/** @file\r
- This file declares Smbus PPI which provides the basic I/O interfaces that a PEIM \r
+ This file declares the Smbus PPI, which provides the basic I/O interfaces that a PEIM \r
uses to access its SMBus controller and the slave devices attached to it.\r
\r
Copyright (c) 2007 - 2009, Intel Corporation\r
THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
\r
- Module Name: Smbus.h\r
-\r
@par Revision Reference:\r
This PPI is defined in Framework of EFI SmBus PPI spec.\r
Version 0.9\r
#ifndef _PEI_SMBUS_PPI_H_\r
#define _PEI_SMBUS_PPI_H_\r
\r
-#include <PiPei.h>\r
#include <Ppi/Smbus2.h>\r
\r
#define EFI_PEI_SMBUS_PPI_GUID \\r
/**\r
Executes an SMBus operation to an SMBus controller.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress The SMBUS hardware address to which the SMBUS\r
- device is preassigned or allocated.\r
- @param Command This command is transmitted by the SMBus host\r
- controller to the SMBus slave device and the interpretation is\r
- SMBus slave device specific.\r
- @param Operation Signifies which particular SMBus hardware protocol\r
- instance that it will use to execute the SMBus transactions.\r
- @param PecCheck Defines if Packet Error Code (PEC) checking is required\r
- for this operation.\r
- @param Length Signifies the number of bytes that this operation will do.\r
- @param Buffer Contains the value of data to execute to the SMBus slave device.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS\r
+ device is preassigned or allocated.\r
+ @param[in] Command This command is transmitted by the SMBus host\r
+ controller to the SMBus slave device and the interpretation is\r
+ SMBus slave device specific.\r
+ @param[in] Operation Signifies which particular SMBus hardware protocol\r
+ instance to use to execute the SMBus transactions.\r
+ @param[in] PecCheck Defines if Packet Error Code (PEC) checking is required\r
+ for this operation.\r
+ @param[in, out] Length The number of bytes for this operation\r
+ @param[in, out] Buffer Contains the value of data to execute to the SMBus slave device.\r
\r
@retval EFI_SUCCESS The last data that was returned from the access\r
matched the poll exit criteria.\r
- @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect)\r
+ @retval EFI_CRC_ERROR The checksum is not correct (PEC is incorrect).\r
@retval EFI_TIMEOUT Timeout expired before the operation was completed.\r
Timeout is determined by the SMBus host controller device.\r
@retval EFI_OUT_OF_RESOURCES The request could not be completed\r
due to a lack of resources.\r
@retval EFI_DEVICE_ERROR The request was not completed because\r
- a failure reflected in the Host Status Register bit.\r
+ a failure was recorded in the Host Status Register bit.\r
@retval EFI_INVALID_PARAMETER Operation is not defined in EFI_SMBUS_OPERATION.\r
- Or Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
+ @retval EFI_INVALID_PARAMETER Length/Buffer is NULL for operations except for EfiSmbusQuickRead and\r
EfiSmbusQuickWrite. Length is outside the range of valid values.\r
@retval EFI_UNSUPPORTED The SMBus operation or PEC is not supported.\r
@retval EFI_BUFFER_TOO_SMALL Buffer is not sufficient for this operation.\r
);\r
\r
/**\r
- CallBack function can be registered in EFI_PEI_SMBUS_PPI_NOTIFY.\r
+ This function is user-defined, and is called when the SlaveAddress/Data pair happens.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress The SMBUS hardware address to which the SMBUS\r
- device is preassigned or allocated.\r
- @param Data Data of the SMBus host notify command that\r
- the caller wants to be called.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress The SMBUS hardware address to which the SMBUS\r
+ device is preassigned or allocated.\r
+ @param[in] Data Data of the SMBus host notify command, which denotes that\r
+ the caller wants to be called.\r
\r
- @return Status Code\r
+ @return Status Code returned by callback function.\r
\r
**/\r
typedef\r
);\r
\r
/**\r
- The ArpDevice() function enumerates the entire bus or enumerates a specific\r
- device that is identified by SmbusUdid.\r
-\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param ArpAll A Boolean expression that indicates if the host drivers need\r
- to enumerate all the devices or enumerate only the device that is identified\r
- by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional.\r
- If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
- will be at SlaveAddress.\r
- @param SmbusUdid The targeted SMBus Unique Device Identifier (UDID).\r
- The UDID may not exist for SMBus devices with fixed addresses.\r
- @param SlaveAddress The new SMBus address for the slave device for\r
- which the operation is targeted.\r
+ The ArpDevice() function enumerates either the entire bus or a specific\r
+ device identified by SmbusUdid.\r
+\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] ArpAll A Boolean expression that indicates if the host drivers need\r
+ to enumerate all the devices or enumerate only the device that is identified\r
+ by SmbusUdid. If ArpAll is TRUE, SmbusUdid and SlaveAddress are optional and ignored if entered.\r
+ If ArpAll is FALSE, ArpDevice will enumerate SmbusUdid and the address\r
+ will be at SlaveAddress.\r
+ @param[in] SmbusUdid The targeted SMBus Unique Device Identifier (UDID).\r
+ The UDID may not exist for SMBus devices with fixed addresses.\r
+ @param[in, out] SlaveAddress The new SMBus address for the slave device for\r
+ which the operation is targeted.\r
+ This address may be NULL.\r
\r
@retval EFI_SUCCESS The SMBus slave device address was set.\r
@retval EFI_INVALID_PARAMETER SlaveAddress is NULL.\r
due to a lack of resources.\r
@retval EFI_TIMEOUT The SMBus slave device did not respond.\r
@retval EFI_DEVICE_ERROR The request was not completed because the transaction failed.\r
+ @retval EFI_UNSUPPORTED ArpDevice() is not implemented by this PEIM. \r
+ This return value is not defined in Framwork Specification.\r
+ This return value was introduced in the PI Specification.\r
\r
**/\r
typedef\r
The GetArpMap() function returns the mapping of all the SMBus devices\r
that are enumerated by the SMBus host driver.\r
\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param Length Size of the buffer that contains the SMBus device map.\r
- @param SmbusDeviceMap The pointer to the device map as enumerated\r
- by the SMBus controller driver.\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in, out] Length Size of the buffer that contains the SMBus device map.\r
+ @param[in, out] SmbusDeviceMap The pointer to the device map as enumerated\r
+ by the SMBus controller driver.\r
\r
- @retval EFI_SUCCESS The device map was returned correctly in the buffer.\r
+ @retval EFI_SUCCESS The device map was returned correctly in the buffer.\r
+ @retval EFI_UNSUPPORTED GetArpMap() are not implemented by this PEIM. \r
+ This return value was not defined in Framwork Specification.\r
+ This return value was introduced in the PI Specification.\r
\r
**/\r
typedef\r
);\r
\r
/**\r
+ Allows a device driver to register for a callback when the bus driver detects a state that it needs to \r
+ propagate to other PEIMs that are registered for a callback.\r
+\r
The Notify() function registers all the callback functions to allow the\r
bus driver to call these functions when the SlaveAddress/Data pair happens.\r
-\r
- @param PeiServices A pointer to the system PEI Services Table.\r
- @param This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
- @param SlaveAddress Address that the host controller detects as\r
- sending a message and calls all the registered functions.\r
- @param Data Data that the host controller detects as sending a message\r
- and calls all the registered functions.\r
- @param NotifyFunction The function to call when the bus driver\r
- detects the SlaveAddress and Data pair.\r
-\r
- @retval EFI_SUCCESS NotifyFunction has been registered.\r
+ All functions to be registered with EFI_PEI_SMBUS_PPI_NOTIFY must be of type\r
+ EFI_PEI_SMBUS_NOTIFY_FUNCTION.\r
+\r
+ @param[in] PeiServices A pointer to the system PEI Services Table.\r
+ @param[in] This A pointer to the EFI_PEI_SMBUS_PPI instance.\r
+ @param[in] SlaveAddress Address that the host controller detects as\r
+ sending a message and triggers all the registered functions.\r
+ @param[in] Data Data that the host controller detects as sending a message\r
+ and triggers all the registered functions.\r
+ @param[in] NotifyFunction The function to call when the bus driver\r
+ detects the SlaveAddress and Data pair.\r
+\r
+ @retval EFI_SUCCESS NotifyFunction has been registered.\r
+ @retval EFI_UNSUPPORTED Notify() are not implemented by this PEIM. \r
+ This return value is not defined in Framwork Specification.\r
+ This return value was introduced in the PI Specification.\r
\r
**/\r
typedef\r
EFI_STATUS\r
(EFIAPI *EFI_PEI_SMBUS_PPI_NOTIFY)(\r
- IN EFI_PEI_SERVICES **PeiServices,\r
- IN EFI_PEI_SMBUS_PPI *This,\r
- IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
- IN UINTN Data,\r
+ IN EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_SMBUS_PPI *This,\r
+ IN EFI_SMBUS_DEVICE_ADDRESS SlaveAddress,\r
+ IN UINTN Data,\r
IN EFI_PEI_SMBUS_NOTIFY_FUNCTION NotifyFunction\r
);\r
\r
-/**\r
- Provides the basic I/O interfaces that a PEIM uses to access\r
- its SMBus controller and the slave devices attached to it.\r
-**/\r
+///\r
+/// Provides the basic I/O interfaces that a PEIM uses to access\r
+/// its SMBus controller and the slave devices attached to it.\r
+///\r
struct _EFI_PEI_SMBUS_PPI {\r
///\r
/// Executes the SMBus operation to an SMBus slave device.\r