+++ /dev/null
-/** @file\r
- PCI Library.\r
-\r
- Functions in this library instance make use of MMIO functions in IoLib to\r
- access memory mapped PCI configuration space.\r
-\r
- All assertions for I/O operations are handled in MMIO functions in the IoLib\r
- Library.\r
-\r
- Copyright (c) 2006, Intel Corporation<BR>\r
- All rights reserved. This program and the accompanying materials\r
- are licensed and made available under the terms and conditions of the BSD License\r
- which accompanies this distribution. The full text of the license may be found at\r
- http://opensource.org/licenses/bsd-license.php\r
-\r
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
-\r
- Module Name: PciLib.c\r
-\r
-**/\r
-\r
-/**\r
- Assert the validity of a PCI address. A valid PCI address should contain 1's\r
- only in the low 28 bits.\r
-\r
- @param A The address to validate.\r
-\r
-**/\r
-#define ASSERT_INVALID_PCI_ADDRESS(A) \\r
- ASSERT (((A) & ~0xfffffff) == 0)\r
-\r
-\r
-/**\r
- Gets the base address of PCI Express.\r
- \r
- This internal functions retrieves PCI Express Base Address via a PCD entry\r
- PcdPciExpressBaseAddress.\r
- \r
- @return The base address of PCI Express.\r
-\r
-**/\r
-STATIC\r
-volatile VOID*\r
-GetPciExpressBaseAddress (\r
- VOID\r
- )\r
-{\r
- return (VOID*)(UINTN) PcdGet64 (PcdPciExpressBaseAddress);\r
-}\r
-\r
-/**\r
- Reads an 8-bit PCI configuration register.\r
-\r
- Reads and returns the 8-bit PCI configuration register specified by Address.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
-\r
- @return The read value from the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressRead8 (\r
- IN UINTN Address\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioRead8 ((UINTN) GetPciExpressBaseAddress () + Address);\r
-}\r
-\r
-/**\r
- Writes an 8-bit PCI configuration register.\r
-\r
- Writes the 8-bit PCI configuration register specified by Address with the\r
- value specified by Value. Value is returned. This function must guarantee\r
- that all PCI read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param Value The value to write.\r
-\r
- @return The value written to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressWrite8 (\r
- IN UINTN Address,\r
- IN UINT8 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioWrite8 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
-}\r
-\r
-/**\r
- Performs a bitwise inclusive OR of an 8-bit PCI configuration register with\r
- an 8-bit value.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 8-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressOr8 (\r
- IN UINTN Address,\r
- IN UINT8 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioOr8 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r
- value.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 8-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressAnd8 (\r
- IN UINTN Address,\r
- IN UINT8 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAnd8 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of an 8-bit PCI configuration register with an 8-bit\r
- value, followed a bitwise inclusive OR with another 8-bit value.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
- the value specified by OrData, and writes the result to the 8-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressAndThenOr8 (\r
- IN UINTN Address,\r
- IN UINT8 AndData,\r
- IN UINT8 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAndThenOr8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field of a PCI configuration register.\r
-\r
- Reads the bit field in an 8-bit PCI configuration register. The bit field is\r
- specified by the StartBit and the EndBit. The value of the bit field is\r
- returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If StartBit is greater than 7, then ASSERT().\r
- If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to read.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..7.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..7.\r
-\r
- @return The value of the bit field read from the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressBitFieldRead8 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldRead8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit\r
- );\r
-}\r
-\r
-/**\r
- Writes a bit field to a PCI configuration register.\r
-\r
- Writes Value to the bit field of the PCI configuration register. The bit\r
- field is specified by the StartBit and the EndBit. All other bits in the\r
- destination PCI configuration register are preserved. The new value of the\r
- 8-bit register is returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If StartBit is greater than 7, then ASSERT().\r
- If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..7.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..7.\r
- @param Value New value of the bit field.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressBitFieldWrite8 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT8 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldWrite8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- Value\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in an 8-bit PCI configuration, performs a bitwise OR, and\r
- writes the result back to the bit field in the 8-bit port.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 8-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized. Extra left bits in OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If StartBit is greater than 7, then ASSERT().\r
- If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..7.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..7.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressBitFieldOr8 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT8 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldOr8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in an 8-bit PCI configuration register, performs a bitwise\r
- AND, and writes the result back to the bit field in the 8-bit register.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 8-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized. Extra left bits in AndData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If StartBit is greater than 7, then ASSERT().\r
- If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..7.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..7.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressBitFieldAnd8 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT8 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAnd8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in an 8-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
- 8-bit port.\r
-\r
- Reads the 8-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
- the value specified by AndData, and writes the result to the 8-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized. Extra left bits in both AndData and\r
- OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If StartBit is greater than 7, then ASSERT().\r
- If EndBit is greater than 7, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..7.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..7.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT8\r
-EFIAPI\r
-PciExpressBitFieldAndThenOr8 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT8 AndData,\r
- IN UINT8 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAndThenOr8 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a 16-bit PCI configuration register.\r
-\r
- Reads and returns the 16-bit PCI configuration register specified by Address.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
-\r
- @return The read value from the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressRead16 (\r
- IN UINTN Address\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioRead16 ((UINTN) GetPciExpressBaseAddress () + Address);\r
-}\r
-\r
-/**\r
- Writes a 16-bit PCI configuration register.\r
-\r
- Writes the 16-bit PCI configuration register specified by Address with the\r
- value specified by Value. Value is returned. This function must guarantee\r
- that all PCI read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param Value The value to write.\r
-\r
- @return The value written to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressWrite16 (\r
- IN UINTN Address,\r
- IN UINT16 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioWrite16 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
-}\r
-\r
-/**\r
- Performs a bitwise inclusive OR of a 16-bit PCI configuration register with\r
- a 16-bit value.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 16-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressOr16 (\r
- IN UINTN Address,\r
- IN UINT16 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioOr16 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r
- value.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 16-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressAnd16 (\r
- IN UINTN Address,\r
- IN UINT16 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAnd16 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of a 16-bit PCI configuration register with a 16-bit\r
- value, followed a bitwise inclusive OR with another 16-bit value.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
- the value specified by OrData, and writes the result to the 16-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressAndThenOr16 (\r
- IN UINTN Address,\r
- IN UINT16 AndData,\r
- IN UINT16 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAndThenOr16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field of a PCI configuration register.\r
-\r
- Reads the bit field in a 16-bit PCI configuration register. The bit field is\r
- specified by the StartBit and the EndBit. The value of the bit field is\r
- returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
- If StartBit is greater than 15, then ASSERT().\r
- If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to read.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..15.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..15.\r
-\r
- @return The value of the bit field read from the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressBitFieldRead16 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldRead16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit\r
- );\r
-}\r
-\r
-/**\r
- Writes a bit field to a PCI configuration register.\r
-\r
- Writes Value to the bit field of the PCI configuration register. The bit\r
- field is specified by the StartBit and the EndBit. All other bits in the\r
- destination PCI configuration register are preserved. The new value of the\r
- 16-bit register is returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
- If StartBit is greater than 15, then ASSERT().\r
- If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..15.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..15.\r
- @param Value New value of the bit field.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressBitFieldWrite16 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT16 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldWrite16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- Value\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 16-bit PCI configuration, performs a bitwise OR, and\r
- writes the result back to the bit field in the 16-bit port.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 16-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized. Extra left bits in OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
- If StartBit is greater than 15, then ASSERT().\r
- If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..15.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..15.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressBitFieldOr16 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT16 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldOr16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 16-bit PCI configuration register, performs a bitwise\r
- AND, and writes the result back to the bit field in the 16-bit register.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 16-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized. Extra left bits in AndData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
- If StartBit is greater than 15, then ASSERT().\r
- If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..15.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..15.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressBitFieldAnd16 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT16 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAnd16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 16-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
- 16-bit port.\r
-\r
- Reads the 16-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
- the value specified by AndData, and writes the result to the 16-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized. Extra left bits in both AndData and\r
- OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 16-bit boundary, then ASSERT().\r
- If StartBit is greater than 15, then ASSERT().\r
- If EndBit is greater than 15, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..15.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..15.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT16\r
-EFIAPI\r
-PciExpressBitFieldAndThenOr16 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT16 AndData,\r
- IN UINT16 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAndThenOr16 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a 32-bit PCI configuration register.\r
-\r
- Reads and returns the 32-bit PCI configuration register specified by Address.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
-\r
- @return The read value from the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressRead32 (\r
- IN UINTN Address\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioRead32 ((UINTN) GetPciExpressBaseAddress () + Address);\r
-}\r
-\r
-/**\r
- Writes a 32-bit PCI configuration register.\r
-\r
- Writes the 32-bit PCI configuration register specified by Address with the\r
- value specified by Value. Value is returned. This function must guarantee\r
- that all PCI read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param Value The value to write.\r
-\r
- @return The value written to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressWrite32 (\r
- IN UINTN Address,\r
- IN UINT32 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioWrite32 ((UINTN) GetPciExpressBaseAddress () + Address, Value);\r
-}\r
-\r
-/**\r
- Performs a bitwise inclusive OR of a 32-bit PCI configuration register with\r
- a 32-bit value.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 32-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressOr32 (\r
- IN UINTN Address,\r
- IN UINT32 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioOr32 ((UINTN) GetPciExpressBaseAddress () + Address, OrData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r
- value.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 32-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressAnd32 (\r
- IN UINTN Address,\r
- IN UINT32 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAnd32 ((UINTN) GetPciExpressBaseAddress () + Address, AndData);\r
-}\r
-\r
-/**\r
- Performs a bitwise AND of a 32-bit PCI configuration register with a 32-bit\r
- value, followed a bitwise inclusive OR with another 32-bit value.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData,\r
- performs a bitwise inclusive OR between the result of the AND operation and\r
- the value specified by OrData, and writes the result to the 32-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
-\r
- @param Address Address that encodes the PCI Bus, Device, Function and\r
- Register.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressAndThenOr32 (\r
- IN UINTN Address,\r
- IN UINT32 AndData,\r
- IN UINT32 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioAndThenOr32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field of a PCI configuration register.\r
-\r
- Reads the bit field in a 32-bit PCI configuration register. The bit field is\r
- specified by the StartBit and the EndBit. The value of the bit field is\r
- returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
- If StartBit is greater than 31, then ASSERT().\r
- If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to read.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..31.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..31.\r
-\r
- @return The value of the bit field read from the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressBitFieldRead32 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldRead32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit\r
- );\r
-}\r
-\r
-/**\r
- Writes a bit field to a PCI configuration register.\r
-\r
- Writes Value to the bit field of the PCI configuration register. The bit\r
- field is specified by the StartBit and the EndBit. All other bits in the\r
- destination PCI configuration register are preserved. The new value of the\r
- 32-bit register is returned.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
- If StartBit is greater than 31, then ASSERT().\r
- If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..31.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..31.\r
- @param Value New value of the bit field.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressBitFieldWrite32 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT32 Value\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldWrite32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- Value\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 32-bit PCI configuration, performs a bitwise OR, and\r
- writes the result back to the bit field in the 32-bit port.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise inclusive OR between the read result and the value specified by\r
- OrData, and writes the result to the 32-bit PCI configuration register\r
- specified by Address. The value written to the PCI configuration register is\r
- returned. This function must guarantee that all PCI read and write operations\r
- are serialized. Extra left bits in OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
- If StartBit is greater than 31, then ASSERT().\r
- If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..31.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..31.\r
- @param OrData The value to OR with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressBitFieldOr32 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT32 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldOr32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 32-bit PCI configuration register, performs a bitwise\r
- AND, and writes the result back to the bit field in the 32-bit register.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise AND between the read result and the value specified by AndData, and\r
- writes the result to the 32-bit PCI configuration register specified by\r
- Address. The value written to the PCI configuration register is returned.\r
- This function must guarantee that all PCI read and write operations are\r
- serialized. Extra left bits in AndData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
- If StartBit is greater than 31, then ASSERT().\r
- If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..31.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..31.\r
- @param AndData The value to AND with the PCI configuration register.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressBitFieldAnd32 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT32 AndData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAnd32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData\r
- );\r
-}\r
-\r
-/**\r
- Reads a bit field in a 32-bit port, performs a bitwise AND followed by a\r
- bitwise inclusive OR, and writes the result back to the bit field in the\r
- 32-bit port.\r
-\r
- Reads the 32-bit PCI configuration register specified by Address, performs a\r
- bitwise AND followed by a bitwise inclusive OR between the read result and\r
- the value specified by AndData, and writes the result to the 32-bit PCI\r
- configuration register specified by Address. The value written to the PCI\r
- configuration register is returned. This function must guarantee that all PCI\r
- read and write operations are serialized. Extra left bits in both AndData and\r
- OrData are stripped.\r
-\r
- If Address > 0x0FFFFFFF, then ASSERT().\r
- If Address is not aligned on a 32-bit boundary, then ASSERT().\r
- If StartBit is greater than 31, then ASSERT().\r
- If EndBit is greater than 31, then ASSERT().\r
- If EndBit is less than StartBit, then ASSERT().\r
-\r
- @param Address PCI configuration register to write.\r
- @param StartBit The ordinal of the least significant bit in the bit field.\r
- Range 0..31.\r
- @param EndBit The ordinal of the most significant bit in the bit field.\r
- Range 0..31.\r
- @param AndData The value to AND with the PCI configuration register.\r
- @param OrData The value to OR with the result of the AND operation.\r
-\r
- @return The value written back to the PCI configuration register.\r
-\r
-**/\r
-UINT32\r
-EFIAPI\r
-PciExpressBitFieldAndThenOr32 (\r
- IN UINTN Address,\r
- IN UINTN StartBit,\r
- IN UINTN EndBit,\r
- IN UINT32 AndData,\r
- IN UINT32 OrData\r
- )\r
-{\r
- ASSERT_INVALID_PCI_ADDRESS (Address);\r
- return MmioBitFieldAndThenOr32 (\r
- (UINTN) GetPciExpressBaseAddress () + Address,\r
- StartBit,\r
- EndBit,\r
- AndData,\r
- OrData\r
- );\r
-}\r
-\r
-/**\r
- Reads a range of PCI configuration registers into a caller supplied buffer.\r
-\r
- Reads the range of PCI configuration registers specified by StartAddress and\r
- Size into the buffer specified by Buffer. This function only allows the PCI\r
- configuration registers from a single PCI function to be read. Size is\r
- returned. When possible 32-bit PCI configuration read cycles are used to read\r
- from StartAdress to StartAddress + Size. Due to alignment restrictions, 8-bit\r
- and 16-bit PCI configuration read cycles may be used at the beginning and the\r
- end of the range.\r
-\r
- If StartAddress > 0x0FFFFFFF, then ASSERT().\r
- If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().\r
- If Size > 0 and Buffer is NULL, then ASSERT().\r
-\r
- @param StartAddress Starting address that encodes the PCI Bus, Device,\r
- Function and Register.\r
- @param Size Size in bytes of the transfer.\r
- @param Buffer Pointer to a buffer receiving the data read.\r
-\r
- @return Size\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-PciExpressReadBuffer (\r
- IN UINTN StartAddress,\r
- IN UINTN Size,\r
- OUT VOID *Buffer\r
- )\r
-{\r
- UINTN ReturnValue;\r
-\r
- ASSERT_INVALID_PCI_ADDRESS (StartAddress);\r
- ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);\r
-\r
- if (Size == 0) {\r
- return Size;\r
- }\r
-\r
- ASSERT (Buffer != NULL);\r
-\r
- //\r
- // Save Size for return\r
- //\r
- ReturnValue = Size;\r
-\r
- if ((StartAddress & 1) != 0) {\r
- //\r
- // Read a byte if StartAddress is byte aligned\r
- //\r
- *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);\r
- StartAddress += sizeof (UINT8);\r
- Size -= sizeof (UINT8);\r
- Buffer = (UINT8*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {\r
- //\r
- // Read a word if StartAddress is word aligned\r
- //\r
- *(volatile UINT16 *)Buffer = PciExpressRead16 (StartAddress);\r
- StartAddress += sizeof (UINT16);\r
- Size -= sizeof (UINT16);\r
- Buffer = (UINT16*)Buffer + 1;\r
- }\r
-\r
- while (Size >= sizeof (UINT32)) {\r
- //\r
- // Read as many double words as possible\r
- //\r
- *(volatile UINT32 *)Buffer = PciExpressRead32 (StartAddress);\r
- StartAddress += sizeof (UINT32);\r
- Size -= sizeof (UINT32);\r
- Buffer = (UINT32*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT16)) {\r
- //\r
- // Read the last remaining word if exist\r
- //\r
- *(volatile UINT16 *)Buffer = PciExpressRead16 (StartAddress);\r
- StartAddress += sizeof (UINT16);\r
- Size -= sizeof (UINT16);\r
- Buffer = (UINT16*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT8)) {\r
- //\r
- // Read the last remaining byte if exist\r
- //\r
- *(volatile UINT8 *)Buffer = PciExpressRead8 (StartAddress);\r
- }\r
-\r
- return ReturnValue;\r
-}\r
-\r
-/**\r
- Copies the data in a caller supplied buffer to a specified range of PCI\r
- configuration space.\r
-\r
- Writes the range of PCI configuration registers specified by StartAddress and\r
- Size from the buffer specified by Buffer. This function only allows the PCI\r
- configuration registers from a single PCI function to be written. Size is\r
- returned. When possible 32-bit PCI configuration write cycles are used to\r
- write from StartAdress to StartAddress + Size. Due to alignment restrictions,\r
- 8-bit and 16-bit PCI configuration write cycles may be used at the beginning\r
- and the end of the range.\r
-\r
- If StartAddress > 0x0FFFFFFF, then ASSERT().\r
- If ((StartAddress & 0xFFF) + Size) > 0x1000, then ASSERT().\r
- If Size > 0 and Buffer is NULL, then ASSERT().\r
-\r
- @param StartAddress Starting address that encodes the PCI Bus, Device,\r
- Function and Register.\r
- @param Size Size in bytes of the transfer.\r
- @param Buffer Pointer to a buffer containing the data to write.\r
-\r
- @return Size\r
-\r
-**/\r
-UINTN\r
-EFIAPI\r
-PciExpressWriteBuffer (\r
- IN UINTN StartAddress,\r
- IN UINTN Size,\r
- IN VOID *Buffer\r
- )\r
-{\r
- UINTN ReturnValue;\r
-\r
- ASSERT_INVALID_PCI_ADDRESS (StartAddress);\r
- ASSERT (((StartAddress & 0xFFF) + Size) <= 0x1000);\r
-\r
- if (Size == 0) {\r
- return 0;\r
- }\r
-\r
- ASSERT (Buffer != NULL);\r
-\r
- //\r
- // Save Size for return\r
- //\r
- ReturnValue = Size;\r
-\r
- if ((StartAddress & 1) != 0) {\r
- //\r
- // Write a byte if StartAddress is byte aligned\r
- //\r
- PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);\r
- StartAddress += sizeof (UINT8);\r
- Size -= sizeof (UINT8);\r
- Buffer = (UINT8*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT16) && (StartAddress & 2) != 0) {\r
- //\r
- // Write a word if StartAddress is word aligned\r
- //\r
- PciExpressWrite16 (StartAddress, *(UINT16*)Buffer);\r
- StartAddress += sizeof (UINT16);\r
- Size -= sizeof (UINT16);\r
- Buffer = (UINT16*)Buffer + 1;\r
- }\r
-\r
- while (Size >= sizeof (UINT32)) {\r
- //\r
- // Write as many double words as possible\r
- //\r
- PciExpressWrite32 (StartAddress, *(UINT32*)Buffer);\r
- StartAddress += sizeof (UINT32);\r
- Size -= sizeof (UINT32);\r
- Buffer = (UINT32*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT16)) {\r
- //\r
- // Write the last remaining word if exist\r
- //\r
- PciExpressWrite16 (StartAddress, *(UINT16*)Buffer);\r
- StartAddress += sizeof (UINT16);\r
- Size -= sizeof (UINT16);\r
- Buffer = (UINT16*)Buffer + 1;\r
- }\r
-\r
- if (Size >= sizeof (UINT8)) {\r
- //\r
- // Write the last remaining byte if exist\r
- //\r
- PciExpressWrite8 (StartAddress, *(UINT8*)Buffer);\r
- }\r
-\r
- return ReturnValue;\r
-}\r
projects / mirror_edk2.git / blobdiff