DXE Dispatcher.\r
\r
Step #1 - When a FV protocol is added to the system every driver in the FV\r
- is added to the mDiscoveredList. The SOR, Before, and After Depex are \r
- pre-processed as drivers are added to the mDiscoveredList. If an Apriori \r
- file exists in the FV those drivers are addeded to the \r
- mScheduledQueue. The mFvHandleList is used to make sure a \r
+ is added to the mDiscoveredList. The SOR, Before, and After Depex are\r
+ pre-processed as drivers are added to the mDiscoveredList. If an Apriori\r
+ file exists in the FV those drivers are addeded to the\r
+ mScheduledQueue. The mFvHandleList is used to make sure a\r
FV is only processed once.\r
\r
Step #2 - Dispatch. Remove driver from the mScheduledQueue and load and\r
- start it. After mScheduledQueue is drained check the \r
- mDiscoveredList to see if any item has a Depex that is ready to \r
+ start it. After mScheduledQueue is drained check the\r
+ mDiscoveredList to see if any item has a Depex that is ready to\r
be placed on the mScheduledQueue.\r
\r
- Step #3 - Adding to the mScheduledQueue requires that you process Before \r
+ Step #3 - Adding to the mScheduledQueue requires that you process Before\r
and After dependencies. This is done recursively as the call to add\r
- to the mScheduledQueue checks for Before and recursively adds \r
- all Befores. It then addes the item that was passed in and then \r
+ to the mScheduledQueue checks for Before and recursively adds\r
+ all Befores. It then addes the item that was passed in and then\r
processess the After dependecies by recursively calling the routine.\r
\r
Dispatcher Rules:\r
- The rules for the dispatcher are in chapter 10 of the DXE CIS. Figure 10-3 \r
+ The rules for the dispatcher are in chapter 10 of the DXE CIS. Figure 10-3\r
is the state diagram for the DXE dispatcher\r
\r
Depex - Dependency Expresion.\r
SOR - Schedule On Request - Don't schedule if this bit is set.\r
\r
-Copyright (c) 2006 - 2008, Intel Corporation. <BR>\r
-All rights reserved. This program and the accompanying materials\r
+Copyright (c) 2006 - 2017, Intel Corporation. All rights reserved.<BR>\r
+This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at\r
http://opensource.org/licenses/bsd-license.php\r
\r
**/\r
\r
-#include <DxeMain.h>\r
+#include "DxeMain.h"\r
\r
//\r
// The Driver List contains one copy of every driver that has been discovered.\r
// Items are never removed from the driver list. List of EFI_CORE_DRIVER_ENTRY\r
//\r
-LIST_ENTRY mDiscoveredList = INITIALIZE_LIST_HEAD_VARIABLE (mDiscoveredList); \r
+LIST_ENTRY mDiscoveredList = INITIALIZE_LIST_HEAD_VARIABLE (mDiscoveredList);\r
\r
//\r
// Queue of drivers that are ready to dispatch. This queue is a subset of the\r
//\r
// List of file types supported by dispatcher\r
//\r
-EFI_FV_FILETYPE mDxeFileTypes[] = { \r
- EFI_FV_FILETYPE_DRIVER, \r
- EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER, \r
+EFI_FV_FILETYPE mDxeFileTypes[] = {\r
+ EFI_FV_FILETYPE_DRIVER,\r
+ EFI_FV_FILETYPE_COMBINED_SMM_DXE,\r
+ EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER,\r
EFI_FV_FILETYPE_DXE_CORE,\r
EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE\r
};\r
\r
FV_FILEPATH_DEVICE_PATH mFvDevicePath;\r
\r
-\r
//\r
// Function Prototypes\r
//\r
CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (\r
IN EFI_CORE_DRIVER_ENTRY *InsertedDriverEntry\r
);\r
- \r
+\r
/**\r
Event notification that is fired every time a FV dispatch protocol is added.\r
More than one protocol may have been added when this event is fired, so you\r
While you are at it read the A Priori file into memory.\r
Place drivers in the A Priori list onto the mScheduledQueue.\r
\r
- @param Event The Event that is being processed, not used. \r
+ @param Event The Event that is being processed, not used.\r
@param Context Event Context, not used.\r
\r
**/\r
);\r
\r
/**\r
- Convert FvHandle and DriverName into an EFI device path.\r
+ Convert FvHandle and DriverName into an EFI device path\r
\r
- @param Fv Fv protocol, needed to read Depex info out of \r
- FLASH. \r
- @param FvHandle Handle for Fv, needed in the \r
- EFI_CORE_DRIVER_ENTRY so that the PE image can be \r
- read out of the FV at a later time. \r
- @param DriverName Name of driver to add to mDiscoveredList. \r
+ @param Fv Fv protocol, needed to read Depex info out of\r
+ FLASH.\r
+ @param FvHandle Handle for Fv, needed in the\r
+ EFI_CORE_DRIVER_ENTRY so that the PE image can be\r
+ read out of the FV at a later time.\r
+ @param DriverName Name of driver to add to mDiscoveredList.\r
\r
@return Pointer to device path constructed from FvHandle and DriverName\r
\r
The Discovered list is never free'ed and contains booleans that represent the\r
other possible DXE driver states.\r
\r
- @param Fv Fv protocol, needed to read Depex info out of \r
- FLASH. \r
- @param FvHandle Handle for Fv, needed in the \r
- EFI_CORE_DRIVER_ENTRY so that the PE image can be \r
- read out of the FV at a later time. \r
- @param DriverName Name of driver to add to mDiscoveredList. \r
-\r
- @retval EFI_SUCCESS If driver was added to the mDiscoveredList. \r
- @retval EFI_ALREADY_STARTED The driver has already been started. Only one \r
- DriverName may be active in the system at any one \r
+ @param Fv Fv protocol, needed to read Depex info out of\r
+ FLASH.\r
+ @param FvHandle Handle for Fv, needed in the\r
+ EFI_CORE_DRIVER_ENTRY so that the PE image can be\r
+ read out of the FV at a later time.\r
+ @param DriverName Name of driver to add to mDiscoveredList.\r
+ @param Type Fv File Type of file to add to mDiscoveredList.\r
+\r
+ @retval EFI_SUCCESS If driver was added to the mDiscoveredList.\r
+ @retval EFI_ALREADY_STARTED The driver has already been started. Only one\r
+ DriverName may be active in the system at any one\r
time.\r
\r
**/\r
CoreAddToDriverList (\r
IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r
IN EFI_HANDLE FvHandle,\r
- IN EFI_GUID *DriverName\r
+ IN EFI_GUID *DriverName,\r
+ IN EFI_FV_FILETYPE Type\r
);\r
\r
/**\r
Get the driver from the FV through driver name, and produce a FVB protocol on FvHandle.\r
\r
- @param Fv The FIRMWARE_VOLUME protocol installed on the FV. \r
- @param FvHandle The handle which FVB protocol installed on. \r
- @param DriverName The driver guid specified. \r
+ @param Fv The FIRMWARE_VOLUME protocol installed on the FV.\r
+ @param FvHandle The handle which FVB protocol installed on.\r
+ @param DriverName The driver guid specified.\r
\r
- @retval EFI_OUT_OF_RESOURCES No enough memory or other resource. \r
- @retval EFI_VOLUME_CORRUPTED Corrupted volume. \r
+ @retval EFI_OUT_OF_RESOURCES No enough memory or other resource.\r
+ @retval EFI_VOLUME_CORRUPTED Corrupted volume.\r
@retval EFI_SUCCESS Function successfully returned.\r
\r
**/\r
-EFI_STATUS \r
+EFI_STATUS\r
CoreProcessFvImageFile (\r
IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r
IN EFI_HANDLE FvHandle,\r
Read Depex and pre-process the Depex for Before and After. If Section Extraction\r
protocol returns an error via ReadSection defer the reading of the Depex.\r
\r
- @param DriverEntry Driver to work on. \r
+ @param DriverEntry Driver to work on.\r
\r
- @retval EFI_SUCCESS Depex read and preprossesed \r
- @retval EFI_PROTOCOL_ERROR The section extraction protocol returned an error \r
- and Depex reading needs to be retried. \r
+ @retval EFI_SUCCESS Depex read and preprossesed\r
+ @retval EFI_PROTOCOL_ERROR The section extraction protocol returned an error\r
+ and Depex reading needs to be retried.\r
@retval Error DEPEX not found.\r
\r
**/\r
UINT32 AuthenticationStatus;\r
EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;\r
\r
- \r
+\r
Fv = DriverEntry->Fv;\r
\r
//\r
//\r
SectionType = EFI_SECTION_DXE_DEPEX;\r
Status = Fv->ReadSection (\r
- DriverEntry->Fv, \r
+ DriverEntry->Fv,\r
&DriverEntry->FileName,\r
- SectionType, \r
- 0, \r
- &DriverEntry->Depex, \r
+ SectionType,\r
+ 0,\r
+ &DriverEntry->Depex,\r
(UINTN *)&DriverEntry->DepexSize,\r
&AuthenticationStatus\r
);\r
//\r
CorePreProcessDepex (DriverEntry);\r
DriverEntry->DepexProtocolError = FALSE;\r
- } \r
+ }\r
\r
return Status;\r
}\r
Check every driver and locate a matching one. If the driver is found, the Unrequested\r
state flag is cleared.\r
\r
- @param FirmwareVolumeHandle The handle of the Firmware Volume that contains \r
- the firmware file specified by DriverName. \r
- @param DriverName The Driver name to put in the Dependent state. \r
+ @param FirmwareVolumeHandle The handle of the Firmware Volume that contains\r
+ the firmware file specified by DriverName.\r
+ @param DriverName The Driver name to put in the Dependent state.\r
\r
- @retval EFI_SUCCESS The DriverName was found and it's SOR bit was \r
- cleared \r
- @retval EFI_NOT_FOUND The DriverName does not exist or it's SOR bit was \r
- not set. \r
+ @retval EFI_SUCCESS The DriverName was found and it's SOR bit was\r
+ cleared\r
+ @retval EFI_NOT_FOUND The DriverName does not exist or it's SOR bit was\r
+ not set.\r
\r
**/\r
EFI_STATUS\r
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r
DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE);\r
if (DriverEntry->FvHandle == FirmwareVolumeHandle &&\r
- DriverEntry->Unrequested && \r
+ DriverEntry->Unrequested &&\r
CompareGuid (DriverName, &DriverEntry->FileName)) {\r
//\r
// Move the driver from the Unrequested to the Dependent state\r
DriverEntry->Unrequested = FALSE;\r
DriverEntry->Dependent = TRUE;\r
CoreReleaseDispatcherLock ();\r
- \r
+\r
+ DEBUG ((DEBUG_DISPATCH, "Schedule FFS(%g) - EFI_SUCCESS\n", DriverName));\r
+ \r
return EFI_SUCCESS;\r
}\r
}\r
- return EFI_NOT_FOUND; \r
+ \r
+ DEBUG ((DEBUG_DISPATCH, "Schedule FFS(%g) - EFI_NOT_FOUND\n", DriverName));\r
+ \r
+ return EFI_NOT_FOUND;\r
}\r
\r
\r
/**\r
Convert a driver from the Untrused back to the Scheduled state.\r
\r
- @param FirmwareVolumeHandle The handle of the Firmware Volume that contains \r
- the firmware file specified by DriverName. \r
- @param DriverName The Driver name to put in the Scheduled state \r
+ @param FirmwareVolumeHandle The handle of the Firmware Volume that contains\r
+ the firmware file specified by DriverName.\r
+ @param DriverName The Driver name to put in the Scheduled state\r
\r
- @retval EFI_SUCCESS The file was found in the untrusted state, and it \r
- was promoted to the trusted state. \r
- @retval EFI_NOT_FOUND The file was not found in the untrusted state. \r
+ @retval EFI_SUCCESS The file was found in the untrusted state, and it\r
+ was promoted to the trusted state.\r
+ @retval EFI_NOT_FOUND The file was not found in the untrusted state.\r
\r
**/\r
EFI_STATUS\r
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r
DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE);\r
if (DriverEntry->FvHandle == FirmwareVolumeHandle &&\r
- DriverEntry->Untrusted && \r
+ DriverEntry->Untrusted &&\r
CompareGuid (DriverName, &DriverEntry->FileName)) {\r
//\r
// Transition driver from Untrusted to Scheduled state.\r
DriverEntry->Scheduled = TRUE;\r
InsertTailList (&mScheduledQueue, &DriverEntry->ScheduledLink);\r
CoreReleaseDispatcherLock ();\r
- \r
+\r
return EFI_SUCCESS;\r
}\r
}\r
- return EFI_NOT_FOUND; \r
+ return EFI_NOT_FOUND;\r
}\r
\r
-\r
-\r
/**\r
This is the main Dispatcher for DXE and it exits when there are no more\r
drivers to run. Drain the mScheduledQueue and load and start a PE\r
will be called, and when the Bds() exits the Dispatcher will be called\r
again.\r
\r
- @retval EFI_ALREADY_STARTED The DXE Dispatcher is already running \r
- @retval EFI_NOT_FOUND No DXE Drivers were dispatched \r
- @retval EFI_SUCCESS One or more DXE Drivers were dispatched \r
+ @retval EFI_ALREADY_STARTED The DXE Dispatcher is already running\r
+ @retval EFI_NOT_FOUND No DXE Drivers were dispatched\r
+ @retval EFI_SUCCESS One or more DXE Drivers were dispatched\r
\r
**/\r
EFI_STATUS\r
LIST_ENTRY *Link;\r
EFI_CORE_DRIVER_ENTRY *DriverEntry;\r
BOOLEAN ReadyToRun;\r
+ EFI_EVENT DxeDispatchEvent;\r
+ \r
\r
if (gDispatcherRunning) {\r
//\r
\r
gDispatcherRunning = TRUE;\r
\r
+ Status = CoreCreateEventEx (\r
+ EVT_NOTIFY_SIGNAL,\r
+ TPL_NOTIFY,\r
+ EfiEventEmptyFunction,\r
+ NULL,\r
+ &gEfiEventDxeDispatchGuid,\r
+ &DxeDispatchEvent\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ return Status;\r
+ }\r
\r
ReturnStatus = EFI_NOT_FOUND;\r
do {\r
// Untrused to Scheduled it would have already been loaded so we may need to\r
// skip the LoadImage\r
//\r
- if (DriverEntry->ImageHandle == NULL) {\r
+ if (DriverEntry->ImageHandle == NULL && !DriverEntry->IsFvImage) {\r
+ DEBUG ((DEBUG_INFO, "Loading driver %g\n", &DriverEntry->FileName));\r
Status = CoreLoadImage (\r
- FALSE, \r
- gDxeCoreImageHandle, \r
+ FALSE,\r
+ gDxeCoreImageHandle,\r
DriverEntry->FvFileDevicePath,\r
- NULL, \r
- 0, \r
+ NULL,\r
+ 0,\r
&DriverEntry->ImageHandle\r
);\r
\r
} else {\r
//\r
// The DXE Driver could not be loaded, and do not attempt to load or start it again.\r
- // Take driver from Scheduled to Initialized. \r
+ // Take driver from Scheduled to Initialized.\r
//\r
// This case include the Never Trusted state if EFI_ACCESS_DENIED is returned\r
//\r
\r
DriverEntry->Scheduled = FALSE;\r
RemoveEntryList (&DriverEntry->ScheduledLink);\r
- \r
+\r
CoreReleaseDispatcherLock ();\r
- \r
+\r
//\r
// If it's an error don't try the StartImage\r
//\r
DriverEntry->Scheduled = FALSE;\r
DriverEntry->Initialized = TRUE;\r
RemoveEntryList (&DriverEntry->ScheduledLink);\r
- \r
+\r
CoreReleaseDispatcherLock ();\r
\r
- CoreReportProgressCodeSpecific (\r
- FixedPcdGet32(PcdStatusCodeValueDxeDriverBegin), \r
- DriverEntry->ImageHandle\r
- );\r
- Status = CoreStartImage (DriverEntry->ImageHandle, NULL, NULL);\r
- CoreReportProgressCodeSpecific (\r
- FixedPcdGet32(PcdStatusCodeValueDxeDriverEnd), \r
- DriverEntry->ImageHandle\r
- );\r
+ \r
+ if (DriverEntry->IsFvImage) {\r
+ //\r
+ // Produce a firmware volume block protocol for FvImage so it gets dispatched from. \r
+ //\r
+ Status = CoreProcessFvImageFile (DriverEntry->Fv, DriverEntry->FvHandle, &DriverEntry->FileName);\r
+ } else {\r
+ REPORT_STATUS_CODE_WITH_EXTENDED_DATA (\r
+ EFI_PROGRESS_CODE,\r
+ (EFI_SOFTWARE_DXE_CORE | EFI_SW_PC_INIT_BEGIN),\r
+ &DriverEntry->ImageHandle,\r
+ sizeof (DriverEntry->ImageHandle)\r
+ );\r
+ ASSERT (DriverEntry->ImageHandle != NULL);\r
+ \r
+ Status = CoreStartImage (DriverEntry->ImageHandle, NULL, NULL);\r
+ \r
+ REPORT_STATUS_CODE_WITH_EXTENDED_DATA (\r
+ EFI_PROGRESS_CODE,\r
+ (EFI_SOFTWARE_DXE_CORE | EFI_SW_PC_INIT_END),\r
+ &DriverEntry->ImageHandle,\r
+ sizeof (DriverEntry->ImageHandle)\r
+ );\r
+ }\r
\r
ReturnStatus = EFI_SUCCESS;\r
}\r
\r
+ //\r
+ // Now DXE Dispatcher finished one round of dispatch, signal an event group\r
+ // so that SMM Dispatcher get chance to dispatch SMM Drivers which depend\r
+ // on UEFI protocols\r
+ //\r
+ if (!EFI_ERROR (ReturnStatus)) {\r
+ CoreSignalEvent (DxeDispatchEvent);\r
+ }\r
+\r
//\r
// Search DriverList for items to place on Scheduled Queue\r
//\r
// If Section Extraction Protocol did not let the Depex be read before retry the read\r
//\r
Status = CoreGetDepexSectionAndPreProccess (DriverEntry);\r
- } \r
+ }\r
\r
if (DriverEntry->Dependent) {\r
if (CoreIsSchedulable (DriverEntry)) {\r
- CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry); \r
+ CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r
ReadyToRun = TRUE;\r
- } \r
+ }\r
+ } else {\r
+ if (DriverEntry->Unrequested) {\r
+ DEBUG ((DEBUG_DISPATCH, "Evaluate DXE DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r
+ DEBUG ((DEBUG_DISPATCH, " SOR = Not Requested\n"));\r
+ DEBUG ((DEBUG_DISPATCH, " RESULT = FALSE\n"));\r
+ }\r
}\r
}\r
} while (ReadyToRun);\r
\r
+ //\r
+ // Close DXE dispatch Event\r
+ //\r
+ CoreCloseEvent (DxeDispatchEvent);\r
+\r
gDispatcherRunning = FALSE;\r
\r
return ReturnStatus;\r
//\r
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r
DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE);\r
- if (DriverEntry->Before && DriverEntry->Dependent) {\r
+ if (DriverEntry->Before && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {\r
+ DEBUG ((DEBUG_DISPATCH, "Evaluate DXE DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r
+ DEBUG ((DEBUG_DISPATCH, " BEFORE FFS(%g) = ", &DriverEntry->BeforeAfterGuid));\r
if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {\r
//\r
// Recursively process BEFORE\r
//\r
+ DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));\r
CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r
+ } else {\r
+ DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));\r
}\r
}\r
}\r
InsertedDriverEntry->Dependent = FALSE;\r
InsertedDriverEntry->Scheduled = TRUE;\r
InsertTailList (&mScheduledQueue, &InsertedDriverEntry->ScheduledLink);\r
- \r
+\r
CoreReleaseDispatcherLock ();\r
\r
//\r
//\r
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r
DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE);\r
- if (DriverEntry->After && DriverEntry->Dependent) {\r
+ if (DriverEntry->After && DriverEntry->Dependent && DriverEntry != InsertedDriverEntry) {\r
+ DEBUG ((DEBUG_DISPATCH, "Evaluate DXE DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r
+ DEBUG ((DEBUG_DISPATCH, " AFTER FFS(%g) = ", &DriverEntry->BeforeAfterGuid));\r
if (CompareGuid (&InsertedDriverEntry->FileName, &DriverEntry->BeforeAfterGuid)) {\r
//\r
// Recursively process AFTER\r
//\r
+ DEBUG ((DEBUG_DISPATCH, "TRUE\n END\n RESULT = TRUE\n"));\r
CoreInsertOnScheduledQueueWhileProcessingBeforeAndAfter (DriverEntry);\r
+ } else {\r
+ DEBUG ((DEBUG_DISPATCH, "FALSE\n END\n RESULT = FALSE\n"));\r
}\r
}\r
}\r
/**\r
Return TRUE if the Fv has been processed, FALSE if not.\r
\r
- @param FvHandle The handle of a FV that's being tested \r
+ @param FvHandle The handle of a FV that's being tested\r
\r
- @retval TRUE Fv protocol on FvHandle has been processed \r
+ @retval TRUE Fv protocol on FvHandle has been processed\r
@retval FALSE Fv protocol on FvHandle has not yet been processed\r
\r
**/\r
\r
/**\r
Remember that Fv protocol on FvHandle has had it's drivers placed on the\r
- mDiscoveredList. This fucntion adds entries on the mFvHandleList. Items are\r
- never removed/freed from the mFvHandleList.\r
+ mDiscoveredList. This fucntion adds entries on the mFvHandleList if new \r
+ entry is different from one in mFvHandleList by checking FvImage Guid.\r
+ Items are never removed/freed from the mFvHandleList.\r
\r
@param FvHandle The handle of a FV that has been processed\r
\r
+ @return A point to new added FvHandle entry. If FvHandle with the same FvImage guid\r
+ has been added, NULL will return. \r
+\r
**/\r
-VOID\r
+KNOWN_HANDLE * \r
FvIsBeingProcesssed (\r
IN EFI_HANDLE FvHandle\r
)\r
{\r
- KNOWN_HANDLE *KnownHandle;\r
+ EFI_STATUS Status;\r
+ EFI_GUID FvNameGuid;\r
+ BOOLEAN FvNameGuidIsFound;\r
+ UINT32 ExtHeaderOffset;\r
+ EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb;\r
+ EFI_FIRMWARE_VOLUME_HEADER *FwVolHeader;\r
+ EFI_FV_BLOCK_MAP_ENTRY *BlockMap;\r
+ UINTN LbaOffset;\r
+ UINTN Index;\r
+ EFI_LBA LbaIndex;\r
+ LIST_ENTRY *Link;\r
+ KNOWN_HANDLE *KnownHandle;\r
+\r
+ FwVolHeader = NULL;\r
+\r
+ //\r
+ // Get the FirmwareVolumeBlock protocol on that handle\r
+ //\r
+ FvNameGuidIsFound = FALSE;\r
+ Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolumeBlockProtocolGuid, (VOID **)&Fvb);\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Get the full FV header based on FVB protocol.\r
+ //\r
+ ASSERT (Fvb != NULL);\r
+ Status = GetFwVolHeader (Fvb, &FwVolHeader);\r
+ if (!EFI_ERROR (Status)) {\r
+ ASSERT (FwVolHeader != NULL);\r
+ if (VerifyFvHeaderChecksum (FwVolHeader) && FwVolHeader->ExtHeaderOffset != 0) {\r
+ ExtHeaderOffset = (UINT32) FwVolHeader->ExtHeaderOffset;\r
+ BlockMap = FwVolHeader->BlockMap;\r
+ LbaIndex = 0;\r
+ LbaOffset = 0;\r
+ //\r
+ // Find LbaIndex and LbaOffset for FV extension header based on BlockMap.\r
+ //\r
+ while ((BlockMap->NumBlocks != 0) || (BlockMap->Length != 0)) {\r
+ for (Index = 0; Index < BlockMap->NumBlocks && ExtHeaderOffset >= BlockMap->Length; Index ++) {\r
+ ExtHeaderOffset -= BlockMap->Length;\r
+ LbaIndex ++;\r
+ }\r
+ //\r
+ // Check whether FvExtHeader is crossing the multi block range.\r
+ //\r
+ if (Index < BlockMap->NumBlocks) {\r
+ LbaOffset = ExtHeaderOffset;\r
+ break;\r
+ }\r
+ BlockMap++;\r
+ }\r
+ //\r
+ // Read FvNameGuid from FV extension header.\r
+ //\r
+ Status = ReadFvbData (Fvb, &LbaIndex, &LbaOffset, sizeof (FvNameGuid), (UINT8 *) &FvNameGuid);\r
+ if (!EFI_ERROR (Status)) {\r
+ FvNameGuidIsFound = TRUE;\r
+ }\r
+ }\r
+ CoreFreePool (FwVolHeader);\r
+ }\r
+ }\r
\r
- KnownHandle = CoreAllocateBootServicesPool (sizeof (KNOWN_HANDLE));\r
+ if (FvNameGuidIsFound) {\r
+ //\r
+ // Check whether the FV image with the found FvNameGuid has been processed.\r
+ //\r
+ for (Link = mFvHandleList.ForwardLink; Link != &mFvHandleList; Link = Link->ForwardLink) {\r
+ KnownHandle = CR(Link, KNOWN_HANDLE, Link, KNOWN_HANDLE_SIGNATURE);\r
+ if (CompareGuid (&FvNameGuid, &KnownHandle->FvNameGuid)) {\r
+ DEBUG ((EFI_D_ERROR, "FvImage on FvHandle %p and %p has the same FvNameGuid %g.\n", FvHandle, KnownHandle->Handle, &FvNameGuid));\r
+ return NULL;\r
+ }\r
+ }\r
+ }\r
+\r
+ KnownHandle = AllocateZeroPool (sizeof (KNOWN_HANDLE));\r
ASSERT (KnownHandle != NULL);\r
\r
KnownHandle->Signature = KNOWN_HANDLE_SIGNATURE;\r
KnownHandle->Handle = FvHandle;\r
+ if (FvNameGuidIsFound) {\r
+ CopyGuid (&KnownHandle->FvNameGuid, &FvNameGuid);\r
+ }\r
InsertTailList (&mFvHandleList, &KnownHandle->Link);\r
+ return KnownHandle;\r
}\r
\r
\r
/**\r
Convert FvHandle and DriverName into an EFI device path\r
\r
- @param Fv Fv protocol, needed to read Depex info out of \r
- FLASH. \r
- @param FvHandle Handle for Fv, needed in the \r
- EFI_CORE_DRIVER_ENTRY so that the PE image can be \r
- read out of the FV at a later time. \r
- @param DriverName Name of driver to add to mDiscoveredList. \r
+ @param Fv Fv protocol, needed to read Depex info out of\r
+ FLASH.\r
+ @param FvHandle Handle for Fv, needed in the\r
+ EFI_CORE_DRIVER_ENTRY so that the PE image can be\r
+ read out of the FV at a later time.\r
+ @param DriverName Name of driver to add to mDiscoveredList.\r
\r
@return Pointer to device path constructed from FvHandle and DriverName\r
\r
// Build a device path to the file in the FV to pass into gBS->LoadImage\r
//\r
EfiInitializeFwVolDevicepathNode (&mFvDevicePath.File, DriverName);\r
- mFvDevicePath.End.Type = EFI_END_ENTIRE_DEVICE_PATH;\r
- mFvDevicePath.End.SubType = END_ENTIRE_DEVICE_PATH_SUBTYPE;\r
- SetDevicePathNodeLength (&mFvDevicePath.End, sizeof (EFI_DEVICE_PATH_PROTOCOL));\r
+ SetDevicePathEndNode (&mFvDevicePath.End);\r
\r
- FileNameDevicePath = CoreAppendDevicePath (\r
- FvDevicePath, \r
+ FileNameDevicePath = AppendDevicePath (\r
+ FvDevicePath,\r
(EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath\r
);\r
}\r
The Discovered list is never free'ed and contains booleans that represent the\r
other possible DXE driver states.\r
\r
- @param Fv Fv protocol, needed to read Depex info out of \r
- FLASH. \r
- @param FvHandle Handle for Fv, needed in the \r
- EFI_CORE_DRIVER_ENTRY so that the PE image can be \r
- read out of the FV at a later time. \r
- @param DriverName Name of driver to add to mDiscoveredList. \r
-\r
- @retval EFI_SUCCESS If driver was added to the mDiscoveredList. \r
- @retval EFI_ALREADY_STARTED The driver has already been started. Only one \r
- DriverName may be active in the system at any one \r
+ @param Fv Fv protocol, needed to read Depex info out of\r
+ FLASH.\r
+ @param FvHandle Handle for Fv, needed in the\r
+ EFI_CORE_DRIVER_ENTRY so that the PE image can be\r
+ read out of the FV at a later time.\r
+ @param DriverName Name of driver to add to mDiscoveredList.\r
+ @param Type Fv File Type of file to add to mDiscoveredList.\r
+\r
+ @retval EFI_SUCCESS If driver was added to the mDiscoveredList.\r
+ @retval EFI_ALREADY_STARTED The driver has already been started. Only one\r
+ DriverName may be active in the system at any one\r
time.\r
\r
**/\r
CoreAddToDriverList (\r
IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r
IN EFI_HANDLE FvHandle,\r
- IN EFI_GUID *DriverName\r
+ IN EFI_GUID *DriverName,\r
+ IN EFI_FV_FILETYPE Type\r
)\r
{\r
EFI_CORE_DRIVER_ENTRY *DriverEntry;\r
\r
- \r
+\r
//\r
- // Create the Driver Entry for the list. ZeroPool initializes lots of variables to \r
+ // Create the Driver Entry for the list. ZeroPool initializes lots of variables to\r
// NULL or FALSE.\r
//\r
- DriverEntry = CoreAllocateZeroBootServicesPool (sizeof (EFI_CORE_DRIVER_ENTRY));\r
+ DriverEntry = AllocateZeroPool (sizeof (EFI_CORE_DRIVER_ENTRY));\r
ASSERT (DriverEntry != NULL);\r
+ if (Type == EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE) {\r
+ DriverEntry->IsFvImage = TRUE;\r
+ }\r
\r
DriverEntry->Signature = EFI_CORE_DRIVER_ENTRY_SIGNATURE;\r
CopyGuid (&DriverEntry->FileName, DriverName);\r
DriverEntry->FvFileDevicePath = CoreFvToDevicePath (Fv, FvHandle, DriverName);\r
\r
CoreGetDepexSectionAndPreProccess (DriverEntry);\r
- \r
+\r
CoreAcquireDispatcherLock ();\r
- \r
+\r
InsertTailList (&mDiscoveredList, &DriverEntry->Link);\r
\r
CoreReleaseDispatcherLock ();\r
Check if a FV Image type file (EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE) is\r
described by a EFI_HOB_FIRMWARE_VOLUME2 Hob.\r
\r
- @param FvHandle The handle which FVB protocol installed on. \r
- @param DriverName The driver guid specified. \r
+ @param FvNameGuid The FV image guid specified.\r
+ @param DriverName The driver guid specified.\r
\r
- @retval TRUE This file is found in a EFI_HOB_FIRMWARE_VOLUME2 \r
- Hob. \r
+ @retval TRUE This file is found in a EFI_HOB_FIRMWARE_VOLUME2\r
+ Hob.\r
@retval FALSE Not found.\r
\r
**/\r
BOOLEAN\r
FvFoundInHobFv2 (\r
- IN EFI_HANDLE FvHandle,\r
+ IN CONST EFI_GUID *FvNameGuid,\r
IN CONST EFI_GUID *DriverName\r
)\r
{\r
EFI_PEI_HOB_POINTERS HobFv2;\r
- \r
+\r
HobFv2.Raw = GetHobList ();\r
- \r
+\r
while ((HobFv2.Raw = GetNextHob (EFI_HOB_TYPE_FV2, HobFv2.Raw)) != NULL) {\r
- if (CompareGuid (DriverName, &HobFv2.FirmwareVolume2->FileName)) {\r
+ //\r
+ // Compare parent FvNameGuid and FileGuid both.\r
+ //\r
+ if (CompareGuid (DriverName, &HobFv2.FirmwareVolume2->FileName) &&\r
+ CompareGuid (FvNameGuid, &HobFv2.FirmwareVolume2->FvName)) {\r
return TRUE;\r
}\r
HobFv2.Raw = GET_NEXT_HOB (HobFv2);\r
/**\r
Get the driver from the FV through driver name, and produce a FVB protocol on FvHandle.\r
\r
- @param Fv The FIRMWARE_VOLUME protocol installed on the FV. \r
- @param FvHandle The handle which FVB protocol installed on. \r
- @param DriverName The driver guid specified. \r
+ @param Fv The FIRMWARE_VOLUME protocol installed on the FV.\r
+ @param FvHandle The handle which FVB protocol installed on.\r
+ @param DriverName The driver guid specified.\r
\r
- @retval EFI_OUT_OF_RESOURCES No enough memory or other resource. \r
- @retval EFI_VOLUME_CORRUPTED Corrupted volume. \r
+ @retval EFI_OUT_OF_RESOURCES No enough memory or other resource.\r
+ @retval EFI_VOLUME_CORRUPTED Corrupted volume.\r
@retval EFI_SUCCESS Function successfully returned.\r
\r
**/\r
-EFI_STATUS \r
+EFI_STATUS\r
CoreProcessFvImageFile (\r
IN EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv,\r
IN EFI_HANDLE FvHandle,\r
VOID *AlignedBuffer;\r
UINTN BufferSize;\r
EFI_FIRMWARE_VOLUME_HEADER *FvHeader;\r
- UINT32 FvAlignment; \r
+ UINT32 FvAlignment;\r
+ EFI_DEVICE_PATH_PROTOCOL *FvFileDevicePath;\r
\r
//\r
// Read the first (and only the first) firmware volume section\r
BufferSize = 0;\r
AlignedBuffer = NULL;\r
Status = Fv->ReadSection (\r
- Fv, \r
- DriverName, \r
- SectionType, \r
- 0, \r
- &Buffer, \r
+ Fv,\r
+ DriverName,\r
+ SectionType,\r
+ 0,\r
+ &Buffer,\r
&BufferSize,\r
&AuthenticationStatus\r
);\r
if (!EFI_ERROR (Status)) {\r
+ //\r
+ // Evaluate the authentication status of the Firmware Volume through\r
+ // Security Architectural Protocol\r
+ //\r
+ if (gSecurity != NULL) {\r
+ FvFileDevicePath = CoreFvToDevicePath (Fv, FvHandle, DriverName);\r
+ Status = gSecurity->FileAuthenticationState (\r
+ gSecurity,\r
+ AuthenticationStatus,\r
+ FvFileDevicePath\r
+ );\r
+ if (FvFileDevicePath != NULL) {\r
+ FreePool (FvFileDevicePath);\r
+ }\r
+\r
+ if (Status != EFI_SUCCESS) {\r
+ //\r
+ // Security check failed. The firmware volume should not be used for any purpose.\r
+ //\r
+ if (Buffer != NULL) {\r
+ FreePool (Buffer);\r
+ }\r
+ return Status;\r
+ }\r
+ }\r
+\r
//\r
// FvImage should be at its required alignment.\r
//\r
FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) Buffer;\r
- FvAlignment = 1 << ((FvHeader->Attributes & EFI_FVB2_ALIGNMENT) >> 16);\r
- //\r
- // FvAlignment must be more than 8 bytes required by FvHeader structure.\r
- // \r
- if (FvAlignment < 8) {\r
- FvAlignment = 8;\r
- }\r
//\r
- // Allocate the aligned buffer for the FvImage.\r
+ // If EFI_FVB2_WEAK_ALIGNMENT is set in the volume header then the first byte of the volume\r
+ // can be aligned on any power-of-two boundary. A weakly aligned volume can not be moved from\r
+ // its initial linked location and maintain its alignment.\r
//\r
- AlignedBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES (BufferSize), (UINTN) FvAlignment);\r
- if (AlignedBuffer == NULL) {\r
- Status = EFI_OUT_OF_RESOURCES;\r
- } else {\r
+ if ((FvHeader->Attributes & EFI_FVB2_WEAK_ALIGNMENT) != EFI_FVB2_WEAK_ALIGNMENT) {\r
//\r
- // Move FvImage into the aligned buffer and release the original buffer.\r
+ // Get FvHeader alignment\r
//\r
- CopyMem (AlignedBuffer, Buffer, BufferSize);\r
- CoreFreePool (Buffer);\r
- Buffer = NULL;\r
+ FvAlignment = 1 << ((FvHeader->Attributes & EFI_FVB2_ALIGNMENT) >> 16);\r
//\r
- // Produce a FVB protocol for the file\r
+ // FvAlignment must be greater than or equal to 8 bytes of the minimum FFS alignment value.\r
//\r
- Status = ProduceFVBProtocolOnBuffer (\r
- (EFI_PHYSICAL_ADDRESS) (UINTN) AlignedBuffer,\r
- (UINT64)BufferSize,\r
- FvHandle,\r
- NULL\r
- );\r
+ if (FvAlignment < 8) {\r
+ FvAlignment = 8;\r
+ }\r
+ //\r
+ // Allocate the aligned buffer for the FvImage.\r
+ //\r
+ AlignedBuffer = AllocateAlignedPages (EFI_SIZE_TO_PAGES (BufferSize), (UINTN) FvAlignment);\r
+ if (AlignedBuffer == NULL) {\r
+ FreePool (Buffer);\r
+ return EFI_OUT_OF_RESOURCES;\r
+ } else {\r
+ //\r
+ // Move FvImage into the aligned buffer and release the original buffer.\r
+ //\r
+ CopyMem (AlignedBuffer, Buffer, BufferSize);\r
+ FvHeader = (EFI_FIRMWARE_VOLUME_HEADER *) AlignedBuffer;\r
+ CoreFreePool (Buffer);\r
+ Buffer = NULL;\r
+ }\r
}\r
+ //\r
+ // Produce a FVB protocol for the file\r
+ //\r
+ Status = ProduceFVBProtocolOnBuffer (\r
+ (EFI_PHYSICAL_ADDRESS) (UINTN) FvHeader,\r
+ (UINT64)BufferSize,\r
+ FvHandle,\r
+ AuthenticationStatus,\r
+ NULL\r
+ );\r
}\r
\r
- if (EFI_ERROR (Status)) { \r
+ if (EFI_ERROR (Status)) {\r
//\r
// ReadSection or Produce FVB failed, Free data buffer\r
//\r
if (Buffer != NULL) {\r
- CoreFreePool (Buffer); \r
+ FreePool (Buffer);\r
}\r
- \r
+\r
if (AlignedBuffer != NULL) {\r
FreeAlignedPages (AlignedBuffer, EFI_SIZE_TO_PAGES (BufferSize));\r
}\r
While you are at it read the A Priori file into memory.\r
Place drivers in the A Priori list onto the mScheduledQueue.\r
\r
- @param Event The Event that is being processed, not used. \r
+ @param Event The Event that is being processed, not used.\r
@param Context Event Context, not used.\r
\r
**/\r
{\r
EFI_STATUS Status;\r
EFI_STATUS GetNextFileStatus;\r
- EFI_STATUS SecurityStatus;\r
EFI_FIRMWARE_VOLUME2_PROTOCOL *Fv;\r
EFI_DEVICE_PATH_PROTOCOL *FvDevicePath;\r
EFI_HANDLE FvHandle;\r
LIST_ENTRY *Link;\r
UINT32 AuthenticationStatus;\r
UINTN SizeOfBuffer;\r
+ VOID *DepexBuffer;\r
+ KNOWN_HANDLE *KnownHandle;\r
\r
+ FvHandle = NULL;\r
\r
while (TRUE) {\r
BufferSize = sizeof (EFI_HANDLE);\r
continue;\r
}\r
\r
- Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolumeDispatchProtocolGuid, (VOID **)&Fv);\r
- if (EFI_ERROR (Status)) {\r
+ //\r
+ // Since we are about to process this Fv mark it as processed.\r
+ //\r
+ KnownHandle = FvIsBeingProcesssed (FvHandle);\r
+ if (KnownHandle == NULL) {\r
//\r
- // If no dispatch protocol then skip, but do not marked as being processed as it\r
- // may show up later.\r
+ // The FV with the same FV name guid has already been processed. \r
+ // So lets skip it!\r
//\r
continue;\r
}\r
\r
- //\r
- // Since we are about to process this Fv mark it as processed.\r
- //\r
- FvIsBeingProcesssed (FvHandle);\r
-\r
Status = CoreHandleProtocol (FvHandle, &gEfiFirmwareVolume2ProtocolGuid, (VOID **)&Fv);\r
- if (EFI_ERROR (Status)) {\r
+ if (EFI_ERROR (Status) || Fv == NULL) {\r
//\r
- // The Handle has a FirmwareVolumeDispatch protocol and should also contiain\r
- // a FirmwareVolume protocol thus we should never get here.\r
+ // FvHandle must have Firmware Volume2 protocol thus we should never get here.\r
//\r
ASSERT (FALSE);\r
continue;\r
}\r
- \r
+\r
Status = CoreHandleProtocol (FvHandle, &gEfiDevicePathProtocolGuid, (VOID **)&FvDevicePath);\r
if (EFI_ERROR (Status)) {\r
//\r
//\r
continue;\r
}\r
- \r
- //\r
- // Evaluate the authentication status of the Firmware Volume through \r
- // Security Architectural Protocol\r
- //\r
- if (gSecurity != NULL) {\r
- SecurityStatus = gSecurity->FileAuthenticationState (\r
- gSecurity, \r
- 0, \r
- FvDevicePath\r
- );\r
- if (SecurityStatus != EFI_SUCCESS) {\r
- //\r
- // Security check failed. The firmware volume should not be used for any purpose.\r
- //\r
- continue;\r
- }\r
- } \r
- \r
+\r
//\r
- // Discover Drivers in FV and add them to the Discovered Driver List. \r
- // Process EFI_FV_FILETYPE_DRIVER type and then EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER \r
+ // Discover Drivers in FV and add them to the Discovered Driver List.\r
+ // Process EFI_FV_FILETYPE_DRIVER type and then EFI_FV_FILETYPE_COMBINED_PEIM_DRIVER\r
// EFI_FV_FILETYPE_DXE_CORE is processed to produce a Loaded Image protocol for the core\r
// EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE is processed to create a Fvb\r
//\r
do {\r
Type = mDxeFileTypes[Index];\r
GetNextFileStatus = Fv->GetNextFile (\r
- Fv, \r
+ Fv,\r
&Key,\r
- &Type, \r
- &NameGuid, \r
- &Attributes, \r
+ &Type,\r
+ &NameGuid,\r
+ &Attributes,\r
&Size\r
);\r
if (!EFI_ERROR (GetNextFileStatus)) {\r
// be initialized completely.\r
//\r
EfiInitializeFwVolDevicepathNode (&mFvDevicePath.File, &NameGuid);\r
- mFvDevicePath.End.Type = EFI_END_ENTIRE_DEVICE_PATH;\r
- mFvDevicePath.End.SubType = END_ENTIRE_DEVICE_PATH_SUBTYPE;\r
- SetDevicePathNodeLength (&mFvDevicePath.End, sizeof (EFI_DEVICE_PATH_PROTOCOL));\r
+ SetDevicePathEndNode (&mFvDevicePath.End);\r
\r
- gDxeCoreLoadedImage->FilePath = CoreDuplicateDevicePath (\r
+ gDxeCoreLoadedImage->FilePath = DuplicateDevicePath (\r
(EFI_DEVICE_PATH_PROTOCOL *)&mFvDevicePath\r
);\r
gDxeCoreLoadedImage->DeviceHandle = FvHandle;\r
}\r
} else if (Type == EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE) {\r
//\r
- // Check if this EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE file has already \r
+ // Check if this EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE file has already\r
// been extracted.\r
//\r
- if (FvFoundInHobFv2 (FvHandle, &NameGuid)) {\r
+ if (FvFoundInHobFv2 (&KnownHandle->FvNameGuid, &NameGuid)) {\r
continue;\r
}\r
+\r
+ //\r
+ // Check if this EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE file has SMM depex section.\r
+ //\r
+ DepexBuffer = NULL;\r
+ SizeOfBuffer = 0;\r
+ Status = Fv->ReadSection (\r
+ Fv,\r
+ &NameGuid,\r
+ EFI_SECTION_SMM_DEPEX,\r
+ 0,\r
+ &DepexBuffer,\r
+ &SizeOfBuffer,\r
+ &AuthenticationStatus\r
+ );\r
+ if (!EFI_ERROR (Status)) {\r
+ //\r
+ // If SMM depex section is found, this FV image is invalid to be supported.\r
+ // ASSERT FALSE to report this FV image. \r
+ //\r
+ FreePool (DepexBuffer);\r
+ ASSERT (FALSE);\r
+ }\r
+\r
//\r
- // Found a firmware volume image. Produce a firmware volume block\r
- // protocol for it so it gets dispatched from. This is usually a \r
- // capsule.\r
+ // Check if this EFI_FV_FILETYPE_FIRMWARE_VOLUME_IMAGE file has DXE depex section.\r
//\r
- CoreProcessFvImageFile (Fv, FvHandle, &NameGuid);\r
+ DepexBuffer = NULL;\r
+ SizeOfBuffer = 0;\r
+ Status = Fv->ReadSection (\r
+ Fv,\r
+ &NameGuid,\r
+ EFI_SECTION_DXE_DEPEX,\r
+ 0,\r
+ &DepexBuffer,\r
+ &SizeOfBuffer,\r
+ &AuthenticationStatus\r
+ );\r
+ if (EFI_ERROR (Status)) {\r
+ //\r
+ // If no depex section, produce a firmware volume block protocol for it so it gets dispatched from. \r
+ //\r
+ CoreProcessFvImageFile (Fv, FvHandle, &NameGuid);\r
+ } else {\r
+ //\r
+ // If depex section is found, this FV image will be dispatched until its depex is evaluated to TRUE.\r
+ //\r
+ FreePool (DepexBuffer);\r
+ CoreAddToDriverList (Fv, FvHandle, &NameGuid, Type);\r
+ }\r
} else {\r
//\r
// Transition driver from Undiscovered to Discovered state\r
//\r
- CoreAddToDriverList (Fv, FvHandle, &NameGuid);\r
+ CoreAddToDriverList (Fv, FvHandle, &NameGuid, Type);\r
}\r
}\r
} while (!EFI_ERROR (GetNextFileStatus));\r
}\r
- \r
+\r
//\r
// Read the array of GUIDs from the Apriori file if it is present in the firmware volume\r
//\r
// drivers not in the current FV and these must be skipped since the a priori list\r
// is only valid for the FV that it resided in.\r
//\r
- CoreAcquireDispatcherLock ();\r
- \r
+\r
for (Index = 0; Index < AprioriEntryCount; Index++) {\r
for (Link = mDiscoveredList.ForwardLink; Link != &mDiscoveredList; Link = Link->ForwardLink) {\r
DriverEntry = CR(Link, EFI_CORE_DRIVER_ENTRY, Link, EFI_CORE_DRIVER_ENTRY_SIGNATURE);\r
if (CompareGuid (&DriverEntry->FileName, &AprioriFile[Index]) &&\r
(FvHandle == DriverEntry->FvHandle)) {\r
+ CoreAcquireDispatcherLock ();\r
DriverEntry->Dependent = FALSE;\r
DriverEntry->Scheduled = TRUE;\r
InsertTailList (&mScheduledQueue, &DriverEntry->ScheduledLink);\r
+ CoreReleaseDispatcherLock ();\r
+ DEBUG ((DEBUG_DISPATCH, "Evaluate DXE DEPEX for FFS(%g)\n", &DriverEntry->FileName));\r
+ DEBUG ((DEBUG_DISPATCH, " RESULT = TRUE (Apriori)\n"));\r
break;\r
}\r
}\r
}\r
\r
- CoreReleaseDispatcherLock ();\r
-\r
//\r
- // Free data allocated by Fv->ReadSection () \r
+ // Free data allocated by Fv->ReadSection ()\r
//\r
- CoreFreePool (AprioriFile); \r
+ CoreFreePool (AprioriFile);\r
}\r
}\r
\r
VOID\r
)\r
{\r
- mFwVolEvent = CoreCreateProtocolNotifyEvent (\r
- &gEfiFirmwareVolume2ProtocolGuid, \r
+ mFwVolEvent = EfiCreateProtocolNotifyEvent (\r
+ &gEfiFirmwareVolume2ProtocolGuid,\r
TPL_CALLBACK,\r
CoreFwVolEventProtocolNotify,\r
NULL,\r
- &mFwVolEventRegistration,\r
- TRUE\r
+ &mFwVolEventRegistration\r
);\r
}\r
\r
projects / mirror_edk2.git / blobdiff