# This library is only intended to be used by UEFI network stack modules.\r
TcpIoLib|Include/Library/TcpIoLib.h\r
\r
+ ## @libraryclass The helper routines to access HTTP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ HttpLib|Include/Library/HttpLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
#\r
AuthVariableLib|Include/Library/AuthVariableLib.h\r
\r
+ ## @libraryclass Provides variable check services and database management.\r
+ #\r
+ VarCheckLib|Include/Library/VarCheckLib.h\r
+\r
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
+ #\r
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
+\r
+ ## @libraryclass Provides image decoding service.\r
+ #\r
+ ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
+\r
+ ## @libraryclass Provides interfaces about logo display.\r
+ #\r
+ BootLogoLib|Include/Library/BootLogoLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
- ## Include/Guid/NicIp4ConfigNvData.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
-\r
## Include/Guid/StatusCodeCallbackGuid.h\r
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4ConfigHii.h\r
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+ ## Include/Guid/Ip4Config2Hii.h\r
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
\r
## Include/Guid/VlanConfigHii.h\r
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
\r
+ ## Include/Guid/TtyTerm.h\r
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+\r
+ ## Include/Guid/HiiBootMaintenanceFormset.h\r
+ gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
+ \r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Protocol/SmmReadyToBoot.h\r
gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
\r
+ ## Include/Protocol/PlatformLogo.h\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
+\r
#\r
# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
# 0x80000001 | Invalid value provided.\r
# @Prompt Shadow Peim On S3 Boot. \r
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
\r
+ ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
+ # This PCD is used on other boot path except for S3 boot. \r
+ # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
+ # FALSE - Not shadow PEIM after memory is ready.<BR>\r
+ # @Prompt Shadow Peim and PeiCore on boot\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
+\r
## The mask is used to control memory profile behavior.<BR><BR>\r
# BIT0 - Enable UEFI memory profile.<BR>\r
# BIT1 - Enable SMRAM profile.<BR>\r
\r
## This PCD points to the file name GUID of the BootManagerMenuApp\r
# Platform can customize the PCD to point to different application for Boot Manager Menu\r
+ # @Prompt Boot Manager Menu File\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
\r
## This PCD points to the formset GUID of the driver health management form\r
# The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
# Platform can customize the PCD to point to different formset.\r
+ # @Prompt Driver Health Management Form\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
\r
## The number of bytes between registers in serial device. The default is 1 byte.\r
# @Prompt Serial Port Register Stride in Bytes\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
- \r
+\r
+ ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
+ # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
+ # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
+ # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
+\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
- ## This PCD defines the Console output row. The default value is 80 according to UEFI spec.\r
+ ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
# This PCD could be set to 0 then console output would be at max column and max row.\r
# @Prompt Console output column.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
## This PCD points to the front page formset GUID\r
# Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ # @Prompt Front Page Formset.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
\r
## Base address of the NV variable range in flash device.\r
# @Prompt SATA spin-up delay time in second for recovery path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
- ## This PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
- # script node created in runtime phase.\r
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
+ # When changing the value of this PCD, the platform developer should make sure the memory size is\r
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
# @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
# @Prompt Default Creator Revision for ACPI table creation.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # TRUE - to set NX for stack.<BR>\r
+ # FALSE - Not to set NX for stack.<BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
[PcdsPatchableInModule]\r
## Specify memory size with page number for PEI code when\r
# Loading Module at Fixed Address feature is enabled.\r
projects / mirror_edk2.git / blobdiff