Add missing status code in several modules.

[mirror_edk2.git] / MdeModulePkg / Bus / Scsi / ScsiBusDxe / ScsiBus.c

diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
index 7387a44dbedf3f1e3b52502db034234a053e6dde..a0833cfaf493d7710331bfd634b4585faa16c34d 100644 (file)
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.c
@@ -2,7 +2,7 @@
   SCSI Bus driver that layers on every SCSI Pass Thru and\r
   Extended SCSI Pass Thru protocol in the system.\r
 \r
-Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2006 - 2012, Intel Corporation. All rights reserved.<BR>\r
 This program and the accompanying materials\r
 are licensed and made available under the terms and conditions of the BSD License\r
 which accompanies this distribution.  The full text of the license may be found at\r
@@ -341,6 +341,15 @@ SCSIBusDriverBindingStart (
     return DevicePathStatus;\r
   }\r
 \r
+  //\r
+  // Report Status Code to indicate SCSI bus starts\r
+  //\r
+  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_SCSI | EFI_IOB_PC_INIT),\r
+    ParentDevicePath\r
+    );  \r
+\r
   //\r
   // To keep backward compatibility, UEFI ExtPassThru Protocol is supported as well as \r
   // EFI PassThru Protocol. From priority perspective, ExtPassThru Protocol is firstly\r
@@ -451,6 +460,15 @@ SCSIBusDriverBindingStart (
     ScsiBusDev = SCSI_BUS_CONTROLLER_DEVICE_FROM_THIS (BusIdentify);\r
   }\r
 \r
+  //\r
+  // Report Status Code to indicate detecting devices on bus\r
+  //\r
+  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_SCSI | EFI_IOB_PC_DETECT),\r
+    ParentDevicePath\r
+    );\r
+\r
   Lun  = 0;\r
   if (RemainingDevicePath == NULL) {\r
     //\r
@@ -828,6 +846,15 @@ ScsiResetBus (
 \r
   ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);\r
 \r
+  //\r
+  // Report Status Code to indicate reset happens\r
+  //\r
+  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),\r
+    ScsiIoDevice->ScsiBusDeviceData->DevicePath\r
+    );\r
+\r
   if (ScsiIoDevice->ExtScsiSupport){\r
     return ScsiIoDevice->ExtScsiPassThru->ResetChannel (ScsiIoDevice->ExtScsiPassThru);\r
   } else {\r
@@ -857,6 +884,16 @@ ScsiResetDevice (
   UINT8        Target[TARGET_MAX_BYTES];\r
 \r
   ScsiIoDevice = SCSI_IO_DEV_FROM_THIS (This);\r
+\r
+  //\r
+  // Report Status Code to indicate reset happens\r
+  //\r
+  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_ATA_ATAPI | EFI_IOB_PC_RESET),\r
+    ScsiIoDevice->ScsiBusDeviceData->DevicePath\r
+    );\r
+  \r
   CopyMem (Target,&ScsiIoDevice->Pun, TARGET_MAX_BYTES);\r
 \r
 \r
@@ -1121,6 +1158,7 @@ ScsiScanCreateDevice (
   }\r
 \r
   ScsiIoDevice->Signature                 = SCSI_IO_DEV_SIGNATURE;\r
+  ScsiIoDevice->ScsiBusDeviceData         = ScsiBusDev;\r
   CopyMem(&ScsiIoDevice->Pun, TargetId, TARGET_MAX_BYTES);\r
   ScsiIoDevice->Lun                       = Lun;\r
 \r
@@ -1141,6 +1179,15 @@ ScsiScanCreateDevice (
   ScsiIoDevice->ScsiIo.ResetDevice        = ScsiResetDevice;\r
   ScsiIoDevice->ScsiIo.ExecuteScsiCommand = ScsiExecuteSCSICommand;\r
 \r
+  //\r
+  // Report Status Code here since the new SCSI device will be discovered\r
+  //\r
+  REPORT_STATUS_CODE_WITH_DEVICE_PATH (\r
+    EFI_PROGRESS_CODE,\r
+    (EFI_IO_BUS_SCSI | EFI_IOB_PC_ENABLE),\r
+    ScsiBusDev->DevicePath\r
+    );\r
+\r
   if (!DiscoverScsiDevice (ScsiIoDevice)) {\r
     Status = EFI_OUT_OF_RESOURCES;\r
     goto ErrorExit;\r