## Include/Ppi/SerialPortPei.h\r
gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
\r
+ ## Include/Ppi/UfsHostController.h\r
+ gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
## Include/Protocol/FormBrowserEx2.h\r
gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
\r
+ ## Include/Protocol/UfsHostController.h\r
+ gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# EfiMemoryMappedIO 0x0800<BR>\r
# EfiMemoryMappedIOPortSpace 0x1000<BR>\r
# EfiPalCode 0x2000<BR>\r
+ # EfiPersistentMemory 0x4000<BR>\r
# OS Reserved 0x8000000000000000<BR>\r
#\r
# e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
# @Prompt Video vertical resolution.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
\r
+ # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
+ # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
+ # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
+ # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
+ # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
+ # for text setup.\r
+\r
+ ## Specify the video horizontal resolution of text setup.\r
+ # @Prompt Video Horizontal Resolution of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
+\r
+ ## Specify the video vertical resolution of text setup.\r
+ # @Prompt Video Vertical Resolution of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
+\r
+ ## Specify the console output column of text setup.\r
+ # @Prompt Console Output Column of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
+\r
+ ## Specify the console output row of text setup.\r
+ # @Prompt Console Output Row of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
+\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## Base address of the NV variable range in flash device.\r
# @Prompt Base address of flash NV variable range.\r
# @Prompt Disk I/O - Number of Data Buffer block.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
\r
+ ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
+ # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
+ # host controllers, their mmio base addresses are calculated one by one from this base address.\r
+ # @Prompt Mmio base address of pci-based UFS host controller.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r