UsbIf->DevicePath = AppendDevicePathNode (HubIf->DevicePath, &UsbNode.Header);\r
\r
if (UsbIf->DevicePath == NULL) {\r
- USB_ERROR (("UsbCreateInterface: failed to create device path\n"));\r
+ DEBUG ((EFI_D_ERROR, "UsbCreateInterface: failed to create device path\n"));\r
\r
Status = EFI_OUT_OF_RESOURCES;\r
goto ON_ERROR;\r
);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbCreateInterface: failed to install UsbIo - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbCreateInterface: failed to install UsbIo - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
NULL\r
);\r
\r
- USB_ERROR (("UsbCreateInterface: failed to open host for child - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbCreateInterface: failed to open host for child - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
// connect drivers with this interface\r
//\r
if (UsbIsHubInterface (UsbIf)) {\r
- USB_DEBUG (("UsbConnectDriver: found a hub device\n"));\r
+ DEBUG ((EFI_D_INFO, "UsbConnectDriver: found a hub device\n"));\r
Status = mUsbHubApi.Init (UsbIf);\r
\r
} else {\r
// or disconnect at CALLBACK.\r
//\r
OldTpl = UsbGetCurrentTpl ();\r
- USB_DEBUG (("UsbConnectDriver: TPL before connect is %d\n", OldTpl));\r
+ DEBUG ((EFI_D_INFO, "UsbConnectDriver: TPL before connect is %d\n", OldTpl));\r
\r
gBS->RestoreTPL (TPL_CALLBACK);\r
\r
Status = gBS->ConnectController (UsbIf->Handle, NULL, NULL, TRUE);\r
UsbIf->IsManaged = (BOOLEAN)!EFI_ERROR (Status);\r
\r
- USB_DEBUG (("UsbConnectDriver: TPL after connect is %d\n", UsbGetCurrentTpl()));\r
+ DEBUG ((EFI_D_INFO, "UsbConnectDriver: TPL after connect is %d\n", UsbGetCurrentTpl()));\r
ASSERT (UsbGetCurrentTpl () == TPL_CALLBACK);\r
\r
gBS->RaiseTPL (OldTpl);\r
\r
IfDesc->ActiveIndex = Index;\r
\r
- USB_DEBUG (("UsbSelectSetting: setting %d selected for interface %d\n",\r
+ DEBUG ((EFI_D_INFO, "UsbSelectSetting: setting %d selected for interface %d\n",\r
Alternate, Setting->Desc.InterfaceNumber));\r
\r
//\r
\r
Device->ActiveConfig = ConfigDesc;\r
\r
- USB_DEBUG (("UsbSelectConfig: config %d selected for device %d\n",\r
+ DEBUG ((EFI_D_INFO, "UsbSelectConfig: config %d selected for device %d\n",\r
ConfigValue, Device->Address));\r
\r
//\r
Status = UsbConnectDriver (UsbIf);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbSelectConfig: failed to connect driver %r, ignored\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbSelectConfig: failed to connect driver %r, ignored\n", Status));\r
}\r
}\r
\r
// or disconnect at CALLBACK.\r
//\r
OldTpl = UsbGetCurrentTpl ();\r
- USB_DEBUG (("UsbDisconnectDriver: old TPL is %d\n", OldTpl));\r
+ DEBUG ((EFI_D_INFO, "UsbDisconnectDriver: old TPL is %d\n", OldTpl));\r
\r
gBS->RestoreTPL (TPL_CALLBACK);\r
\r
gBS->DisconnectController (UsbIf->Handle, NULL, NULL);\r
UsbIf->IsManaged = FALSE;\r
\r
- USB_DEBUG (("UsbDisconnectDriver: TPL after disconnect is %d\n", UsbGetCurrentTpl()));\r
+ DEBUG (( EFI_D_INFO, "UsbDisconnectDriver: TPL after disconnect is %d\n", UsbGetCurrentTpl()));\r
ASSERT (UsbGetCurrentTpl () == TPL_CALLBACK);\r
\r
gBS->RaiseTPL (OldTpl);\r
Status = UsbRemoveDevice (Child);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbRemoveDevice: failed to remove child, ignore error\n"));\r
+ DEBUG ((EFI_D_ERROR, "UsbRemoveDevice: failed to remove child, ignore error\n"));\r
Bus->Devices[Index] = NULL;\r
}\r
}\r
\r
UsbRemoveConfig (Device);\r
\r
- USB_DEBUG (("UsbRemoveDevice: device %d removed\n", Device->Address));\r
+ DEBUG (( EFI_D_INFO, "UsbRemoveDevice: device %d removed\n", Device->Address));\r
\r
Bus->Devices[Device->Address] = NULL;\r
UsbFreeDevice (Device);\r
Status = HubApi->ResetPort (HubIf, Port);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to reset port %d - %r\n", Port, Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to reset port %d - %r\n", Port, Status));\r
\r
return Status;\r
}\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: hub port %d is reset\n", Port));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: hub port %d is reset\n", Port));\r
\r
Child = UsbCreateDevice (HubIf, Port);\r
\r
Status = HubApi->GetPortStatus (HubIf, Port, &PortState);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to get speed of port %d\n", Port));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to get speed of port %d\n", Port));\r
goto ON_ERROR;\r
}\r
\r
Child->Speed = EFI_USB_SPEED_FULL;\r
}\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: device is of %d speed\n", Child->Speed));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: device is of %d speed\n", Child->Speed));\r
\r
if (Child->Speed != EFI_USB_SPEED_HIGH) {\r
//\r
Child->Translator = Parent->Translator;\r
}\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: device uses translator (%d, %d)\n",\r
+ DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: device uses translator (%d, %d)\n",\r
Child->Translator.TranslatorHubAddress,\r
Child->Translator.TranslatorPortNumber));\r
}\r
Status = UsbGetMaxPacketSize0 (Child);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to get max packet for EP 0 - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to get max packet for EP 0 - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: max packet size for EP 0 is %d\n", Child->MaxPacket0));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: max packet size for EP 0 is %d\n", Child->MaxPacket0));\r
\r
//\r
// Host assigns an address to the device. Device completes the\r
}\r
\r
if (Address == USB_MAX_DEVICES) {\r
- USB_ERROR (("UsbEnumerateNewDev: address pool is full for port %d\n", Port));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: address pool is full for port %d\n", Port));\r
\r
Status = EFI_ACCESS_DENIED;\r
goto ON_ERROR;\r
Child->Address = Address;\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to set device address - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to set device address - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
//\r
gBS->Stall (20 * USB_STALL_1_MS);\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: device is now ADDRESSED at %d\n", Address));\r
+ DEBUG ((EFI_D_INFO, "UsbEnumerateNewDev: device is now ADDRESSED at %d\n", Address));\r
\r
//\r
// Host learns about the device¡¯s abilities by requesting device's\r
Status = UsbBuildDescTable (Child);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to build descriptor table - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to build descriptor table - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
Status = UsbSetConfig (Child, Config);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to set configure %d - %r\n", Config, Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to set configure %d - %r\n", Config, Status));\r
goto ON_ERROR;\r
}\r
\r
- USB_DEBUG (("UsbEnumerateNewDev: device %d is now in CONFIGED state\n", Address));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumerateNewDev: device %d is now in CONFIGED state\n", Address));\r
\r
//\r
// Host assigns and loads a device driver.\r
Status = UsbSelectConfig (Child, Config);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumerateNewDev: failed to create interfaces - %r\n", Status));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumerateNewDev: failed to create interfaces - %r\n", Status));\r
goto ON_ERROR;\r
}\r
\r
Status = HubApi->GetPortStatus (HubIf, Port, &PortState);\r
\r
if (EFI_ERROR (Status)) {\r
- USB_ERROR (("UsbEnumeratePort: failed to get state of port %d\n", Port));\r
+ DEBUG ((EFI_D_ERROR, "UsbEnumeratePort: failed to get state of port %d\n", Port));\r
return Status;\r
}\r
\r
return EFI_SUCCESS;\r
}\r
\r
- USB_DEBUG (("UsbEnumeratePort: port %d state - %x, change - %x\n",\r
+ DEBUG (( EFI_D_INFO, "UsbEnumeratePort: port %d state - %x, change - %x\n",\r
Port, PortState.PortStatus, PortState.PortChangeStatus));\r
\r
//\r
// which probably is caused by short circuit. It has to wait system hardware\r
// to perform recovery.\r
//\r
- USB_DEBUG (("UsbEnumeratePort: Critical Over Current\n", Port));\r
+ DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: Critical Over Current\n", Port));\r
return EFI_DEVICE_ERROR;\r
\r
} else {\r
// over current. As a result, all ports are nearly power-off, so\r
// it's necessary to detach and enumerate all ports again. \r
//\r
- USB_DEBUG (("UsbEnumeratePort: 2.0 device Recovery Over Current\n", Port)); \r
+ DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 2.0 device Recovery Over Current\n", Port)); \r
goto ON_ENUMERATE;\r
\r
}\r
// on 2.0 roothub does. When over-current has influence on 1.1 device, the port \r
// would be disabled, so it's also necessary to detach and enumerate again.\r
//\r
- USB_DEBUG (("UsbEnumeratePort: 1.1 device Recovery Over Current\n", Port));\r
+ DEBUG (( EFI_D_ERROR, "UsbEnumeratePort: 1.1 device Recovery Over Current\n", Port));\r
goto ON_ENUMERATE;\r
}\r
\r
Child = UsbFindChild (HubIf, Port);\r
\r
if (Child != NULL) {\r
- USB_DEBUG (("UsbEnumeratePort: device at port %d removed from system\n", Port));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumeratePort: device at port %d removed from system\n", Port));\r
UsbRemoveDevice (Child);\r
}\r
\r
//\r
// Now, new device connected, enumerate and configure the device \r
//\r
- USB_DEBUG (("UsbEnumeratePort: new device connected at port %d\n", Port));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumeratePort: new device connected at port %d\n", Port));\r
Status = UsbEnumerateNewDev (HubIf, Port);\r
\r
} else {\r
- USB_DEBUG (("UsbEnumeratePort: device disconnected event on port %d\n", Port));\r
+ DEBUG (( EFI_D_INFO, "UsbEnumeratePort: device disconnected event on port %d\n", Port));\r
}\r
\r
HubApi->ClearPortChange (HubIf, Port);\r