volatile UINTN gVector;
-/**\r
- C Interrupt Handler calledin the interrupt context when Source interrupt is active.\r
-\r
- @param Source Source of the interrupt. Hardware routing off a specific platform defines\r
- what source means.\r
- @param SystemContext Pointer to system register context. Mostly used by debuggers and will\r
- update the system context after the return from the interrupt if \r
- modified. Don't change these values unless you know what you are doing\r
-\r
+/**
+
+ C Interrupt Handler calledin the interrupt context when Source interrupt is active.
+
+
+ @param Source Source of the interrupt. Hardware routing off a specific platform defines
+ what source means.
+
+ @param SystemContext Pointer to system register context. Mostly used by debuggers and will
+ update the system context after the return from the interrupt if
+ modified. Don't change these values unless you know what you are doing
+
**/
VOID
EFIAPI
IN EFI_SYSTEM_CONTEXT SystemContext
)
{
- EFI_TPL OriginalTPL;\r
-\r
- //\r
- // DXE core uses this callback for the EFI timer tick. The DXE core uses locks \r
- // that raise to TPL_HIGH and then restore back to current level. Thus we need\r
- // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick. \r
- //\r
- OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);\r
+ EFI_TPL OriginalTPL;
+
+
+
+ //
+ // DXE core uses this callback for the EFI timer tick. The DXE core uses locks
+ // that raise to TPL_HIGH and then restore back to current level. Thus we need
+ // to make sure TPL level is set to TPL_HIGH while we are handling the timer tick.
+ //
+ OriginalTPL = gBS->RaiseTPL (TPL_HIGH_LEVEL);
+
if (mTimerPeriodicCallback) {
mTimerPeriodicCallback(SystemContext);
}
// Clear all timer interrupts
- MmioWrite32(TISR, TISR_CLEAR_ALL);
+ MmioWrite32 (TISR, TISR_CLEAR_ALL);
// Poll interrupt status bits to ensure clearing
- while ((MmioRead32(TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);
+ while ((MmioRead32 (TISR) & TISR_ALL_INTERRUPT_MASK) != TISR_NO_INTERRUPTS_PENDING);
gBS->RestoreTPL (OriginalTPL);
}
-/**\r
- This function registers the handler NotifyFunction so it is called every time \r
- the timer interrupt fires. It also passes the amount of time since the last \r
- handler call to the NotifyFunction. If NotifyFunction is NULL, then the \r
- handler is unregistered. If the handler is registered, then EFI_SUCCESS is \r
- returned. If the CPU does not support registering a timer interrupt handler, \r
- then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler \r
- when a handler is already registered, then EFI_ALREADY_STARTED is returned. \r
- If an attempt is made to unregister a handler when a handler is not registered, \r
- then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to \r
- register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR \r
- is returned.\r
-\r
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
- @param NotifyFunction The function to call when a timer interrupt fires. This\r
- function executes at TPL_HIGH_LEVEL. The DXE Core will\r
- register a handler for the timer interrupt, so it can know\r
- how much time has passed. This information is used to\r
- signal timer based events. NULL will unregister the handler.\r
-\r
- @retval EFI_SUCCESS The timer handler was registered.\r
- @retval EFI_UNSUPPORTED The platform does not support timer interrupts.\r
- @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already\r
- registered.\r
- @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not\r
- previously registered.\r
- @retval EFI_DEVICE_ERROR The timer handler could not be registered.\r
-\r
-**/\r
+/**
+ This function registers the handler NotifyFunction so it is called every time
+ the timer interrupt fires. It also passes the amount of time since the last
+ handler call to the NotifyFunction. If NotifyFunction is NULL, then the
+ handler is unregistered. If the handler is registered, then EFI_SUCCESS is
+ returned. If the CPU does not support registering a timer interrupt handler,
+ then EFI_UNSUPPORTED is returned. If an attempt is made to register a handler
+ when a handler is already registered, then EFI_ALREADY_STARTED is returned.
+ If an attempt is made to unregister a handler when a handler is not registered,
+ then EFI_INVALID_PARAMETER is returned. If an error occurs attempting to
+ register the NotifyFunction with the timer interrupt, then EFI_DEVICE_ERROR
+ is returned.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param NotifyFunction The function to call when a timer interrupt fires. This
+ function executes at TPL_HIGH_LEVEL. The DXE Core will
+ register a handler for the timer interrupt, so it can know
+ how much time has passed. This information is used to
+ signal timer based events. NULL will unregister the handler.
+ @retval EFI_SUCCESS The timer handler was registered.
+ @retval EFI_UNSUPPORTED The platform does not support timer interrupts.
+ @retval EFI_ALREADY_STARTED NotifyFunction is not NULL, and a handler is already
+ registered.
+ @retval EFI_INVALID_PARAMETER NotifyFunction is NULL, and a handler was not
+ previously registered.
+ @retval EFI_DEVICE_ERROR The timer handler could not be registered.
+
+**/
EFI_STATUS
EFIAPI
TimerDriverRegisterHandler (
return EFI_SUCCESS;
}
-/**\r
- This function adjusts the period of timer interrupts to the value specified \r
- by TimerPeriod. If the timer period is updated, then the selected timer \r
- period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If \r
- the timer hardware is not programmable, then EFI_UNSUPPORTED is returned. \r
- If an error occurs while attempting to update the timer period, then the \r
- timer hardware will be put back in its state prior to this call, and \r
- EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt \r
- is disabled. This is not the same as disabling the CPU's interrupts. \r
- Instead, it must either turn off the timer hardware, or it must adjust the \r
- interrupt controller so that a CPU interrupt is not generated when the timer \r
- interrupt fires. \r
-\r
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
- @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If\r
- the timer hardware is not programmable, then EFI_UNSUPPORTED is\r
- returned. If the timer is programmable, then the timer period\r
- will be rounded up to the nearest timer period that is supported\r
- by the timer hardware. If TimerPeriod is set to 0, then the\r
- timer interrupts will be disabled.\r
-\r
- @retval EFI_SUCCESS The timer period was changed.\r
- @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.\r
- @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.\r
-\r
+/**
+
+ This function adjusts the period of timer interrupts to the value specified
+ by TimerPeriod. If the timer period is updated, then the selected timer
+ period is stored in EFI_TIMER.TimerPeriod, and EFI_SUCCESS is returned. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is returned.
+ If an error occurs while attempting to update the timer period, then the
+ timer hardware will be put back in its state prior to this call, and
+ EFI_DEVICE_ERROR is returned. If TimerPeriod is 0, then the timer interrupt
+ is disabled. This is not the same as disabling the CPU's interrupts.
+ Instead, it must either turn off the timer hardware, or it must adjust the
+ interrupt controller so that a CPU interrupt is not generated when the timer
+ interrupt fires.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod The rate to program the timer interrupt in 100 nS units. If
+ the timer hardware is not programmable, then EFI_UNSUPPORTED is
+ returned. If the timer is programmable, then the timer period
+ will be rounded up to the nearest timer period that is supported
+ by the timer hardware. If TimerPeriod is set to 0, then the
+ timer interrupts will be disabled.
+
+
+ @retval EFI_SUCCESS The timer period was changed.
+ @retval EFI_UNSUPPORTED The platform cannot change the period of the timer interrupt.
+ @retval EFI_DEVICE_ERROR The timer period could not be changed due to a device error.
+
**/
EFI_STATUS
EFIAPI
if (TimerPeriod == 0) {
// Turn off GPTIMER3
- MmioWrite32(TCLR, TCLR_ST_OFF);
+ MmioWrite32 (TCLR, TCLR_ST_OFF);
Status = gInterrupt->DisableInterruptSource(gInterrupt, gVector);
} else {
// Calculate required timer count
- TimerCount = DivU64x32(TimerPeriod * 100, PcdGet32(PcdEmbeddedFdPerformanceCounterPeriodInNanoseconds));
+ TimerCount = DivU64x32(TimerPeriod * 100, PcdGet32(PcdEmbeddedPerformanceCounterPeriodInNanoseconds));
// Set GPTIMER3 Load register
LoadValue = (INT32) -TimerCount;
- MmioWrite32(TLDR, LoadValue);
- MmioWrite32(TCRR, LoadValue);
+ MmioWrite32 (TLDR, LoadValue);
+ MmioWrite32 (TCRR, LoadValue);
// Enable Overflow interrupt
- MmioWrite32(TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE);
+ MmioWrite32 (TIER, TIER_TCAR_IT_DISABLE | TIER_OVF_IT_ENABLE | TIER_MAT_IT_DISABLE);
// Turn on GPTIMER3, it will reload at overflow
- MmioWrite32(TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);
+ MmioWrite32 (TCLR, TCLR_AR_AUTORELOAD | TCLR_ST_ON);
Status = gInterrupt->EnableInterruptSource(gInterrupt, gVector);
}
}
-/**\r
- This function retrieves the period of timer interrupts in 100 ns units, \r
- returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod \r
- is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is \r
- returned, then the timer is currently disabled.\r
-\r
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
- @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If\r
- 0 is returned, then the timer is currently disabled.\r
-\r
- @retval EFI_SUCCESS The timer period was returned in TimerPeriod.\r
- @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.\r
-\r
+/**
+ This function retrieves the period of timer interrupts in 100 ns units,
+ returns that value in TimerPeriod, and returns EFI_SUCCESS. If TimerPeriod
+ is NULL, then EFI_INVALID_PARAMETER is returned. If a TimerPeriod of 0 is
+ returned, then the timer is currently disabled.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+ @param TimerPeriod A pointer to the timer period to retrieve in 100 ns units. If
+ 0 is returned, then the timer is currently disabled.
+
+
+ @retval EFI_SUCCESS The timer period was returned in TimerPeriod.
+ @retval EFI_INVALID_PARAMETER TimerPeriod is NULL.
+
**/
EFI_STATUS
EFIAPI
return EFI_SUCCESS;
}
-/**\r
- This function generates a soft timer interrupt. If the platform does not support soft \r
- timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned. \r
- If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler() \r
- service, then a soft timer interrupt will be generated. If the timer interrupt is \r
- enabled when this service is called, then the registered handler will be invoked. The \r
- registered handler should not be able to distinguish a hardware-generated timer \r
- interrupt from a software-generated timer interrupt.\r
-\r
- @param This The EFI_TIMER_ARCH_PROTOCOL instance.\r
-\r
- @retval EFI_SUCCESS The soft timer interrupt was generated.\r
- @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.\r
-\r
+/**
+ This function generates a soft timer interrupt. If the platform does not support soft
+ timer interrupts, then EFI_UNSUPPORTED is returned. Otherwise, EFI_SUCCESS is returned.
+ If a handler has been registered through the EFI_TIMER_ARCH_PROTOCOL.RegisterHandler()
+ service, then a soft timer interrupt will be generated. If the timer interrupt is
+ enabled when this service is called, then the registered handler will be invoked. The
+ registered handler should not be able to distinguish a hardware-generated timer
+ interrupt from a software-generated timer interrupt.
+
+ @param This The EFI_TIMER_ARCH_PROTOCOL instance.
+
+ @retval EFI_SUCCESS The soft timer interrupt was generated.
+ @retval EFI_UNSUPPORTED The platform does not support the generation of soft timer interrupts.
+
**/
EFI_STATUS
EFIAPI
}
-/**\r
- Interface stucture for the Timer Architectural Protocol.\r
-\r
- @par Protocol Description:\r
- This protocol provides the services to initialize a periodic timer \r
- interrupt, and to register a handler that is called each time the timer\r
- interrupt fires. It may also provide a service to adjust the rate of the\r
- periodic timer interrupt. When a timer interrupt occurs, the handler is \r
- passed the amount of time that has passed since the previous timer \r
- interrupt.\r
-\r
- @param RegisterHandler\r
- Registers a handler that will be called each time the \r
- timer interrupt fires. TimerPeriod defines the minimum \r
- time between timer interrupts, so TimerPeriod will also \r
- be the minimum time between calls to the registered \r
- handler.\r
-\r
- @param SetTimerPeriod\r
- Sets the period of the timer interrupt in 100 nS units. \r
- This function is optional, and may return EFI_UNSUPPORTED. \r
- If this function is supported, then the timer period will \r
- be rounded up to the nearest supported timer period.\r
-\r
- @param GetTimerPeriod\r
- Retrieves the period of the timer interrupt in 100 nS units.\r
-\r
- @param GenerateSoftInterrupt\r
- Generates a soft timer interrupt that simulates the firing of \r
- the timer interrupt. This service can be used to invoke the \r
- registered handler if the timer interrupt has been masked for \r
- a period of time.\r
-\r
+/**
+ Interface stucture for the Timer Architectural Protocol.
+
+ @par Protocol Description:
+ This protocol provides the services to initialize a periodic timer
+ interrupt, and to register a handler that is called each time the timer
+ interrupt fires. It may also provide a service to adjust the rate of the
+ periodic timer interrupt. When a timer interrupt occurs, the handler is
+ passed the amount of time that has passed since the previous timer
+ interrupt.
+
+ @param RegisterHandler
+ Registers a handler that will be called each time the
+ timer interrupt fires. TimerPeriod defines the minimum
+ time between timer interrupts, so TimerPeriod will also
+ be the minimum time between calls to the registered
+ handler.
+
+ @param SetTimerPeriod
+ Sets the period of the timer interrupt in 100 nS units.
+ This function is optional, and may return EFI_UNSUPPORTED.
+ If this function is supported, then the timer period will
+ be rounded up to the nearest supported timer period.
+
+
+ @param GetTimerPeriod
+ Retrieves the period of the timer interrupt in 100 nS units.
+
+ @param GenerateSoftInterrupt
+ Generates a soft timer interrupt that simulates the firing of
+ the timer interrupt. This service can be used to invoke the registered handler if the timer interrupt has been masked for
+ a period of time.
+
**/
EFI_TIMER_ARCH_PROTOCOL gTimer = {
TimerDriverRegisterHandler,
};
-/**\r
- Initialize the state information for the Timer Architectural Protocol and\r
- the Timer Debug support protocol that allows the debugger to break into a\r
- running program.\r
-\r
- @param ImageHandle of the loaded driver\r
- @param SystemTable Pointer to the System Table\r
-\r
- @retval EFI_SUCCESS Protocol registered\r
- @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure\r
- @retval EFI_DEVICE_ERROR Hardware problems\r
-\r
+/**
+ Initialize the state information for the Timer Architectural Protocol and
+ the Timer Debug support protocol that allows the debugger to break into a
+ running program.
+
+ @param ImageHandle of the loaded driver
+ @param SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS Protocol registered
+ @retval EFI_OUT_OF_RESOURCES Cannot allocate protocol data structure
+ @retval EFI_DEVICE_ERROR Hardware problems
+
**/
EFI_STATUS
EFIAPI
ASSERT_EFI_ERROR (Status);
// Set up the timer registers
- TimerBaseAddress = TimerBase(FixedPcdGet32(PcdBeagleArchTimer));
+ TimerBaseAddress = TimerBase(FixedPcdGet32(PcdOmap35xxArchTimer));
TISR = TimerBaseAddress + GPTIMER_TISR;
TCLR = TimerBaseAddress + GPTIMER_TCLR;
TLDR = TimerBaseAddress + GPTIMER_TLDR;
ASSERT_EFI_ERROR (Status);
// Install interrupt handler
- gVector = InterruptVectorForTimer(FixedPcdGet32(PcdBeagleArchTimer));
+ gVector = InterruptVectorForTimer(FixedPcdGet32(PcdOmap35xxArchTimer));
Status = gInterrupt->RegisterInterruptSource(gInterrupt, gVector, TimerInterruptHandler);
ASSERT_EFI_ERROR (Status);
projects / mirror_edk2.git / blobdiff