--- /dev/null
+/*++\r
+\r
+Copyright (c) 2006, Intel Corporation \r
+All rights reserved. This program and the accompanying materials \r
+are licensed and made available under the terms and conditions of the BSD License \r
+which accompanies this distribution. The full text of the license may be found at \r
+http://opensource.org/licenses/bsd-license.php \r
+ \r
+THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS, \r
+WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED. \r
+\r
+Module Name:\r
+\r
+ EbcSupport.c\r
+\r
+Abstract:\r
+\r
+ This module contains EBC support routines that are customized based on\r
+ the target processor.\r
+\r
+--*/\r
+\r
+#include "EbcInt.h"\r
+#include "EbcExecute.h"\r
+\r
+//\r
+// NOTE: This is the stack size allocated for the interpreter\r
+// when it executes an EBC image. The requirements can change\r
+// based on whether or not a debugger is present, and other\r
+// platform-specific configurations.\r
+//\r
+#define VM_STACK_SIZE (1024 * 4)\r
+#define EBC_THUNK_SIZE 32\r
+\r
+#define STACK_REMAIN_SIZE (1024 * 4)\r
+VOID\r
+EbcLLCALLEX (\r
+ IN VM_CONTEXT *VmPtr,\r
+ IN UINTN FuncAddr,\r
+ IN UINTN NewStackPointer,\r
+ IN VOID *FramePtr,\r
+ IN UINT8 Size\r
+ )\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ This function is called to execute an EBC CALLEX instruction. \r
+ The function check the callee's content to see whether it is common native\r
+ code or a thunk to another piece of EBC code.\r
+ If the callee is common native code, use EbcLLCAllEXASM to manipulate,\r
+ otherwise, set the VM->IP to target EBC code directly to avoid another VM\r
+ be startup which cost time and stack space.\r
+ \r
+Arguments:\r
+\r
+ VmPtr - Pointer to a VM context.\r
+ FuncAddr - Callee's address\r
+ NewStackPointer - New stack pointer after the call\r
+ FramePtr - New frame pointer after the call\r
+ Size - The size of call instruction\r
+\r
+Returns:\r
+\r
+ None.\r
+ \r
+--*/\r
+{\r
+ UINTN IsThunk;\r
+ UINTN TargetEbcAddr;\r
+\r
+ IsThunk = 1;\r
+ TargetEbcAddr = 0;\r
+\r
+ //\r
+ // Processor specific code to check whether the callee is a thunk to EBC.\r
+ //\r
+ if (*((UINT8 *)FuncAddr) != 0xB8) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 1) != 0xBC) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 2) != 0x2E) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 3) != 0x11) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 4) != 0xCA) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 5) != 0xB8) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 10) != 0xB9) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 15) != 0xFF) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+ if (*((UINT8 *)FuncAddr + 16) != 0xE1) {\r
+ IsThunk = 0;\r
+ goto Action;\r
+ }\r
+\r
+ TargetEbcAddr = ((UINTN)(*((UINT8 *)FuncAddr + 9)) << 24) + ((UINTN)(*((UINT8 *)FuncAddr + 8)) << 16) +\r
+ ((UINTN)(*((UINT8 *)FuncAddr + 7)) << 8) + ((UINTN)(*((UINT8 *)FuncAddr + 6)));\r
+\r
+Action:\r
+ if (IsThunk == 1){\r
+ //\r
+ // The callee is a thunk to EBC, adjust the stack pointer down 16 bytes and\r
+ // put our return address and frame pointer on the VM stack.\r
+ // Then set the VM's IP to new EBC code.\r
+ //\r
+ VmPtr->R[0] -= 8;\r
+ VmWriteMemN (VmPtr, (UINTN) VmPtr->R[0], (UINTN) FramePtr);\r
+ VmPtr->FramePtr = (VOID *) (UINTN) VmPtr->R[0];\r
+ VmPtr->R[0] -= 8;\r
+ VmWriteMem64 (VmPtr, (UINTN) VmPtr->R[0], (UINT64) (UINTN) (VmPtr->Ip + Size));\r
+\r
+ VmPtr->Ip = (VMIP) (UINTN) TargetEbcAddr;\r
+ } else {\r
+ //\r
+ // The callee is not a thunk to EBC, call native code.\r
+ //\r
+ EbcLLCALLEXNative (FuncAddr, NewStackPointer, FramePtr);\r
+ \r
+ //\r
+ // Get return value and advance the IP.\r
+ //\r
+ VmPtr->R[7] = EbcLLGetReturnValue ();\r
+ VmPtr->Ip += Size;\r
+ }\r
+}\r
+\r
+STATIC\r
+UINT64\r
+EbcInterpret (\r
+ IN OUT UINTN Arg1,\r
+ IN OUT UINTN Arg2,\r
+ IN OUT UINTN Arg3,\r
+ IN OUT UINTN Arg4,\r
+ IN OUT UINTN Arg5,\r
+ IN OUT UINTN Arg6,\r
+ IN OUT UINTN Arg7,\r
+ IN OUT UINTN Arg8,\r
+ IN OUT UINTN Arg9,\r
+ IN OUT UINTN Arg10,\r
+ IN OUT UINTN Arg11,\r
+ IN OUT UINTN Arg12,\r
+ IN OUT UINTN Arg13,\r
+ IN OUT UINTN Arg14,\r
+ IN OUT UINTN Arg15,\r
+ IN OUT UINTN Arg16\r
+ )\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ Begin executing an EBC image. The address of the entry point is passed\r
+ in via a processor register, so we'll need to make a call to get the\r
+ value.\r
+ \r
+Arguments:\r
+\r
+ None. Since we're called from a fixed up thunk (which we want to keep\r
+ small), our only so-called argument is the EBC entry point passed in\r
+ to us in a processor register.\r
+\r
+Returns:\r
+\r
+ The value returned by the EBC application we're going to run.\r
+ \r
+--*/\r
+{\r
+ //\r
+ // Create a new VM context on the stack\r
+ //\r
+ VM_CONTEXT VmContext;\r
+ UINTN Addr;\r
+ EFI_STATUS Status;\r
+ UINTN StackIndex;\r
+\r
+ //\r
+ // Get the EBC entry point from the processor register.\r
+ //\r
+ Addr = EbcLLGetEbcEntryPoint ();\r
+\r
+ //\r
+ // Now clear out our context\r
+ //\r
+ ZeroMem ((VOID *) &VmContext, sizeof (VM_CONTEXT));\r
+\r
+ //\r
+ // Set the VM instruction pointer to the correct location in memory.\r
+ //\r
+ VmContext.Ip = (VMIP) Addr;\r
+ //\r
+ // Initialize the stack pointer for the EBC. Get the current system stack\r
+ // pointer and adjust it down by the max needed for the interpreter.\r
+ //\r
+\r
+ //\r
+ // Align the stack on a natural boundary\r
+ //\r
+\r
+ //\r
+ // Allocate stack pool\r
+ //\r
+ Status = GetEBCStack((EFI_HANDLE)-1, &VmContext.StackPool, &StackIndex);\r
+ if (EFI_ERROR(Status)) {\r
+ return Status;\r
+ }\r
+ VmContext.StackTop = (UINT8*)VmContext.StackPool + (STACK_REMAIN_SIZE);\r
+ VmContext.R[0] = (UINT64)(UINTN) ((UINT8*)VmContext.StackPool + STACK_POOL_SIZE);\r
+ VmContext.HighStackBottom = (UINTN)VmContext.R[0];\r
+ VmContext.R[0] &= ~(sizeof (UINTN) - 1);\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+\r
+ //\r
+ // Put a magic value in the stack gap, then adjust down again\r
+ //\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) VM_STACK_KEY_VALUE;\r
+ VmContext.StackMagicPtr = (UINTN *) (UINTN) VmContext.R[0];\r
+ VmContext.LowStackTop = (UINTN) VmContext.R[0];\r
+\r
+ //\r
+ // For IA32, this is where we say our return address is\r
+ //\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg16;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg15;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg14;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg13;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg12;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg11;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg10;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg9;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg8;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg7;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg6;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg5;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg4;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg3;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg2;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) Arg1;\r
+ VmContext.R[0] -= 16;\r
+ VmContext.StackRetAddr = (UINT64) VmContext.R[0];\r
+\r
+ //\r
+ // We need to keep track of where the EBC stack starts. This way, if the EBC\r
+ // accesses any stack variables above its initial stack setting, then we know\r
+ // it's accessing variables passed into it, which means the data is on the\r
+ // VM's stack.\r
+ // When we're called, on the stack (high to low) we have the parameters, the\r
+ // return address, then the saved ebp. Save the pointer to the return address.\r
+ // EBC code knows that's there, so should look above it for function parameters.\r
+ // The offset is the size of locals (VMContext + Addr + saved ebp).\r
+ // Note that the interpreter assumes there is a 16 bytes of return address on\r
+ // the stack too, so adjust accordingly.\r
+ // VmContext.HighStackBottom = (UINTN)(Addr + sizeof (VmContext) + sizeof (Addr));\r
+ //\r
+\r
+ //\r
+ // Begin executing the EBC code\r
+ //\r
+ EbcExecute (&VmContext);\r
+\r
+ //\r
+ // Return the value in R[7] unless there was an error\r
+ //\r
+ ReturnEBCStack(StackIndex);\r
+ return (UINT64) VmContext.R[7];\r
+}\r
+\r
+STATIC\r
+UINT64\r
+ExecuteEbcImageEntryPoint (\r
+ IN EFI_HANDLE ImageHandle,\r
+ IN EFI_SYSTEM_TABLE *SystemTable\r
+ )\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ Begin executing an EBC image. The address of the entry point is passed\r
+ in via a processor register, so we'll need to make a call to get the\r
+ value.\r
+ \r
+Arguments:\r
+\r
+ ImageHandle - image handle for the EBC application we're executing\r
+ SystemTable - standard system table passed into an driver's entry point\r
+\r
+Returns:\r
+\r
+ The value returned by the EBC application we're going to run.\r
+\r
+--*/\r
+{\r
+ //\r
+ // Create a new VM context on the stack\r
+ //\r
+ VM_CONTEXT VmContext;\r
+ UINTN Addr;\r
+ EFI_STATUS Status;\r
+ UINTN StackIndex;\r
+\r
+ //\r
+ // Get the EBC entry point from the processor register. Make sure you don't\r
+ // call any functions before this or you could mess up the register the\r
+ // entry point is passed in.\r
+ //\r
+ Addr = EbcLLGetEbcEntryPoint ();\r
+\r
+ //\r
+ // Print(L"*** Thunked into EBC entry point - ImageHandle = 0x%X\n", (UINTN)ImageHandle);\r
+ // Print(L"EBC entry point is 0x%X\n", (UINT32)(UINTN)Addr);\r
+ //\r
+ // Now clear out our context\r
+ //\r
+ ZeroMem ((VOID *) &VmContext, sizeof (VM_CONTEXT));\r
+\r
+ //\r
+ // Save the image handle so we can track the thunks created for this image\r
+ //\r
+ VmContext.ImageHandle = ImageHandle;\r
+ VmContext.SystemTable = SystemTable;\r
+\r
+ //\r
+ // Set the VM instruction pointer to the correct location in memory.\r
+ //\r
+ VmContext.Ip = (VMIP) Addr;\r
+\r
+ //\r
+ // Initialize the stack pointer for the EBC. Get the current system stack\r
+ // pointer and adjust it down by the max needed for the interpreter.\r
+ //\r
+\r
+ //\r
+ // Allocate stack pool\r
+ //\r
+ Status = GetEBCStack(ImageHandle, &VmContext.StackPool, &StackIndex);\r
+ if (EFI_ERROR(Status)) {\r
+ return Status;\r
+ }\r
+ VmContext.StackTop = (UINT8*)VmContext.StackPool + (STACK_REMAIN_SIZE);\r
+ VmContext.R[0] = (UINT64)(UINTN) ((UINT8*)VmContext.StackPool + STACK_POOL_SIZE);\r
+ VmContext.HighStackBottom = (UINTN)VmContext.R[0];\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ \r
+ //\r
+ // Put a magic value in the stack gap, then adjust down again\r
+ //\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) VM_STACK_KEY_VALUE;\r
+ VmContext.StackMagicPtr = (UINTN *) (UINTN) VmContext.R[0];\r
+\r
+ //\r
+ // Align the stack on a natural boundary\r
+ // VmContext.R[0] &= ~(sizeof(UINTN) - 1);\r
+ //\r
+ VmContext.LowStackTop = (UINTN) VmContext.R[0];\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) SystemTable;\r
+ VmContext.R[0] -= sizeof (UINTN);\r
+ *(UINTN *) (UINTN) (VmContext.R[0]) = (UINTN) ImageHandle;\r
+\r
+ VmContext.R[0] -= 16; \r
+ VmContext.StackRetAddr = (UINT64) VmContext.R[0];\r
+ //\r
+ // VM pushes 16-bytes for return address. Simulate that here.\r
+ //\r
+\r
+ //\r
+ // Begin executing the EBC code\r
+ //\r
+ EbcExecute (&VmContext);\r
+\r
+ //\r
+ // Return the value in R[7] unless there was an error\r
+ //\r
+ return (UINT64) VmContext.R[7];\r
+}\r
+\r
+EFI_STATUS\r
+EbcCreateThunks (\r
+ IN EFI_HANDLE ImageHandle,\r
+ IN VOID *EbcEntryPoint,\r
+ OUT VOID **Thunk,\r
+ IN UINT32 Flags\r
+ )\r
+/*++\r
+\r
+Routine Description:\r
+\r
+ Create an IA32 thunk for the given EBC entry point.\r
+ \r
+Arguments:\r
+\r
+ ImageHandle - Handle of image for which this thunk is being created\r
+ EbcEntryPoint - Address of the EBC code that the thunk is to call\r
+ Thunk - Returned thunk we create here\r
+\r
+Returns:\r
+\r
+ Standard EFI status.\r
+ \r
+--*/\r
+{\r
+ UINT8 *Ptr;\r
+ UINT8 *ThunkBase;\r
+ UINT32 I;\r
+ UINT32 Addr;\r
+ INT32 Size;\r
+ INT32 ThunkSize;\r
+\r
+ //\r
+ // Check alignment of pointer to EBC code\r
+ //\r
+ if ((UINT32) (UINTN) EbcEntryPoint & 0x01) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ Size = EBC_THUNK_SIZE;\r
+ ThunkSize = Size;\r
+\r
+ Ptr = AllocatePool (Size);\r
+\r
+ if (Ptr == NULL) {\r
+ return EFI_OUT_OF_RESOURCES;\r
+ }\r
+ //\r
+ // Print(L"Allocate TH: 0x%X\n", (UINT32)Ptr);\r
+ //\r
+ // Save the start address so we can add a pointer to it to a list later.\r
+ //\r
+ ThunkBase = Ptr;\r
+\r
+ //\r
+ // Give them the address of our buffer we're going to fix up\r
+ //\r
+ *Thunk = (VOID *) Ptr;\r
+\r
+ //\r
+ // Add a magic code here to help the VM recognize the thunk..\r
+ // mov eax, 0xca112ebc => B8 BC 2E 11 CA\r
+ //\r
+ *Ptr = 0xB8;\r
+ Ptr++;\r
+ Size--;\r
+ Addr = (UINT32) 0xCA112EBC;\r
+ for (I = 0; I < sizeof (Addr); I++) {\r
+ *Ptr = (UINT8) (UINTN) Addr;\r
+ Addr >>= 8;\r
+ Ptr++;\r
+ Size--;\r
+ }\r
+\r
+ //\r
+ // Add code bytes to load up a processor register with the EBC entry point.\r
+ // mov eax, 0xaa55aa55 => B8 55 AA 55 AA\r
+ // The first 8 bytes of the thunk entry is the address of the EBC\r
+ // entry point.\r
+ //\r
+ *Ptr = 0xB8;\r
+ Ptr++;\r
+ Size--;\r
+ Addr = (UINT32) EbcEntryPoint;\r
+ for (I = 0; I < sizeof (Addr); I++) {\r
+ *Ptr = (UINT8) (UINTN) Addr;\r
+ Addr >>= 8;\r
+ Ptr++;\r
+ Size--;\r
+ }\r
+ //\r
+ // Stick in a load of ecx with the address of appropriate VM function.\r
+ // mov ecx 12345678h => 0xB9 0x78 0x56 0x34 0x12\r
+ //\r
+ if (Flags & FLAG_THUNK_ENTRY_POINT) {\r
+ Addr = (UINT32) (UINTN) ExecuteEbcImageEntryPoint;\r
+ } else {\r
+ Addr = (UINT32) (UINTN) EbcInterpret;\r
+ }\r
+\r
+ //\r
+ // MOV ecx\r
+ //\r
+ *Ptr = 0xB9;\r
+ Ptr++;\r
+ Size--;\r
+ for (I = 0; I < sizeof (Addr); I++) {\r
+ *Ptr = (UINT8) Addr;\r
+ Addr >>= 8;\r
+ Ptr++;\r
+ Size--;\r
+ }\r
+ //\r
+ // Stick in jump opcode bytes for jmp ecx => 0xFF 0xE1\r
+ //\r
+ *Ptr = 0xFF;\r
+ Ptr++;\r
+ Size--;\r
+ *Ptr = 0xE1;\r
+ Size--;\r
+\r
+ //\r
+ // Double check that our defined size is ok (application error)\r
+ //\r
+ if (Size < 0) {\r
+ ASSERT (FALSE);\r
+ return EFI_BUFFER_TOO_SMALL;\r
+ }\r
+ //\r
+ // Add the thunk to the list for this image. Do this last since the add\r
+ // function flushes the cache for us.\r
+ //\r
+ EbcAddImageThunk (ImageHandle, (VOID *) ThunkBase, ThunkSize);\r
+\r
+ return EFI_SUCCESS;\r
+}\r
projects / mirror_edk2.git / blobdiff