
- //\r
- // The threshold exceeded condition is detected by the device\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_PROGRESS_CODE,\r
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_OVERTHRESHOLD)\r
- );\r
- }\r
-\r
- } else {\r
- //\r
- // Report disabled status code\r
- //\r
- REPORT_STATUS_CODE (\r
- EFI_ERROR_CODE | EFI_ERROR_MINOR,\r
- (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_ATA_BUS_SMART_DISABLED)\r
- );\r
- }\r
-\r
- gBS->FreePool (TmpAtaIdentifyPointer);\r
- }\r
-\r
- return ;\r
-}\r
-\r
-/**\r
- Send ATA Ext command into device with NON_DATA protocol\r
-\r
- @param IdeDev Standard IDE device private data structure\r
- @param AtaCommand The ATA command to be sent\r
- @param Device The value in Device register\r
- @param Feature The value in Feature register\r
- @param SectorCount The value in SectorCount register\r
- @param LbaAddress The LBA address in 48-bit mode\r
-\r
- @retval EFI_SUCCESS Reading succeed\r
- @retval EFI_DEVICE_ERROR Error executing commands on this device\r
-\r
-**/\r
-EFI_STATUS\r
-AtaCommandIssueExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN UINT8 AtaCommand,\r
- IN UINT8 Device,\r
- IN UINT16 Feature,\r
- IN UINT16 SectorCount,\r
- IN EFI_LBA LbaAddress\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINT8 SectorCount8;\r
- UINT8 Feature8;\r
- UINT8 LbaLow;\r
- UINT8 LbaMid;\r
- UINT8 LbaHigh;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)\r
- //\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- (UINT8) ((IdeDev->Device << 4) | 0xe0)\r
- );\r
-\r
- //\r
- // ATA commands for ATA device must be issued when DRDY is set\r
- //\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Pass parameter into device register block\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r
-\r
- //\r
- // Fill the feature register, which is a two-byte FIFO. Need write twice.\r
- //\r
- Feature8 = (UINT8) (Feature >> 8);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r
-\r
- Feature8 = (UINT8) Feature;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r
-\r
- //\r
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r
- //\r
- SectorCount8 = (UINT8) (SectorCount >> 8);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- SectorCount8 = (UINT8) SectorCount;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- //\r
- // Fill the start LBA registers, which are also two-byte FIFO\r
- //\r
- LbaLow = (UINT8) RShiftU64 (LbaAddress, 24);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
- LbaLow = (UINT8) LbaAddress;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, LbaLow);\r
-\r
- LbaMid = (UINT8) RShiftU64 (LbaAddress, 32);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
- LbaMid = (UINT8) RShiftU64 (LbaAddress, 8);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, LbaMid);\r
-\r
- LbaHigh = (UINT8) RShiftU64 (LbaAddress, 40);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
- LbaHigh = (UINT8) RShiftU64 (LbaAddress, 16);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, LbaHigh);\r
-\r
- //\r
- // Work around for Segate 160G disk writing\r
- //\r
- gBS->Stall (1800);\r
-\r
- //\r
- // Send command via Command Register\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- //\r
- // Stall at least 400ns\r
- //\r
- gBS->Stall (100);\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/**\r
- Send ATA Ext command into device with NON_DATA protocol\r
-\r
- @param IdeDev Standard IDE device private data structure\r
- @param AtaCommand The ATA command to be sent\r
- @param Device The value in Device register\r
- @param Feature The value in Feature register\r
- @param SectorCount The value in SectorCount register\r
- @param LbaAddress The LBA address in 48-bit mode\r
-\r
- @retval EFI_SUCCESS Reading succeed\r
- @retval EFI_DEVICE_ERROR Error executing commands on this device\r
-\r
-**/\r
-EFI_STATUS\r
-AtaCommandIssue (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN UINT8 AtaCommand,\r
- IN UINT8 Device,\r
- IN UINT16 Feature,\r
- IN UINT16 SectorCount,\r
- IN EFI_LBA LbaAddress\r
- )\r
-{\r
- EFI_STATUS Status;\r
- UINT8 SectorCount8;\r
- UINT8 Feature8;\r
- UINT8 Lba0;\r
- UINT8 Lba1;\r
- UINT8 Lba2;\r
- UINT8 Lba3;\r
-\r
- Status = WaitForBSYClear (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Select device (bit4), set LBA mode(bit6) (use 0xe0 for compatibility)\r
- //\r
- IDEWritePortB (\r
- IdeDev->PciIo,\r
- IdeDev->IoPort->Head,\r
- (UINT8) ((IdeDev->Device << 4) | 0xe0)\r
- );\r
-\r
- //\r
- // ATA commands for ATA device must be issued when DRDY is set\r
- //\r
- Status = DRDYReady (IdeDev, ATATIMEOUT);\r
- if (EFI_ERROR (Status)) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- Lba0 = (UINT8) LbaAddress;\r
- Lba1 = (UINT8) RShiftU64 (LbaAddress, 8);\r
- Lba2 = (UINT8) RShiftU64 (LbaAddress, 16);\r
- Lba3 = (UINT8) RShiftU64 (LbaAddress, 24);\r
- Device = (UINT8) (Device | Lba3);\r
-\r
- //\r
- // Pass parameter into device register block\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r
-\r
- //\r
- // Fill the feature register, which is a two-byte FIFO. Need write twice.\r
- //\r
- Feature8 = (UINT8) Feature;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg1.Feature, Feature8);\r
-\r
- //\r
- // Fill the sector count register, which is a two-byte FIFO. Need write twice.\r
- //\r
- SectorCount8 = (UINT8) SectorCount;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorCount, SectorCount8);\r
-\r
- //\r
- // Fill the start LBA registers, which are also two-byte FIFO\r
- //\r
-\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->SectorNumber, Lba0);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderLsb, Lba1);\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->CylinderMsb, Lba2);\r
-\r
- //\r
- // Send command via Command Register\r
- //\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Reg.Command, AtaCommand);\r
-\r
- //\r
- // Stall at least 400ns\r
- //\r
- gBS->Stall (100);\r
-\r
- return EFI_SUCCESS;\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoReadBlocks() to perform\r
- reading from media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer A pointer to the destination buffer for the data.\r
-\r
- @param[in] StartLba The starting logical block address to read from\r
- on the device media.\r
-\r
- @param[in] NumberOfBlocks The number of transfer data blocks.\r
-\r
- @return The device status of UDMA operation. If the operation is\r
- successful, return EFI_SUCCESS.\r
-\r
- TODO: EFI_UNSUPPORTED - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
-**/\r
-EFI_STATUS\r
-AtaUdmaReadExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadExtOp);\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoReadBlocks() to perform\r
- reading from media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer A pointer to the destination buffer for the data.\r
- @param[in] StartLba The starting logical block address to read from\r
- on the device media.\r
- @param[in] NumberOfBlocks The number of transfer data blocks.\r
-\r
- @return The device status of UDMA operation. If the operation is\r
- successful, return EFI_SUCCESS.\r
-\r
- TODO: EFI_UNSUPPORTED - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
-**/\r
-EFI_STATUS\r
-AtaUdmaRead (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaReadOp);\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoWriteBlocks() to perform\r
- writing to media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer A pointer to the source buffer for the data.\r
-\r
- @param[in] StartLba The starting logical block address to write to\r
- on the device media.\r
-\r
- @param[in] NumberOfBlocks The number of transfer data blocks.\r
-\r
- @return The device status of UDMA operation. If the operation is\r
- successful, return EFI_SUCCESS.\r
-\r
- TODO: EFI_UNSUPPORTED - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
-**/\r
-EFI_STATUS\r
-AtaUdmaWriteExt (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteExtOp);\r
-}\r
-\r
-/**\r
- This function is called by the AtaBlkIoWriteBlocks() to perform\r
- writing to media in block unit. The function has been enhanced to\r
- support >120GB access and transfer at most 65536 blocks per command\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer\r
- A pointer to the source buffer for the data.\r
-\r
- @param[in] StartLba\r
- The starting logical block address to write to\r
- on the device media.\r
-\r
- @param[in] NumberOfBlocks\r
- The number of transfer data blocks.\r
-\r
- @return The device status of UDMA operation. If the operation is\r
- successful, return EFI_SUCCESS.\r
-\r
- TODO: EFI_UNSUPPORTED - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
- TODO: EFI_DEVICE_ERROR - add return value to function comment\r
-**/\r
-EFI_STATUS\r
-AtaUdmaWrite (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks\r
- )\r
-{\r
- return DoAtaUdma (IdeDev, DataBuffer, StartLba, NumberOfBlocks, AtaUdmaWriteOp);\r
-}\r
-\r
-/**\r
- Perform an ATA Udma operation (Read, ReadExt, Write, WriteExt).\r
-\r
- @param[in] *IdeDev\r
- pointer pointing to IDE_BLK_IO_DEV data structure, used\r
- to record all the information of the IDE device.\r
-\r
- @param[in] *DataBuffer\r
- A pointer to the source buffer for the data.\r
-\r
- @param[in] StartLba\r
- The starting logical block address to write to\r
- on the device media.\r
-\r
- @param[in] NumberOfBlocks\r
- The number of transfer data blocks.\r
-\r
- @param[in] UdmaOp\r
- The perform operations could be AtaUdmaReadOp, AtaUdmaReadExOp,\r
- AtaUdmaWriteOp, AtaUdmaWriteExOp\r
-\r
- @return The device status of UDMA operation. If the operation is\r
- successful, return EFI_SUCCESS.\r
-\r
-**/\r
-EFI_STATUS\r
-DoAtaUdma (\r
- IN IDE_BLK_IO_DEV *IdeDev,\r
- IN VOID *DataBuffer,\r
- IN EFI_LBA StartLba,\r
- IN UINTN NumberOfBlocks,\r
- IN ATA_UDMA_OPERATION UdmaOp\r
- )\r
-{\r
- IDE_DMA_PRD *PrdAddr;\r
- IDE_DMA_PRD *UsedPrdAddr;\r
- IDE_DMA_PRD *TempPrdAddr;\r
- UINT8 RegisterValue;\r
- UINT8 Device;\r
- UINT64 IoPortForBmic;\r
- UINT64 IoPortForBmis;\r
- UINT64 IoPortForBmid;\r
- EFI_STATUS Status;\r
- UINTN PrdTableNum;\r
- UINTN ByteCount;\r
- UINTN ByteAvailable;\r
- UINT8 *PrdBuffer;\r
- UINTN RemainBlockNum;\r
- UINT8 DeviceControl;\r
- UINT32 Count;\r
- UINTN PageCount;\r
- VOID *Map;\r
- VOID *MemPage;\r
- EFI_PHYSICAL_ADDRESS DeviceAddress;\r
- UINTN MaxDmaCommandSectors;\r
- EFI_PCI_IO_PROTOCOL_OPERATION PciIoProtocolOp;\r
- UINT8 AtaCommand;\r
-\r
- switch (UdmaOp) {\r
- case AtaUdmaReadOp:\r
- MaxDmaCommandSectors = ATAPI_MAX_DMA_CMD_SECTORS;\r
- PciIoProtocolOp = EfiPciIoOperationBusMasterWrite;\r
- AtaCommand = ATA_CMD_READ_DMA;\r
- break;\r
- case AtaUdmaReadExtOp:\r
- MaxDmaCommandSectors = ATAPI_MAX_DMA_EXT_CMD_SECTORS;\r
- PciIoProtocolOp = EfiPciIoOperationBusMasterWrite;\r
- AtaCommand = ATA_CMD_READ_DMA_EXT;\r
- break;\r
- case AtaUdmaWriteOp:\r
- MaxDmaCommandSectors = ATAPI_MAX_DMA_CMD_SECTORS;\r
- PciIoProtocolOp = EfiPciIoOperationBusMasterRead;\r
- AtaCommand = ATA_CMD_WRITE_DMA;\r
- break;\r
- case AtaUdmaWriteExtOp:\r
- MaxDmaCommandSectors = ATAPI_MAX_DMA_EXT_CMD_SECTORS;\r
- PciIoProtocolOp = EfiPciIoOperationBusMasterRead;\r
- AtaCommand = ATA_CMD_WRITE_DMA_EXT;\r
- break;\r
- default:\r
- return EFI_UNSUPPORTED;\r
- break;\r
- }\r
-\r
- //\r
- // Channel and device differential\r
- //\r
- Device = (UINT8) ((IdeDev->Device << 4) | 0xe0);\r
-\r
- //\r
- // Enable interrupt to support UDMA and Select device\r
- //\r
- DeviceControl = 0;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r
-\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Head, Device);\r
-\r
- if (IdePrimary == IdeDev->Channel) {\r
- IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICP_OFFSET;\r
- IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISP_OFFSET;\r
- IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDP_OFFSET;\r
- } else {\r
- if (IdeSecondary == IdeDev->Channel) {\r
- IoPortForBmic = IdeDev->IoPort->BusMasterBaseAddr + BMICS_OFFSET;\r
- IoPortForBmis = IdeDev->IoPort->BusMasterBaseAddr + BMISS_OFFSET;\r
- IoPortForBmid = IdeDev->IoPort->BusMasterBaseAddr + BMIDS_OFFSET;\r
- } else {\r
- return EFI_UNSUPPORTED;\r
- }\r
- }\r
-\r
- RemainBlockNum = NumberOfBlocks;\r
- while (RemainBlockNum > 0) {\r
-\r
- if (RemainBlockNum >= MaxDmaCommandSectors) {\r
- //\r
- // SectorCount is used to record the number of sectors to be read\r
- // Max 65536 sectors can be transfered at a time.\r
- //\r
- NumberOfBlocks = MaxDmaCommandSectors;\r
- RemainBlockNum -= MaxDmaCommandSectors;\r
- } else {\r
- NumberOfBlocks = (UINT16) RemainBlockNum;\r
- RemainBlockNum = 0;\r
- }\r
-\r
- //\r
- // Calculate the number of PRD table to make sure the memory region\r
- // not cross 64K boundary\r
- //\r
- ByteCount = NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize;\r
- PrdTableNum = ((ByteCount >> 16) + 1) + 1;\r
-\r
- //\r
- // Build PRD table\r
- //\r
- PageCount = EFI_SIZE_TO_PAGES (2 * PrdTableNum * sizeof (IDE_DMA_PRD));\r
- Status = IdeDev->PciIo->AllocateBuffer (\r
- IdeDev->PciIo,\r
- AllocateAnyPages,\r
- EfiBootServicesData,\r
- PageCount,\r
- &MemPage,\r
- 0\r
- );\r
- if (EFI_ERROR (Status)) {\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- ZeroMem ((VOID *) ((UINTN) MemPage), EFI_PAGES_TO_SIZE (PageCount));\r
-\r
- PrdAddr = (IDE_DMA_PRD *) ((UINTN) MemPage);\r
- //\r
- // To make sure PRD is allocated in one 64K page\r
- //\r
- if (((UINTN) PrdAddr & 0x0FFFF) > (((UINTN) PrdAddr + PrdTableNum * sizeof (IDE_DMA_PRD) - 1) & 0x0FFFF)) {\r
- UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x10000) & 0xFFFF0000);\r
- } else {\r
- if ((UINTN) PrdAddr & 0x03) {\r
- UsedPrdAddr = (IDE_DMA_PRD *) ((UINTN) ((UINT8 *) PrdAddr + 0x04) & 0xFFFFFFFC);\r
- } else {\r
- UsedPrdAddr = PrdAddr;\r
- }\r
- }\r
-\r
- //\r
- // Build the PRD table\r
- //\r
- Status = IdeDev->PciIo->Map (\r
- IdeDev->PciIo,\r
- PciIoProtocolOp,\r
- DataBuffer,\r
- &ByteCount,\r
- &DeviceAddress,\r
- &Map\r
- );\r
- if (EFI_ERROR (Status)) {\r
- IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r
- return EFI_OUT_OF_RESOURCES;\r
- }\r
- PrdBuffer = (VOID *) ((UINTN) DeviceAddress);\r
- TempPrdAddr = UsedPrdAddr;\r
- while (TRUE) {\r
-\r
- ByteAvailable = 0x10000 - ((UINTN) PrdBuffer & 0xFFFF);\r
-\r
- if (ByteCount <= ByteAvailable) {\r
- TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer);\r
- TempPrdAddr->ByteCount = (UINT16) ByteCount;\r
- TempPrdAddr->EndOfTable = 0x8000;\r
- break;\r
- }\r
-\r
- TempPrdAddr->RegionBaseAddr = (UINT32) ((UINTN) PrdBuffer);\r
- TempPrdAddr->ByteCount = (UINT16) ByteAvailable;\r
-\r
- ByteCount -= ByteAvailable;\r
- PrdBuffer += ByteAvailable;\r
- TempPrdAddr++;\r
- }\r
-\r
- //\r
- // Set the base address to BMID register\r
- //\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint32,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmid,\r
- 1,\r
- &UsedPrdAddr\r
- );\r
-\r
- //\r
- // Set BMIC register to identify the operation direction\r
- //\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- if (UdmaOp == AtaUdmaReadExtOp || UdmaOp == AtaUdmaReadOp) {\r
- RegisterValue |= BMIC_nREAD;\r
- } else {\r
- RegisterValue &= ~((UINT8) BMIC_nREAD);\r
- }\r
-\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- //\r
- // Read BMIS register and clear ERROR and INTR bit\r
- //\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmis,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- RegisterValue |= (BMIS_INTERRUPT | BMIS_ERROR);\r
-\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmis,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- if (UdmaOp == AtaUdmaWriteExtOp || UdmaOp == AtaUdmaReadExtOp) {\r
- Status = AtaCommandIssueExt (\r
- IdeDev,\r
- AtaCommand,\r
- Device,\r
- 0,\r
- (UINT16) NumberOfBlocks,\r
- StartLba\r
- );\r
- } else {\r
- Status = AtaCommandIssue (\r
- IdeDev,\r
- AtaCommand,\r
- Device,\r
- 0,\r
- (UINT16) NumberOfBlocks,\r
- StartLba\r
- );\r
- }\r
-\r
- if (EFI_ERROR (Status)) {\r
- IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r
- IdeDev->PciIo->Unmap (IdeDev->PciIo, Map);\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- //\r
- // Set START bit of BMIC register\r
- //\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- RegisterValue |= BMIC_START;\r
-\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- //\r
- // Check the INTERRUPT and ERROR bit of BMIS\r
- // Max transfer number of sectors for one command is 65536(32Mbyte),\r
- // it will cost 1 second to transfer these data in UDMA mode 2(33.3MBps).\r
- // So set the variable Count to 2000, for about 2 second timeout time.\r
- //\r
- Count = 2000;\r
- while (TRUE) {\r
-\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmis,\r
- 1,\r
- &RegisterValue\r
- );\r
- if ((RegisterValue & (BMIS_INTERRUPT | BMIS_ERROR)) || (Count == 0)) {\r
- if ((RegisterValue & BMIS_ERROR) || (Count == 0)) {\r
- //\r
- // Clear START bit of BMIC register before return EFI_DEVICE_ERROR\r
- //\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- RegisterValue &= ~((UINT8)BMIC_START);\r
-\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
- IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r
- IdeDev->PciIo->Unmap (IdeDev->PciIo, Map);\r
- return EFI_DEVICE_ERROR;\r
- }\r
- break;\r
- }\r
-\r
- gBS->Stall (1000);\r
- Count --;\r
- }\r
-\r
- IdeDev->PciIo->FreeBuffer (IdeDev->PciIo, PageCount, MemPage);\r
- IdeDev->PciIo->Unmap (IdeDev->PciIo, Map);\r
- //\r
- // Read Status Register of IDE device to clear interrupt\r
- //\r
- RegisterValue = IDEReadPortB(IdeDev->PciIo,IdeDev->IoPort->Reg.Status);\r
- //\r
- // Clear START bit of BMIC register\r
- //\r
- IdeDev->PciIo->Io.Read (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- RegisterValue &= ~((UINT8) BMIC_START);\r
-\r
- IdeDev->PciIo->Io.Write (\r
- IdeDev->PciIo,\r
- EfiPciIoWidthUint8,\r
- EFI_PCI_IO_PASS_THROUGH_BAR,\r
- IoPortForBmic,\r
- 1,\r
- &RegisterValue\r
- );\r
-\r
- if (RegisterValue & BMIS_ERROR) {\r
- return EFI_DEVICE_ERROR;\r
- }\r
-\r
- DataBuffer = (UINT8 *) DataBuffer + NumberOfBlocks * IdeDev->BlkIo.Media->BlockSize;\r
- StartLba += NumberOfBlocks;\r
- }\r
-\r
- //\r
- // Disable interrupt of Select device\r
- //\r
- IDEReadPortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl);\r
- DeviceControl |= ATA_CTLREG_IEN_L;\r
- IDEWritePortB (IdeDev->PciIo, IdeDev->IoPort->Alt.DeviceControl, DeviceControl);\r
-\r
- return EFI_SUCCESS;\r
-}\r
projects / mirror_edk2.git / blobdiff