-#/** @file\r
+## @file\r
# Open Virtual Machine Firmware: FDF\r
#\r
-# Copyright (c) 2006 - 2009, Intel Corporation\r
+# Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.<BR>\r
#\r
-# All rights reserved. This program and the accompanying materials\r
+# This program and the accompanying materials\r
# are licensed and made available under the terms and conditions of the BSD License\r
# which accompanies this distribution. The full text of the license may be found at\r
# http://opensource.org/licenses/bsd-license.php\r
# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
#\r
-#**/\r
+##\r
\r
################################################################################\r
+\r
#\r
-# FD Section\r
-# The [FD] Section is made up of the definition statements and a\r
-# description of what goes into the Flash Device Image. Each FD section\r
-# defines one flash "device" image. A flash device image may be one of\r
-# the following: Removable media bootable image (like a boot floppy\r
-# image,) an Option ROM image (that would be "flashed" into an add-in\r
-# card,) a System "Flash" image (that would be burned into a system's\r
-# flash) or an Update ("Capsule") image that will be used to update and\r
-# existing system flash.\r
+# Default flash size for DEBUG build is 2MB. For RELEASE it is 1MB.\r
#\r
-################################################################################\r
+# Defining FD_SIZE_1MB or FD_SIZE_2MB on the build command line can\r
+# override this.\r
+#\r
+[Defines]\r
+!if $(TARGET) == RELEASE\r
+!ifndef $(FD_SIZE_2MB)\r
+DEFINE FD_SIZE_1MB=\r
+!endif\r
+!endif\r
+\r
+!ifdef $(FD_SIZE_1MB)\r
+[FD.OVMF]\r
+BaseAddress = 0xFFF00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress\r
+Size = 0x00100000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize\r
+ErasePolarity = 1\r
+BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize\r
+NumBlocks = 0x100\r
+!else\r
[FD.OVMF]\r
-BaseAddress = 0xFFE00000 # The base address of the FLASH Device.\r
-Size = 0x00200000 # The size in bytes of the FLASH Device\r
+BaseAddress = 0xFFE00000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFdBaseAddress\r
+Size = 0x00200000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareFdSize\r
+ErasePolarity = 1\r
+BlockSize = 0x1000|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFirmwareBlockSize\r
+NumBlocks = 0x200\r
+!endif\r
+\r
+0x00000000|0x0000e000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageVariableBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize\r
+#NV_VARIABLE_STORE\r
+DATA = {\r
+ ## This is the EFI_FIRMWARE_VOLUME_HEADER\r
+ # ZeroVector []\r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ # FileSystemGuid: gEfiSystemNvDataFvGuid =\r
+ # { 0xFFF12B8D, 0x7696, 0x4C8B,\r
+ # { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}\r
+ 0x8D, 0x2B, 0xF1, 0xFF, 0x96, 0x76, 0x8B, 0x4C,\r
+ 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50,\r
+ # FvLength: 0x20000\r
+ 0x00, 0x00, 0x02, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ # Signature "_FVH" # Attributes\r
+ 0x5f, 0x46, 0x56, 0x48, 0xff, 0xfe, 0x04, 0x00,\r
+ # HeaderLength # CheckSum # ExtHeaderOffset #Reserved #Revision\r
+ 0x48, 0x00, 0x19, 0xF9, 0x00, 0x00, 0x00, 0x02,\r
+ # Blockmap[0]: 0x20 Blocks * 0x1000 Bytes / Block\r
+ 0x20, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,\r
+ # Blockmap[1]: End\r
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\r
+ ## This is the VARIABLE_STORE_HEADER\r
+!if $(SECURE_BOOT_ENABLE) == TRUE\r
+ # Signature: gEfiAuthenticatedVariableGuid =\r
+ # { 0xaaf32c78, 0x947b, 0x439a,\r
+ # { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 }}\r
+ 0x78, 0x2c, 0xf3, 0xaa, 0x7b, 0x94, 0x9a, 0x43,\r
+ 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92,\r
+!else\r
+ # Signature: gEfiVariableGuid =\r
+ # { 0xddcf3616, 0x3275, 0x4164,\r
+ # { 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d }}\r
+ 0x16, 0x36, 0xcf, 0xdd, 0x75, 0x32, 0x64, 0x41,\r
+ 0x98, 0xb6, 0xfe, 0x85, 0x70, 0x7f, 0xfe, 0x7d,\r
+!endif\r
+ # Size: 0xe000 (gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableSize) -\r
+ # 0x48 (size of EFI_FIRMWARE_VOLUME_HEADER) = 0xdfb8\r
+ # This can speed up the Variable Dispatch a bit.\r
+ 0xB8, 0xDF, 0x00, 0x00,\r
+ # FORMATTED: 0x5A #HEALTHY: 0xFE #Reserved: UINT16 #Reserved1: UINT32\r
+ 0x5A, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
+}\r
+\r
+0x0000e000|0x00001000\r
+#NV_EVENT_LOG\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageEventLogSize\r
+\r
+0x0000f000|0x00001000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwWorkingBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingSize\r
+#NV_FTW_WORKING\r
+DATA = {\r
+ # EFI_FAULT_TOLERANT_WORKING_BLOCK_HEADER->Signature = gEdkiiWorkingBlockSignatureGuid =\r
+ # { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}\r
+ 0x2b, 0x29, 0x58, 0x9e, 0x68, 0x7c, 0x7d, 0x49,\r
+ 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95,\r
+ # Crc:UINT32 #WorkingBlockValid:1, WorkingBlockInvalid:1, Reserved\r
+ 0x2c, 0xaf, 0x2c, 0x64, 0xFE, 0xFF, 0xFF, 0xFF,\r
+ # WriteQueueSize: UINT64\r
+ 0xE0, 0x0F, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00\r
+}\r
+\r
+0x00010000|0x00010000\r
+#NV_FTW_SPARE\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfFlashNvStorageFtwSpareBase|gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareSize\r
+\r
+!ifdef $(FD_SIZE_1MB)\r
+0x00020000|0x000CC000\r
+FV = FVMAIN_COMPACT\r
+\r
+0x000EC000|0x14000\r
+FV = SECFV\r
+\r
+!else\r
+0x00020000|0x001AC000\r
+FV = FVMAIN_COMPACT\r
+\r
+0x001CC000|0x34000\r
+FV = SECFV\r
+!endif\r
+\r
+################################################################################\r
+\r
+[FD.MEMFD]\r
+BaseAddress = 0x800000\r
+Size = 0x800000\r
ErasePolarity = 1\r
BlockSize = 0x10000\r
-NumBlocks = 0x20\r
+NumBlocks = 0x80\r
+\r
+0x000000|0x006000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPageTablesSize\r
+\r
+0x010000|0x008000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfSecPeiTempRamSize\r
+\r
+0x018000|0x008000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdS3AcpiReservedMemoryBase|gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdS3AcpiReservedMemorySize\r
+\r
+0x020000|0x0E0000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfPeiMemFvSize\r
+FV = PEIFV\r
+\r
+0x100000|0x700000\r
+gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvBase|gUefiOvmfPkgTokenSpaceGuid.PcdOvmfDxeMemFvSize\r
+FV = DXEFV\r
\r
################################################################################\r
+\r
+[FV.SECFV]\r
+BlockSize = 0x1000\r
+FvAlignment = 16\r
+ERASE_POLARITY = 1\r
+MEMORY_MAPPED = TRUE\r
+STICKY_WRITE = TRUE\r
+LOCK_CAP = TRUE\r
+LOCK_STATUS = TRUE\r
+WRITE_DISABLED_CAP = TRUE\r
+WRITE_ENABLED_CAP = TRUE\r
+WRITE_STATUS = TRUE\r
+WRITE_LOCK_CAP = TRUE\r
+WRITE_LOCK_STATUS = TRUE\r
+READ_DISABLED_CAP = TRUE\r
+READ_ENABLED_CAP = TRUE\r
+READ_STATUS = TRUE\r
+READ_LOCK_CAP = TRUE\r
+READ_LOCK_STATUS = TRUE\r
+\r
#\r
-# Following are lists of FD Region layout which correspond to the locations of different\r
-# images within the flash device.\r
-#\r
-# Regions must be defined in ascending order and may not overlap.\r
+# SEC Phase modules\r
#\r
-# A Layout Region start with a eight digit hex offset (leading "0x" required) followed by\r
-# the pipe "|" character, followed by the size of the region, also in hex with the leading\r
-# "0x" characters. Like:\r
-# Offset|Size\r
-# PcdOffsetCName|PcdSizeCName\r
-# RegionType <FV, DATA, or FILE>\r
+# The code in this FV handles the initial firmware startup, and\r
+# decompresses the PEI and DXE FVs which handles the rest of the boot sequence.\r
#\r
-################################################################################\r
-0x0|0x200000\r
-gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoveryBase|gEfiUnixPkgTokenSpaceGuid.PcdUnixFlashFvRecoverySize\r
-FV = MAINFV\r
+INF OvmfPkg/Sec/SecMain.inf\r
+\r
+INF RuleOverride=RESET_VECTOR USE = IA32 UefiCpuPkg/ResetVector/Vtf0/Bin/ResetVector.inf\r
\r
################################################################################\r
+[FV.PEIFV]\r
+BlockSize = 0x10000\r
+FvAlignment = 16\r
+ERASE_POLARITY = 1\r
+MEMORY_MAPPED = TRUE\r
+STICKY_WRITE = TRUE\r
+LOCK_CAP = TRUE\r
+LOCK_STATUS = TRUE\r
+WRITE_DISABLED_CAP = TRUE\r
+WRITE_ENABLED_CAP = TRUE\r
+WRITE_STATUS = TRUE\r
+WRITE_LOCK_CAP = TRUE\r
+WRITE_LOCK_STATUS = TRUE\r
+READ_DISABLED_CAP = TRUE\r
+READ_ENABLED_CAP = TRUE\r
+READ_STATUS = TRUE\r
+READ_LOCK_CAP = TRUE\r
+READ_LOCK_STATUS = TRUE\r
+\r
+APRIORI PEI {\r
+ INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
+}\r
+\r
#\r
-# FV Section\r
-#\r
-# [FV] section is used to define what components or modules are placed within a flash\r
-# device file. This section also defines order the components and modules are positioned\r
-# within the image. The [FV] section consists of define statements, set statements and\r
-# module statements.\r
+# PEI Phase modules\r
#\r
+INF MdeModulePkg/Core/Pei/PeiMain.inf\r
+INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
+INF IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
+INF OvmfPkg/PlatformPei/PlatformPei.inf\r
+INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
+\r
################################################################################\r
+\r
[FV.DXEFV]\r
-BlockSize = 0x1000\r
-FvAlignment = 16 #FV alignment and FV attributes setting.\r
+BlockSize = 0x10000\r
+FvAlignment = 16\r
ERASE_POLARITY = 1\r
MEMORY_MAPPED = TRUE\r
STICKY_WRITE = TRUE\r
READ_LOCK_CAP = TRUE\r
READ_LOCK_STATUS = TRUE\r
\r
-#\r
-# Files to be placed in DXEFV\r
-#\r
-# This firmware volume will have files placed in it uncompressed,\r
-# and then then entire firmware volume will be compressed in a\r
-# single compression operation in order to achieve better\r
-# overall compression.\r
-#\r
-\r
APRIORI DXE {\r
+ INF MdeModulePkg/Universal/DevicePathDxe/DevicePathDxe.inf\r
INF MdeModulePkg/Universal/PCD/Dxe/Pcd.inf\r
- INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
+ INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf\r
}\r
\r
#\r
\r
INF MdeModulePkg/Core/RuntimeDxe/RuntimeDxe.inf\r
INF MdeModulePkg/Universal/SecurityStubDxe/SecurityStubDxe.inf\r
-INF IntelFrameworkModulePkg/Universal/DataHubDxe/DataHubDxe.inf\r
-INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf
-INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
+INF MdeModulePkg/Universal/EbcDxe/EbcDxe.inf\r
INF PcAtChipsetPkg/8259InterruptControllerDxe/8259.inf\r
INF UefiCpuPkg/CpuIo2Dxe/CpuIo2Dxe.inf\r
INF UefiCpuPkg/CpuDxe/CpuDxe.inf\r
INF MdeModulePkg/Universal/Metronome/Metronome.inf\r
INF PcAtChipsetPkg/PcatRealTimeClockRuntimeDxe/PcatRealTimeClockRuntimeDxe.inf\r
\r
+INF OvmfPkg/BlockMmioToBlockIoDxe/BlockIo.inf\r
+INF OvmfPkg/VirtioPciDeviceDxe/VirtioPciDeviceDxe.inf\r
+INF OvmfPkg/VirtioBlkDxe/VirtioBlk.inf\r
+INF OvmfPkg/VirtioScsiDxe/VirtioScsi.inf\r
+INF OvmfPkg/QemuFlashFvbServicesRuntimeDxe/FvbServicesRuntimeDxe.inf\r
INF OvmfPkg/EmuVariableFvbRuntimeDxe/Fvb.inf\r
INF MdeModulePkg/Universal/FaultTolerantWriteDxe/FaultTolerantWriteDxe.inf\r
-INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
+\r
+!if $(SECURE_BOOT_ENABLE) == TRUE\r
+ INF SecurityPkg/VariableAuthenticated/RuntimeDxe/VariableRuntimeDxe.inf\r
+ INF OvmfPkg/SecureBootConfigDxe/SecureBootConfigDxe.inf\r
+!else\r
+ INF MdeModulePkg/Universal/Variable/RuntimeDxe/VariableRuntimeDxe.inf\r
+!endif\r
+\r
INF MdeModulePkg/Universal/WatchdogTimerDxe/WatchdogTimer.inf\r
INF MdeModulePkg/Universal/MonotonicCounterRuntimeDxe/MonotonicCounterRuntimeDxe.inf\r
INF MdeModulePkg/Universal/CapsuleRuntimeDxe/CapsuleRuntimeDxe.inf\r
INF PcAtChipsetPkg/Bus/Pci/IdeControllerDxe/IdeControllerDxe.inf\r
INF MdeModulePkg/Universal/HiiDatabaseDxe/HiiDatabaseDxe.inf\r
INF MdeModulePkg/Universal/SetupBrowserDxe/SetupBrowserDxe.inf\r
+INF MdeModulePkg/Universal/DisplayEngineDxe/DisplayEngineDxe.inf\r
+INF MdeModulePkg/Universal/MemoryTest/NullMemoryTestDxe/NullMemoryTestDxe.inf\r
\r
INF PcAtChipsetPkg/IsaAcpiDxe/IsaAcpi.inf\r
INF IntelFrameworkModulePkg/Bus/Isa/IsaBusDxe/IsaBusDxe.inf\r
+\r
+!ifndef $(SOURCE_DEBUG_ENABLE)\r
INF IntelFrameworkModulePkg/Bus/Isa/IsaSerialDxe/IsaSerialDxe.inf\r
+!endif\r
+\r
INF IntelFrameworkModulePkg/Bus/Isa/Ps2KeyboardDxe/Ps2keyboardDxe.inf\r
INF IntelFrameworkModulePkg/Bus/Isa/IsaFloppyDxe/IsaFloppyDxe.inf\r
\r
+INF MdeModulePkg/Universal/SmbiosDxe/SmbiosDxe.inf\r
+INF OvmfPkg/SmbiosPlatformDxe/SmbiosPlatformDxe.inf\r
+\r
INF MdeModulePkg/Universal/Acpi/AcpiTableDxe/AcpiTableDxe.inf\r
-INF MdeModulePkg/Universal/Acpi/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
+INF OvmfPkg/AcpiPlatformDxe/AcpiPlatformDxe.inf\r
INF RuleOverride=ACPITABLE OvmfPkg/AcpiTables/AcpiTables.inf\r
\r
-FILE DRIVER = 961578FE-B6B7-44c3-AF35-6BC705CD2B1F {\r
- SECTION PE32 = FatBinPkg/EnhancedFatDxe/X64/Fat.efi\r
- }\r
+INF RuleOverride = BINARY USE = X64 FatBinPkg/EnhancedFatDxe/Fat.inf\r
\r
-FILE APPLICATION = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdShellFile) {\r
- SECTION PE32 = EdkShellBinPkg/FullShell/X64/Shell_full.efi\r
- }\r
+!ifndef $(USE_OLD_SHELL)\r
+INF ShellPkg/Application/Shell/Shell.inf\r
+!else\r
+INF RuleOverride = BINARY USE = X64 EdkShellBinPkg/FullShell/FullShell.inf\r
+!endif\r
\r
FILE FREEFORM = PCD(gEfiIntelFrameworkModulePkgTokenSpaceGuid.PcdLogoFile) {\r
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
- SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
- }\r
+ SECTION RAW = MdeModulePkg/Logo/Logo.bmp\r
+}\r
+\r
+#\r
+# Network modules\r
+#\r
+!if $(E1000_ENABLE)\r
+ FILE DRIVER = 5D695E11-9B3F-4b83-B25F-4A8D5D69BE07 {\r
+ SECTION PE32 = Intel3.5/EFIX64/E3507X2.EFI\r
}\r
+!endif\r
+ INF MdeModulePkg/Universal/Network/SnpDxe/SnpDxe.inf\r
+ INF MdeModulePkg/Universal/Network/DpcDxe/DpcDxe.inf\r
+ INF MdeModulePkg/Universal/Network/MnpDxe/MnpDxe.inf\r
+ INF MdeModulePkg/Universal/Network/VlanConfigDxe/VlanConfigDxe.inf\r
+ INF MdeModulePkg/Universal/Network/ArpDxe/ArpDxe.inf\r
+ INF MdeModulePkg/Universal/Network/Dhcp4Dxe/Dhcp4Dxe.inf\r
+ INF MdeModulePkg/Universal/Network/Ip4ConfigDxe/Ip4ConfigDxe.inf\r
+ INF MdeModulePkg/Universal/Network/Ip4Dxe/Ip4Dxe.inf\r
+ INF MdeModulePkg/Universal/Network/Mtftp4Dxe/Mtftp4Dxe.inf\r
+ INF MdeModulePkg/Universal/Network/Tcp4Dxe/Tcp4Dxe.inf\r
+ INF MdeModulePkg/Universal/Network/Udp4Dxe/Udp4Dxe.inf\r
+ INF MdeModulePkg/Universal/Network/UefiPxeBcDxe/UefiPxeBcDxe.inf\r
+ INF MdeModulePkg/Universal/Network/IScsiDxe/IScsiDxe.inf\r
+ INF OvmfPkg/VirtioNetDxe/VirtioNet.inf\r
+\r
+#\r
+# Usb Support\r
+#\r
+INF MdeModulePkg/Bus/Pci/UhciDxe/UhciDxe.inf\r
+INF MdeModulePkg/Bus/Pci/EhciDxe/EhciDxe.inf\r
+INF MdeModulePkg/Bus/Usb/UsbBusDxe/UsbBusDxe.inf\r
+INF MdeModulePkg/Bus/Usb/UsbKbDxe/UsbKbDxe.inf\r
+INF MdeModulePkg/Bus/Usb/UsbMassStorageDxe/UsbMassStorageDxe.inf\r
+\r
+!ifdef $(CSM_ENABLE)\r
+INF IntelFrameworkModulePkg/Csm/BiosThunk/VideoDxe/VideoDxe.inf\r
+INF IntelFrameworkModulePkg/Csm/LegacyBiosDxe/LegacyBiosDxe.inf\r
+INF RuleOverride=CSM OvmfPkg/Csm/Csm16/Csm16.inf\r
+!endif\r
+\r
+INF OvmfPkg/QemuVideoDxe/QemuVideoDxe.inf\r
\r
################################################################################\r
\r
-[FV.MAINFV]\r
+[FV.FVMAIN_COMPACT]\r
FvAlignment = 16\r
ERASE_POLARITY = 1\r
MEMORY_MAPPED = TRUE\r
READ_LOCK_CAP = TRUE\r
READ_LOCK_STATUS = TRUE\r
\r
-#\r
-# Files to be placed in MAINFV\r
-#\r
-# This firmware volume will have all the files placed in it which\r
-# must not be compressed at the initial boot phase. The only\r
-# exception to this is the compressed 'DXEFV'.\r
-#\r
-\r
-APRIORI PEI {\r
- INF MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
-}\r
-\r
-#\r
-# SEC Phase modules\r
-#\r
-INF OvmfPkg/Sec/SecMain.inf\r
-\r
-#\r
-# PEI Phase modules\r
-#\r
-INF MdeModulePkg/Core/Pei/PeiMain.inf\r
-INF RuleOverride=NORELOC MdeModulePkg/Universal/PCD/Pei/Pcd.inf\r
-INF RuleOverride=NORELOC IntelFrameworkModulePkg/Universal/StatusCode/Pei/StatusCodePei.inf\r
-INF RuleOverride=NORELOC OvmfPkg/PlatformPei/PlatformPei.inf\r
-INF MdeModulePkg/Core/DxeIplPeim/DxeIpl.inf\r
-\r
-#\r
-# This file contains the compressed 'DXEFV', which is compressed\r
-# in a single compression operation in order to achieve better\r
-# overall compression.\r
-#\r
-FILE FV_IMAGE = 20bc8ac9-94d1-4208-ab28-5d673fd73486 {\r
- SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE { # LzmaCompress\r
- SECTION FV_IMAGE = DXEFV\r
+FILE FV_IMAGE = 9E21FD93-9C72-4c15-8C4B-E77F1DB2D792 {\r
+ SECTION GUIDED EE4E5898-3914-4259-9D6E-DC7BD79403CF PROCESSING_REQUIRED = TRUE {\r
+ #\r
+ # These firmware volumes will have files placed in them uncompressed,\r
+ # and then both firmware volumes will be compressed in a single\r
+ # compression operation in order to achieve better overall compression.\r
+ #\r
+ SECTION FV_IMAGE = PEIFV\r
+ SECTION FV_IMAGE = DXEFV\r
}\r
}\r
\r
-FILE RAW = 1BA0062E-C779-4582-8566-336AE8F78F09 {\r
- SECTION RAW = OvmfPkg/ResetVector/Bin/ResetVector.ia32.raw\r
- }\r
-\r
-\r
-################################################################################\r
-#\r
-# Rules are use with the [FV] section's module INF type to define\r
-# how an FFS file is created for a given INF file. The following Rule are the default\r
-# rules for the different module type. User can add the customized rules to define the\r
-# content of the FFS file.\r
-#\r
################################################################################\r
\r
-[Rule.Common.PEI_CORE]\r
- FILE PEI_CORE = $(NAMED_GUID) {\r
- PE32 PE32 Align=32 |.efi\r
- UI STRING ="$(MODULE_NAME)" Optional\r
- VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
-\r
[Rule.Common.SEC]\r
FILE SEC = $(NAMED_GUID) {\r
- PE32 PE32 |.efi\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING ="$(MODULE_NAME)" Optional\r
VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
-[Rule.Common.PEIM.NORELOC]\r
- FILE PEIM = $(NAMED_GUID) RELOCS_STRIPPED {\r
- PEI_DEPEX PEI_DEPEX Optional |.depex\r
- TE TE |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
+[Rule.Common.PEI_CORE]\r
+ FILE PEI_CORE = $(NAMED_GUID) {\r
+ PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
+ UI STRING ="$(MODULE_NAME)" Optional\r
+ VERSION STRING ="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
[Rule.Common.PEIM]\r
FILE PEIM = $(NAMED_GUID) {\r
- PEI_DEPEX PEI_DEPEX Optional |.depex\r
- PE32 PE32 Align=32 |.efi\r
+ PEI_DEPEX PEI_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 Align=32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
-[Rule.Common.PEIM.TIANOCOMPRESSED]\r
- FILE PEIM = $(NAMED_GUID) {\r
- PEI_DEPEX PEI_DEPEX Optional |.depex\r
- GUIDED A31280AD-481E-41B6-95E8-127F4C984779 PROCESSING_REQUIRED = TRUE {\r
- PE32 PE32 |.efi\r
- UI STRING="$(MODULE_NAME)" Optional\r
- VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
- }\r
- }\r
-\r
[Rule.Common.DXE_CORE]\r
FILE DXE_CORE = $(NAMED_GUID) {\r
- PE32 PE32 |.efi\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
-[Rule.Common.UEFI_DRIVER]\r
+[Rule.Common.DXE_DRIVER]\r
FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
-[Rule.Common.DXE_DRIVER]\r
+[Rule.Common.DXE_RUNTIME_DRIVER]\r
FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
-[Rule.Common.DXE_RUNTIME_DRIVER]\r
+[Rule.Common.UEFI_DRIVER]\r
FILE DRIVER = $(NAMED_GUID) {\r
- DXE_DEPEX DXE_DEPEX Optional |.depex\r
- PE32 PE32 |.efi\r
+ DXE_DEPEX DXE_DEPEX Optional $(INF_OUTPUT)/$(MODULE_NAME).depex\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
+[Rule.Common.UEFI_DRIVER.BINARY]\r
+ FILE DRIVER = $(NAMED_GUID) {\r
+ DXE_DEPEX DXE_DEPEX Optional |.depex\r
+ PE32 PE32 |.efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
+ }\r
+\r
[Rule.Common.UEFI_APPLICATION]\r
FILE APPLICATION = $(NAMED_GUID) {\r
- PE32 PE32 |.efi\r
+ PE32 PE32 $(INF_OUTPUT)/$(MODULE_NAME).efi\r
UI STRING="$(MODULE_NAME)" Optional\r
VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
}\r
\r
+[Rule.Common.UEFI_APPLICATION.BINARY]\r
+ FILE APPLICATION = $(NAMED_GUID) {\r
+ PE32 PE32 |.efi\r
+ UI STRING="$(MODULE_NAME)" Optional\r
+ VERSION STRING="$(INF_VERSION)" Optional BUILD_NUM=$(BUILD_NUMBER)\r
+ }\r
+\r
[Rule.Common.USER_DEFINED.ACPITABLE]\r
FILE FREEFORM = $(NAMED_GUID) {\r
RAW ACPI |.acpi\r
RAW ASL |.aml\r
}\r
\r
+[Rule.Common.USER_DEFINED.CSM]\r
+ FILE FREEFORM = $(NAMED_GUID) {\r
+ RAW BIN |.bin\r
+ }\r
+\r
[Rule.Common.SEC.RESET_VECTOR]\r
FILE RAW = $(NAMED_GUID) {\r
RAW RAW |.raw\r
}\r
-\r
-[OptionRom.CirrusLogic5446]\r
-INF OptionRomPkg/CirrusLogic5430Dxe/CirrusLogic5430Dxe.inf {\r
- PCI_DEVICE_ID = 0x00B8\r
- }\r
-\r
projects / mirror_edk2.git / blobdiff