-/**@file\r
+/** @file\r
\r
Firmware File System protocol. Layers on top of Firmware\r
Block protocol to produce a file abstraction of FV based files.\r
\r
**/\r
\r
-#ifndef __FWVOL_H\r
-#define __FWVOL_H\r
+#ifndef __FW_VOL_DRIVER_H_\r
+#define __FW_VOL_DRIVER_H_\r
\r
\r
#define FV2_DEVICE_SIGNATURE EFI_SIGNATURE_32 ('_', 'F', 'V', '2')\r
\r
#define FV_DEVICE_FROM_THIS(a) CR(a, FV_DEVICE, Fv, FV2_DEVICE_SIGNATURE)\r
\r
+/**\r
+ Retrieves attributes, insures positive polarity of attribute bits, returns\r
+ resulting attributes in output parameter.\r
\r
+ @param This Calling context \r
+ @param Attributes output buffer which contains attributes \r
+\r
+ @retval EFI_SUCCESS Successfully got volume attributes\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvGetVolumeAttributes (\r
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,\r
OUT EFI_FV_ATTRIBUTES *Attributes\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Retrieves attributes, insures positive polarity of attribute bits, returns\r
- resulting attributes in output parameter\r
\r
-Arguments:\r
- This - Calling context\r
- Attributes - output buffer which contains attributes\r
+/**\r
+ Sets current attributes for volume\r
\r
-Returns:\r
- EFI_SUCCESS - Successfully got volume attributes\r
+ @param This Calling context \r
+ @param Attributes At input, contains attributes to be set. At output \r
+ contains new value of FV \r
\r
---*/\r
-;\r
+ @retval EFI_UNSUPPORTED Could not be set.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvSetVolumeAttributes (\r
IN CONST EFI_FIRMWARE_VOLUME2_PROTOCOL *This,\r
IN OUT EFI_FV_ATTRIBUTES *Attributes\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Sets current attributes for volume\r
+;\r
\r
-Arguments:\r
- This - Calling context\r
- Attributes - At input, contains attributes to be set. At output contains\r
- new value of FV\r
\r
-Returns:\r
- EFI_UNSUPPORTED - Could not be set.\r
---*/\r
-;\r
+/**\r
+ Given the input key, search for the next matching file in the volume.\r
+\r
+ @param This Indicates the calling context. \r
+ @param Key Key is a pointer to a caller allocated \r
+ buffer that contains implementation specific \r
+ data that is used to track where to begin \r
+ the search for the next file. The size of \r
+ the buffer must be at least This->KeySize \r
+ bytes long. To reinitialize the search and \r
+ begin from the beginning of the firmware \r
+ volume, the entire buffer must be cleared to \r
+ zero. Other than clearing the buffer to \r
+ initiate a new search, the caller must not \r
+ modify the data in the buffer between calls \r
+ to GetNextFile(). \r
+ @param FileType FileType is a pointer to a caller allocated \r
+ EFI_FV_FILETYPE. The GetNextFile() API can \r
+ filter it's search for files based on the \r
+ value of *FileType input. A *FileType input \r
+ of 0 causes GetNextFile() to search for \r
+ files of all types. If a file is found, the \r
+ file's type is returned in *FileType. \r
+ *FileType is not modified if no file is \r
+ found. \r
+ @param NameGuid NameGuid is a pointer to a caller allocated \r
+ EFI_GUID. If a file is found, the file's \r
+ name is returned in *NameGuid. *NameGuid is \r
+ not modified if no file is found. \r
+ @param Attributes Attributes is a pointer to a caller \r
+ allocated EFI_FV_FILE_ATTRIBUTES. If a file \r
+ is found, the file's attributes are returned \r
+ in *Attributes. *Attributes is not modified \r
+ if no file is found. \r
+ @param Size Size is a pointer to a caller allocated \r
+ UINTN. If a file is found, the file's size \r
+ is returned in *Size. *Size is not modified \r
+ if no file is found. \r
+\r
+ @retval EFI_SUCCESS Successfully find the file. \r
+ @retval EFI_DEVICE_ERROR Device error. \r
+ @retval EFI_ACCESS_DENIED Fv could not read. \r
+ @retval EFI_NOT_FOUND No matching file found. \r
+ @retval EFI_INVALID_PARAMETER Invalid parameter\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvGetNextFile (\r
OUT EFI_FV_FILE_ATTRIBUTES *Attributes,\r
OUT UINTN *Size\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Given the input key, search for the next matching file in the volume.\r
-\r
-Arguments:\r
- This - Indicates the calling context.\r
- FileType - FileType is a pointer to a caller allocated\r
- EFI_FV_FILETYPE. The GetNextFile() API can filter it's\r
- search for files based on the value of *FileType input.\r
- A *FileType input of 0 causes GetNextFile() to search for\r
- files of all types. If a file is found, the file's type\r
- is returned in *FileType. *FileType is not modified if\r
- no file is found.\r
- Key - Key is a pointer to a caller allocated buffer that\r
- contains implementation specific data that is used to\r
- track where to begin the search for the next file.\r
- The size of the buffer must be at least This->KeySize\r
- bytes long. To reinitialize the search and begin from\r
- the beginning of the firmware volume, the entire buffer\r
- must be cleared to zero. Other than clearing the buffer\r
- to initiate a new search, the caller must not modify the\r
- data in the buffer between calls to GetNextFile().\r
- NameGuid - NameGuid is a pointer to a caller allocated EFI_GUID.\r
- If a file is found, the file's name is returned in\r
- *NameGuid. *NameGuid is not modified if no file is\r
- found.\r
- Attributes - Attributes is a pointer to a caller allocated\r
- EFI_FV_FILE_ATTRIBUTES. If a file is found, the file's\r
- attributes are returned in *Attributes. *Attributes is\r
- not modified if no file is found.\r
- Size - Size is a pointer to a caller allocated UINTN.\r
- If a file is found, the file's size is returned in *Size.\r
- *Size is not modified if no file is found.\r
-\r
-Returns: \r
- EFI_SUCCESS - Successfully find the file.\r
- EFI_DEVICE_ERROR - Device error.\r
- EFI_ACCESS_DENIED - Fv could not read.\r
- EFI_NOT_FOUND - No matching file found.\r
- EFI_INVALID_PARAMETER - Invalid parameter\r
-\r
---*/\r
;\r
\r
\r
+\r
+/**\r
+ Locates a file in the firmware volume and\r
+ copies it to the supplied buffer.\r
+\r
+ @param This Indicates the calling context. \r
+ @param NameGuid Pointer to an EFI_GUID, which is the \r
+ filename. \r
+ @param Buffer Buffer is a pointer to pointer to a buffer \r
+ in which the file or section contents or are \r
+ returned. \r
+ @param BufferSize BufferSize is a pointer to caller allocated \r
+ UINTN. On input *BufferSize indicates the \r
+ size in bytes of the memory region pointed \r
+ to by Buffer. On output, *BufferSize \r
+ contains the number of bytes required to \r
+ read the file. \r
+ @param FoundType FoundType is a pointer to a caller allocated \r
+ EFI_FV_FILETYPE that on successful return \r
+ from Read() contains the type of file read. \r
+ This output reflects the file type \r
+ irrespective of the value of the SectionType \r
+ input. \r
+ @param FileAttributes FileAttributes is a pointer to a caller \r
+ allocated EFI_FV_FILE_ATTRIBUTES. On \r
+ successful return from Read(), \r
+ *FileAttributes contains the attributes of \r
+ the file read. \r
+ @param AuthenticationStatus AuthenticationStatus is a pointer to a \r
+ caller allocated UINTN in which the \r
+ authentication status is returned. \r
+\r
+ @retval EFI_SUCCESS Successfully read to memory buffer. \r
+ @retval EFI_WARN_BUFFER_TOO_SMALL Buffer too small. \r
+ @retval EFI_NOT_FOUND Not found. \r
+ @retval EFI_DEVICE_ERROR Device error. \r
+ @retval EFI_ACCESS_DENIED Could not read. \r
+ @retval EFI_INVALID_PARAMETER Invalid parameter. \r
+ @retval EFI_OUT_OF_RESOURCES Not enough buffer to be allocated.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvReadFile (\r
OUT EFI_FV_FILE_ATTRIBUTES *FileAttributes,\r
OUT UINT32 *AuthenticationStatus\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Locates a file in the firmware volume and\r
- copies it to the supplied buffer.\r
-\r
-Arguments:\r
- This - Indicates the calling context.\r
- NameGuid - Pointer to an EFI_GUID, which is the filename.\r
- Buffer - Buffer is a pointer to pointer to a buffer in\r
- which the file or section contents or are returned.\r
- BufferSize - BufferSize is a pointer to caller allocated\r
- UINTN. On input *BufferSize indicates the size\r
- in bytes of the memory region pointed to by\r
- Buffer. On output, *BufferSize contains the number\r
- of bytes required to read the file.\r
- FoundType - FoundType is a pointer to a caller allocated\r
- EFI_FV_FILETYPE that on successful return from Read()\r
- contains the type of file read. This output reflects\r
- the file type irrespective of the value of the\r
- SectionType input.\r
- FileAttributes - FileAttributes is a pointer to a caller allocated\r
- EFI_FV_FILE_ATTRIBUTES. On successful return from\r
- Read(), *FileAttributes contains the attributes of\r
- the file read.\r
- AuthenticationStatus - AuthenticationStatus is a pointer to a caller\r
- allocated UINTN in which the authentication status\r
- is returned.\r
-Returns:\r
- EFI_SUCCESS - Successfully read to memory buffer.\r
- EFI_WARN_BUFFER_TOO_SMALL - Buffer too small.\r
- EFI_NOT_FOUND - Not found.\r
- EFI_DEVICE_ERROR - Device error.\r
- EFI_ACCESS_DENIED - Could not read.\r
- EFI_INVALID_PARAMETER - Invalid parameter.\r
- EFI_OUT_OF_RESOURCES - Not enough buffer to be allocated.\r
-\r
---*/\r
;\r
\r
+\r
+/**\r
+ Locates a section in a given FFS File and\r
+ copies it to the supplied buffer (not including section header).\r
+\r
+ @param This Indicates the calling context. \r
+ @param NameGuid Pointer to an EFI_GUID, which is the \r
+ filename. \r
+ @param SectionType Indicates the section type to return. \r
+ @param SectionInstance Indicates which instance of sections with a \r
+ type of SectionType to return. \r
+ @param Buffer Buffer is a pointer to pointer to a buffer \r
+ in which the file or section contents or are \r
+ returned. \r
+ @param BufferSize BufferSize is a pointer to caller allocated \r
+ UINTN.\r
+ @param AuthenticationStatus AuthenticationStatus is a pointer to a \r
+ caller allocated UINT32 in which the \r
+ authentication status is returned. \r
+\r
+ @retval EFI_SUCCESS Successfully read the file section into \r
+ buffer. \r
+ @retval EFI_WARN_BUFFER_TOO_SMALL Buffer too small. \r
+ @retval EFI_NOT_FOUND Section not found. \r
+ @retval EFI_DEVICE_ERROR Device error. \r
+ @retval EFI_ACCESS_DENIED Could not read. \r
+ @retval EFI_INVALID_PARAMETER Invalid parameter.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvReadFileSection (\r
IN OUT UINTN *BufferSize,\r
OUT UINT32 *AuthenticationStatus\r
)\r
-/*++\r
-\r
- Routine Description:\r
- Locates a section in a given FFS File and\r
- copies it to the supplied buffer (not including section header).\r
-\r
- Arguments:\r
- This - Indicates the calling context.\r
- NameGuid - Pointer to an EFI_GUID, which is the filename.\r
- SectionType - Indicates the section type to return.\r
- SectionInstance - Indicates which instance of sections with a type of\r
- SectionType to return.\r
- Buffer - Buffer is a pointer to pointer to a buffer in which\r
- the file or section contents or are returned.\r
- BufferSize - BufferSize is a pointer to caller allocated UINTN.\r
- AuthenticationStatus -AuthenticationStatus is a pointer to a caller\r
- allocated UINT32 in which the authentication status\r
- is returned.\r
-\r
- Returns:\r
- EFI_SUCCESS - Successfully read the file section into buffer.\r
- EFI_WARN_BUFFER_TOO_SMALL - Buffer too small.\r
- EFI_NOT_FOUND - Section not found.\r
- EFI_DEVICE_ERROR - Device error.\r
- EFI_ACCESS_DENIED - Could not read.\r
- EFI_INVALID_PARAMETER - Invalid parameter.\r
-\r
---*/\r
;\r
\r
+\r
+/**\r
+ Writes one or more files to the firmware volume.\r
+\r
+ @param This Indicates the calling context. \r
+ @param NumberOfFiles Number of files. \r
+ @param WritePolicy WritePolicy indicates the level of reliability \r
+ for the write in the event of a power failure or \r
+ other system failure during the write operation. \r
+ @param FileData FileData is an pointer to an array of \r
+ EFI_FV_WRITE_DATA. Each element of array\r
+ FileData represents a file to be written. \r
+\r
+ @retval EFI_SUCCESS Files successfully written to firmware volume \r
+ @retval EFI_OUT_OF_RESOURCES Not enough buffer to be allocated. \r
+ @retval EFI_DEVICE_ERROR Device error. \r
+ @retval EFI_WRITE_PROTECTED Write protected. \r
+ @retval EFI_NOT_FOUND Not found. \r
+ @retval EFI_INVALID_PARAMETER Invalid parameter. \r
+ @retval EFI_UNSUPPORTED This function not supported.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvWriteFile (\r
IN EFI_FV_WRITE_POLICY WritePolicy,\r
IN EFI_FV_WRITE_FILE_DATA *FileData\r
)\r
-/*++\r
-\r
- Routine Description:\r
- Writes one or more files to the firmware volume.\r
-\r
- Arguments:\r
- This - Indicates the calling context.\r
- WritePolicy - WritePolicy indicates the level of reliability for\r
- the write in the event of a power failure or other\r
- system failure during the write operation.\r
- FileData - FileData is an pointer to an array of EFI_FV_WRITE_DATA.\r
- Each element of FileData[] represents a file to be written.\r
-\r
- Returns:\r
- EFI_SUCCESS - Files successfully written to firmware volume\r
- EFI_OUT_OF_RESOURCES - Not enough buffer to be allocated.\r
- EFI_DEVICE_ERROR - Device error.\r
- EFI_WRITE_PROTECTED - Write protected.\r
- EFI_NOT_FOUND - Not found.\r
- EFI_INVALID_PARAMETER - Invalid parameter.\r
- EFI_UNSUPPORTED - This function not supported.\r
-\r
---*/\r
;\r
\r
+\r
+/**\r
+ Return information of type InformationType for the requested firmware\r
+ volume.\r
+\r
+ @param This Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL. \r
+ @param InformationType InformationType for requested. \r
+ @param BufferSize On input, size of Buffer.On output, the amount of data \r
+ returned in Buffer. \r
+ @param Buffer A poniter to the data buffer to return. \r
+\r
+ @retval EFI_SUCCESS Successfully got volume Information.\r
+\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvGetVolumeInfo (\r
IN OUT UINTN *BufferSize,\r
OUT VOID *Buffer\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Return information of type InformationType for the requested firmware\r
+\r
+\r
+/**\r
+ Set information of type InformationType for the requested firmware\r
volume.\r
- \r
-Arguments:\r
- This - Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL.\r
- InformationType - InformationType for requested.\r
- BufferSize - On input, size of Buffer.On output, the amount of\r
- data returned in Buffer.\r
- Buffer - A poniter to the data buffer to return.\r
-Returns:\r
- EFI_SUCCESS - Successfully got volume Information.\r
-\r
---*/\r
-;\r
\r
+ @param This Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL. \r
+ @param InformationType InformationType for requested. \r
+ @param BufferSize On input, size of Buffer.On output, the amount of data \r
+ returned in Buffer. \r
+ @param Buffer A poniter to the data buffer to return. \r
+\r
+ @retval EFI_SUCCESS Successfully set volume Information.\r
\r
+**/\r
EFI_STATUS\r
EFIAPI\r
FvSetVolumeInfo (\r
IN UINTN BufferSize,\r
IN CONST VOID *Buffer\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Set information of type InformationType for the requested firmware\r
- volume.\r
-\r
-Arguments:\r
- This - Pointer to EFI_FIRMWARE_VOLUME2_PROTOCOL.\r
- InformationType - InformationType for requested.\r
- BufferSize - On input, size of Buffer.On output, the amount of\r
- data returned in Buffer.\r
- Buffer - A poniter to the data buffer to return.\r
-Returns:\r
- EFI_SUCCESS - Successfully set volume Information.\r
-\r
---*/\r
;\r
\r
//\r
} EFI_CHECKSUM_TYPE;\r
\r
\r
+\r
+/**\r
+ Check if a block of buffer is erased.\r
+\r
+ @param ErasePolarity Erase polarity attribute of the firmware volume \r
+ @param InBuffer The buffer to be checked \r
+ @param BufferSize Size of the buffer in bytes \r
+\r
+ @retval TRUE The block of buffer is erased \r
+ @retval FALSE The block of buffer is not erased\r
+\r
+**/\r
BOOLEAN\r
IsBufferErased (\r
IN UINT8 ErasePolarity,\r
IN VOID *Buffer,\r
IN UINTN BufferSize\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Check if a block of buffer is erased\r
\r
-Arguments:\r
- ErasePolarity - Erase polarity attribute of the firmware volume\r
- Buffer - The buffer to be checked\r
- BufferSize - Size of the buffer in bytes\r
- \r
-Returns:\r
- TRUE - The block of buffer is erased\r
- FALSE - The block of buffer is not erased\r
- \r
---*/\r
-;\r
+/**\r
+ Get the FFS file state by checking the highest bit set in the header's state field.\r
\r
+ @param ErasePolarity Erase polarity attribute of the firmware volume \r
+ @param FfsHeader Points to the FFS file header \r
+\r
+ @return FFS File state\r
+\r
+**/\r
EFI_FFS_FILE_STATE \r
GetFileState (\r
IN UINT8 ErasePolarity,\r
IN EFI_FFS_FILE_HEADER *FfsHeader\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Get the FFS file state by checking the highest bit set in the header's state field\r
\r
-Arguments:\r
- ErasePolarity - Erase polarity attribute of the firmware volume\r
- FfsHeader - Points to the FFS file header\r
- \r
-Returns:\r
- FFS File state \r
- \r
---*/\r
-;\r
+/**\r
+ Set the FFS file state.\r
+\r
+ @param State The state to be set. \r
+ @param FfsHeader Points to the FFS file header \r
+\r
+ @return None.\r
\r
+**/\r
VOID\r
SetFileState (\r
IN UINT8 State,\r
IN EFI_FFS_FILE_HEADER *FfsHeader\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Set the FFS file state.\r
\r
-Arguments:\r
- State - The state to be set.\r
- FfsHeader - Points to the FFS file header\r
- \r
-Returns:\r
- None.\r
- \r
---*/\r
-;\r
+/**\r
+ Verify checksum of the firmware volume header.\r
+\r
+ @param FvHeader Points to the firmware volume header to be checked \r
\r
+ @retval TRUE Checksum verification passed \r
+ @retval FALSE Checksum verification failed\r
+\r
+**/\r
BOOLEAN\r
VerifyFvHeaderChecksum (\r
IN EFI_FIRMWARE_VOLUME_HEADER *FvHeader\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Verify checksum of the firmware volume header \r
-\r
-Arguments:\r
- FvHeader - Points to the firmware volume header to be checked\r
- \r
-Returns:\r
- TRUE - Checksum verification passed\r
- FALSE - Checksum verification failed\r
- \r
---*/\r
;\r
\r
+\r
+/**\r
+ Check if it's a valid FFS file header.\r
+\r
+ @param ErasePolarity Erase polarity attribute of the firmware volume \r
+ @param FfsHeader Points to the FFS file header to be checked \r
+ @param FileState FFS file state to be returned \r
+\r
+ @retval TRUE Valid FFS file header \r
+ @retval FALSE Invalid FFS file header\r
+\r
+**/\r
BOOLEAN\r
IsValidFfsHeader (\r
IN UINT8 ErasePolarity,\r
IN EFI_FFS_FILE_HEADER *FfsHeader,\r
OUT EFI_FFS_FILE_STATE *FileState\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Check if it's a valid FFS file header\r
\r
-Arguments:\r
- ErasePolarity - Erase polarity attribute of the firmware volume\r
- FfsHeader - Points to the FFS file header to be checked\r
- FileState - FFS file state to be returned\r
- \r
-Returns:\r
- TRUE - Valid FFS file header\r
- FALSE - Invalid FFS file header\r
- \r
---*/\r
-;\r
+/**\r
+ Check if it's a valid FFS file.\r
+ Here we are sure that it has a valid FFS file header since we must call IsValidFfsHeader() first.\r
+\r
+ @param ErasePolarity Erase polarity attribute of the firmware volume \r
+ @param FfsHeader Points to the FFS file to be checked \r
\r
+ @retval TRUE Valid FFS file \r
+ @retval FALSE Invalid FFS file\r
+\r
+**/\r
BOOLEAN\r
IsValidFfsFile (\r
IN UINT8 ErasePolarity,\r
IN EFI_FFS_FILE_HEADER *FfsHeader\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- Check if it's a valid FFS file. \r
- Here we are sure that it has a valid FFS file header since we must call IsValidFfsHeader() first.\r
\r
-Arguments:\r
- ErasePolarity - Erase polarity attribute of the firmware volume\r
- FfsHeader - Points to the FFS file to be checked\r
- \r
-Returns:\r
- TRUE - Valid FFS file\r
- FALSE - Invalid FFS file\r
- \r
---*/\r
-;\r
+/**\r
+ given the supplied FW_VOL_BLOCK_PROTOCOL, allocate a buffer for output and\r
+ copy the volume header into it.\r
+\r
+ @param Fvb The FW_VOL_BLOCK_PROTOCOL instance from which to \r
+ read the volume header \r
+ @param FwVolHeader Pointer to pointer to allocated buffer in which \r
+ the volume header is returned. \r
\r
+ @retval EFI_OUT_OF_RESOURCES No enough buffer could be allocated. \r
+ @retval EFI_SUCCESS Successfully read volume header to the allocated \r
+ buffer.\r
+\r
+**/\r
EFI_STATUS\r
GetFwVolHeader (\r
IN EFI_FIRMWARE_VOLUME_BLOCK_PROTOCOL *Fvb,\r
OUT EFI_FIRMWARE_VOLUME_HEADER **FwVolHeader\r
)\r
-/*++\r
+;\r
\r
-Routine Description:\r
- given the supplied FW_VOL_BLOCK_PROTOCOL, allocate a buffer for output and\r
- copy the volume header into it.\r
\r
-Arguments:\r
- Fvb - The FW_VOL_BLOCK_PROTOCOL instance from which to read the volume\r
- header\r
- FwVolHeader - Pointer to pointer to allocated buffer in which the volume\r
- header is returned.\r
\r
-Returns:\r
- Status code.\r
+/**\r
+ Check if a FV is consistent and allocate cache\r
\r
---*/\r
-;\r
+ @param FvDevice pointer to the FvDevice to be checked. \r
\r
+ @retval EFI_OUT_OF_RESOURCES No enough buffer could be allocated. \r
+ @retval EFI_SUCCESS FV is consistent and cache is allocated. \r
+ @retval EFI_VOLUME_CORRUPTED File system is corrupted.\r
\r
+**/\r
EFI_STATUS\r
FvCheck (\r
IN OUT FV_DEVICE *FvDevice\r
)\r
-/*++\r
-\r
-Routine Description:\r
- Check if a FV is consistent and allocate cache\r
-\r
-Arguments:\r
- FvDevice - pointer to the FvDevice to be checked.\r
-\r
-Returns:\r
- EFI_OUT_OF_RESOURCES - Not enough buffer to be allocated.\r
- EFI_SUCCESS - FV is consistent and cache is allocated.\r
- EFI_VOLUME_CORRUPTED - File system is corrupted.\r
-\r
---*/\r
;\r
\r
#endif\r
projects / mirror_edk2.git / blobdiff