-#/** @file\r
-# Mde Module Package Reference Implementations\r
+## @file MdeModulePkg.dec\r
#\r
-# This module provides headers and libraries that conform to EFI/PI Industry standards.\r
-# Copyright (c) 2007 - 2008, Intel Corporation.\r
+# This package provides the modules that conform to EFI/PI Industry standards.\r
+# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes) \r
+# and libraries instances, which are used for those modules.\r
+#\r
+# Copyright (c) 2007 - 2009, Intel Corporation.\r
#\r
# All rights reserved.\r
-# This program and the accompanying materials are licensed and made available under\r
-# the terms and conditions of the BSD License which accompanies this distribution.\r
-# The full text of the license may be found at\r
-# http://opensource.org/licenses/bsd-license.php\r
+# This program and the accompanying materials are licensed and made available under\r
+# the terms and conditions of the BSD License which accompanies this distribution.\r
+# The full text of the license may be found at\r
+# http://opensource.org/licenses/bsd-license.php\r
#\r
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
-#**/\r
+##\r
\r
\r
[Defines]\r
\r
\r
[LibraryClasses.common]\r
+ ## @libraryclass IpIo layer upon EFI IP4 Protocol.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
IpIoLib|Include/Library/IpIoLib.h\r
+ \r
+ ## @libraryclass Basic function for UEFI network stack.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
NetLib|Include/Library/NetLib.h\r
- ResetSystemLib|Include/Library/ResetSystemLib.h\r
+ \r
+ ## @libraryclass The helper routines to access UDP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
UdpIoLib|Include/Library/UdpIoLib.h\r
+ \r
+ ## @libraryclass Defines a set of methods to reset whole system.\r
+ ResetSystemLib|Include/Library/ResetSystemLib.h\r
+\r
+ ## @libraryclass Defines a set of methods related do S3 mode.\r
S3Lib|Include/Library/S3Lib.h\r
+ \r
+ ## @libraryclass Defines a set of methods related recovery mode.\r
RecoveryLib|Include/Library/RecoveryLib.h\r
- GenericBdsLib.h|Include/Library/GenericBdsLib.h\r
- PlatDriOverLib|Include/Library/PlatDriOverLib.h\r
- ExtendedHiiLib|Include/Library/ExtendedHiiLib.h\r
- ExtendedIfrSupportLib|Include/Library/ExtendedIfrSupportLib.h\r
+ \r
+ ## @libraryclass Provides HII related functions.\r
+ HiiLib|Include/Library/HiiLib.h\r
+ \r
+ ## @libraryclass Defines a set of interfaces on how to process capusle image update.\r
CapsuleLib|Include/Library/CapsuleLib.h\r
- PlatformBdsLib|Include/Library/PlatformBdsLib.h\r
- GenericBdsLib|Include/Library/GenericBdsLib.h\r
\r
+ ## @libraryclass Library for Deferred Procedure Calls.\r
+ DpcLib|Include/Library/DpcLib.h\r
+\r
+ ## @libraryclass Provides APIs for system memory test.\r
+ ##\r
+ MemoryTestLib|Include/Library/MemoryTestLib.h\r
+\r
+ ## @libraryclass Provides global variables that are pointers \r
+ ## to the UEFI HII related protocols. \r
+ ##\r
+ UefiHiiServicesLib|Include/Library/UefiHiiServicesLib.h\r
+\r
[Guids.common]\r
+ ## MdeModule package token space guid\r
+ ## Include/Guid/MdeModulePkgTokenSpace.h\r
+ gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
\r
+ ## Hob guid for Pcd DataBase\r
+ ## Include/Guid/PcdDataBaseHobGuid.h\r
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
- gEfiMdeModulePkgTokenSpaceGuid = { 0xA1AFF049, 0xFDEB, 0x442a, { 0xB3, 0x20, 0x13, 0xAB, 0x4C, 0xB7, 0x2B, 0xBC }}\r
- gPcdPeiCallbackFnTableHobGuid = { 0xC625F4B2, 0xEA09, 0x4675, { 0x82, 0xD7, 0xBA, 0x36, 0x82, 0x15, 0x7A, 0x14 }}\r
+ \r
+ ## Guid for EDKII implementation GUIDed opcodes\r
+ # Include/Guid/MdeModuleHii.h\r
+ gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
+ \r
+ ## Guid for Framework vfr GUIDed opcodes.\r
+ # Include/Guid/MdeModuleHii.h\r
+ gEfiIfrFrameworkGuid = { 0x31ca5d1a, 0xd511, 0x4931, { 0xb7, 0x82, 0xae, 0x6b, 0x2b, 0x17, 0x8c, 0xd7 }}\r
+ \r
+ ## Guid to specify the System Non Volatile FV\r
+ ## Include/Guid/SystemNvDataGuid.h\r
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
- gEfiSystemNvDataHobGuid = { 0xD6E5092D, 0xC7B2, 0x4872, { 0xAF, 0x66, 0xFD, 0xC0, 0xE6, 0xF9, 0x5E, 0x78 }}\r
-\r
- gEfiDiskInfoUsbInterfaceGuid = { 0xCB871572, 0xC11A, 0x47B5, { 0xB4, 0x92, 0x67, 0x5E, 0xAF, 0xA7, 0x77, 0x27 }}\r
- gEfiDiskInfoScsiInterfaceGuid = { 0x08F74BAA, 0xEA36, 0x41D9, { 0x95, 0x21, 0x21, 0xA7, 0x0F, 0x87, 0x80, 0xBC }}\r
- gEfiDiskInfoIdeInterfaceGuid = { 0x5E948FE3, 0x26D3, 0x42B5, { 0xAF, 0x17, 0x61, 0x02, 0x87, 0x18, 0x8D, 0xEC }}\r
- gEfiDiskInfoAhciInterfaceGuid = { 0x9e498932, 0x4abc, 0x45af, { 0xa3, 0x4d, 0x02, 0x47, 0x78, 0x7b, 0xe7, 0xc6 }}\r
-\r
- gEfiAlternateFvBlockGuid = { 0xF496922D, 0x172F, 0x4BBC, { 0xA1, 0xEB, 0x0E, 0xEB, 0x94, 0x9C, 0x34, 0x86 }}\r
+ \r
+ ## Guid specify the device is the console out device.\r
+ ## Include/Guid/ConsoleOutDevice.h\r
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- gEfiHotPlugDeviceGuid = { 0x220AC432, 0x1D43, 0x49E5, { 0xA7, 0x4F, 0x4C, 0x9D, 0xA6, 0x7A, 0xD2, 0x3B }}\r
- gEfiPrimaryConsoleOutDeviceGuid = { 0x62BDF38A, 0xE3D5, 0x492C, { 0x95, 0x0C, 0x23, 0xA7, 0xF6, 0x6E, 0x67, 0x2E }}\r
- gEfiPrimaryConsoleInDeviceGuid = { 0xE451DCBE, 0x96A1, 0x4729, { 0xA5, 0xCF, 0x6B, 0x9C, 0x2C, 0xFF, 0x47, 0xFD }}\r
- gEfiPrimaryStandardErrorDeviceGuid = { 0x5A68191B, 0x9B97, 0x4752, { 0x99, 0x46, 0xE3, 0x6A, 0x5D, 0xA9, 0x42, 0xB1 }}\r
\r
- gEfiDefaultBmpLogoGuid = { 0x7BB28B99, 0x61BB, 0x11D5, { 0x9A, 0x5D, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- gEfiBootStateGuid = { 0x60B5E939, 0x0FCF, 0x4227, { 0xBA, 0x83, 0x6B, 0xBE, 0xD4, 0x5B, 0xC0, 0xE3 }}\r
+ ## Guid specify the device is the console in device.\r
+ ## Include/Guid/ConsoleInDevice.h\r
+ gEfiConsoleInDeviceGuid = { 0xD3B36F2B, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
+ \r
+ ## Hob and Variable guid specify the platform memory type information.\r
+ ## Include/Guid/MemoryTypeInformation.h\r
gEfiMemoryTypeInformationGuid = { 0x4C19049F, 0x4137, 0x4DD3, { 0x9C, 0x10, 0x8B, 0x97, 0xA8, 0x3F, 0xFD, 0xFA }}\r
+ \r
+ ## Capsule update hob and variable guid\r
+ ## Include/Guid/CapsuleVendor.h\r
gEfiCapsuleVendorGuid = { 0x711C703F, 0xC285, 0x4B10, { 0xA3, 0xB0, 0x36, 0xEC, 0xBD, 0x3C, 0x8B, 0xE2 }}\r
- gPeiPerformanceHobGuid = { 0xEC4DF5AF, 0x4395, 0x4CC9, { 0x94, 0xDE, 0x77, 0x50, 0x6D, 0x12, 0xC7, 0xB8 }}\r
- gEfiGenericPlatformVariableGuid = { 0x59d1c24f, 0x50f1, 0x401a, { 0xb1, 0x01, 0xf3, 0x3e, 0x0d, 0xae, 0xd4, 0x43 }}\r
- gEfiShellFileGuid = { 0xC57AD6B7, 0x0515, 0x40A8, { 0x9D, 0x21, 0x55, 0x16, 0x52, 0x85, 0x4E, 0x37 }}\r
+ \r
+ ## Guid specifiy the device is the StdErr device.\r
+ ## Include/Guid/StandardErrorDevice.h\r
gEfiStandardErrorDeviceGuid = { 0xD3B36F2D, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- gEfiPeiPeCoffLoaderGuid = { 0xD8117CFF, 0x94A6, 0x11D4, { 0x9A, 0x3A, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}\r
- gEfiVariableInfoGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
- gSimpleTextInExNotifyGuid = { 0x856f2def, 0x4e93, 0x4d6b, { 0x94, 0xce, 0x1c, 0xfe, 0x47, 0x01, 0x3e, 0xa5 }}\r
- gEfiOverrideVariableGuid = { 0x8e3d4ad5, 0xf762, 0x438a, { 0xa1, 0xc1, 0x5b, 0x9f, 0xe6, 0x8c, 0x6b, 0x15 }}\r
+ \r
+ ## Guid acted as variable store header's signature and to specify the variable list entries put in the EFI system table.\r
+ ## Include/Guid/VariableFormat.h\r
+ gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
+ \r
+ ## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID\r
+ ## Include/Guid/Performance.h\r
+ gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
+\r
+ ## Guid is defined for CRC32 encapsulation scheme.\r
+ ## Include/Guid/Crc32GuidedSectionExtraction.h\r
+ gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
-[Protocols.common]\r
+ ## Include/Guid/NicIp4ConfigNvData.h\r
+ gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
\r
- gEfiCapsuleArchProtocolGuid = { 0x5053697E, 0x2CBC, 0x4819, { 0x90, 0xD9, 0x05, 0x80, 0xDE, 0xEE, 0x57, 0x54 }}\r
+[Protocols.common] \r
+ ## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
+ ## Include/Protocol/LoadPe32Image.h\r
+ ## This protocol is deprecated. Native EDKII module should NOT use this protocol to load/unload image.\r
+ ## If developer need implement such functionality, they should use BasePeCoffLib.\r
gEfiLoadPeImageProtocolGuid = { 0x5CB5C776, 0x60D5, 0x45EE, { 0x88, 0x3C, 0x45, 0x27, 0x08, 0xCD, 0x74, 0x3F }}\r
- gEfiPrintProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
- gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
- gEfiDiskInfoProtocolGuid = { 0xD432A67F, 0x14DC, 0x484B, { 0xB3, 0xBB, 0x3F, 0x02, 0x91, 0x84, 0x93, 0x27 }}\r
- gEfiFvbExtensionProtocolGuid = { 0x53A4C71B, 0xB581, 0x4170, { 0x91, 0xB3, 0x8D, 0xB8, 0x7A, 0x4B, 0x5C, 0x46 }}\r
- gEfiFaultTolerantWriteLiteProtocolGuid = { 0x3F557189, 0x8DAE, 0x45AE, { 0xA0, 0xB3, 0x2B, 0x99, 0xCA, 0x7A, 0xA7, 0xA0 }}\r
- gEfiConsoleControlProtocolGuid = { 0xF42F7782, 0x012E, 0x4C12, { 0x99, 0x56, 0x49, 0xF9, 0x43, 0x04, 0xF7, 0x21 }}\r
- gEfiOEMBadgingProtocolGuid = { 0x170E13C0, 0xBF1B, 0x4218, { 0x87, 0x1D, 0x2A, 0xBD, 0xC6, 0xF8, 0x87, 0xBC }}\r
- gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 }}\r
- gEfiCrc32GuidedSectionExtractionProtocolGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
- gEfiFirmwareVolumeDispatchProtocolGuid = { 0x7AA35A69, 0x506C, 0x444F, { 0xA7, 0xAF, 0x69, 0x4B, 0xF5, 0x6F, 0x71, 0xC8 }}\r
+ \r
+ ## Print protocol defines six basic print functions to print the format unicode and ascii string.\r
+ ## Include/Protocol/Print2.h\r
+ gEfiPrint2ProtocolGuid = { 0x5bcc3dbc, 0x8c57, 0x450a, { 0xbb, 0x0c, 0xa1, 0xc0, 0xbd, 0xde, 0x48, 0x0c }}\r
\r
- gEfiNicIp4ConfigProtocolGuid = {0xdca3d4d, 0x12da, 0x4728, { 0xbf, 0x7e, 0x86, 0xce, 0xb9, 0x28, 0xd0, 0x67 }}\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
- gEfiTcpProtocolGuid = {0x02b3d5f2, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x27, 0x3f, 0xc1, 0x4d }}\r
- gEfiPxeDhcp4CallbackProtocolGuid = {0xc1544c01, 0x92a4, 0x4198, {0x8a, 0x84, 0x77, 0x85, 0x83, 0xc2, 0x36, 0x21 }}\r
- gEfiPxeDhcp4ProtocolGuid = {0x03c4e624, 0xac28, 0x11d3, { 0x9a, 0x2d, 0x00, 0x90, 0x29, 0x3f, 0xc1, 0x4d }}\r
+ ## This protocol defines the generic memory test interfaces in Dxe phase.\r
+ ## Include/Protocol/GenericMemoryTest.h\r
+ gEfiGenericMemTestProtocolGuid = { 0x309DE7F1, 0x7F5E, 0x4ACE, { 0xB4, 0x9C, 0x53, 0x1B, 0xE5, 0xAA, 0x95, 0xEF }}\r
+ \r
+ ## Include/Protocol/Dpc.h\r
gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}\r
- gEfiTcgPlatformProtocolGuid = { 0x8c4c9a41, 0xbf56, 0x4627, { 0x9e, 0xa, 0xc8, 0x38, 0x6d, 0x66, 0x11, 0x5c }}\r
-\r
-[Ppis.common]\r
- gPeiBaseMemoryTestPpiGuid = { 0xB6EC423C, 0x21D2, 0x490D, { 0x85, 0xC6, 0xDD, 0x58, 0x64, 0xEA, 0xA6, 0x74 }}\r
-\r
- ##gPeiFlashMapPpiGuid will be removed in future\r
- gPeiFlashMapPpiGuid = { 0xf34c2fa0, 0xde88, 0x4270, {0x84, 0x14, 0x96, 0x12, 0x22, 0xf4, 0x52, 0x1c } }\r
-\r
- gPeiOperatorPresencePpiGuid = { 0x20a7378c, 0xaa83, 0x4ce1, {0x82, 0x1f, 0x47, 0x40, 0xee, 0x1b, 0x3f, 0x9f } }\r
-\r
-[PcdsFeatureFlag.common]\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleRest|FALSE|BOOLEAN|0x0001001d\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010020\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxePcdDatabaseTraverseEnabled|TRUE|BOOLEAN|0x00010021\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseSetEnabled|TRUE|BOOLEAN|0x00010030\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseGetSizeEnabled|TRUE|BOOLEAN|0x00010031\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseCallbackOnSetEnabled|TRUE|BOOLEAN|0x00010032\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiPcdDatabaseExEnabled|TRUE|BOOLEAN|0x00010033\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportEfiDecompress|TRUE|BOOLEAN|0x00010034\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportTianoDecompress|TRUE|BOOLEAN|0x00010035\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportCustomDecompress|TRUE|BOOLEAN|0x00010036\r
+ \r
+ ## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.\r
+ # Include/Protocol/FaultTolerantWrite.h\r
+ gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}\r
+ \r
+ ## This protocol is used to abstract the swap operation of boot block and backup block of boot FV.\r
+ # Include/Protocol/SwapAddressRange.h\r
+ gEfiSwapAddressRangeProtocolGuid = { 0x1259F60D, 0xB754, 0x468E, { 0xA7, 0x89, 0x4D, 0xB8, 0x5D, 0x55, 0xE8, 0x7E }}\r
+ \r
+[PcdsFeatureFlag]\r
+ ## Indicate whether platform can support update capsule across a system reset\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
+ \r
+ ## This feature flag can be used to enable or disable all PCD PEIM services.\r
+ # If TRUE, all PCD PPI services will be produced.\r
+ ## If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
+\r
+ ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
+ # It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
+ \r
+ ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
+ # It can be disabled to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildShareCodeHobs|FALSE|BOOLEAN|0x0001003c\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdNtEmulatorEnable|FALSE|BOOLEAN|0x0001003e\r
+ \r
+ ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
+ # stored as a vendor configuration table into the EFI system table.\r
+ # If user wants to get variable usage info, this pcd should be set as TRUE.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
+ \r
+ ## If TRUE, Unicode Collation Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
+ \r
+ ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
+ \r
+ ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
+ # It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
+ \r
+ ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
+ # It could be set FALSE to save size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
+ \r
+ ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
+ # If TE section is not found, then PeiCore will search PE section.\r
+ # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
+ # This PCD is used to tune Pei phase performance to reduce the search image time.\r
+ # It can be set according to the generated image section type.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHardwareErrorRecord|FALSE|BOOLEAN|0x00010045\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdUgaConsumeSupport|TRUE|BOOLEAN|0x00010046\r
+ \r
+ ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
+ # interrupt to access usb device in the case of absence of usb stack.\r
+ ##\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
\r
+ ## If TRUE, HiiImageProtocol will be installed.\r
+ # FALSE is for size reduction.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010101\r
-\r
+ \r
+ ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
+ # The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
+ # from HII database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010201\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSupportFullConfigRoutingProtocol|TRUE|BOOLEAN|0x00010202\r
\r
-[PcdsFixedAtBuild.common]\r
+ ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler. \r
+ # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
+ ## This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
+ \r
+ ##\r
+ # If TRUE, HelloWorld Application will print the verbose information.\r
+ # This PCD is a sample to explain FeatureFlag PCD usage.\r
+ ##\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
+\r
+ ##\r
+ # If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
+ # If FASLE, only FTW Write service is available.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
+\r
+ ##\r
+ # If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
+ # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
+\r
+[PcdsFeatureFlag.IA32]\r
+ ## \r
+ # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
+ # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
+ # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
+ # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
+ # is built in firmware.\r
+ #\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
+\r
+[PcdsFixedAtBuild]\r
+ ## Dynamic type PCD can be registered callback function for Pcd setting action.\r
+ # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
+ # for a dynamic PCD used in PEI phase.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
+\r
+ ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
+ # to store PCD value. \r
+ #\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
+ \r
+ ## Maximum number of FV is supported by PeiCore's dispatching.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
+\r
+ ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
+\r
+ ## Maximum stack size for PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
+\r
+ ## Maximum PPI count is supported by PeiCore's PPI database.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
+ \r
+ ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write. \r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
+ \r
+ ## The maximum size of single common variable, that is non-HwErr type varible.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
+ \r
+ ## The maximum size of single hardware error record variable.\r
+ # In IA32/X64 platforms, this value should be larger than 1KB.\r
+ # In IA64 platforms, this value should be larger than 128KB.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
+ \r
+ ## The size of reserved HwErr variable space. This space is located at NV variable range.\r
+ # HwErr type variable is stored with common non-volatile variables in NV region.\r
+ # this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x8000|UINT32|0x30000006\r
+\r
+ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|10|UINT16|0x40000001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002\r
\r
-[PcdsDynamic.common]\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
+ \r
+ ## Size of the FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|10|UINT16|0x40000001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002\r
\r
-[PcdsPatchableInModule.common]\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformBootTimeOutDefault|10|UINT16|0x40000001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHardwareErrorRecordLevel|1|UINT16|0x40000002\r
+ ## FFS filename to find the ACPI tables\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|16\r
\r
-[PcdsFeatureFlag.IA32]\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplEnableIdt|TRUE|BOOLEAN|0x0001003d\r
+[PcdsFixedAtBuild,PcdsPatchableInModule]\r
+ ## Maximun number of performance log entries during PEI phase.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
+ ## RTC Update Timeout Value\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
+ \r
+[PcdsPatchableInModule,PcdsDynamic]\r
+ ##\r
+ # This PCD defines the Console output column and the default value is 25 according to UEFI spec\r
+ ##\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
+ \r
+ ##\r
+ # This PCD defines the Console output row and the default value is 80 according to UEFI spec\r
+ ##\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
+ \r
+[PcdsFixedAtBuild,PcdsDynamic]\r
+ ## Base address of the NV variable range in flash device \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
+ \r
+ ## Base address of the FTW spare block range in flash device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013 \r
+ \r
+ ## Base address of the FTW working block range in flash device.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010 \r
+ \r
+ ##\r
+ # This PCD defines the print string.\r
+ # This PCD is a sample to explain String typed PCD usage.\r
+ ##\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004 \r
+ \r
+[PcdsFixedAtBuild,PcdsPatchableInModule,PcdsDynamic]\r
+ ##\r
+ # This PCD defines the times to print hello world string.\r
+ # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
+ ##\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
+ ## Indicate the max size of the populated capsule image that the platform can support.\r
+ # The default max size is 100MB (0x6400000) for more than one large capsule images. \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
+ \r
+ ## Indicate the max size of the non-populated capsule image that the platform can support.\r
+ # The default max size is 10MB (0xa00000) for the casule image without populated flag setting.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
projects / mirror_edk2.git / blobdiff