# Include/Guid/SystemNvDataGuid.h\r
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
\r
+ ## GUID used as the signature of FTW working block header.\r
+ # Include/Guid/SystemNvDataGuid.h\r
+ gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
+\r
+ ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
+ # Include/Guid/FaultTolerantWrite.h\r
+ gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
+\r
## Guid specify the device is the console out device.\r
# Include/Guid/ConsoleOutDevice.h\r
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
## Guid for Firmware Performance Data Table (FPDT) implementation.\r
# Include/Guid/FirmwarePerformance.h\r
gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
+ gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
\r
## Include/Guid/ExitBootServiceFailed.h\r
gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
# Include/Protocol/SmmVariableProtocol.h\r
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
\r
+ ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
+ # Include/Protocol/VariableLock.h\r
+ gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
+\r
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
# Include/Protocol/SmmFirmwareVolumeBlock.h\r
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
\r
- ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
# The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
# be reflushed through the manner of fault tolerant write.\r
## FFS filename to find the capsule coalesce image.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
\r
- ## Single root I/O virtualization virtual function memory BAR alignment\r
- # BITN set indicates 2 of n+12 power\r
- # BIT0 set indicates 4KB alignment\r
- # BIT1 set indicates 8KB alignment\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
- \r
## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
# -1: Enable the feature as fixed offset to TOLM\r
# 0: Disable the feature.\r
# Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
- \r
+\r
## Smbios version\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
\r
## Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
\r
- ## Base address of the FTW spare block range in flash device.\r
+ ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
\r
## Base address of the FTW working block range in flash device.\r
## 64-bit Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
\r
- ## 64-bit Base address of the FTW spare block range in flash device.\r
+ ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
\r
## 64-bit Base address of the FTW working block range in flash device.\r
## This PCD specifies whether the Single Root I/O virtualization support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
\r
+ ## Single root I/O virtualization virtual function memory BAR alignment\r
+ # BITN set indicates 2 of n+12 power\r
+ # BIT0 set indicates 4KB alignment\r
+ # BIT1 set indicates 8KB alignment\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
+\r
## This PCD specifies whether the Alternative Routing-ID support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
\r