## @file MdeModulePkg.dec\r
-#\r
# This package provides the modules that conform to UEFI/PI Industry standards.\r
-# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
+# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)\r
# and libraries instances, which are used for those modules.\r
#\r
-# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.<BR>\r
+# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.<BR>\r
# This program and the accompanying materials are licensed and made available under \r
# the terms and conditions of the BSD License that accompanies this distribution. \r
# The full text of the license may be found at\r
[Defines]\r
DEC_SPECIFICATION = 0x00010005\r
PACKAGE_NAME = MdeModulePkg\r
+ PACKAGE_UNI_FILE = MdeModulePkg.uni\r
PACKAGE_GUID = BA0D78D6-2CAF-414b-BD4D-B6762A894288\r
- PACKAGE_VERSION = 0.92\r
+ PACKAGE_VERSION = 0.96\r
\r
[Includes]\r
Include\r
# This library is only intended to be used by UEFI network stack modules.\r
TcpIoLib|Include/Library/TcpIoLib.h\r
\r
+ ## @libraryclass The helper routines to access HTTP service.\r
+ # This library is only intended to be used by UEFI network stack modules.\r
+ HttpLib|Include/Library/HttpLib.h\r
+\r
## @libraryclass Defines a set of methods to reset whole system.\r
ResetSystemLib|Include/Library/ResetSystemLib.h\r
\r
#\r
CpuExceptionHandlerLib|Include/Library/CpuExceptionHandlerLib.h\r
\r
+ ## @libraryclass Provides platform specific display interface.\r
+ #\r
+ CustomizedDisplayLib|Include/Library/CustomizedDisplayLib.h\r
+\r
+ ## @libraryclass Provides sorting functions\r
+ SortLib|Include/Library/SortLib.h\r
+\r
+ ## @libraryclass Provides core boot manager functions\r
+ UefiBootManagerLib|Include/Library/UefiBootManagerLib.h\r
+\r
+ ## @libraryclass Provides core boot manager functions\r
+ PlatformBootManagerLib|Include/Library/PlatformBootManagerLib.h\r
+\r
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
+ #\r
+ TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
+\r
+ ## @libraryclass Provides authenticated variable services.\r
+ #\r
+ AuthVariableLib|Include/Library/AuthVariableLib.h\r
+\r
+ ## @libraryclass Provides variable check services and database management.\r
+ #\r
+ VarCheckLib|Include/Library/VarCheckLib.h\r
+\r
+ ## @libraryclass Provides services to get variable error flag and do platform variable cleanup.\r
+ #\r
+ PlatformVarCleanupLib|Include/Library/PlatformVarCleanupLib.h\r
+\r
+ ## @libraryclass Provides image decoding service.\r
+ #\r
+ ImageDecoderLib|Include/Library/ImageDecoderLib.h\r
+\r
+ ## @libraryclass Provides interfaces about logo display.\r
+ #\r
+ BootLogoLib|Include/Library/BootLogoLib.h\r
+\r
[Guids]\r
## MdeModule package token space guid\r
# Include/Guid/MdeModulePkgTokenSpace.h\r
# Include/Guid/PcdDataBaseHobGuid.h\r
gPcdDataBaseHobGuid = { 0xEA296D92, 0x0B69, 0x423C, { 0x8C, 0x28, 0x33, 0xB4, 0xE0, 0xA9, 0x12, 0x68 }}\r
\r
+ ## Guid for PCD DataBase signature.\r
+ # Include/Guid/PcdDataBaseSignatureGuid.h\r
+ gPcdDataBaseSignatureGuid = { 0x3c7d193c, 0x682c, 0x4c14, { 0xa6, 0x8f, 0x55, 0x2d, 0xea, 0x4f, 0x43, 0x7e }}\r
+\r
## Guid for EDKII implementation GUIDed opcodes\r
# Include/Guid/MdeModuleHii.h\r
gEfiIfrTianoGuid = { 0xf0b1735, 0x87a0, 0x4193, {0xb2, 0x66, 0x53, 0x8c, 0x38, 0xaf, 0x48, 0xce }}\r
# Include/Guid/VariableFormat.h\r
gEfiVariableGuid = { 0xddcf3616, 0x3275, 0x4164, { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
\r
+ ## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
+ # Include/Guid/AuthenticatedVariableFormat.h\r
+ gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
+\r
# Include/Guid/VariableIndexTable.h\r
gEfiVariableIndexTableGuid = { 0x8cfdb8c8, 0xd6b2, 0x40f3, { 0x8e, 0x97, 0x02, 0x30, 0x7c, 0xc9, 0x8b, 0x7c }}\r
\r
# Include/Guid/Crc32GuidedSectionExtraction.h\r
gEfiCrc32GuidedSectionExtractionGuid = { 0xFC1BCDB0, 0x7D31, 0x49aa, {0x93, 0x6A, 0xA4, 0x60, 0x0D, 0x9D, 0xD0, 0x83 } }\r
\r
- ## Include/Guid/NicIp4ConfigNvData.h\r
- gEfiNicIp4ConfigVariableGuid = {0xd8944553, 0xc4dd, 0x41f4, { 0x9b, 0x30, 0xe1, 0x39, 0x7c, 0xfb, 0x26, 0x7b }}\r
-\r
## Include/Guid/StatusCodeCallbackGuid.h\r
gStatusCodeCallbackGuid = {0xe701458c, 0x4900, 0x4ca5, {0xb7, 0x72, 0x3d, 0x37, 0x94, 0x9f, 0x79, 0x27}}\r
\r
## Include/Guid/PlatDriOverrideHii.h\r
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}\r
\r
- ## Include/Guid/Ip4ConfigHii.h\r
- gNicIp4ConfigNvDataGuid = { 0x9d5b53f, 0xf4b0, 0x4f59, { 0xa0, 0xb1, 0x7b, 0x57, 0xd3, 0x5c, 0xe, 0x5 }}\r
+ ## Include/Guid/Ip4Config2Hii.h\r
+ gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}\r
\r
## Include/Guid/VlanConfigHii.h\r
gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}\r
## Include/Guid/ConnectConInEvent.h\r
gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}\r
\r
+ ## Include/Guid/StatusCodeDataTypeVariable.h\r
+ gEdkiiStatusCodeDataTypeVariableGuid = { 0xf6ee6dbb, 0xd67f, 0x4ea0, { 0x8b, 0x96, 0x6a, 0x71, 0xb1, 0x9d, 0x84, 0xad }}\r
+ \r
+ ## Include/Guid/MemoryProfile.h\r
+ gEdkiiMemoryProfileGuid = { 0x821c9a09, 0x541a, 0x40f6, { 0x9f, 0x43, 0xa, 0xd1, 0x93, 0xa1, 0x2c, 0xfe }}\r
+\r
+ ## Include/Protocol/VarErrorFlag.h\r
+ gEdkiiVarErrorFlagGuid = { 0x4b37fe8, 0xf6ae, 0x480b, { 0xbd, 0xd5, 0x37, 0xd9, 0x8c, 0x5e, 0x89, 0xaa } }\r
+\r
+ ## GUID indicates the LZMA custom compress/decompress algorithm.\r
+ # Include/Guid/LzmaDecompress.h\r
+ gLzmaCustomDecompressGuid = { 0xEE4E5898, 0x3914, 0x4259, { 0x9D, 0x6E, 0xDC, 0x7B, 0xD7, 0x94, 0x03, 0xCF }}\r
+ gLzmaF86CustomDecompressGuid = { 0xD42AE6BD, 0x1352, 0x4bfb, { 0x90, 0x9A, 0xCA, 0x72, 0xA6, 0xEA, 0xE8, 0x89 }}\r
+\r
+ ## Include/Guid/TtyTerm.h\r
+ gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}\r
+\r
+ ## Include/Guid/HiiBootMaintenanceFormset.h\r
+ gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}\r
+ \r
[Ppis]\r
## Include/Ppi/AtaController.h\r
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}\r
## Include/Ppi/UsbIo.h\r
gPeiUsbIoPpiGuid = { 0x7C29785C, 0x66B9, 0x49FC, { 0xB7, 0x97, 0x1C, 0xA5, 0x55, 0x0E, 0xF2, 0x83 }}\r
\r
- ## Include/Ppi/Capsule.h\r
- gPeiCapsulePpiGuid = { 0x3acf33ee, 0xd892, 0x40f4, { 0xa2, 0xfc, 0x38, 0x54, 0xd2, 0xe1, 0x32, 0x3d }}\r
-\r
## Include/Ppi/SecPerformance.h\r
gPeiSecPerformancePpiGuid = { 0x0ecc666b, 0x4662, 0x47f9, { 0x9d, 0xd5, 0xd0, 0x96, 0xff, 0x7d, 0xa4, 0x9e }}\r
\r
## Include/Ppi/PostBootScriptTable.h\r
gPeiPostScriptTablePpiGuid = { 0x88c9d306, 0x900, 0x4eb5, { 0x82, 0x60, 0x3e, 0x2d, 0xbe, 0xda, 0x1f, 0x89}}\r
\r
+ ## Include/Ppi/SerialPortPei.h\r
+ gPeiSerialPortPpiGuid = { 0x490e9d85, 0x8aef, 0x4193, { 0x8e, 0x56, 0xf7, 0x34, 0xa9, 0xff, 0xac, 0x8b}}\r
+\r
+ ## Include/Ppi/UfsHostController.h\r
+ gEdkiiPeiUfsHostControllerPpiGuid = { 0xdc54b283, 0x1a77, 0x4cd6, { 0x83, 0xbb, 0xfd, 0xda, 0x46, 0x9a, 0x2e, 0xc6 }}\r
+\r
[Protocols]\r
## Load File protocol provides capability to load and unload EFI image into memory and execute it.\r
# Include/Protocol/LoadPe32Image.h\r
# Include/Protocol/VariableLock.h\r
gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}\r
\r
+ ## Include/Protocol/VarCheck.h\r
+ gEdkiiVarCheckProtocolGuid = { 0xaf23b340, 0x97b4, 0x4685, { 0x8d, 0x4f, 0xa3, 0xf2, 0x81, 0x69, 0xb2, 0x1d } }\r
+\r
+ ## Include/Protocol/SmmVarCheck.h\r
+ gEdkiiSmmVarCheckProtocolGuid = { 0xb0d8f3c1, 0xb7de, 0x4c11, { 0xbc, 0x89, 0x2f, 0xb5, 0x62, 0xc8, 0xc4, 0x11 } }\r
+\r
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.\r
# Include/Protocol/SmmFirmwareVolumeBlock.h\r
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}\r
## Include/Protocol/BootLogo.h\r
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }\r
\r
+ ## Include/Protocol/DisplayProtocol.h\r
+ gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }\r
+\r
+ ## Include/Protocol/FormBrowserEx2.h\r
+ gEdkiiFormBrowserEx2ProtocolGuid = { 0xa770c357, 0xb693, 0x4e6d, { 0xa6, 0xcf, 0xd2, 0x1c, 0x72, 0x8e, 0x55, 0xb } }\r
+\r
+ ## Include/Protocol/UfsHostController.h\r
+ gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }\r
+ \r
+ ## Include/Protocol/EsrtManagement.h\r
+ gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}\r
+\r
+ ## Include/Protocol/SmmExitBootServices.h\r
+ gEdkiiSmmExitBootServicesProtocolGuid = { 0x296eb418, 0xc4c8, 0x4e05, { 0xab, 0x59, 0x39, 0xe8, 0xaf, 0x56, 0xf0, 0xa } }\r
+\r
+ ## Include/Protocol/SmmLegacyBoot.h\r
+ gEdkiiSmmLegacyBootProtocolGuid = { 0x85a8ab57, 0x644, 0x4110, { 0x85, 0xf, 0x98, 0x13, 0x22, 0x4, 0x70, 0x70 } }\r
+\r
+ ## Include/Protocol/SmmReadyToBoot.h\r
+ gEdkiiSmmReadyToBootProtocolGuid = { 0x6e057ecf, 0xfa99, 0x4f39, { 0x95, 0xbc, 0x59, 0xf9, 0x92, 0x1d, 0x17, 0xe4 } }\r
+\r
+ ## Include/Protocol/PlatformLogo.h\r
+ gEdkiiPlatformLogoProtocolGuid = { 0x9b517978, 0xeba1, 0x44e7, { 0xba, 0x65, 0x7c, 0x2c, 0xd0, 0x8b, 0xf8, 0xe9 } }\r
+\r
+#\r
+# [Error.gEfiMdeModulePkgTokenSpaceGuid]\r
+# 0x80000001 | Invalid value provided.\r
+# 0x80000002 | Reserved bits must be set to zero.\r
+# 0x80000003 | Incorrect progress code provided.\r
+# 0x80000004 | Invalid foreground color specified.\r
+# 0x80000005 | Invalid background color specified.\r
+# 0x80000006 | Incorrect error code provided.\r
+#\r
+\r
[PcdsFeatureFlag]\r
- ## Indicate whether platform can support update capsule across a system reset\r
+ ## Indicates if the platform can support update capsule across a system reset.<BR><BR>\r
+ # TRUE - Supports update capsule across a system reset.<BR>\r
+ # FALSE - Does not support update capsule across a system reset.<BR>\r
+ # @Prompt Enable update capsule across a system reset.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportUpdateCapsuleReset|FALSE|BOOLEAN|0x0001001d\r
\r
- ## This feature flag can be used to enable or disable all PCD PEIM services.\r
- # If TRUE, all PCD PPI services will be produced.\r
- # If FALSE, the minimal PCD PEIM services (only GetService) will be produced.\r
+ ## Indicates if all PCD PPI services will be enabled.<BR><BR>\r
+ # TRUE - All PCD PPI services will be produced.<BR>\r
+ # FALSE - Minimal PCD PPI services (only GetService) will be produced.<BR>\r
+ # @Prompt Enable full PEI PCD services.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiFullPcdDatabaseEnable|TRUE|BOOLEAN|0x00010020\r
\r
- ## If TRUE, then the Device Path To Text Protocol should be produced by the platform.\r
- # It can be disabled to save size.\r
+ ## Indicates if the Device Path To Text Protocol should be produced by the platform.\r
+ # It can be disabled to save size.<BR><BR>\r
+ # TRUE - Device Path To Text Protocol will be produced.<BR>\r
+ # FALSE - Device Path To Text Protocol will not be produced.<BR>\r
+ # @Prompt Enable Device Path to Text support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathToText|TRUE|BOOLEAN|0x00010037\r
\r
- ## If TRUE, then the Device Path From Text Protocol should be produced by the platform.\r
- # It can be disabled to save size.\r
+ ## Indicates if the Device Path From Text Protocol should be produced by the platform.\r
+ # It can be disabled to save size.<BR><BR>\r
+ # TRUE - Device Path From Text Protocol will be produced.<BR>\r
+ # FALSE - Device Path From Text Protocol will not be produced.<BR>\r
+ # @Prompt Enable Device Path From Text support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038\r
\r
- ## If TRUE, enable the statistic functionality about variable usage. Such information is\r
+ ## Indicates if the statistics about variable usage will be collected. This information is\r
# stored as a vendor configuration table into the EFI system table.\r
- # If user wants to use VariableInfo application in MdeModulePkg\Application directory to get\r
- # variable usage info, this pcd should be set as TRUE. Otherwise VariableInfo application can\r
- # not output useful info.\r
+ # Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get\r
+ # variable usage info. VariableInfo application will not output information if not set to TRUE.<BR><BR>\r
+ # TRUE - Statistics about variable usage will be collected.<BR>\r
+ # FALSE - Statistics about variable usage will not be collected.<BR>\r
+ # @Prompt Enable variable statistics collection.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableCollectStatistics|FALSE|BOOLEAN|0x0001003f\r
\r
- ## If TRUE, Unicode Collation Protocol will be installed.\r
+ ## Indicates if Unicode Collation Protocol will be installed.<BR><BR>\r
+ # TRUE - Installs Unicode Collation Protocol.<BR>\r
+ # FALSE - Does not install Unicode Collation Protocol.<BR>\r
+ # @Prompt Enable Unicode Collation support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollationSupport|TRUE|BOOLEAN|0x00010040\r
\r
- ## If TRUE, Unicode Collation 2 Protocol will be installed.\r
+ ## Indicates if Unicode Collation 2 Protocol will be installed.<BR><BR>\r
+ # TRUE - Installs Unicode Collation 2 Protocol.<BR>\r
+ # FALSE - Does not install Unicode Collation 2 Protocol.<BR>\r
+ # @Prompt Enable Unicode Collation 2 support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnicodeCollation2Support|TRUE|BOOLEAN|0x00010041\r
\r
- ## If TRUE, Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
- # It could be set FALSE to save size.\r
+ ## Indicates if Graphics Output Protocol will be installed on virtual handle created by ConsplitterDxe.\r
+ # It could be set FALSE to save size.<BR><BR>\r
+ # TRUE - Installs Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
+ # FALSE - Does not install Graphics Output Protocol on virtual handle created by ConsplitterDxe.<BR>\r
+ # @Prompt Enable ConOut GOP support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutGopSupport|TRUE|BOOLEAN|0x00010042\r
\r
- ## If TRUE, UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
- # It could be set FALSE to save size.\r
+ ## Indicates if UGA Draw Protocol will be installed on virtual handle created by ConsplitterDxe.\r
+ # It could be set FALSE to save size.<BR><BR>\r
+ # TRUE - Installs UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
+ # FALSE - Does not install UGA Draw Protocol on virtual handle created by ConsplitterDxe.<BR>\r
+ # @Prompt Enable ConOut UGA support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutUgaSupport|TRUE|BOOLEAN|0x00010043\r
\r
- ## If TRUE, when PeiCore dispatches a PEI module, PeiCore will first search TE section from this PEIM to load the image.\r
- # If TE section is not found, then PeiCore will search PE section.\r
- # If FALSE, PeiCore will first search PE section from PEIM to load the image.\r
- # This PCD is used to tune Pei phase performance to reduce the search image time.\r
- # It can be set according to the generated image section type.\r
+ ## Indicates PeiCore will first search TE section from the PEIM to load the image, or PE32 section, when PeiCore dispatches a PEI module.\r
+ # This PCD is used to tune PEI phase performance to reduce the search image time.\r
+ # It can be set according to the generated image section type.<BR><BR>\r
+ # TRUE - PeiCore will first search TE section from PEIM to load the image, if TE section is not found, then PeiCore will search PE section.<BR>\r
+ # FALSE - PeiCore will first search PE section from PEIM to load the image.<BR>\r
+ # @Prompt PeiCore search TE section first.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreImageLoaderSearchTeSectionFirst|TRUE|BOOLEAN|0x00010044\r
\r
- ## If TRUE, force to switch off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
- # interrupt to access usb device in the case of absence of usb stack. \r
- # DUET platform requires the token to be TRUE.\r
+ ## Indicates if to turn off the support of legacy usb. So legacy usb device driver can not make use of SMI\r
+ # interrupt to access usb device in the case of absence of usb stack.\r
+ # DUET platform requires the token to be TRUE.<BR><BR>\r
+ # TRUE - Turn off usb legacy support.<BR>\r
+ # FALSE - Does not turn off usb legacy support.<BR>\r
+ # @Prompt Turn off USB legacy support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdTurnOffUsbLegacySupport|FALSE|BOOLEAN|0x00010047\r
\r
- ## If TRUE, HiiImageProtocol will be installed.\r
- # FALSE is for size reduction.\r
+ ## Indicates if HiiImageProtocol will be installed.\r
+ # FALSE is for size reduction.<BR><BR>\r
+ # TRUE - Installs HiiImageProtocol.<BR>\r
+ # FALSE - Does not install HiiImageProtocol.<BR>\r
+ # @Prompt Enable HII image support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSupportHiiImageProtocol|TRUE|BOOLEAN|0x00010100\r
\r
- ## If TRUE, USB KeyBoard Driver disables the default keyboard layout.\r
+ ## Indicates if USB KeyBoard Driver disables the default keyboard layout.\r
# The default keyboard layout serves as the backup when no keyboard layout can be retrieved\r
- # from HII database.\r
+ # from HII database.<BR><BR>\r
+ # TRUE - USB KeyBoard Driver will disable the default keyboard layout.<BR>\r
+ # FALSE - USB KeyBoard Driver will not disable the default keyboard layout.<BR>\r
+ # @Prompt Disable default keyboard layout in USB KeyBoard Driver.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200\r
\r
- ## If TRUE, Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
- # If TRUE, the PeiCore will handle the framework FvHob and install FvInfo PPI for it.\r
- # This is used to provide backward compatibility support to Framework HII and Framework FvHob.\r
+ ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.<BR><BR>\r
+ # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
+ # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.<BR>\r
+ # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.\r
+ # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.<BR>\r
+ # @Prompt Enable framework backward compatibility support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009\r
\r
- ## If TRUE, HelloWorld Application will print the verbose information.\r
- # This PCD is a sample to explain FeatureFlag PCD usage.\r
+ ## Indicates if HelloWorld Application will print the verbose information.\r
+ # This PCD is a sample to explain FeatureFlag PCD usage.<BR><BR>\r
+ # TRUE - HelloWorld Application will print the verbose information.<BR>\r
+ # FALSE - HelloWorld Application will not print the verbose information.<BR>\r
+ # @Prompt Enable HelloWorld print.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintEnable|TRUE|BOOLEAN|0x0001200a\r
\r
- ## If TRUE, FULL FTW protocol services (total six APIs) will be produced.\r
- # If FASLE, only FTW Write service is available.\r
+ ## Indicates if FULL FTW protocol services (total six APIs) will be produced.<BR><BR>\r
+ # TRUE - Produces FULL FTW protocol services (total six APIs).<BR>\r
+ # FALSE - Only FTW Write service is available.<BR>\r
+ # @Prompt Enable FULL FTW services.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFullFtwServiceEnable|TRUE|BOOLEAN|0x0001200b\r
\r
- ## If TRUE, DXE IPL must support the UEFI decompression algorithm.\r
- # If FALSE, DXE IPL will not support UEFI decompression to save space.\r
+ ## Indicates if DXE IPL supports the UEFI decompression algorithm.<BR><BR>\r
+ # TRUE - DXE IPL will support UEFI decompression.<BR>\r
+ # FALSE - DXE IPL will not support UEFI decompression to save space.<BR>\r
+ # @Prompt Enable UEFI decompression support in DXE IPL.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSupportUefiDecompress|TRUE|BOOLEAN|0x0001200c\r
\r
- ## This PCD specifies whether PciBus supports the hot plug device.\r
+ ## Indicates if PciBus driver supports the hot plug device.<BR><BR>\r
+ # TRUE - PciBus driver supports the hot plug device.<BR>\r
+ # FALSE - PciBus driver doesn't support the hot plug device.<BR>\r
+ # @Prompt Enable PciBus hot plug device support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBusHotplugDeviceSupport|TRUE|BOOLEAN|0x0001003d\r
\r
- ## This PCD specifies whether the PCI bus driver probes non-standard, \r
- # such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.\r
+ ## Indicates if the PciBus driver probes non-standard, such as 2K/1K/512, granularity for PCI to PCI bridge I/O window.<BR><BR>\r
+ # TRUE - PciBus driver probes non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
+ # FALSE - PciBus driver doesn't probe non-standard granularity for PCI to PCI bridge I/O window.<BR>\r
+ # @Prompt Enable PCI bridge IO alignment probe.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e\r
- ## This PCD specifies whether StatusCode is reported via Serial port.\r
+\r
+ ## Indicates if StatusCode is reported via Serial port.<BR><BR>\r
+ # TRUE - Reports StatusCode via Serial port.<BR>\r
+ # FALSE - Does not report StatusCode via Serial port.<BR>\r
+ # @Prompt Enable StatusCode via Serial port.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022\r
\r
- ## This PCD specifies whether StatusCode is stored in memory.\r
- # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.\r
+ ## Indicates if StatusCode is stored in memory.\r
+ # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.<BR><BR>\r
+ # TRUE - Stores StatusCode in memory.<BR>\r
+ # FALSE - Does not store StatusCode in memory.<BR>\r
+ # @Prompt Enable StatusCode via memory.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023\r
\r
- ## This PCD specifies whether Peiphase StatusCode is replayed in DxePhase.\r
+ ## Indicates if PEI phase StatusCode will be replayed in DXE phase.<BR><BR>\r
+ # TRUE - Replays PEI phase StatusCode in DXE phased.<BR>\r
+ # FALSE - Does not replay PEI phase StatusCode in DXE phase.<BR>\r
+ # @Prompt Enable PEI StatusCode replay in DXE phase\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeReplayIn|FALSE|BOOLEAN|0x0001002d\r
\r
- ## This PCD specified whether ACPI SDT protocol is installed.\r
+ ## Indicates if ACPI SDT protocol will be installed.<BR><BR>\r
+ # TRUE - Installs ACPI SDT protocol.<BR>\r
+ # FALSE - Does not install ACPI SDT protocol.<BR>\r
+ # @Prompt Enable ACPI SDT support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdInstallAcpiSdtProtocol|FALSE|BOOLEAN|0x0001004d\r
\r
- ## If TRUE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
- # If FALSE, then unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are disabled.\r
- # The default value for this PCD is to disable support for unaligned PCI I/O Protocol requests.\r
+ ## Indicates if the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol are enabled.\r
+ # The default value for this PCD is false to disable support for unaligned PCI I/O Protocol requests.<BR><BR>\r
+ # TRUE - Enables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
+ # FALSE - Disables the unaligned I/O, MMIO, and PCI Configuration cycles through the PCI I/O Protocol.<BR>\r
+ # @Prompt Enable unaligned PCI I/O support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUnalignedPciIoEnable|FALSE|BOOLEAN|0x0001003e\r
\r
- ## This PCD specifies whether TEXT statement is always set to GrayOut statement in HII Form Browser.\r
- # If TRUE, TEXT statement will always be set to GrayOut.\r
- # If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.\r
+ ## Indicates if TEXT statement is always set to GrayOut statement in HII Form Browser.<BR><BR>\r
+ # TRUE - TEXT statement will always be set to GrayOut.<BR>\r
+ # FALSE - TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.<BR>\r
+ # @Prompt Always GrayOut TEXT statement.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f\r
- \r
- ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.\r
- # If TRUE, the unselectable menu will be set to GrayOut.\r
- # If FALSE, the menu will be show as normal menu entry even if it is not selectable.\r
+\r
+ ## Indicates if unselectable menu should be gray out in HII Form Browser.<BR><BR>\r
+ # TRUE - The unselectable menu will be set to GrayOut.<BR>\r
+ # FALSE - The menu will be show as normal menu entry even if it is not selectable.<BR>\r
+ # @Prompt GrayOut read only menu.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070\r
\r
- ## If TRUE, recovery from IDE disk will be supported.\r
+ ## Indicates if recovery from IDE disk will be supported.<BR><BR>\r
+ # TRUE - Supports recovery from IDE disk.<BR>\r
+ # FALSE - Does not support recovery from IDE disk.<BR>\r
+ # @Prompt Enable recovery on IDE disk.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060\r
\r
- ## If TRUE, recovery from FAT floppy disk will be supported.\r
+ ## Indicates if recovery from FAT floppy disk will be supported.<BR><BR>\r
+ # TRUE - Supports recovery from FAT floppy disk.<BR>\r
+ # FALSE - Does not support recovery from FAT floppy disk.<BR>\r
+ # @Prompt Enable recovery on FAT floppy disk.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatFloppyDisk|TRUE|BOOLEAN|0x00010061\r
\r
- ## If TRUE, recovery from data CD will be supported.\r
+ ## Indicates if recovery from data CD will be supported.<BR><BR>\r
+ # TRUE - Supports recovery from data CD.<BR>\r
+ # FALSE - Does not support recovery from data CD.<BR>\r
+ # @Prompt Enable recovery on data CD.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnDataCD|TRUE|BOOLEAN|0x00010062\r
\r
- ## If TRUE, recovery from FAT USB disk will be supported.\r
+ ## Indicates if recovery from FAT USB disk will be supported.<BR><BR>\r
+ # TRUE - Supports recovery from USB disk.<BR>\r
+ # FALSE - Does not support recovery from USB disk.<BR>\r
+ # @Prompt Enable recovery on FAT USB disk.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnFatUsbDisk|TRUE|BOOLEAN|0x00010063\r
\r
- ## If TRUE, S3 performance data will be supported in ACPI FPDT table.\r
+ ## Indicates if S3 performance data will be supported in ACPI FPDT table.<BR><BR>\r
+ # TRUE - S3 performance data will be supported in ACPI FPDT table.<BR>\r
+ # FALSE - S3 performance data will not be supported in ACPI FPDT table.<BR>\r
+ # @Prompt Enable S3 performance data support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwarePerformanceDataTableS3Support|TRUE|BOOLEAN|0x00010064\r
\r
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]\r
- ##\r
- # This feature flag specifies whether DxeIpl switches to long mode to enter DXE phase.\r
- # If it is TRUE, DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore;\r
- # otherwise, DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.\r
- # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
- # is built in firmware.\r
- #\r
+ ## Indicates if DxeIpl should switch to long mode to enter DXE phase.\r
+ # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore\r
+ # is built in firmware.<BR><BR>\r
+ # TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.<BR>\r
+ # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.<BR>\r
+ # @Prompt DxeIpl switch to long mode.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b\r
\r
- ##\r
- # This feature flag specifies whether DxeIpl should rebuild page tables. This flag only\r
- # makes sense in the case where the DxeIpl and the DxeCore are both X64.\r
- #\r
+ ## Indicates if DxeIpl should rebuild page tables. This flag only\r
+ # makes sense in the case where the DxeIpl and the DxeCore are both X64.<BR><BR>\r
+ # TRUE - DxeIpl will rebuild page tables.<BR>\r
+ # FALSE - DxeIpl will not rebuild page tables.<BR>\r
+ # @Prompt DxeIpl rebuild page tables.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplBuildPageTables|TRUE|BOOLEAN|0x0001003c\r
\r
[PcdsFixedAtBuild]\r
+ ## Flag of enabling/disabling the feature of Loading Module at Fixed Address.<BR><BR>\r
+ # 0xFFFFFFFFFFFFFFFF: Enable the feature as fixed offset to TOLM.<BR>\r
+ # 0: Disable the feature.<BR>\r
+ # Other Value: Enable the feature as fixed absolute address, and the value is the top memory address.<BR>\r
+ # @Prompt Enable LMFA feature.\r
+ # @Expression 0x80000001 | (gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable == 0xFFFFFFFFFFFFFFFF || gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable <= 0x0FFFFFFFFFFFFFFF)\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
+\r
+ ## Progress Code for OS Loader LoadImage start.<BR><BR>\r
+ # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000<BR>\r
+ # @Prompt Progress Code for OS Loader LoadImage start.\r
+ # @ValidList 0x80000003 | 0x03058000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
+\r
+ ## Progress Code for OS Loader StartImage start.<BR><BR>\r
+ # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001<BR>\r
+ # @Prompt Progress Code for OS Loader StartImage start.\r
+ # @ValidList 0x80000003 | 0x03058001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
+\r
+ ## Progress Code for S3 Suspend start.<BR><BR>\r
+ # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000<BR>\r
+ # @Prompt Progress Code for S3 Suspend start.\r
+ # @ValidList 0x80000003 | 0x03078000\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
+\r
+ ## Progress Code for S3 Suspend end.<BR><BR>\r
+ # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001<BR>\r
+ # @Prompt Progress Code for S3 Suspend end.\r
+ # @ValidList 0x80000003 | 0x03078001\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
+\r
+ ## Error Code for SetVariable failure.<BR><BR>\r
+ # EDKII_ERROR_CODE_SET_VARIABLE = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000002)) = 0x03058002<BR>\r
+ # @Prompt Error Code for SetVariable failure.\r
+ # @ValidList 0x80000006 | 0x03058002\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdErrorCodeSetVariable|0x03058002|UINT32|0x30001040\r
+\r
+[PcdsFixedAtBuild, PcdsPatchableInModule]\r
## Dynamic type PCD can be registered callback function for Pcd setting action.\r
- # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicate maximum number of callback function\r
+ # PcdMaxPeiPcdCallBackNumberPerPcdEntry indicates the maximum number of callback function\r
# for a dynamic PCD used in PEI phase.\r
+ # @Prompt Max PEI PCD callback number per PCD entry.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPcdCallBackNumberPerPcdEntry|0x08|UINT32|0x0001000f\r
\r
- ## VPD type PCD allow developer point an absoluted physical address PcdVpdBaseAddress\r
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress\r
# to store PCD value.\r
- #\r
+ # @Prompt VPD base address.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010\r
\r
## Maximum number of FV is supported by PeiCore's dispatching.\r
+ # @Prompt Maximum number of FV supported by PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030\r
\r
- ## Maximum PEIM count in every FV is supported by PeiCore's dispatching.\r
+ ## Maximum File count in every FV is supported by PeiCore's dispatching.\r
+ # PeiCore supported File type includes PEIM, Combined PEIM and FV.\r
+ # @Prompt Maximum File count per FV supported by PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031\r
\r
## Maximum stack size for PeiCore.\r
+ # @Prompt Maximum stack size for PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032\r
\r
## Maximum PPI count is supported by PeiCore's PPI database.\r
+ # @Prompt Maximum PPI count supported by PeiCore.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033\r
\r
- ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize\r
- # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
- # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
- # be reflushed through the manner of fault tolerant write.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
-\r
- ## The maximum size of single common variable, that is non-HwErr type varible.\r
+ ## The maximum size of a single non-HwErr type variable.\r
+ # @Prompt Maximum variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003\r
\r
- ## The maximum size of single hardware error record variable.\r
- # In IA32/X64 platforms, this value should be larger than 1KB.\r
- # In IA64 platforms, this value should be larger than 128KB.\r
+ ## The maximum size of a single authenticated variable.\r
+ # The value is 0 as default for compatibility that maximum authenticated variable size is specified by PcdMaxVariableSize.\r
+ # @Prompt Maximum authenticated variable size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009\r
+\r
+ ## The maximum size of single hardware error record variable.<BR><BR>\r
+ # In IA32/X64 platforms, this value should be larger than 1KB.<BR>\r
+ # In IA64 platforms, this value should be larger than 128KB.<BR>\r
+ # @Prompt Maximum HwErr variable size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxHardwareErrorVariableSize|0x8000|UINT32|0x30000004\r
\r
- ## The size of reserved HwErr variable space. Note that this value must be less than or equal to PcdFlashNvStorageVariableSize\r
+ ## The size of reserved HwErr variable space. Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
# In EdkII implementation, HwErr type variable is stored with common non-volatile variables in the same NV region.\r
- # so the platform integrator should ensure this value is less than or equal to PcdFlashNvStorageVariableSize.\r
+ # so the platform integrator should ensure this value is less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER)).\r
# this value is used to guarantee the space of HwErr type variable and not populated by common variable.\r
+ # @Prompt HwErr variable storage size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHwErrStorageSize|0x0000|UINT32|0x30000006\r
\r
- ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.\r
+ ## The size of maximum user NV variable space.<BR><BR>\r
+ # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
+ # If the value is 0, it means user variable share the same NV storage with system variable,\r
+ # this is designed to keep the compatibility for the platform that does not allocate special region for user variable.<BR>\r
+ # If the value is non-0, the below 4 types of variables will be regarded as System Variable after EndOfDxe, their property could be got by VarCheck protocol,\r
+ # otherwise the variable will be regarded as user variable.<BR>\r
+ # 1) UEFI defined variables (gEfiGlobalVariableGuid and gEfiImageSecurityDatabaseGuid(auth variable) variables at least).<BR>\r
+ # 2) Variables managed by Variable driver internally.<BR>\r
+ # 3) Variables need to be locked, they MUST be set by VariableLock protocol.<BR>\r
+ # 4) Important variables during platform boot, their property SHOULD be set by VarCheck protocol.<BR>\r
+ # The PCD is used to guarantee the space of system variable and not populated by user variable.<BR>\r
+ # @Prompt Maximum user NV variable space size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxUserNvVariableSpaceSize|0x00|UINT32|0x00000009\r
+\r
+ ## The size of NV variable space reserved at UEFI boottime.<BR><BR>\r
+ # Note that this value must be less than (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize).<BR>\r
+ # In EdkII implementation, variable driver can reserved some NV storage region for boottime settings.\r
+ # So at UEFI runtime, the variable service consumer can not exhaust full NV storage region.<BR>\r
+ # Then the common NV variable space size at boottime will be\r
+ # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize),<BR>\r
+ # and the common NV variable space size at runtime will be\r
+ # (PcdFlashNvStorageVariableSize - EFI_FIRMWARE_VOLUME_HEADER.HeaderLength - sizeof (VARIABLE_STORE_HEADER) - PcdHwErrStorageSize) - PcdBoottimeReservedNvVariableSpaceSize.<BR>\r
+ # @Prompt Boottime reserved NV variable space size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBoottimeReservedNvVariableSpaceSize|0x00|UINT32|0x30000007\r
+\r
+ ## Reclaim variable space at EndOfDxe.<BR><BR>\r
+ # The value is FALSE as default for compatibility that variable driver tries to reclaim variable space at ReadyToBoot event.<BR>\r
+ # If the value is set to TRUE, variable driver tries to reclaim variable space at EndOfDxe event.<BR>\r
+ # @Prompt Reclaim variable space at EndOfDxe.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdReclaimVariableSpaceAtEndOfDxe|FALSE|BOOLEAN|0x30000008\r
+\r
+ ## The size of volatile buffer. This buffer is used to store VOLATILE attribute variables.\r
+ # @Prompt Variable storage size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005\r
\r
- ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
- # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
- # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
- # be reflushed through the manner of fault tolerant write.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
-\r
- ## Size of the FTW working block range.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
-\r
- ## FFS filename to find the ACPI tables\r
+ ## FFS filename to find the ACPI tables.\r
+ # @Prompt FFS name of ACPI tables storage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016\r
\r
## FFS filename to find the capsule coalesce image.\r
+ # @Prompt FFS name of capsule coalesce image.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017\r
\r
- ## Flag of enabling/disabling the feature of Loading Module at Fixed Address \r
- # -1: Enable the feature as fixed offset to TOLM\r
- # 0: Disable the feature.\r
- # Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address \r
- gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015\r
-\r
- ## Smbios version\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055\r
-\r
- ## TFTP BlockSize. Initial value 0 means using default block size which is (MTU-IP_HEADER-UDP_HEADER-TFTP_HEADER)\r
- # to handle all link layers. If the value is non zero, the PCD value will be used as block size.\r
- #\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
-\r
- ## Progress Code for OS Loader LoadImage start.\r
- # PROGRESS_CODE_OS_LOADER_LOAD = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03058000\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderLoad|0x03058000|UINT32|0x30001030\r
-\r
- ## Progress Code for OS Loader StartImage start.\r
- # PROGRESS_CODE_OS_LOADER_START = (EFI_SOFTWARE_DXE_BS_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03058001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeOsLoaderStart|0x03058001|UINT32|0x30001031\r
-\r
- ## Progress Code for S3 Suspend start.\r
- # PROGRESS_CODE_S3_SUSPEND_START = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000000)) = 0x03078000\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendStart|0x03078000|UINT32|0x30001032\r
-\r
- ## Progress Code for S3 Suspend end.\r
- # PROGRESS_CODE_S3_SUSPEND_END = (EFI_SOFTWARE_SMM_DRIVER | (EFI_OEM_SPECIFIC | 0x00000001)) = 0x03078001\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdProgressCodeS3SuspendEnd|0x03078001|UINT32|0x30001033\r
-\r
-[PcdsFixedAtBuild,PcdsPatchableInModule]\r
- ## Maximun number of performance log entries during PEI phase.\r
+ ## Maximum number of performance log entries during PEI phase.\r
+ # @Prompt Maximum number of PEI performance log entries.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries|40|UINT8|0x0001002f\r
\r
- ## RTC Update Timeout Value\r
+ ## RTC Update Timeout Value(microsecond).\r
+ # @Prompt RTC Update Timeout Value.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034\r
\r
- ## If TRUE, then 16550 serial port registers are in MMIO space. \r
- # If FALSE, then 16550 serial port registers are in I/O space. Default value.\r
+ ## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.<BR><BR>\r
+ # TRUE - 16550 serial port registers are in MMIO space.<BR>\r
+ # FALSE - 16550 serial port registers are in I/O space.<BR>\r
+ # @Prompt Serial port registers use MMIO.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000\r
- \r
- ## If TRUE, then the 16550 serial port hardware flow control is enabled.\r
- # If FALSE, then the 16550 serial port hardware flow control is disabled. Default value.\r
+\r
+ ## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.<BR><BR>\r
+ # TRUE - 16550 serial port hardware flow control will be enabled.<BR>\r
+ # FALSE - 16550 serial port hardware flow control will be disabled.<BR>\r
+ # @Prompt Enable serial port hardware flow control.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseHardwareFlowControl|FALSE|BOOLEAN|0x00020001\r
\r
- ## If TRUE, then 16550 serial Tx operations will block if DSR is not asserted (no cable).\r
- # If FALSE, then the 16550 serial Tx operations will not be blocked if DSR is not asserted. Default value.\r
- # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.\r
+ ## Indicates if the 16550 serial Tx operations will be blocked if DSR is not asserted (no cable). Default is FALSE.\r
+ # This PCD is ignored if PcdSerialUseHardwareFlowControl is FALSE.<BR><BR>\r
+ # TRUE - 16550 serial Tx operations will be blocked if DSR is not asserted.<BR>\r
+ # FALSE - 16550 serial Tx operations will not be blocked if DSR is not asserted.<BR>\r
+ # @Prompt Enable serial port cable detetion.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialDetectCable|FALSE|BOOLEAN|0x00020006\r
\r
- ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
+ ## Base address of 16550 serial port registers in MMIO or I/O space. Default is 0x3F8.\r
+ # @Prompt Base address of serial port registers.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterBase|0x03F8|UINT64|0x00020002\r
\r
## Baud rate for the 16550 serial port. Default is 115200 baud.\r
+ # @Prompt Baud rate for serial port.\r
+ # @ValidList 0x80000001 | 921600, 460800, 230400, 115200, 57600, 38400, 19200, 9600, 7200, 4800, 3600, 2400, 2000, 1800, 1200, 600, 300, 150, 134, 110, 75, 50\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialBaudRate|115200|UINT32|0x00020003\r
\r
- ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits. \r
- # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits\r
- # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.\r
- # BIT5..BIT2 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity\r
- # BIT7..BIT6 - Reserved. Must be 0.\r
- #\r
- # Default is No Parity, 8 Data Bits, 1 Stop Bit.\r
+ ## Line Control Register (LCR) for the 16550 serial port. This encodes data bits, parity, and stop bits.<BR><BR>\r
+ # BIT1..BIT0 - Data bits. 00b = 5 bits, 01b = 6 bits, 10b = 7 bits, 11b = 8 bits<BR>\r
+ # BIT2 - Stop Bits. 0 = 1 stop bit. 1 = 1.5 stop bits if 5 data bits selected, otherwise 2 stop bits.<BR>\r
+ # BIT5..BIT3 - Parity. xx0b = No Parity, 001b = Odd Parity, 011b = Even Parity, 101b = Mark Parity, 111b=Stick Parity<BR>\r
+ # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
#\r
+ # Default is No Parity, 8 Data Bits, 1 Stop Bit.<BR>\r
+ # @Prompt Serial port Line Control settings.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl & 0xC0) == 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialLineControl|0x03|UINT8|0x00020004\r
\r
- ## FIFO Control Register (FCR) for the 16550 serial port. \r
- # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.\r
- # BIT1 - Clear receive FIFO. 1 = Clear FIFO.\r
- # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.\r
- # BIT4..BIT3 - Reserved. Must be 0.\r
- # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO\r
- # BIT7..BIT6 - Reserved. Must be 0.\r
- #\r
- # Default is to enable and clear all FIFOs.\r
+ ## FIFO Control Register (FCR) for the 16550 serial port.<BR><BR>\r
+ # BIT0 - FIFO Enable. 0 = Disable FIFOs. 1 = Enable FIFOs.<BR>\r
+ # BIT1 - Clear receive FIFO. 1 = Clear FIFO.<BR>\r
+ # BIT2 - Clear transmit FIFO. 1 = Clear FIFO.<BR>\r
+ # BIT4..BIT3 - Reserved. Must be 0.<BR>\r
+ # BIT5 - Enable 64-byte FIFO. 0 = Disable 64-byte FIFO. 1 = Enable 64-byte FIFO<BR>\r
+ # BIT7..BIT6 - Reserved. Must be 0.<BR>\r
#\r
+ # Default is to enable and clear all FIFOs.<BR>\r
+ # @Prompt Serial port FIFO Control settings.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005\r
\r
+ ## This setting can override the default TFTP block size. A value of 0 computes\r
+ # the default from MTU information. A non-zero value will be used as block size\r
+ # in bytes.\r
+ # @Prompt TFTP block size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026\r
+\r
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER\r
- # structure. The default value for this PCD is 0, which means that the DXE Core\r
+ # structure. The default value for this PCD is 0, which means that the DXE Core\r
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB\r
# boundary as close to the top of memory as feasible. If this PCD is set to a \r
- # value other than 0, then the DXE Core will first attempt to allocate the \r
+ # value other than 0, then the DXE Core will first attempt to allocate the\r
# EFI_SYSTEM_TABLE_POINTER structure on a 4MB boundary below the address specified\r
# by this PCD, and if that allocation fails, retry the allocation on a 4MB\r
# boundary as close to the top of memory as feasible.\r
- #\r
+ # @Prompt Maximum Efi System Table Pointer address.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxEfiSystemTablePointerAddress|0x0|UINT64|0x30001027\r
\r
+ ## Indicates if to shadow PEIM on S3 boot path after memory is ready.<BR><BR>\r
+ # TRUE - Shadow PEIM on S3 boot path after memory is ready.<BR>\r
+ # FALSE - Not shadow PEIM on S3 boot path after memory is ready.<BR>\r
+ # @Prompt Shadow Peim On S3 Boot. \r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnS3Boot|FALSE|BOOLEAN|0x30001028\r
+\r
+ ## Indicates if to shadow PEIM and PeiCore after memory is ready.<BR><BR>\r
+ # This PCD is used on other boot path except for S3 boot. \r
+ # TRUE - Shadow PEIM and PeiCore after memory is ready.<BR>\r
+ # FALSE - Not shadow PEIM after memory is ready.<BR>\r
+ # @Prompt Shadow Peim and PeiCore on boot\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029\r
+\r
+ ## The mask is used to control memory profile behavior.<BR><BR>\r
+ # BIT0 - Enable UEFI memory profile.<BR>\r
+ # BIT1 - Enable SMRAM profile.<BR>\r
+ # @Prompt Memory Profile Property.\r
+ # @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask & 0xFC) == 0\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfilePropertyMask|0x0|UINT8|0x30001041\r
+\r
+ ## This flag is to control which memory types of alloc info will be recorded by DxeCore & SmmCore.<BR><BR>\r
+ # For SmmCore, only EfiRuntimeServicesCode and EfiRuntimeServicesData are valid.<BR>\r
+ #\r
+ # Below is bit mask for this PCD: (Order is same as UEFI spec)<BR>\r
+ # EfiReservedMemoryType 0x0001<BR>\r
+ # EfiLoaderCode 0x0002<BR>\r
+ # EfiLoaderData 0x0004<BR>\r
+ # EfiBootServicesCode 0x0008<BR>\r
+ # EfiBootServicesData 0x0010<BR>\r
+ # EfiRuntimeServicesCode 0x0020<BR>\r
+ # EfiRuntimeServicesData 0x0040<BR>\r
+ # EfiConventionalMemory 0x0080<BR>\r
+ # EfiUnusableMemory 0x0100<BR>\r
+ # EfiACPIReclaimMemory 0x0200<BR>\r
+ # EfiACPIMemoryNVS 0x0400<BR>\r
+ # EfiMemoryMappedIO 0x0800<BR>\r
+ # EfiMemoryMappedIOPortSpace 0x1000<BR>\r
+ # EfiPalCode 0x2000<BR>\r
+ # EfiPersistentMemory 0x4000<BR>\r
+ # OEM Reserved 0x4000000000000000<BR>\r
+ # OS Reserved 0x8000000000000000<BR>\r
+ #\r
+ # e.g. Reserved+ACPINvs+ACPIReclaim+RuntimeCode+RuntimeData are needed, 0x661 should be used.<BR>\r
+ #\r
+ # @Prompt Memory profile memory type.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMemoryProfileMemoryType|0x0|UINT64|0x30001042\r
+\r
+ ## PCI Serial Device Info. It is an array of Device, Function, and Power Management\r
+ # information that describes the path that contains zero or more PCI to PCI briges \r
+ # followed by a PCI serial device. Each array entry is 4-bytes in length. The \r
+ # first byte is the PCI Device Number, then second byte is the PCI Function Number, \r
+ # and the last two bytes are the offset to the PCI power management capabilities \r
+ # register used to manage the D0-D3 states. If a PCI power management capabilities \r
+ # register is not present, then the last two bytes in the offset is set to 0. The \r
+ # array is terminated by an array entry with a PCI Device Number of 0xFF. For a \r
+ # non-PCI fixed address serial device, such as an ISA serial device, the value is 0xFF.\r
+ # @Prompt Pci Serial Device Info\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialPciDeviceInfo|{0xFF}|VOID*|0x00010067\r
+\r
+ ## Serial Port Extended Transmit FIFO Size. The default is 64 bytes. \r
+ # @Prompt Serial Port Extended Transmit FIFO Size in Bytes\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialExtendedTxFifoSize|64|UINT32|0x00010068\r
+ \r
+ ## This PCD points to the file name GUID of the BootManagerMenuApp\r
+ # Platform can customize the PCD to point to different application for Boot Manager Menu\r
+ # @Prompt Boot Manager Menu File\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b\r
+\r
+ ## This PCD points to the formset GUID of the driver health management form\r
+ # The form will be popped up by BDS core when there are Configuration Required driver health intances.\r
+ # Platform can customize the PCD to point to different formset.\r
+ # @Prompt Driver Health Management Form\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c\r
+\r
+ ## The number of bytes between registers in serial device. The default is 1 byte.\r
+ # @Prompt Serial Port Register Stride in Bytes\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterStride|1|UINT32|0x0001006d\r
+\r
+ ## This PCD to include the driver guid of VFR drivers for VarCheckHiiBin generation.<BR><BR>\r
+ # Default is gZeroGuid that means no VFR driver will be parsed for VarCheckHiiBin generation.<BR>\r
+ # If it is set to an all FFs GUID, it means all modules in all FVs will be parsed for VarCheckHiiBin generation.<BR>\r
+ # @Prompt Driver guid array of VFR drivers for VarCheckHiiBin generation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVarCheckVfrDriverGuidArray|{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x3000103A\r
+\r
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
- ## This PCD defines the Console output column and the default value is 25 according to UEFI spec.\r
- # This PCD could be set to 0 then console output could be at max column and max row.\r
+ ## This PCD defines the Console output row. The default value is 25 according to UEFI spec.\r
+ # This PCD could be set to 0 then console output would be at max column and max row.\r
+ # @Prompt Console output row.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutRow|25|UINT32|0x40000006\r
\r
- ## This PCD defines the Console output row and the default value is 80 according to UEFI spec.\r
- # This PCD could be set to 0 then console output could be at max column and max row.\r
+ ## This PCD defines the Console output column. The default value is 80 according to UEFI spec.\r
+ # This PCD could be set to 0 then console output would be at max column and max row.\r
+ # @Prompt Console output column.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConOutColumn|80|UINT32|0x40000007\r
\r
## This PCD defines the video horizontal resolution.\r
- # This PCD could be set to 0 then video resolution could be at highest resolution.\r
+ # If this PCD is set to 0 then video resolution would be at highest resolution.\r
+ # @Prompt Video horizontal resolution.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoHorizontalResolution|800|UINT32|0x40000009\r
\r
## This PCD defines the video vertical resolution.\r
- # This PCD could be set to 0 then video resolution could be at highest resolution.\r
+ # If this PCD is set to 0 then video resolution would be at highest resolution.\r
+ # @Prompt Video vertical resolution.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdVideoVerticalResolution|600|UINT32|0x4000000a\r
\r
-[PcdsFixedAtBuild, PcdsDynamic, PcdsDynamicEx]\r
- ## Base address of the NV variable range in flash device\r
+ # The 4 PCDs below are used to specify the video resolution and text mode of text setup.\r
+ # To make text setup work in this resolution, PcdVideoHorizontalResolution, PcdVideoVerticalResolution,\r
+ # PcdConOutColumn and PcdConOutRow should be created as PcdsDynamic or PcdsDynamicEx in platform DSC file.\r
+ # Then BDS setup will update these PCDs defined in MdeModulePkg.dec and reconnect console drivers\r
+ # (GraphicsConsole, Terminal, Consplitter) to make the video resolution and text mode work\r
+ # for text setup.\r
+\r
+ ## Specify the video horizontal resolution of text setup.\r
+ # @Prompt Video Horizontal Resolution of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoHorizontalResolution|800|UINT32|0x4000000b\r
+\r
+ ## Specify the video vertical resolution of text setup.\r
+ # @Prompt Video Vertical Resolution of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupVideoVerticalResolution|600|UINT32|0x4000000c\r
+\r
+ ## Specify the console output column of text setup.\r
+ # @Prompt Console Output Column of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutColumn|80|UINT32|0x4000000d\r
+\r
+ ## Specify the console output row of text setup.\r
+ # @Prompt Console Output Row of Text Setup\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e\r
+\r
+[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
+ ## UART clock frequency is for the baud rate configuration.\r
+ # @Prompt Serial Port Clock Rate.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialClockRate|1843200|UINT32|0x00010066\r
+\r
+ ## This PCD points to the front page formset GUID\r
+ # Compare the FormsetGuid or ClassGuid with this PCD value can detect whether in front page\r
+ # @Prompt Front Page Formset.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFrontPageFormSetGuid|{ 0xbc, 0x30, 0x0c, 0x9e,0x06, 0x3f, 0xa6, 0x4b, 0x82, 0x88, 0x9, 0x17, 0x9b, 0x85, 0x5d, 0xbe }|VOID*|0x0001006e\r
+\r
+ ## Base address of the NV variable range in flash device.\r
+ # @Prompt Base address of flash NV variable range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001\r
\r
+ ## Size of the NV variable range. Note that this value should less than or equal to PcdFlashNvStorageFtwSpareSize.\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
+ # @Prompt Size of flash NV variable range.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize|0x0|UINT32|0x30000002\r
+\r
## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
+ # @Prompt Base address of flash FTW spare block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013\r
\r
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.\r
+ # The root cause is that variable driver will use FTW protocol to reclaim variable region.\r
+ # If the length of variable region is larger than FTW spare size, it means the whole variable region can not\r
+ # be reflushed through the manner of fault tolerant write.\r
+ # @Prompt Size of flash FTW spare block range.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize|0x0|UINT32|0x30000014\r
+\r
## Base address of the FTW working block range in flash device.\r
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
+ # @Prompt Base address of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase|0x0|UINT32|0x30000010\r
\r
- ## 64-bit Base address of the NV variable range in flash device\r
+ ## Size of the FTW working block range.\r
+ # If the value is less than one block size, the work space range should not span blocks.\r
+ # If the value is larger than one block size, it should be block size aligned.\r
+ # @Prompt Size of flash FTW working block range.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize|0x0|UINT32|0x30000011\r
+\r
+ ## 64-bit Base address of the NV variable range in flash device.\r
+ # @Prompt 64-bit Base address of flash NV variable range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001\r
\r
## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.\r
+ # @Prompt 64-bit Base address of flash FTW spare block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013\r
\r
## 64-bit Base address of the FTW working block range in flash device.\r
+ # If PcdFlashNvStorageFtwWorkingSize is larger than one block size, this value should be block size aligned.\r
+ # @Prompt 64-bit Base address of flash FTW working block range.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010\r
\r
- ## This PCD defines the print string.\r
- # This PCD is a sample to explain String typed PCD usage.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
-\r
- ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store\r
- # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
+ ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.\r
+ # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.\r
+ # @Prompt Reserved memory range for EMU variable NV storage.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008\r
\r
- ## This PCD specifies whether the Single Root I/O virtualization support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
-\r
- ## Single root I/O virtualization virtual function memory BAR alignment\r
- # BITN set indicates 2 of n+12 power\r
- # BIT0 set indicates 4KB alignment\r
- # BIT1 set indicates 8KB alignment\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
-\r
- ## This PCD specifies whether the Alternative Routing-ID support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
-\r
- ## This PCD specifies whether the Multi Root I/O virtualization support.\r
- gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
-\r
-[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD defines the times to print hello world string.\r
- # This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.\r
+ # This PCD is a sample to explain UINT32 PCD usage.\r
+ # @Prompt HellowWorld print times.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005\r
\r
- ## Indicate the max size of the capsule image with reset flag that the platform can support.\r
+ ## This PCD defines the HelloWorld print string.\r
+ # This PCD is a sample to explain String typed PCD usage.\r
+ # @Prompt HelloWorld print string.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintString|L"UEFI Hello World!\n"|VOID*|0x40000004\r
+\r
+ ## Indicates the maximum size of the capsule image with a reset flag that the platform can support.\r
# The default max size is 100MB (0x6400000) for more than one large capsule images.\r
+ # @Prompt Max size of populated capsule.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizePopulateCapsule|0x6400000|UINT32|0x0001001e\r
\r
- ## Indicate the max size of the capsule image without reset flag that the platform can support.\r
+ ## Indicates the maximum size of the capsule image without a reset flag that the platform can support.\r
# The default max size is 10MB (0xa00000) for the casule image without reset flag setting.\r
+ # @Prompt Max size of non-populated capsule.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxSizeNonPopulateCapsule|0xa00000|UINT32|0x0001001f\r
\r
- ## Null-terminated Unicode string of the firmware vendor name that is default name filled into the EFI System Table\r
+ ## Null-terminated Unicode string of the firmware vendor name that is the default name filled into the EFI System Table.\r
+ # @Prompt Firmware vendor.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVendor|L"EDK II"|VOID*|0x00010050\r
\r
- ## Firmware revision that is default value filled into the EFI System Table\r
+ ## Firmware revision that is the default revision filled into the EFI System Table.\r
+ # @Prompt Firmware revision.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareRevision|0x00010000|UINT32|0x00010051\r
\r
- ## Null-terminated Unicode string that described the firmware version\r
+ ## Null-terminated Unicode string that describes the firmware version.\r
+ # @Prompt Firmware version string.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareVersionString|L""|VOID*|0x00010052\r
\r
- ## Null-terminated Unicode string that contains the date the formware was released\r
+ ## Null-terminated Unicode string that contains the date the firmware was released\r
+ # @Prompt Firmware release data string.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdFirmwareReleaseDateString|L""|VOID*|0x00010053\r
\r
- ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true\r
- # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.\r
- # The default value in PeiPhase is 1 KBytes.\r
- # The default value in DxePhase is 128 KBytes.\r
+ ## PcdStatusCodeMemorySize is used when PcdStatusCodeUseMemory is set to true.\r
+ # (PcdStatusCodeMemorySize * KBytes) is the total taken memory size.<BR><BR>\r
+ # The default value in PeiPhase is 1 KBytes.<BR>\r
+ # The default value in DxePhase is 128 KBytes.<BR>\r
+ # @Prompt StatusCode memory size.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeMemorySize|1|UINT16|0x00010054\r
\r
- ## This PCD specifies whether to reset system when memory type information changes.\r
+ ## Indicates if to reset system when memory type information changes.<BR><BR>\r
+ # TRUE - Resets system when memory type information changes.<BR>\r
+ # FALSE - Does not reset system when memory type information changes.<BR>\r
+ # @Prompt Reset on memory type information change.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056\r
\r
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.\r
- # Only following values defined in UEFI specification are valid:\r
- # 0x00 (EFI_BLACK)\r
- # 0x01 (EFI_BLUE)\r
- # 0x02 (EFI_GREEN)\r
- # 0x03 (EFI_CYAN)\r
- # 0x04 (EFI_RED)\r
- # 0x05 (EFI_MAGENTA)\r
- # 0x06 (EFI_BROWN)\r
- # 0x07 (EFI_LIGHTGRAY)\r
- # 0x08 (EFI_DARKGRAY) \r
- # 0x09 (EFI_LIGHTBLUE)\r
- # 0x0A (EFI_LIGHTGREEN)\r
- # 0x0B (EFI_LIGHTCYAN)\r
- # 0x0C (EFI_LIGHTRED)\r
- # 0x0D (EFI_LIGHTMAGENTA)\r
- # 0x0E (EFI_YELLOW)\r
- # 0x0F (EFI_WHITE)\r
+ # Only following values defined in UEFI specification are valid:<BR><BR>\r
+ # 0x00 (EFI_BLACK)<BR>\r
+ # 0x01 (EFI_BLUE)<BR>\r
+ # 0x02 (EFI_GREEN)<BR>\r
+ # 0x03 (EFI_CYAN)<BR>\r
+ # 0x04 (EFI_RED)<BR>\r
+ # 0x05 (EFI_MAGENTA)<BR>\r
+ # 0x06 (EFI_BROWN)<BR>\r
+ # 0x07 (EFI_LIGHTGRAY)<BR>\r
+ # 0x08 (EFI_DARKGRAY)<BR>\r
+ # 0x09 (EFI_LIGHTBLUE)<BR>\r
+ # 0x0A (EFI_LIGHTGREEN)<BR>\r
+ # 0x0B (EFI_LIGHTCYAN)<BR>\r
+ # 0x0C (EFI_LIGHTRED)<BR>\r
+ # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
+ # 0x0E (EFI_YELLOW)<BR>\r
+ # 0x0F (EFI_WHITE)<BR>\r
+ # @Prompt Foreground color for browser subtile.\r
+ # @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserSubtitleTextColor|0x01|UINT8|0x00010057\r
\r
## Specify the foreground color for prompt and Question value text in HII Form Browser. The default value is EFI_BLACK.\r
- # Only following values defined in UEFI specification are valid:\r
- # 0x00 (EFI_BLACK)\r
- # 0x01 (EFI_BLUE)\r
- # 0x02 (EFI_GREEN)\r
- # 0x03 (EFI_CYAN)\r
- # 0x04 (EFI_RED)\r
- # 0x05 (EFI_MAGENTA)\r
- # 0x06 (EFI_BROWN)\r
- # 0x07 (EFI_LIGHTGRAY)\r
- # 0x08 (EFI_DARKGRAY) \r
- # 0x09 (EFI_LIGHTBLUE)\r
- # 0x0A (EFI_LIGHTGREEN)\r
- # 0x0B (EFI_LIGHTCYAN)\r
- # 0x0C (EFI_LIGHTRED)\r
- # 0x0D (EFI_LIGHTMAGENTA)\r
- # 0x0E (EFI_YELLOW)\r
- # 0x0F (EFI_WHITE)\r
+ # Only following values defined in UEFI specification are valid:<BR><BR>\r
+ # 0x00 (EFI_BLACK)<BR>\r
+ # 0x01 (EFI_BLUE)<BR>\r
+ # 0x02 (EFI_GREEN)<BR>\r
+ # 0x03 (EFI_CYAN)<BR>\r
+ # 0x04 (EFI_RED)<BR>\r
+ # 0x05 (EFI_MAGENTA)<BR>\r
+ # 0x06 (EFI_BROWN)<BR>\r
+ # 0x07 (EFI_LIGHTGRAY)<BR>\r
+ # 0x08 (EFI_DARKGRAY)<BR>\r
+ # 0x09 (EFI_LIGHTBLUE)<BR>\r
+ # 0x0A (EFI_LIGHTGREEN)<BR>\r
+ # 0x0B (EFI_LIGHTCYAN)<BR>\r
+ # 0x0C (EFI_LIGHTRED)<BR>\r
+ # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
+ # 0x0E (EFI_YELLOW)<BR>\r
+ # 0x0F (EFI_WHITE)<BR>\r
+ # @Prompt Foreground color for browser field.\r
+ # @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextColor|0x00|UINT8|0x00010058\r
\r
## Specify the foreground color for highlighted prompt and Question value text in HII Form Browser.\r
- # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:\r
- # 0x00 (EFI_BLACK)\r
- # 0x01 (EFI_BLUE)\r
- # 0x02 (EFI_GREEN)\r
- # 0x03 (EFI_CYAN)\r
- # 0x04 (EFI_RED)\r
- # 0x05 (EFI_MAGENTA)\r
- # 0x06 (EFI_BROWN)\r
- # 0x07 (EFI_LIGHTGRAY)\r
- # 0x08 (EFI_DARKGRAY) \r
- # 0x09 (EFI_LIGHTBLUE)\r
- # 0x0A (EFI_LIGHTGREEN)\r
- # 0x0B (EFI_LIGHTCYAN)\r
- # 0x0C (EFI_LIGHTRED)\r
- # 0x0D (EFI_LIGHTMAGENTA)\r
- # 0x0E (EFI_YELLOW)\r
- # 0x0F (EFI_WHITE)\r
+ # The default value is EFI_LIGHTGRAY. Only following values defined in UEFI specification are valid:<BR><BR>\r
+ # 0x00 (EFI_BLACK)<BR>\r
+ # 0x01 (EFI_BLUE)<BR>\r
+ # 0x02 (EFI_GREEN)<BR>\r
+ # 0x03 (EFI_CYAN)<BR>\r
+ # 0x04 (EFI_RED)<BR>\r
+ # 0x05 (EFI_MAGENTA)<BR>\r
+ # 0x06 (EFI_BROWN)<BR>\r
+ # 0x07 (EFI_LIGHTGRAY)<BR>\r
+ # 0x08 (EFI_DARKGRAY)<BR>\r
+ # 0x09 (EFI_LIGHTBLUE)<BR>\r
+ # 0x0A (EFI_LIGHTGREEN)<BR>\r
+ # 0x0B (EFI_LIGHTCYAN)<BR>\r
+ # 0x0C (EFI_LIGHTRED)<BR>\r
+ # 0x0D (EFI_LIGHTMAGENTA)<BR>\r
+ # 0x0E (EFI_YELLOW)<BR>\r
+ # 0x0F (EFI_WHITE)<BR>\r
+ # @Prompt Foreground color for highlighted browser field.\r
+ # @ValidRange 0x80000004 | 0x00 - 0x0F\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldTextHighlightColor|0x07|UINT8|0x00010059\r
\r
## Specify the background color for highlighted prompt and Question value text in HII Form Browser.\r
- # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:\r
- # 0x00 (EFI_BACKGROUND_BLACK)\r
- # 0x10 (EFI_BACKGROUND_BLUE)\r
- # 0x20 (EFI_BACKGROUND_GREEN)\r
- # 0x30 (EFI_BACKGROUND_CYAN)\r
- # 0x40 (EFI_BACKGROUND_RED)\r
- # 0x50 (EFI_BACKGROUND_MAGENTA)\r
- # 0x60 (EFI_BACKGROUND_BROWN)\r
- # 0x70 (EFI_BACKGROUND_LIGHTGRAY)\r
+ # The default value is EFI_BACKGROUND_BLACK. Only following values defined in UEFI specification are valid:<BR><BR>\r
+ # 0x00 (EFI_BACKGROUND_BLACK)<BR>\r
+ # 0x10 (EFI_BACKGROUND_BLUE)<BR>\r
+ # 0x20 (EFI_BACKGROUND_GREEN)<BR>\r
+ # 0x30 (EFI_BACKGROUND_CYAN)<BR>\r
+ # 0x40 (EFI_BACKGROUND_RED)<BR>\r
+ # 0x50 (EFI_BACKGROUND_MAGENTA)<BR>\r
+ # 0x60 (EFI_BACKGROUND_BROWN)<BR>\r
+ # 0x70 (EFI_BACKGROUND_LIGHTGRAY)<BR>\r
+ # @Prompt Background color for highlighted browser field.\r
+ # @ValidList 0x80000005 | 0x00, 0x10, 0x20, 0x30, 0x40, 0x50, 0x60, 0x70\r
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserFieldBackgroundHighlightColor|0x00|UINT8|0x0001005A\r
\r
## Time in second to delay for SATA devices to spin-up for recovery.\r
+ # @Prompt SATA spin-up delay time in second for recovery path.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdSataSpinUpDelayInSecForRecoveryPath|15|UINT16|0x0001005B\r
\r
- ## The PCD is used to specify memory size with page number for a pre-allocated ACPI NVS memory to hold\r
- # runtime created S3 boot script entries. The default page number is 2. When changing the value of this\r
- # PCD, the platform developer should make sure the memory size is large enough to hold the S3 boot\r
- # script node created in runtime phase.\r
+ ## This PCD is used to specify memory size with page number for a pre-allocated ACPI reserved memory\r
+ # to hold runtime(after SmmReadyToLock) created S3 boot script entries. The default page number is 2.\r
+ # When changing the value of this PCD, the platform developer should make sure the memory size is\r
+ # large enough to hold the S3 boot script node created in runtime(after SmmReadyToLock) phase.\r
+ # @Prompt Reserved page number for S3 Boot Script Runtime Table.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptRuntimeTableReservePageNumber|0x2|UINT16|0x0001005C\r
\r
## The PCD is used to specify the stack size when capsule IA32 PEI transfers to long mode in PEI phase.\r
- # The default size 32K. When changing the value of this PCD, the platform developer should\r
- # make sure the memory size is large enough to meet capsule PEI requiremnt in capsule update path.\r
+ # The default size is 32K. When changing the value of this PCD, the platform developer should\r
+ # make sure the memory size is large enough to meet capsule PEI requirement in capsule update path.\r
+ # @Prompt Stack size for CapsulePei transfer to long mode.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsulePeiLongModeStackSize|0x8000|UINT32|0x0001005D\r
\r
- ## This PCD specifies whether 1G page table is enabled.\r
+ ## Indicates if 1G page table will be enabled.<BR><BR>\r
+ # TRUE - 1G page table will be enabled.<BR>\r
+ # FALSE - 1G page table will not be enabled.<BR>\r
+ # @Prompt Enable 1G page table support.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdUse1GPageTable|FALSE|BOOLEAN|0x0001005E\r
\r
- ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for \r
- # the extension FPDT boot records got after ReadyToBoot and before ExitBootService.\r
+ ## Indicates if the Single Root I/O virtualization is supported.<BR><BR>\r
+ # TRUE - Single Root I/O virtualization is supported.<BR>\r
+ # FALSE - Single Root I/O virtualization is not supported.<BR>\r
+ # @Prompt Enable SRIOV support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSupport|TRUE|BOOLEAN|0x10000044\r
+\r
+ ## Indicates if the Alternative Routing-ID is supported.<BR><BR>\r
+ # TRUE - Alternative Routing-ID is supported.<BR>\r
+ # FALSE - Alternative Routing-ID is not supported.<BR>\r
+ # @Prompt Enable ARI support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAriSupport|TRUE|BOOLEAN|0x10000045\r
+\r
+ ## Indicates if the Multi Root I/O virtualization is supported.<BR><BR>\r
+ # TRUE - Multi Root I/O virtualization is supported.<BR>\r
+ # FALSE - Multi Root I/O virtualization is not supported.<BR>\r
+ # @Prompt Enable MRIOV support.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046\r
+\r
+ ## Single root I/O virtualization virtual function memory BAR alignment.<BR><BR>\r
+ # BITN set indicates 2 of n+12 power<BR>\r
+ # BIT0 set indicates 4KB alignment<BR>\r
+ # BIT1 set indicates 8KB alignment<BR>\r
+ # @Prompt SRIOV system page size.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047\r
+\r
+ ## SMBIOS version.\r
+ # @Prompt SMBIOS version.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0300|UINT16|0x00010055\r
+\r
+ ## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
+ # @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A\r
+\r
+ ## SMBIOS produce method.\r
+ # BIT0 set indicates 32-bit entry point and table are produced.<BR>\r
+ # BIT1 set indicates 64-bit entry point and table are produced.<BR>\r
+ # @Prompt The policy to produce SMBIOS entry point and table.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069\r
+\r
+ ## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for\r
+ # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.\r
+ # @Prompt Pad size for extension FPDT boot records.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F\r
\r
- ## This PCD specifies whether ConIn device are connected on demand. If TRUE, ConIn\r
- # device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
- # by Consplitter should be called before any real key read operation.\r
+ ## Indicates if ConIn device are connected on demand.<BR><BR>\r
+ # TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced\r
+ # by Consplitter should be called before any real key read operation.<BR>\r
+ # FALSE - ConIn device may be connected normally during BDS.<BR>\r
+ # @Prompt ConIn connect on demand.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdConInConnectOnDemand|FALSE|BOOLEAN|0x10000060\r
\r
- ## This PCD specified whether the S.M.A.R.T feature of attached ATA hard disks are enabled.\r
+ ## Indicates if the S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR><BR>\r
+ # TRUE - S.M.A.R.T feature of attached ATA hard disks will be enabled.<BR>\r
+ # FALSE - S.M.A.R.T feature of attached ATA hard disks will be default status.<BR>\r
+ # @Prompt Enable ATA S.M.A.R.T feature.\r
gEfiMdeModulePkgTokenSpaceGuid.PcdAtaSmartEnable|TRUE|BOOLEAN|0x00010065\r
\r
+ ## Indicates if full PCI enumeration is disabled.<BR><BR>\r
+ # TRUE - Full PCI enumeration is disabled.<BR>\r
+ # FALSE - Full PCI enumeration is not disabled.<BR>\r
+ # @Prompt Disable full PCI enumeration.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPciDisableBusEnumeration|FALSE|BOOLEAN|0x10000048\r
+\r
+ ## Disk I/O - Number of Data Buffer block.\r
+ # Define the size in block of the pre-allocated buffer. It provide better\r
+ # performance for large Disk I/O requests.\r
+ # @Prompt Disk I/O - Number of Data Buffer block.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdDiskIoDataBufferBlockNum|64|UINT32|0x30001039\r
+\r
+ ## This PCD specifies the PCI-based UFS host controller mmio base address.\r
+ # Define the mmio base address of the pci-based UFS host controller. If there are multiple UFS\r
+ # host controllers, their mmio base addresses are calculated one by one from this base address.\r
+ # @Prompt Mmio base address of pci-based UFS host controller.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUfsPciHostControllerMmioBase|0xd0000000|UINT32|0x10000061\r
+\r
+ ## Specify Max ESRT cache entry number supported for FMP instances\r
+ #\r
+ # @Prompt Max FMP ESRT entry number to be synced & cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxFmpEsrtCacheNum|32|UINT32|0x0000006b\r
+\r
+ ## Specify Max ESRT cache entry number supported for Non FMP instances\r
+ #\r
+ # @Prompt Max Non-FMP ESRT entry number to be cached in repository.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxNonFmpEsrtCacheNum|32|UINT32|0x0000006c\r
+\r
+ ## Specify of Capsule Flag defined by CapsuleGuid to request system reboot after capsule process\r
+ #\r
+ # @Prompt Flag to request system reboot after processing capsule.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d\r
+\r
+ ## Publish PropertiesTable or not.\r
+ #\r
+ # If this PCD is TRUE, DxeCore publishs PropertiesTable.\r
+ # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all\r
+ # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in\r
+ # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.\r
+ # If this PCD is FALSE, DxeCore does not publish PropertiesTable.\r
+ #\r
+ # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:\r
+ # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and\r
+ # use EfiRuntimeServicesData for runtime driver PE image header and other section.\r
+ # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.\r
+ # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.\r
+ # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.\r
+ #\r
+ # NOTE: Platform need gurantee this PCD is set correctly. Platform should set\r
+ # this PCD to be TURE if and only if all runtime driver has seperated Code/Data\r
+ # section. If PE code/data sections are merged, the result is unpredictable.\r
+ #\r
+ # @Prompt Publish UEFI PropertiesTable.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|TRUE|BOOLEAN|0x0000006e\r
+\r
+ ## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.\r
+ # @Prompt Default OEM ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034\r
+\r
+ ## Default OEM Table ID for ACPI table creation, it is "EDK2 ".\r
+ # @Prompt Default OEM Table ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemTableId|0x20202020324B4445|UINT64|0x30001035\r
+\r
+ ## Default OEM Revision for ACPI table creation.\r
+ # @Prompt Default OEM Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemRevision|0x00000002|UINT32|0x30001036\r
+\r
+ ## Default Creator ID for ACPI table creation.\r
+ # @Prompt Default Creator ID for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorId|0x20202020|UINT32|0x30001037\r
+\r
+ ## Default Creator Revision for ACPI table creation.\r
+ # @Prompt Default Creator Revision for ACPI table creation.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultCreatorRevision|0x01000013|UINT32|0x30001038\r
+\r
+ ## Indicates if to set NX for stack.<BR><BR>\r
+ # For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.<BR>\r
+ # For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require\r
+ # IA32 PAE is supported and Execute Disable Bit is available.<BR>\r
+ # TRUE - to set NX for stack.<BR>\r
+ # FALSE - Not to set NX for stack.<BR>\r
+ # @Prompt Set NX for stack.\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f\r
+\r
[PcdsPatchableInModule]\r
- ## Specify memory size with page number for PEI code when \r
- # the feature of Loading Module at Fixed Address is enabled\r
+ ## Specify memory size with page number for PEI code when\r
+ # Loading Module at Fixed Address feature is enabled.\r
+ # The value will be set by the build tool.\r
+ # @Prompt LMFA PEI code page number.\r
+ # @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressPeiCodePageNumber|0|UINT32|0x00000029\r
\r
- ## Specify memory size with page number for DXE boot time code when \r
- # the feature of Loading Module at Fixed Address is enabled\r
+ ## Specify memory size with page number for DXE boot time code when\r
+ # Loading Module at Fixed Address feature is enabled.\r
+ # The value will be set by the build tool.\r
+ # @Prompt LMFA DXE boot code page number.\r
+ # @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressBootTimeCodePageNumber|0|UINT32|0x0000002a\r
\r
- ## Specify memory size with page number for DXE runtime code when \r
- # the feature of Loading Module at Fixed Address is enabled\r
+ ## Specify memory size with page number for DXE runtime code when\r
+ # Loading Module at Fixed Address feature is enabled.\r
+ # The value will be set by the build tool.\r
+ # @Prompt LMFA DXE runtime code page number.\r
+ # @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressRuntimeCodePageNumber|0|UINT32|0x0000002b\r
\r
- ## Specify memory size with page number for SMM code when \r
- # the feature of Loading Module at Fixed Address is enabled\r
+ ## Specify memory size with page number for SMM code when\r
+ # Loading Module at Fixed Address feature is enabled.\r
+ # The value will be set by the build tool.\r
+ # @Prompt LMFA SMM code page number.\r
+ # @ValidList 0x80000001 | 0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadFixAddressSmmCodePageNumber|0|UINT32|0x0000002c\r
\r
[PcdsDynamic, PcdsDynamicEx]\r
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
+ # @Prompt S3 Boot Script Table Private Data pointer.\r
+ # @ValidList 0x80000001 | 0x0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000\r
\r
## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library\r
# instance which records the S3 boot script table start address, length, etc. To introduce this PCD is\r
# only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the\r
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.\r
+ # @Prompt S3 Boot Script Table Private Smm Data pointer.\r
+ # @ValidList 0x80000001 | 0x0\r
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001\r
\r
+ ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1 \r
+ # Virtual to Physical mapping according to the processor physical address bits.\r
+ # @Prompt Identify Mapping Page Table pointer.\r
+ # @ValidList 0x80000001 | 0x0\r
+ gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002\r
+\r
+[UserExtensions.TianoCore."ExtraFiles"]\r
+ MdeModulePkgExtra.uni\r
projects / mirror_edk2.git / blobdiff