This file provides a definition of the EFI IPv4 Configuration II\r
Protocol.\r
\r
-Copyright (c) 2015 - 2017, Intel Corporation. All rights reserved.<BR>\r
+Copyright (c) 2015 - 2018, Intel Corporation. All rights reserved.<BR>\r
This program and the accompanying materials\r
are licensed and made available under the terms and conditions of the BSD License\r
which accompanies this distribution. The full text of the license may be found at<BR>\r
///\r
typedef enum {\r
///\r
- /// The interface information of the communication device this EFI \r
- /// IPv4 Configuration II Protocol instance manages. This type of \r
- /// data is read only. The corresponding Data is of type \r
+ /// The interface information of the communication device this EFI\r
+ /// IPv4 Configuration II Protocol instance manages. This type of\r
+ /// data is read only. The corresponding Data is of type\r
/// EFI_IP4_CONFIG2_INTERFACE_INFO.\r
///\r
Ip4Config2DataTypeInterfaceInfo,\r
///\r
- /// The general configuration policy for the EFI IPv4 network stack \r
- /// running on the communication device this EFI IPv4 \r
- /// Configuration II Protocol instance manages. The policy will \r
- /// affect other configuration settings. The corresponding Data is of \r
+ /// The general configuration policy for the EFI IPv4 network stack\r
+ /// running on the communication device this EFI IPv4\r
+ /// Configuration II Protocol instance manages. The policy will\r
+ /// affect other configuration settings. The corresponding Data is of\r
/// type EFI_IP4_CONFIG2_POLICY.\r
///\r
Ip4Config2DataTypePolicy,\r
///\r
- /// The station addresses set manually for the EFI IPv4 network \r
- /// stack. It is only configurable when the policy is \r
- /// Ip4Config2PolicyStatic. The corresponding Data is of \r
- /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS. When DataSize \r
- /// is 0 and Data is NULL, the existing configuration is cleared \r
+ /// The station addresses set manually for the EFI IPv4 network\r
+ /// stack. It is only configurable when the policy is\r
+ /// Ip4Config2PolicyStatic. The corresponding Data is of\r
+ /// type EFI_IP4_CONFIG2_MANUAL_ADDRESS. When DataSize\r
+ /// is 0 and Data is NULL, the existing configuration is cleared\r
/// from the EFI IPv4 Configuration II Protocol instance.\r
///\r
Ip4Config2DataTypeManualAddress,\r
///\r
- /// The gateway addresses set manually for the EFI IPv4 network \r
- /// stack running on the communication device this EFI IPv4 \r
- /// Configuration II Protocol manages. It is not configurable when \r
- /// the policy is Ip4Config2PolicyDhcp. The gateway \r
- /// addresses must be unicast IPv4 addresses. The corresponding \r
+ /// The gateway addresses set manually for the EFI IPv4 network\r
+ /// stack running on the communication device this EFI IPv4\r
+ /// Configuration II Protocol manages. It is not configurable when\r
+ /// the policy is Ip4Config2PolicyDhcp. The gateway\r
+ /// addresses must be unicast IPv4 addresses. The corresponding\r
/// Data is a pointer to an array of EFI_IPv4_ADDRESS instances.\r
- /// When DataSize is 0 and Data is NULL, the existing configuration \r
+ /// When DataSize is 0 and Data is NULL, the existing configuration\r
/// is cleared from the EFI IPv4 Configuration II Protocol instance.\r
///\r
Ip4Config2DataTypeGateway,\r
///\r
- /// The DNS server list for the EFI IPv4 network stack running on \r
- /// the communication device this EFI IPv4 Configuration II \r
- /// Protocol manages. It is not configurable when the policy is \r
- /// Ip4Config2PolicyDhcp. The DNS server addresses must be \r
- /// unicast IPv4 addresses. The corresponding Data is a pointer to \r
- /// an array of EFI_IPv4_ADDRESS instances. When DataSize \r
- /// is 0 and Data is NULL, the existing configuration is cleared \r
+ /// The DNS server list for the EFI IPv4 network stack running on\r
+ /// the communication device this EFI IPv4 Configuration II\r
+ /// Protocol manages. It is not configurable when the policy is\r
+ /// Ip4Config2PolicyDhcp. The DNS server addresses must be\r
+ /// unicast IPv4 addresses. The corresponding Data is a pointer to\r
+ /// an array of EFI_IPv4_ADDRESS instances. When DataSize\r
+ /// is 0 and Data is NULL, the existing configuration is cleared\r
/// from the EFI IPv4 Configuration II Protocol instance.\r
///\r
Ip4Config2DataTypeDnsServer,\r
///\r
CHAR16 Name[EFI_IP4_CONFIG2_INTERFACE_INFO_NAME_SIZE];\r
///\r
- /// The interface type of the network interface. See RFC 1700, \r
+ /// The interface type of the network interface. See RFC 1700,\r
/// section "Number Hardware Type".\r
///\r
UINT8 IfType;\r
///\r
UINT32 RouteTableSize;\r
///\r
- /// The route table of the IPv4 network stack runs on this interface. \r
- /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in \r
+ /// The route table of the IPv4 network stack runs on this interface.\r
+ /// Set to NULL if RouteTableSize is zero. Type EFI_IP4_ROUTE_TABLE is defined in\r
/// EFI_IP4_PROTOCOL.GetModeData().\r
///\r
EFI_IP4_ROUTE_TABLE *RouteTable OPTIONAL;\r
///\r
typedef enum {\r
///\r
- /// Under this policy, the Ip4Config2DataTypeManualAddress, \r
- /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration \r
- /// data are required to be set manually. The EFI IPv4 Protocol will get all \r
- /// required configuration such as IPv4 address, subnet mask and \r
+ /// Under this policy, the Ip4Config2DataTypeManualAddress,\r
+ /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration\r
+ /// data are required to be set manually. The EFI IPv4 Protocol will get all\r
+ /// required configuration such as IPv4 address, subnet mask and\r
/// gateway settings from the EFI IPv4 Configuration II protocol.\r
///\r
Ip4Config2PolicyStatic,\r
///\r
- /// Under this policy, the Ip4Config2DataTypeManualAddress, \r
- /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are \r
- /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP \r
+ /// Under this policy, the Ip4Config2DataTypeManualAddress,\r
+ /// Ip4Config2DataTypeGateway and Ip4Config2DataTypeDnsServer configuration data are\r
+ /// not allowed to set via SetData(). All of these configurations are retrieved from DHCP\r
/// server or other auto-configuration mechanism.\r
///\r
Ip4Config2PolicyDhcp,\r
/// EFI_IP4_CONFIG2_MANUAL_ADDRESS\r
///\r
typedef struct {\r
- /// \r
+ ///\r
/// The IPv4 unicast address.\r
///\r
EFI_IPv4_ADDRESS Address;\r
///\r
- /// The subnet mask. \r
+ /// The subnet mask.\r
///\r
EFI_IPv4_ADDRESS SubnetMask;\r
} EFI_IP4_CONFIG2_MANUAL_ADDRESS;\r
\r
/**\r
- Set the configuration for the EFI IPv4 network stack running on the communication device this EFI \r
+ Set the configuration for the EFI IPv4 network stack running on the communication device this EFI\r
IPv4 Configuration II Protocol instance manages.\r
\r
- This function is used to set the configuration data of type DataType for the EFI IPv4 network stack \r
+ This function is used to set the configuration data of type DataType for the EFI IPv4 network stack\r
running on the communication device this EFI IPv4 Configuration II Protocol instance manages.\r
The successfully configured data is valid after system reset or power-off.\r
- The DataSize is used to calculate the count of structure instances in the Data for some \r
+ The DataSize is used to calculate the count of structure instances in the Data for some\r
DataType that multiple structure instances are allowed.\r
- This function is always non-blocking. When setting some typeof configuration data, an \r
- asynchronous process is invoked to check the correctness of the data, such as doing address conflict \r
- detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to \r
- indicate that such an asynchronous process is invoked and the process is not finished yet. The caller \r
+ This function is always non-blocking. When setting some typeof configuration data, an\r
+ asynchronous process is invoked to check the correctness of the data, such as doing address conflict\r
+ detection on the manually set local IPv4 address. EFI_NOT_READY is returned immediately to\r
+ indicate that such an asynchronous process is invoked and the process is not finished yet. The caller\r
willing to get the result of the asynchronous process is required to call RegisterDataNotify()\r
- to register an event on the specified configuration data. Once the event is signaled, the caller can call \r
- GetData()to get back the configuration data in order to know the result. For other types of \r
- configuration data that do not require an asynchronous configuration process, the result of the \r
- operation is immediately returned. \r
+ to register an event on the specified configuration data. Once the event is signaled, the caller can call\r
+ GetData()to get back the configuration data in order to know the result. For other types of\r
+ configuration data that do not require an asynchronous configuration process, the result of the\r
+ operation is immediately returned.\r
\r
- @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. \r
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.\r
@param[in] DataType The type of data to set.\r
@param[in] DataSize Size of the buffer pointed to by Data in bytes.\r
- @param[in] Data The data buffer to set. The type ofthe data buffer is associated \r
- with the DataType. \r
+ @param[in] Data The data buffer to set. The type ofthe data buffer is associated\r
+ with the DataType.\r
\r
- @retval EFI_SUCCESS The specified configuration data for the EFI IPv4 network stack is set \r
+ @retval EFI_SUCCESS The specified configuration data for the EFI IPv4 network stack is set\r
successfully.\r
@retval EFI_INVALID_PARAMETER One or more of the following are TRUE:\r
This is NULL.\r
- One or more fields in Data and DataSize do not match the \r
+ One or more fields in Data and DataSize do not match the\r
requirement of the data type indicated by DataType.\r
- @retval EFI_WRITE_PROTECTED The specified configuration data is read-only or the specified configuration \r
+ @retval EFI_WRITE_PROTECTED The specified configuration data is read-only or the specified configuration\r
data can not be set under the current policy.\r
@retval EFI_ACCESS_DENIED Another set operation on the specified configuration data is already in process.\r
- @retval EFI_NOT_READY An asynchronous process is invoked to set the specified configuration data and \r
+ @retval EFI_NOT_READY An asynchronous process is invoked to set the specified configuration data and\r
the process is not finished yet.\r
- @retval EFI_BAD_BUFFER_SIZE The DataSize does not match the size of the type indicated by DataType. \r
+ @retval EFI_BAD_BUFFER_SIZE The DataSize does not match the size of the type indicated by DataType.\r
@retval EFI_UNSUPPORTED This DataType is not supported.\r
@retval EFI_OUT_OF_RESOURCES Required system resources could not be allocated.\r
@retval EFI_DEVICE_ERROR An unexpected system error or network error occurred.\r
**/\r
-typedef \r
+typedef\r
EFI_STATUS\r
(EFIAPI *EFI_IP4_CONFIG2_SET_DATA) (\r
IN EFI_IP4_CONFIG2_PROTOCOL *This,\r
);\r
\r
/**\r
- Get the configuration data for the EFI IPv4 network stack running on the communication device this \r
+ Get the configuration data for the EFI IPv4 network stack running on the communication device this\r
EFI IPv4 Configuration II Protocol instance manages.\r
\r
- This function returns the configuration data of type DataType for the EFI IPv4 network stack \r
+ This function returns the configuration data of type DataType for the EFI IPv4 network stack\r
running on the communication device this EFI IPv4 Configuration II Protocol instance manages.\r
- The caller is responsible for allocating the buffer usedto return the specified configuration data and \r
+ The caller is responsible for allocating the buffer usedto return the specified configuration data and\r
the required size will be returned to the caller if the size of the buffer is too small.\r
- EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in \r
- progress asynchronous configuration process. The caller can call RegisterDataNotify() to \r
- register an event on the specified configuration data. Once the asynchronous configuration process is \r
- finished, the event will be signaled and a subsequent GetData() call will return the specified \r
+ EFI_NOT_READY is returned if the specified configuration data is not ready due to an already in\r
+ progress asynchronous configuration process. The caller can call RegisterDataNotify() to\r
+ register an event on the specified configuration data. Once the asynchronous configuration process is\r
+ finished, the event will be signaled and a subsequent GetData() call will return the specified\r
configuration data.\r
\r
- @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. \r
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.\r
@param[in] DataType The type of data to get.\r
- @param[out] DataSize On input, in bytes, the size of Data. On output, in bytes, the size \r
- of buffer required to store the specified configuration data. \r
- @param[in] Data The data buffer in which the configuration data is returned. The \r
- type of the data buffer is associated with the DataType. Ignored \r
- if DataSize is 0. \r
+ @param[out] DataSize On input, in bytes, the size of Data. On output, in bytes, the size\r
+ of buffer required to store the specified configuration data.\r
+ @param[in] Data The data buffer in which the configuration data is returned. The\r
+ type of the data buffer is associated with the DataType. Ignored\r
+ if DataSize is 0.\r
\r
@retval EFI_SUCCESS The specified configuration data is got successfully.\r
@retval EFI_INVALID_PARAMETER One or more of the followings are TRUE:\r
This is NULL.\r
DataSize is NULL.\r
Data is NULL if *DataSizeis not zero.\r
- @retval EFI_BUFFER_TOO_SMALL The size of Data is too small for the specified configuration data \r
+ @retval EFI_BUFFER_TOO_SMALL The size of Data is too small for the specified configuration data\r
and the required size is returned in DataSize.\r
- @retval EFI_NOT_READY The specified configuration data is not ready due to an already in \r
+ @retval EFI_NOT_READY The specified configuration data is not ready due to an already in\r
progress asynchronous configuration process.\r
@retval EFI_NOT_FOUND The specified configuration data is not found.\r
**/\r
);\r
\r
/**\r
- Register an event that is to be signaled whenever a configuration process on the specified \r
+ Register an event that is to be signaled whenever a configuration process on the specified\r
configuration data is done.\r
\r
- This function registers an event that is to be signaled whenever a configuration process on the \r
+ This function registers an event that is to be signaled whenever a configuration process on the\r
specified configuration data is done. An event can be registered for different DataType\r
- simultaneously and the caller is responsible for determining which type of configuration data causes \r
+ simultaneously and the caller is responsible for determining which type of configuration data causes\r
the signaling of the event in such case.\r
\r
- @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. \r
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.\r
@param[in] DataType The type of data to unregister the event for.\r
@param[in] Event The event to register.\r
\r
- @retval EFI_SUCCESS The notification event for the specified configuration data is \r
+ @retval EFI_SUCCESS The notification event for the specified configuration data is\r
registered.\r
@retval EFI_INVALID_PARAMETER This is NULL or Event is NULL.\r
@retval EFI_UNSUPPORTED The configuration data type specified by DataType is not supported.\r
\r
This function removes a previously registeredevent for the specified configuration data.\r
\r
- @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance. \r
+ @param[in] This Pointer to the EFI_IP4_CONFIG2_PROTOCOL instance.\r
@param[in] DataType The type of data to remove the previously registered event for.\r
@param[in] Event The event to unregister.\r
\r
);\r
\r
///\r
-/// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common \r
+/// The EFI_IP4_CONFIG2_PROTOCOL is designed to be the central repository for the common\r
/// configurations and the administrator configurable settings for the EFI IPv4 network stack.\r
-/// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that \r
+/// An EFI IPv4 Configuration II Protocol instance will be installed on each communication device that\r
/// the EFI IPv4 network stack runs on.\r
///\r
struct _EFI_IP4_CONFIG2_PROTOCOL {\r
projects / mirror_edk2.git / blobdiff