-## @file MdeModulePkg.dec\r
+## @file MdeModulePkg.dec\r
#\r
-# This package provides the modules that conform to EFI/PI Industry standards.\r
-# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r
+# This package provides the modules that conform to UEFI/PI Industry standards.\r
+# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2009, Intel Corporation.\r
-#\r
-# All rights reserved.\r
-# This program and the accompanying materials are licensed and made available under\r
-# the terms and conditions of the BSD License which accompanies this distribution.\r
+# Copyright (c) 2007 - 2011, Intel Corporation. All rights reserved.<BR>\r
+# This program and the accompanying materials are licensed and made available under \r
+# the terms and conditions of the BSD License that accompanies this distribution. \r
# The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
-#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+# http://opensource.org/licenses/bsd-license.php. \r
+# \r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
#\r
##\r
\r
DEC_SPECIFICATION = 0x00010005\r
PACKAGE_NAME = MdeModulePkg\r
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
- PACKAGE_VERSION = 0.1\r
+ PACKAGE_VERSION = 0.91\r
\r
-[Includes.common]\r
+[Includes]\r
Include\r
\r
\r
-[LibraryClasses.common]\r
+[LibraryClasses]\r
## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
# This library is only intended to be used by UEFI network stack modules.\r
IpIoLib|Include/Library/IpIoLib.h\r
- \r
+\r
## @libraryclass Basic function for UEFI network stack.\r
# This library is only intended to be used by UEFI network stack modules.\r
NetLib|Include/Library/NetLib.h\r
- \r
+\r
## @libraryclass The helper routines to access UDP service.\r
# This library is only intended to be used by UEFI network stack modules.\r
UdpIoLib|Include/Library/UdpIoLib.h\r
- \r
+\r
+ ## @libraryclass The helper routines to access TCP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ TcpIoLib|Include/Library/TcpIoLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
## @libraryclass Defines a set of methods related do S3 mode.\r
+ # This library class is no longer used and modules using this library should\r
+ # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.\r
S3Lib|Include/Library/S3Lib.h\r
- \r
+\r
## @libraryclass Defines a set of methods related recovery mode.\r
+ # This library class is no longer used and modules using this library should\r
+ # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.\r
RecoveryLib|Include/Library/RecoveryLib.h\r
- \r
- ## @libraryclass Basic platform driver override functions.\r
- # This library is only intended to be used by Platform Driver Override Dxe Driver and Application.\r
- PlatformDriverOverrideLib|Include/Library/PlatformDriverOverrideLib.h\r
\r
## @libraryclass Provides HII related functions.\r
HiiLib|Include/Library/HiiLib.h\r
\r
- ## @libraryclass Provides a set of interfaces to do IFR opcode creation and interact with a UEFI Form Browser.\r
- IfrSupportLib|Include/Library/IfrSupportLib.h\r
- \r
- ## @libraryclass Includes two extended HII functions to create and destory Hii Package \r
- # by create the virtual Driver Handle.\r
- ##\r
- ExtendedHiiLib|Include/Library/ExtendedHiiLib.h\r
- \r
- ## @libraryclass Defines APIs that is related to IFR operations but specific to EDK II\r
- # implementation.\r
- ##\r
- ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h\r
- \r
## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
CapsuleLib|Include/Library/CapsuleLib.h\r
- \r
+\r
## @libraryclass Library for Deferred Procedure Calls.\r
DpcLib|Include/Library/DpcLib.h\r
\r
- ## @libraryclass Provides APIs for system memory test.\r
- ##\r
- BaseMemoryTestLib|Include/Library/BaseMemoryTestLib.h\r
+ ## @libraryclass Provides global variables that are pointers\r
+ # to the UEFI HII related protocols.\r
+ #\r
+ UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
+\r
+ ## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
+ #\r
+ SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
+\r
+ ## @libraryclass OEM status code libary is used to report status code to OEM device.\r
+ #\r
+ OemHookStatusCodeLib|Include/Library/OemHookStatusCodeLib.h\r
\r
-[Guids.common]\r
+ ## @libraryclass Debug Agent is used to provide soft debug capability.\r
+ #\r
+ DebugAgentLib|Include/Library/DebugAgentLib.h\r
+\r
+ ## @libraryclass Provide platform specific hooks.\r
+ #\r
+ PlatformHookLib|Include/Library/PlatformHookLib.h\r
+ \r
+[Guids]\r
## MdeModule package token space guid\r
- ## Include/Guid/MdeModulePkgTokenSpace.h\r
+ # Include/Guid/MdeModulePkgTokenSpace.h\r
gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
\r
## Hob guid for Pcd DataBase\r
- ## Include/Guid/PcdDataBaseHobGuid.h\r
+ # Include/Guid/PcdDataBaseHobGuid.h\r
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
- \r
+\r
## Guid for EDKII implementation GUIDed opcodes\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
- \r
+\r
## Guid for Framework vfr GUIDed opcodes.\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
- \r
+\r
## Guid to specify the System Non Volatile FV\r
- ## Include/Guid/SystemNvDataGuid.h\r
+ # Include/Guid/SystemNvDataGuid.h\r
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
- \r
+\r
## Guid specify the device is the console out device.\r
- ## Include/Guid/ConsoleOutDevice.h\r
+ # Include/Guid/ConsoleOutDevice.h\r
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
\r
## Guid specify the device is the console in device.\r
- ## Include/Guid/ConsoleInDevice.h\r
+ # Include/Guid/ConsoleInDevice.h\r
gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- \r
+\r
## Hob and Variable guid specify the platform memory type information.\r
- ## Include/Guid/MemoryTypeInformation.h\r
+ # Include/Guid/MemoryTypeInformation.h\r
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
- \r
+\r
## Capsule update hob and variable guid\r
- ## Include/Guid/CapsuleVendor.h\r
+ # Include/Guid/CapsuleVendor.h\r
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
- \r
+\r
## Guid specifiy the device is the StdErr device.\r
- ## Include/Guid/StandardErrorDevice.h\r
+ # Include/Guid/StandardErrorDevice.h\r
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- \r
+\r
## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
- ## Include/Guid/VariableFormat.h\r
+ # Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
- \r
- ## Platform Override Variable guid\r
- ## Include/Guid/OverrideVariable.h\r
- gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}\r
+\r
+ ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
+ # Include/Guid/SmmVariableCommon.h\r
+ gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
\r
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
- ## Include/Guid/Performance.h\r
+ # Include/Guid/Performance.h\r
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
+ gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
\r
## Guid is defined for CRC32 encapsulation scheme.\r
- ## Include/Guid/Crc32GuidedSectionExtraction.h\r
+ # Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
-[Protocols.common] \r
+ ## Include/Guid/NicIp4ConfigNvData.h\r
+ gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
+\r
+ ## Include/Guid/StatusCodeCallbackGuid.h\r
+ gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
+\r
+ ## GUID identifies status code records HOB that originate from the PEI status code\r
+ # Include/Guid/MemoryStatusCodeRecord.h\r
+ gMemoryStatusCodeRecordGuid = { 0x060CC026, 0x4C0D, 0x4DDA, { 0x8F, 0x41, 0x59, 0x5F, 0xEF, 0x00, 0xA5, 0x02 }}\r
+\r
+ ## GUID used to pass DEBUG() macro information through the Status Code Protocol and Status Code PPI\r
+ # Include/Guid/StatusCodeDataTypeDebug.h\r
+ gEfiStatusCodeDataTypeDebugGuid = { 0x9A4E9246, 0xD553, 0x11D5, { 0x87, 0xE2, 0x00, 0x06, 0x29, 0x45, 0xC3, 0xB9 }}\r
+\r
+ ## A configuration Table Guid for Load module at fixed address \r
+ # Include/Guid/LoadModuleAtFixedAddress.h\r
+ gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
+\r
+ ## GUID used to store the global debug mask value into an EFI Variable\r
+ # Include/Guid/DebugMask.h \r
+ gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
+ \r
+[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
- ## Include/Protocol/LoadPe32Image.h\r
+ # Include/Protocol/LoadPe32Image.h\r
+ # This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
+ # If developer need implement such functionality, they should use BasePeCoffLib.\r
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
- \r
- ## Print protocol defines six basic print functions to print the format unicode and ascii string.\r
- ## Include/Protocol/Print2.h\r
- gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
+\r
+ ## Print protocol defines basic print functions to print the format unicode and ascii string.\r
+ # Include/Protocol/Print2.h\r
+ gEfiPrint2ProtocolGuid = { 0xf05976ef, 0x83f1, 0x4f3d, { 0x86, 0x19, 0xf7, 0x59, 0x5d, 0x41, 0xe5, 0x38 } }\r
\r
## This protocol defines the generic memory test interfaces in Dxe phase.\r
- ## Include/Protocol/GenericMemoryTest.h\r
+ # Include/Protocol/GenericMemoryTest.h\r
gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
- \r
- ## This protocol provides the interfaces to Get/Set the current video mode for GOP/UGA screen\r
- ## Include/Protocol/ConsoleControl.h\r
- gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}\r
- \r
- ## Include/Protocol/NicIp4Config.h\r
- gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}\r
- \r
- ## Include/Protocol/NicIp4Config.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
- \r
- ## Include/Protocol/Tcp.h\r
- gEfiTcpProtocolGuid = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}\r
- \r
- ## Include/Protocol/PxeDhcp4CallBack.h\r
- gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}\r
- \r
- ## Include/Protocol/PxeDhcp4.h\r
- gEfiPxeDhcp4ProtocolGuid = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}\r
- \r
+\r
## Include/Protocol/Dpc.h\r
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
- \r
+\r
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
# Include/Protocol/FaultTolerantWrite.h\r
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
+\r
+ ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
+ # Include/Protocol/SmmFaultTolerantWrite.h\r
+ gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
\r
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
# Include/Protocol/SwapAddressRange.h\r
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
\r
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
+ # Include/Protocol/SmmSwapAddressRange.h\r
+ gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
+ \r
+ ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
+ # Include/Protocol/SmmVariableProtocol.h\r
+ gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
+\r
+ ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
+ # Include/Protocol/SmmFirmwareVolumeBlock.h\r
+ gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
+\r
+ ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
+ # Include/Guid/DebugMask.h \r
+ gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
[PcdsFeatureFlag]\r
## Indicate whether platform can support update capsule across a system reset\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
- \r
+\r
## This feature flag can be used to enable or disable all PCD PEIM services.\r
# If TRUE, all PCD PPI services will be produced.\r
- ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
+ # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
\r
## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
# It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
- \r
+\r
## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
# It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
- \r
+\r
## If TRUE, enable the statistic functionality about variable usage. Such information is\r
# stored as a vendor configuration table into the EFI system table.\r
- # If user wants to get variable usage info, this pcd should be set as TRUE.\r
+ # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
+ # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
+ # not output useful info.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
- \r
+\r
## If TRUE, Unicode Collation Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
- \r
+\r
## If TRUE, Unicode Collation 2 Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
- \r
+\r
## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
# It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
- \r
+\r
## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
# It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
- \r
+\r
## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
# If TE section is not found, then PeiCore will search PE section.\r
# If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
# This PCD is used to tune Pei phase performance to reduce the search image time.\r
# It can be set according to the generated image section type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
- \r
+\r
## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
- # interrupt to access usb device in the case of absence of usb stack.\r
- ##\r
+ # interrupt to access usb device in the case of absence of usb stack. \r
+ # DUET platform requires the token to be TRUE.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
-\r
+ \r
## If TRUE, HiiImageProtocol will be installed.\r
# FALSE is for size reduction.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
- \r
- ## If TRUE, these interface in EFI_HII_CONFIG_ROUTING_PROTOCOL will be supported: ExtractConfig, ExportConfig, RouteConfig \r
- # and GetAltCfg will be supported. Otherwise, these interfaces will return EFI_UNSUPPORTED.\r
- # FALSE is for size reduction.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101\r
- \r
+\r
## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
# from HII database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
\r
- ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r
+ ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
# If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
- ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
+ # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
- \r
- ##\r
- # If TRUE, HelloWorld Application will print the verbose information.\r
+\r
+ ## If TRUE, HelloWorld Application will print the verbose information.\r
# This PCD is a sample to explain FeatureFlag PCD usage.\r
- ##\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
\r
- ##\r
- # If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
+ ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
# If FASLE, only FTW Write service is available.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200a\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
+\r
+ ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
+ # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
+\r
+ ## This PCD specifies whether PciBus supports the hot plug device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
+\r
+ ## This PCD specifies whether the PCI bus driver probes non-standard, \r
+ # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
+ ## This PCD specifies whether StatusCode is reported via Serial port.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
\r
-[PcdsFeatureFlag.IA32]\r
- ## \r
+ ## This PCD specifies whether StatusCode is stored in memory.\r
+ # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
+\r
+ ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
+\r
+ ## This PCD specified whether ACPI SDT protocol is installed.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
+\r
+ ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
+ # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
+ # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
+\r
+ ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
+ # If TRUE, TEXT statement will always be set to GrayOut.\r
+ # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
+ \r
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
+ ##\r
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
# If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
# otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
\r
## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
- # to store PCD value. \r
+ # to store PCD value.\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
- \r
+\r
## Maximum number of FV is supported by PeiCore's dispatching.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
\r
\r
## Maximum PPI count is supported by PeiCore's PPI database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
- \r
- ## Size of the NV variable range.\r
+\r
+ ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
- \r
- ## Maximum allowable size of a common type variable, that is, non-hardware error type variable.\r
+\r
+ ## The maximum size of single common variable, that is non-HwErr type varible.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
- \r
- ## Maximum allowable size of a single hardware error record variable.\r
+\r
+ ## The maximum size of single hardware error record variable.\r
+ # In IA32/X64 platforms, this value should be larger than 1KB.\r
+ # In IA64 platforms, this value should be larger than 128KB.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
- \r
- ## Size of allocated memory for volatile variable store. Variables are stored in such region and \r
- # total length of all variables should not larger than this value.\r
- ##\r
+\r
+ ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
+ # In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
+ # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
+ # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
+\r
+ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
- \r
- ## Size of the FTW spare block range.\r
+\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
- \r
+\r
## Size of the FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
- \r
+\r
+ ## FFS filename to find the ACPI tables\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
+\r
+ ## Single root I/O virtualization virtual function memory BAR alignment\r
+ # BITN set indicates 2 of n+12 power\r
+ # BIT0 set indicates 4KB alignment\r
+ # BIT1 set indicates 8KB alignment\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
+ \r
+ ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
+ # -1: Enable the feature as fixed offset to TOLM\r
+ # 0: Disable the feature.\r
+ # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
+ \r
+ ## Smbios version\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055\r
+\r
+ ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
+ # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
+\r
[PcdsFixedAtBuild,PcdsPatchableInModule]\r
## Maximun number of performance log entries during PEI phase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
## RTC Update Timeout Value\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
+\r
+ ## If TRUE, then 16550 serial port registers are in MMIO space. \r
+ # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
\r
-[PcdsPatchableInModule,PcdsDynamic]\r
- ##\r
- # This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
- ##\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
+ ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
+ # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
+\r
+ ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
+ # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
+ \r
+ ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
+\r
+ ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
+\r
+ ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
+ # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
+ # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
+ # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
+ # BIT7..BIT6 - Reserved. Must be 0.\r
+ #\r
+ # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
+\r
+ ## FIFO Control Register (FCR) for the 16550 serial port. \r
+ # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
+ # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
+ # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
+ # BIT4..BIT3 - Reserved. Must be 0.\r
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
+ # BIT7..BIT6 - Reserved. Must be 0.\r
+ #\r
+ # Default is to enable and clear all FIFOs.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
+\r
+ ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
+ # structure. The default value for this PCD is 0, which means that the DXE Core\r
+ # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
+ # boundary as close to the top of memory as feasible. If this PCD is set to a \r
+ # value other than 0, then the DXE Core will first attempt to allocate the \r
+ # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
+ # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
+ # boundary as close to the top of memory as feasible.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
\r
- ##\r
- # This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
- ##\r
+[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
+\r
+ ## This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
- \r
-[PcdsFixedAtBuild,PcdsDynamic]\r
- ## Base address of the NV variable range in flash device \r
+\r
+[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
+ ## Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
- \r
+\r
## Base address of the FTW spare block range in flash device.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r
- \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
+\r
## Base address of the FTW working block range in flash device.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r
- \r
- ##\r
- # This PCD defines the print string.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
+\r
+ ## 64-bit Base address of the NV variable range in flash device\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
+\r
+ ## 64-bit Base address of the FTW spare block range in flash device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
+\r
+ ## 64-bit Base address of the FTW working block range in flash device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
+\r
+ ## This PCD defines the print string.\r
# This PCD is a sample to explain String typed PCD usage.\r
- ##\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r
- \r
-[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
- ##\r
- # This PCD defines the times to print hello world string.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
+\r
+ ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
+ # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
+\r
+ ## This PCD specifies whether the Single Root I/O virtualization support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
+\r
+ ## This PCD specifies whether the Alternative Routing-ID support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
+\r
+ ## This PCD specifies whether the Multi Root I/O virtualization support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
+\r
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## This PCD defines the times to print hello world string.\r
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
- ##\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
- ## Indicate the max size of the populated capsule image that the platform can support.\r
- # The default max size is 100MB (0x6400000) for more than one large capsule images. \r
+ ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
+ # The default max size is 100MB (0x6400000) for more than one large capsule images.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
- \r
- ## Indicate the max size of the non-populated capsule image that the platform can support.\r
- # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
+\r
+ ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
+ # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
+\r
+ ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
+\r
+ ## Firmware revision that is default value filled into the EFI System Table\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
+\r
+ ## Null-terminated Unicode string that described the firmware version\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
+\r
+ ## Null-terminated Unicode string that contains the date the formware was released\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
+\r
+ ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
+ # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
+ # The default value in PeiPhase is 1 KBytes.\r
+ # The default value in DxePhase is 128 KBytes.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
+\r
+ ## This PCD specifies whether to reset system when memory type information changes.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
+\r
+ ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
+ \r
+ ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
+ \r
+ ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
+ \r
+ ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BACKGROUND_BLACK)\r
+ # 0x10 (EFI_BACKGROUND_BLUE)\r
+ # 0x20 (EFI_BACKGROUND_GREEN)\r
+ # 0x30 (EFI_BACKGROUND_CYAN)\r
+ # 0x40 (EFI_BACKGROUND_RED)\r
+ # 0x50 (EFI_BACKGROUND_MAGENTA)\r
+ # 0x60 (EFI_BACKGROUND_BROWN)\r
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
+\r
+[PcdsPatchableInModule]\r
+ ## Specify memory size with page number for PEI code when \r
+ # the feature of Loading Module at Fixed Address is enabled\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
+ \r
+ ## Specify memory size with page number for DXE boot time code when \r
+ # the feature of Loading Module at Fixed Address is enabled\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
+ \r
+ ## Specify memory size with page number for DXE runtime code when \r
+ # the feature of Loading Module at Fixed Address is enabled\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
+ \r
+ ## Specify memory size with page number for SMM code when \r
+ # the feature of Loading Module at Fixed Address is enabled\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
+\r
projects / mirror_edk2.git / blobdiff