\r
## Include/Guid/StatusCodeDataTypeVariable.h\r
gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
+ \r
+ ## Include/Guid/MemoryProfile.h\r
+ gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
\r
[Ppis]\r
## Include/Ppi/AtaController.h\r
# @Prompt Default Creator Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
\r
+ ## The mask is used to control memory profile behavior.<BR><BR>\r
+ # BIT0 - Enable UEFI memory profile.<BR>\r
+ # BIT1 - Enable SMRAM profile.<BR>\r
+ # @Prompt Memory Profile Property.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
+\r
+ ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
+ # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
+ #\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0001<BR>\r
+ # EfiLoaderCode 0x0002<BR>\r
+ # EfiLoaderData 0x0004<BR>\r
+ # EfiBootServicesCode 0x0008<BR>\r
+ # EfiBootServicesData 0x0010<BR>\r
+ # EfiRuntimeServicesCode 0x0020<BR>\r
+ # EfiRuntimeServicesData 0x0040<BR>\r
+ # EfiConventionalMemory 0x0080<BR>\r
+ # EfiUnusableMemory 0x0100<BR>\r
+ # EfiACPIReclaimMemory 0x0200<BR>\r
+ # EfiACPIMemoryNVS 0x0400<BR>\r
+ # EfiMemoryMappedIO 0x0800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
+ # EfiPalCode 0x2000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ #\r
+ # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
+ #\r
+ # @Prompt Memory profile memory type.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
+\r
## UART clock frequency is for the baud rate configuration.\r
# @Prompt Serial Port Clock Rate.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
\r
## Base address of the FTW working block range in flash device.\r
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
# @Prompt Base address of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
\r
## Size of the FTW working block range.\r
+ # If the value is less than one block size, the work space range should not span blocks.\r
+ # If the value is larger than one block size, it should be block size aligned.\r
# @Prompt Size of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
\r
## 64-bit Base address of the FTW working block range in flash device.\r
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
# @Prompt 64-bit Base address of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
\r