-## @file MdeModulePkg.dec\r
+## @file MdeModulePkg.dec\r
#\r
# This package provides the modules that conform to UEFI/PI Industry standards.\r
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2010, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r
# This program and the accompanying materials are licensed and made available under \r
# the terms and conditions of the BSD License that accompanies this distribution. \r
# The full text of the license may be found at\r
DEC_SPECIFICATION = 0x00010005\r
PACKAGE_NAME = MdeModulePkg\r
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
- PACKAGE_VERSION = 0.91\r
+ PACKAGE_VERSION = 0.92\r
\r
[Includes]\r
Include\r
# This library is only intended to be used by UEFI network stack modules.\r
UdpIoLib|Include/Library/UdpIoLib.h\r
\r
+ ## @libraryclass The helper routines to access TCP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ TcpIoLib|Include/Library/TcpIoLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
\r
## @libraryclass Provides a set of interfaces to abstract the policy of security measurement.\r
#\r
- SecurityManagementLib|MdeModulePkg/Include/Library/SecurityManagementLib.h\r
+ SecurityManagementLib|Include/Library/SecurityManagementLib.h\r
\r
## @libraryclass OEM status code libary is used to report status code to OEM device.\r
#\r
## @libraryclass Debug Agent is used to provide soft debug capability.\r
#\r
DebugAgentLib|Include/Library/DebugAgentLib.h\r
+\r
+ ## @libraryclass Provide platform specific hooks.\r
+ #\r
+ PlatformHookLib|Include/Library/PlatformHookLib.h\r
+\r
+ ## @libraryclass Provide platform specific hooks for SMM core.\r
+ #\r
+ SmmCorePlatformHookLib|Include/Library/SmmCorePlatformHookLib.h\r
+\r
+ ## @libraryclass Provide capability to maintain the data integrity cross S3 phase.\r
+ #\r
+ LockBoxLib|Include/Library/LockBoxLib.h\r
+ \r
+ ## @libraryclass Provide the CPU exception handler.\r
+ #\r
+ CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
+ \r
+ ## @libraryclass Provides platform specific display interface.\r
+ #\r
+ CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/PcdDataBaseHobGuid.h\r
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
\r
+ ## Guid for PCD DataBase signature.\r
+ # Include/Guid/PcdDataBaseSignatureGuid.h\r
+ gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
+\r
## Guid for EDKII implementation GUIDed opcodes\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
# Include/Guid/SystemNvDataGuid.h\r
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
\r
+ ## GUID used as the signature of FTW working block header.\r
+ # Include/Guid/SystemNvDataGuid.h\r
+ gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
+\r
+ ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.\r
+ # Include/Guid/FaultTolerantWrite.h\r
+ gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}\r
+\r
## Guid specify the device is the console out device.\r
# Include/Guid/ConsoleOutDevice.h\r
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
# Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
+ # Include/Guid/VariableIndexTable.h\r
+ gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
+\r
+ ## Guid is defined for SMM variable module to notify SMM variable wrapper module when variable write service was ready.\r
+ # Include/Guid/SmmVariableCommon.h\r
+ gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}\r
+ \r
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
# Include/Guid/Performance.h\r
- gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
+ gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }\r
+ gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }\r
+ gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }\r
+ gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }\r
\r
## Guid is defined for CRC32 encapsulation scheme.\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
# Include/Guid/LoadModuleAtFixedAddress.h\r
gLoadFixedAddressConfigurationTableGuid = { 0x2CA88B53,0xD296,0x4080, { 0xA4,0xA5,0xCA,0xD9,0xBA,0xE2,0x4B,0x9 } }\r
\r
+ ## GUID used to store the global debug mask value into an EFI Variable\r
+ # Include/Guid/DebugMask.h \r
+ gEfiGenericVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, {0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43} }\r
+ \r
+ ## Event for the DXE Core to signal idle events\r
+ # Include/Guid/EventIdle.h\r
+ gIdleLoopEventGuid = { 0x3c8d294c, 0x5fc3, 0x4451, { 0xbb, 0x31, 0xc4, 0xc0, 0x32, 0x29, 0x5e, 0x6c } }\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatUsbDiskGuid = { 0x0FFBCE19, 0x324C, 0x4690, { 0xA0, 0x09, 0x98, 0xC6, 0xAE, 0x2E, 0xB1, 0x86 }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatIdeDiskGuid = { 0xB38573B6, 0x6200, 0x4AC5, { 0xB5, 0x1D, 0x82, 0xE6, 0x59, 0x38, 0xD7, 0x83 }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnFatFloppyDiskGuid = { 0x2E3D2E75, 0x9B2E, 0x412D, { 0xB4, 0xB1, 0x70, 0x41, 0x6B, 0x87, 0x00, 0xFF }}\r
+\r
+ ## Include/Guid/RecoveryDevice.h\r
+ gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}\r
+\r
+ ## Include/Guid/SmmLockBox.h\r
+ gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}\r
+\r
+ ## Include/Guid/AcpiS3Context.h\r
+ gEfiAcpiVariableGuid = { 0xAF9FFD67, 0xEC10, 0x488A, { 0x9D, 0xFC, 0x6C, 0xBF, 0x5E, 0xE2, 0x2C, 0x2E }}\r
+\r
+ ## Include/Guid/AcpiS3Context.h\r
+ gEfiAcpiS3ContextGuid = { 0xef98d3a, 0x3e33, 0x497a, { 0xa4, 0x1, 0x77, 0xbe, 0x3e, 0xb7, 0x4f, 0x38 }}\r
+\r
+ ## Include/Guid/BootScriptExecutorVariable.h\r
+ gEfiBootScriptExecutorVariableGuid = { 0x3079818c, 0x46d4, 0x4a73, { 0xae, 0xf3, 0xe3, 0xe4, 0x6c, 0xf1, 0xee, 0xdb }}\r
+ gEfiBootScriptExecutorContextGuid = { 0x79cb58c4, 0xac51, 0x442f, { 0xaf, 0xd7, 0x98, 0xe4, 0x7d, 0x2e, 0x99, 0x8 }}\r
+\r
+ ## Include/Guid/UsbKeyBoardLayout.h\r
+ gUsbKeyboardLayoutPackageGuid = { 0xc0f3b43, 0x44de, 0x4907, { 0xb4, 0x78, 0x22, 0x5f, 0x6f, 0x62, 0x89, 0xdc }}\r
+ gUsbKeyboardLayoutKeyGuid = { 0x3a4d7a7c, 0x18a, 0x4b42, { 0x81, 0xb3, 0xdc, 0x10, 0xe3, 0xb5, 0x91, 0xbd }}\r
+ \r
+ ## Include/Guid/HiiResourceSampleHii.h\r
+ gHiiResourceSamleFormSetGuid = { 0x4f4ef7f0, 0xaa29, 0x4ce9, { 0xba, 0x41, 0x64, 0x3e, 0x1, 0x23, 0xa9, 0x9f }}\r
+\r
+ ## Include/Guid/DriverSampleHii.h\r
+ gDriverSampleFormSetGuid = { 0xA04A27f4, 0xDF00, 0x4D42, { 0xB5, 0x52, 0x39, 0x51, 0x13, 0x02, 0x11, 0x3D }}\r
+ gDriverSampleInventoryGuid = { 0xb3f56470, 0x6141, 0x4621, { 0x8f, 0x19, 0x70, 0x4e, 0x57, 0x7a, 0xa9, 0xe8 }}\r
+ gEfiIfrRefreshIdOpGuid = { 0xF5E655D9, 0x02A6, 0x46f2, { 0x9E, 0x76, 0xB8, 0xBE, 0x8E, 0x60, 0xAB, 0x22 }}\r
+\r
+ ## Include/Guid/PlatDriOverrideHii.h\r
+ gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
+\r
+ ## Include/Guid/Ip4ConfigHii.h\r
+ gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+\r
+ ## Include/Guid/VlanConfigHii.h\r
+ gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
+\r
+ ## Include/Guid/Ip4IScsiConfigHii.h\r
+ gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}\r
+ gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}\r
+\r
+ ## Include/Guid/ZeroGuid.h\r
+ gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}\r
+ \r
+ ## Include/Guid/MtcVendor.h\r
+ gMtcVendorGuid = { 0xeb704011, 0x1402, 0x11d3, { 0x8e, 0x77, 0x0, 0xa0, 0xc9, 0x69, 0x72, 0x3b }}\r
+\r
+ ## Guid for Firmware Performance Data Table (FPDT) implementation.\r
+ # Include/Guid/FirmwarePerformance.h\r
+ gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}\r
+ gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}\r
+\r
+ ## Include/Guid/ExitBootServiceFailed.h\r
+ gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }\r
+\r
+ ## Include/Guid/ConnectConInEvent.h\r
+ gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
+\r
+[Ppis]\r
+ ## Include/Ppi/AtaController.h\r
+ gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
+\r
+ ## Include/Ppi/UsbHostController.h\r
+ gPeiUsbHostControllerPpiGuid = { 0x652B38A9, 0x77F4, 0x453F, { 0x89, 0xD5, 0xE7, 0xBD, 0xC3, 0x52, 0xFC, 0x53 }}\r
+\r
+ ## Include/Ppi/Usb2HostController.h\r
+ gPeiUsb2HostControllerPpiGuid = { 0xfedd6305, 0xe2d7, 0x4ed5, { 0x9f, 0xaa, 0xda, 0x8, 0xe, 0x33, 0x6c, 0x22 }}\r
+\r
+ ## Include/Ppi/UsbController.h\r
+ gPeiUsbControllerPpiGuid = { 0x3BC1F6DE, 0x693E, 0x4547, { 0xA3, 0x00, 0x21, 0x82, 0x3C, 0xA4, 0x20, 0xB2 }}\r
+\r
+ ## Include/Ppi/UsbIo.h\r
+ gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
+\r
+ ## Include/Ppi/Capsule.h\r
+ gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
+\r
+ ## Include/Ppi/SecPerformance.h\r
+ gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
+\r
+ ## Include/Ppi/SmmCommunication.h\r
+ gEfiPeiSmmCommunicationPpiGuid = { 0xae933e1c, 0xcc47, 0x4e38, { 0x8f, 0xe, 0xe2, 0xf6, 0x1d, 0x26, 0x5, 0xdf }}\r
+\r
+ ## Include/Ppi/SmmAccess.h\r
+ gPeiSmmAccessPpiGuid = { 0x268f33a9, 0xcccd, 0x48be, { 0x88, 0x17, 0x86, 0x5, 0x3a, 0xc3, 0x2e, 0xd6 }}\r
+\r
+ ## Include/Ppi/SmmControl.h\r
+ gPeiSmmControlPpiGuid = { 0x61c68702, 0x4d7e, 0x4f43, { 0x8d, 0xef, 0xa7, 0x43, 0x5, 0xce, 0x74, 0xc5 }}\r
+\r
+ ## Include/Ppi/PostBootScriptTable.h\r
+ gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
# Include/Protocol/FaultTolerantWrite.h\r
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
\r
+ ## This protocol provides boot-time service to do fault tolerant write capability for block devices in SMM environment.\r
+ # Include/Protocol/SmmFaultTolerantWrite.h\r
+ gEfiSmmFaultTolerantWriteProtocolGuid = { 0x3868fc3b, 0x7e45, 0x43a7, { 0x90, 0x6c, 0x4b, 0xa4, 0x7d, 0xe1, 0x75, 0x4d }}\r
+ \r
## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
# Include/Protocol/SwapAddressRange.h\r
gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
+ \r
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV in SMM environment.\r
+ # Include/Protocol/SmmSwapAddressRange.h\r
+ gEfiSmmSwapAddressRangeProtocolGuid = { 0x67c4f112, 0x3385, 0x4e55, { 0x9c, 0x5b, 0xc0, 0x5b, 0x71, 0x7c, 0x42, 0x28 }}\r
+ \r
+ ## This protocol is intended for use as a means to store data in the EFI SMM environment.\r
+ # Include/Protocol/SmmVariableProtocol.h\r
+ gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}\r
+\r
+ ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.\r
+ # Include/Protocol/VariableLock.h\r
+ gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
+\r
+ ## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
+ # Include/Protocol/SmmFirmwareVolumeBlock.h\r
+ gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
+\r
+ ## This protocol allows the error level mask for DEBUG() macros to be adjusted for DXE Phase modules\r
+ # Include/Guid/DebugMask.h \r
+ gEfiDebugMaskProtocolGuid = { 0x4c8a2451, 0xc207, 0x405b, {0x96, 0x94, 0x99, 0xea, 0x13, 0x25, 0x13, 0x41} }\r
+\r
+ ## Include/Protocol/LockBox.h\r
+ gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}\r
+ \r
+ ## Include/Protocol/FormBrowserEx.h\r
+ gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }\r
+\r
+ ## Include/Protocol/EbcVmTest.h\r
+ gEfiEbcVmTestProtocolGuid = { 0xAAEACCFD, 0xF27B, 0x4C17, { 0xB6, 0x10, 0x75, 0xCA, 0x1F, 0x2D, 0xFB, 0x52 } }\r
+\r
+ ## Include/Protocol/EbcSimpleDebugger.h\r
+ gEfiEbcSimpleDebuggerProtocolGuid = { 0x2a72d11e, 0x7376, 0x40f6, { 0x9c, 0x68, 0x23, 0xfa, 0x2f, 0xe3, 0x63, 0xf1 } }\r
+\r
+ ## Include/Protocol/BootLogo.h\r
+ gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
+\r
+ ## Include/Protocol/DisplayProtocol.h\r
+ gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
+\r
+ ## Include/Protocol/FormBrowserEx2.h\r
+ gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
\r
[PcdsFeatureFlag]\r
## Indicate whether platform can support update capsule across a system reset\r
# interrupt to access usb device in the case of absence of usb stack. \r
# DUET platform requires the token to be TRUE.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
-\r
+ \r
## If TRUE, HiiImageProtocol will be installed.\r
# FALSE is for size reduction.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
## This PCD specifies whether PciBus supports the hot plug device.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
\r
- ## This PCD specifies whether the Single Root I/O virtualization support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
-\r
- ## This PCD specifies whether the Alternative Routing-ID support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
-\r
- ## This PCD specifies whether the Multi Root I/O virtualization support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
-\r
## This PCD specifies whether the PCI bus driver probes non-standard, \r
# such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x10000047\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
## This PCD specifies whether StatusCode is reported via Serial port.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
\r
## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
\r
+ ## This PCD specified whether ACPI SDT protocol is installed.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
+\r
+ ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
+ # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
+ # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
+\r
+ ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
+ # If TRUE, TEXT statement will always be set to GrayOut.\r
+ # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
+ \r
+ ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.\r
+ # If TRUE, the unselectable menu will be set to GrayOut.\r
+ # If FALSE, the menu will be show as normal menu entry even if it is not selectable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
+\r
+ ## If TRUE, recovery from IDE disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
+\r
+ ## If TRUE, recovery from FAT floppy disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
+\r
+ ## If TRUE, recovery from data CD will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
+\r
+ ## If TRUE, recovery from FAT USB disk will be supported.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
+\r
+ ## If TRUE, S3 performance data will be supported in ACPI FPDT table.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
+\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
##\r
# This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
#\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
\r
+ ##\r
+ # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
+ # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
+\r
[PcdsFixedAtBuild]\r
## Dynamic type PCD can be registered callback function for Pcd setting action.\r
# PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
# for a dynamic PCD used in PEI phase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
\r
- ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
- # to store PCD value.\r
- #\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
-\r
## Maximum number of FV is supported by PeiCore's dispatching.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
\r
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
\r
- ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
# The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
# be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
\r
## FFS filename to find the ACPI tables\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
+\r
+ ## FFS filename to find the capsule coalesce image.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
\r
- ## Single root I/O virtualization virtual function memory BAR alignment\r
- # BITN set indicates 2 of n+12 power\r
- # BIT0 set indicates 4KB alignment\r
- # BIT1 set indicates 8KB alignment\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
- \r
## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
- # -1: Enable the feature as fixed offset to TOLM\r
- # 0: Disable the feature.\r
- # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
+ # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM\r
+ # 0: Disable the feature\r
+ # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
- \r
+\r
## Smbios version\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0206|UINT16|0x00010055\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
+\r
+ ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
+ # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
+\r
+ ## Progress Code for OS Loader LoadImage start.\r
+ # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
+\r
+ ## Progress Code for OS Loader StartImage start.\r
+ # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
+\r
+ ## Progress Code for S3 Suspend start.\r
+ # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
+\r
+ ## Progress Code for S3 Suspend end.\r
+ # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
\r
[PcdsFixedAtBuild,PcdsPatchableInModule]\r
+ ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
+ # to store PCD value.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
+\r
## Maximun number of performance log entries during PEI phase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
## RTC Update Timeout Value\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
\r
-[PcdsPatchableInModule,PcdsDynamic]\r
- ## This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
+ ## If TRUE, then 16550 serial port registers are in MMIO space. \r
+ # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
+ \r
+ ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
+ # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
+\r
+ ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
+ # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
+ \r
+ ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
+\r
+ ## Baud rate for the 16550 serial port. Default is 115200 baud.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
+\r
+ ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
+ # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
+ # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
+ # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
+ # BIT7..BIT6 - Reserved. Must be 0.\r
+ #\r
+ # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
+\r
+ ## FIFO Control Register (FCR) for the 16550 serial port. \r
+ # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
+ # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
+ # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
+ # BIT4..BIT3 - Reserved. Must be 0.\r
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
+ # BIT7..BIT6 - Reserved. Must be 0.\r
+ #\r
+ # Default is to enable and clear all FIFOs.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
+\r
+ ## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
+ # structure. The default value for this PCD is 0, which means that the DXE Core\r
+ # will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
+ # boundary as close to the top of memory as feasible. If this PCD is set to a \r
+ # value other than 0, then the DXE Core will first attempt to allocate the \r
+ # EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
+ # by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
+ # boundary as close to the top of memory as feasible.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
+\r
+ ## This PCD specifies whether to shadow PEIM on S3 boot path after memory is ready. \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
+[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
+ # This PCD could be set to 0 then console output could be at max column and max row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
- ## This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
+ ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r
+ # This PCD could be set to 0 then console output could be at max column and max row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
-[PcdsFixedAtBuild,PcdsDynamic]\r
+ ## This PCD defines the video horizontal resolution.\r
+ # This PCD could be set to 0 then video resolution could be at highest resolution.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
+\r
+ ## This PCD defines the video vertical resolution.\r
+ # This PCD could be set to 0 then video resolution could be at highest resolution.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
+\r
+[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
## Base address of the NV variable range in flash device\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
\r
- ## Base address of the FTW spare block range in flash device.\r
+ ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
\r
## Base address of the FTW working block range in flash device.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
\r
+ ## 64-bit Base address of the NV variable range in flash device\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
+\r
+ ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
+\r
+ ## 64-bit Base address of the FTW working block range in flash device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
+\r
## This PCD defines the print string.\r
# This PCD is a sample to explain String typed PCD usage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
# The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
\r
-[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
+ ## This PCD specifies whether the Single Root I/O virtualization support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
+\r
+ ## This PCD specifies whether the Alternative Routing-ID support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
+\r
+ ## This PCD specifies whether the Multi Root I/O virtualization support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
+\r
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## Single root I/O virtualization virtual function memory BAR alignment\r
+ # BITN set indicates 2 of n+12 power\r
+ # BIT0 set indicates 4KB alignment\r
+ # BIT1 set indicates 8KB alignment\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
+\r
## This PCD defines the times to print hello world string.\r
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
- ## Indicate the max size of the populated capsule image that the platform can support.\r
+ ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
# The default max size is 100MB (0x6400000) for more than one large capsule images.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
\r
- ## Indicate the max size of the non-populated capsule image that the platform can support.\r
- # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
+ ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
+ # The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
\r
## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0xx00010050\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
\r
## Firmware revision that is default value filled into the EFI System Table\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
# The default value in DxePhase is 128 KBytes.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
\r
+ ## This PCD specifies whether to reset system when memory type information changes.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
+\r
+ ## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
+ \r
+ ## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
+ # Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
+ \r
+ ## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BLACK)\r
+ # 0x01 (EFI_BLUE)\r
+ # 0x02 (EFI_GREEN)\r
+ # 0x03 (EFI_CYAN)\r
+ # 0x04 (EFI_RED)\r
+ # 0x05 (EFI_MAGENTA)\r
+ # 0x06 (EFI_BROWN)\r
+ # 0x07 (EFI_LIGHTGRAY)\r
+ # 0x08 (EFI_DARKGRAY) \r
+ # 0x09 (EFI_LIGHTBLUE)\r
+ # 0x0A (EFI_LIGHTGREEN)\r
+ # 0x0B (EFI_LIGHTCYAN)\r
+ # 0x0C (EFI_LIGHTRED)\r
+ # 0x0D (EFI_LIGHTMAGENTA)\r
+ # 0x0E (EFI_YELLOW)\r
+ # 0x0F (EFI_WHITE)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
+ \r
+ ## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
+ # 0x00 (EFI_BACKGROUND_BLACK)\r
+ # 0x10 (EFI_BACKGROUND_BLUE)\r
+ # 0x20 (EFI_BACKGROUND_GREEN)\r
+ # 0x30 (EFI_BACKGROUND_CYAN)\r
+ # 0x40 (EFI_BACKGROUND_RED)\r
+ # 0x50 (EFI_BACKGROUND_MAGENTA)\r
+ # 0x60 (EFI_BACKGROUND_BROWN)\r
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
+\r
+ ## Time in second to delay for SATA devices to spin-up for recovery.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
+\r
+ ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
+ # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
+ # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
+ # script node created in runtime phase.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
+\r
+ ## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
+ # The default size 32K. When changing the value of this PCD, the platform developer should\r
+ # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
+\r
+ ## This PCD specifies whether 1G page table is enabled.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
+\r
+ ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for \r
+ # the extension FPDT boot records got after ReadyToBoot and before ExitBootService.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
+\r
+ ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn\r
+ # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
+ # by Consplitter should be called before any real key read operation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
+\r
+ ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
+\r
+ ## This PCD specifies whether full PCI enumeration is disabled.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when \r
# the feature of Loading Module at Fixed Address is enabled\r
# the feature of Loading Module at Fixed Address is enabled\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
\r
+[PcdsDynamic, PcdsDynamicEx]\r
+ ## This dynamic PCD hold an address to point to private data structure used in DxeS3BootScriptLib library\r
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
+\r
+ ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
+\r
projects / mirror_edk2.git / blobdiff