Include\r
\r
[LibraryClasses]\r
- ## @libraryclass Definitions for common TPM commands as library API for TPM\r
- # module use.\r
+ ## @libraryclass Provides hash interfaces from different implementations.\r
+ # \r
HashLib|Include/Library/HashLib.h\r
+ \r
+ ## @libraryclass Provides a platform specific interface to detect physically present user.\r
+ #\r
PlatformSecureLib|Include/Library/PlatformSecureLib.h\r
+ \r
+ ## @libraryclass Provides interfaces to handle TPM 1.2 request.\r
+ #\r
TcgPhysicalPresenceLib|Include/Library/TcgPhysicalPresenceLib.h\r
+ \r
+ ## @libraryclass Provides interfaces for other modules to send TPM 2.0 command.\r
+ #\r
Tpm2CommandLib|Include/Library/Tpm2CommandLib.h\r
+ \r
+ ## @libraryclass Provides interfaces on how to access TPM 2.0 hardware device.\r
+ #\r
Tpm2DeviceLib|Include/Library/Tpm2DeviceLib.h\r
+ \r
+ ## @libraryclass Provides interfaces for other modules to send TPM 1.2 command.\r
+ #\r
Tpm12CommandLib|Include/Library/Tpm12CommandLib.h\r
+ \r
+ ## @libraryclass Provides interfaces on how to access TPM 1.2 hardware device.\r
+ #\r
Tpm12DeviceLib|Include/Library/Tpm12DeviceLib.h\r
+ \r
+ ## @libraryclass Provides TPM Interface Specification (TIS) interfaces for TPM command.\r
+ #\r
TpmCommLib|Include/Library/TpmCommLib.h\r
+ \r
+ ## @libraryclass Provides common interfaces about TPM measurement for other modules.\r
+ #\r
TpmMeasurementLib|Include/Library/TpmMeasurementLib.h\r
+ \r
+ ## @libraryclass Provides interfaces to handle TPM 2.0 request.\r
+ #\r
TrEEPhysicalPresenceLib|Include/Library/TrEEPhysicalPresenceLib.h\r
\r
[Guids]\r
## Security package token space guid\r
# Include/Guid/SecurityPkgTokenSpace.h\r
gEfiSecurityPkgTokenSpaceGuid = { 0xd3fb176, 0x9569, 0x4d51, { 0xa3, 0xef, 0x7d, 0x61, 0xc6, 0x4f, 0xea, 0xba }}\r
+ \r
## Guid acted as the authenticated variable store header's signature, and to specify the variable list entries put in the EFI system table.\r
# Include/Guid/AuthenticatedVariableFormat.h\r
gEfiAuthenticatedVariableGuid = { 0xaaf32c78, 0x947b, 0x439a, { 0xa1, 0x80, 0x2e, 0x14, 0x4e, 0xc3, 0x77, 0x92 } }\r
\r
+ ## GUID used to "SecureBootEnable" variable for the Secure Boot feature enable/disable.\r
+ # This variable is used for allowing a physically present user to disable Secure Boot via firmware setup without the possession of PKpriv.\r
# Include/Guid/AuthenticatedVariableFormat.h\r
gEfiSecureBootEnableDisableGuid = { 0xf0a30bc7, 0xaf08, 0x4556, { 0x99, 0xc4, 0x0, 0x10, 0x9, 0xc9, 0x3a, 0x44 } }\r
\r
+ ## GUID used to "CustomMode" variable for two Secure Boot modes feature: "Custom" and "Standard".\r
+ # Standard Secure Boot mode is the default mode as UEFI Spec's description.\r
+ # Custom Secure Boot mode allows for more flexibility as specified in the following:\r
+ # Can enroll or delete PK without existing PK's private key.\r
+ # Can enroll or delete KEK without existing PK's private key.\r
+ # Can enroll or delete signature from DB/DBX without KEK's private key.\r
# Include/Guid/AuthenticatedVariableFormat.h\r
gEfiCustomModeEnableGuid = { 0xc076ec0c, 0x7028, 0x4399, { 0xa0, 0x72, 0x71, 0xee, 0x5c, 0x44, 0x8b, 0x9f } }\r
\r
+ ## GUID used to "VendorKeysNv" variable to record the out of band secure boot keys modification.\r
+ # This variable is a read-only NV varaible that indicates whether someone other than the platform vendor has used a \r
+ # mechanism not defined by the UEFI Specification to transition the system to setup mode or to update secure boot keys.\r
# Include/Guid/AuthenticatedVariableFormat.h\r
gEfiVendorKeysNvGuid = { 0x9073e4e0, 0x60ec, 0x4b6e, { 0x99, 0x3, 0x4c, 0x22, 0x3c, 0x26, 0xf, 0x3c } }\r
\r
+ ## GUID used to "certdb" variable to store the signer's certificates for common variables with EFI_VARIABLE_TIME_BASED_AUTHENTICATED_WRITE_ACCESS attribute.\r
# Include/Guid/AuthenticatedVariableFormat.h\r
gEfiCertDbGuid = { 0xd9bee56e, 0x75dc, 0x49d9, { 0xb4, 0xd7, 0xb5, 0x34, 0x21, 0xf, 0x63, 0x7a } }\r
\r
- ## Include/Guid/TcgEventHob.h\r
+ ## Hob GUID used to pass a TCG_PCR_EVENT from a TPM PEIM to a TPM DXE Driver.\r
+ # Include/Guid/TcgEventHob.h\r
gTcgEventEntryHobGuid = { 0x2b9ffb52, 0x1b13, 0x416f, { 0xa8, 0x7b, 0xbc, 0x93, 0xd, 0xef, 0x92, 0xa8 }}\r
\r
- ## Include/Guid/MeasuredFvHob.h\r
+ ## HOB GUID used to pass all PEI measured FV info to DXE Driver.\r
+ # Include/Guid/MeasuredFvHob.h\r
gMeasuredFvHobGuid = { 0xb2360b42, 0x7173, 0x420a, { 0x86, 0x96, 0x46, 0xca, 0x6b, 0xab, 0x10, 0x60 }}\r
\r
- ## Include/Guid/PhysicalPresenceData.h\r
+ ## GUID used to "PhysicalPresence" variable and "PhysicalPresenceFlags" variable for TPM request and response.\r
+ # Include/Guid/PhysicalPresenceData.h\r
gEfiPhysicalPresenceGuid = { 0xf6499b1, 0xe9ad, 0x493d, { 0xb9, 0xc2, 0x2f, 0x90, 0x81, 0x5c, 0x6c, 0xbc }}\r
\r
- ## Include/Guid/PwdCredentialProviderHii.h\r
+ ## GUID used for form browser, password credential and provider identifier.\r
+ # Include/Guid/PwdCredentialProviderHii.h\r
gPwdCredentialProviderGuid = { 0x78b9ec8b, 0xc000, 0x46c5, { 0xac, 0x93, 0x24, 0xa0, 0xc1, 0xbb, 0x0, 0xce }}\r
\r
- ## Include/Guid/UsbCredentialProviderHii.h\r
+ ## GUID used for form browser, USB credential and provider identifier.\r
+ # Include/Guid/UsbCredentialProviderHii.h\r
gUsbCredentialProviderGuid = { 0xd0849ed1, 0xa88c, 0x4ba6, { 0xb1, 0xd6, 0xab, 0x50, 0xe2, 0x80, 0xb7, 0xa9 }}\r
\r
- ## Include/Guid/UserIdentifyManagerHii.h\r
+ ## GUID used for FormSet guid and user profile variable.\r
+ # Include/Guid/UserIdentifyManagerHii.h\r
gUserIdentifyManagerGuid = { 0x3ccd3dd8, 0x8d45, 0x4fed, { 0x96, 0x2d, 0x2b, 0x38, 0xcd, 0x82, 0xb3, 0xc4 }}\r
\r
- ## Include/Guid/UserProfileManagerHii.h\r
+ ## GUID used for FormSet.\r
+ # Include/Guid/UserProfileManagerHii.h\r
gUserProfileManagerGuid = { 0xc35f272c, 0x97c2, 0x465a, { 0xa2, 0x16, 0x69, 0x6b, 0x66, 0x8a, 0x8c, 0xfe }}\r
\r
- ## Include/Guid/TcgConfigHii.h\r
+ ## GUID used for FormSet.\r
+ # Include/Guid/TcgConfigHii.h\r
gTcgConfigFormSetGuid = { 0xb0f901e4, 0xc424, 0x45de, { 0x90, 0x81, 0x95, 0xe2, 0xb, 0xde, 0x6f, 0xb5 }}\r
\r
- ## Include/Guid/SecureBootConfigHii.h\r
+ ## GUID used for FormSet.\r
+ # Include/Guid/SecureBootConfigHii.h\r
gSecureBootConfigFormSetGuid = { 0x5daf50a5, 0xea81, 0x4de2, {0x8f, 0x9b, 0xca, 0xbd, 0xa9, 0xcf, 0x5c, 0x14}}\r
- \r
- ## Include/Guid/TrEEPhysicalPresenceData.h\r
+\r
+ ## GUID used to "TrEEPhysicalPresence" variable and "TrEEPhysicalPresenceFlags" variable for TPM2 request and response.\r
+ # Include/Guid/TrEEPhysicalPresenceData.h\r
gEfiTrEEPhysicalPresenceGuid = { 0xf24643c2, 0xc622, 0x494e, { 0x8a, 0xd, 0x46, 0x32, 0x57, 0x9c, 0x2d, 0x5b }}\r
\r
- ## Include/Guid/TpmInstance.h\r
+ ## GUID value used for PcdTpmInstanceGuid to indicate TPM is disabled.\r
+ # Include/Guid/TpmInstance.h\r
gEfiTpmDeviceInstanceNoneGuid = { 0x00000000, 0x0000, 0x0000, { 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 } }\r
+ \r
+ ## GUID value used for PcdTpmInstanceGuid to indicate TPM 1.2 device is selected to support.\r
+ # Include/Guid/TpmInstance.h\r
gEfiTpmDeviceInstanceTpm12Guid = { 0x8b01e5b6, 0x4f19, 0x46e8, { 0xab, 0x93, 0x1c, 0x53, 0x67, 0x1b, 0x90, 0xcc } }\r
+ \r
+ ## GUID value used for PcdTpmInstanceGuid to indicate discrete TPM 2.0 device is selected to support.\r
+ # Include/Guid/TpmInstance.h\r
gEfiTpmDeviceInstanceTpm20DtpmGuid = { 0x286bf25a, 0xc2c3, 0x408c, { 0xb3, 0xb4, 0x25, 0xe6, 0x75, 0x8b, 0x73, 0x17 } }\r
+ \r
+ ## GUID used to select supported TPM instance from UI.\r
+ # Include/Guid/TpmInstance.h\r
gEfiTpmDeviceSelectedGuid = { 0x7f4158d3, 0x74d, 0x456d, { 0x8c, 0xb2, 0x1, 0xf9, 0xc8, 0xf7, 0x9d, 0xaa } }\r
\r
- ## Include/Guid/TrEEConfigHii.h\r
+ ## GUID used for FormSet and config variable.\r
+ # Include/Guid/TrEEConfigHii.h\r
gTrEEConfigFormSetGuid = {0xc54b425f, 0xaa79, 0x48b4, { 0x98, 0x1f, 0x99, 0x8b, 0x3c, 0x4b, 0x64, 0x1c }}\r
\r
[Ppis]\r
# If 1, TCG platform type is server.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmPlatformClass|0|UINT8|0x00000006\r
\r
- ## The PCD is used to control whether to support hiding the TPM.\r
- # If TRUE, PcdHideTpm controls whether to hide the TPM.\r
- gEfiSecurityPkgTokenSpaceGuid.PcdHideTpmSupport|FALSE|BOOLEAN|0x00000007\r
- \r
-[PcdsDynamic, PcdsDynamicEx]\r
- ## The PCD is used to control whether to hide the TPM.\r
- gEfiSecurityPkgTokenSpaceGuid.PcdHideTpm|FALSE|BOOLEAN|0x00010002\r
-\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD indicates the presence or absence of the platform operator.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmPhysicalPresence|TRUE|BOOLEAN|0x00010001\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD indicates whether to set TPM physicalPresenceLifetimeLock bit.\r
- ## Once this bit is set, it can not be cleared (It is locked for TPM life time).\r
+ # Once this bit is set, it can not be cleared (It is locked for TPM life time).\r
gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceLifetimeLock|FALSE|BOOLEAN|0x00010003\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD is used to specify the default value for physicalPresenceCMDEnable bit when setting physicalPresenceLifetimeLock bit.\r
- ## If PcdPhysicalPresenceCmdEnable is set to TRUE, physicalPresenceCMDEnable bit will be set, else this bit will be cleared.\r
+ # If PcdPhysicalPresenceCmdEnable is set to TRUE, physicalPresenceCMDEnable bit will be set, else this bit will be cleared.\r
gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceCmdEnable|TRUE|BOOLEAN|0x00010004\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD is used to specify the default value for physicalPresenceHWEnable bit when setting physicalPresenceLifetimeLock bit.\r
- ## If PcdPhysicalPresenceHwEnable is set to TRUE, physicalPresenceHWEnable bit will be set, else this bit will be cleared.\r
+ # If PcdPhysicalPresenceHwEnable is set to TRUE, physicalPresenceHWEnable bit will be set, else this bit will be cleared.\r
gEfiSecurityPkgTokenSpaceGuid.PcdPhysicalPresenceHwEnable|TRUE|BOOLEAN|0x00010005\r
\r
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]\r
## This PCD indicates if debugger exists.\r
gEfiSecurityPkgTokenSpaceGuid.PcdFirmwareDebuggerInitialized|FALSE|BOOLEAN|0x00010009\r
\r
- ## This PCD indicates the TPM2 initializatin policy.\r
- ## 0: No initialization needed - most likely used for chipset SRTM sloution, in which TPM is already initialized.\r
- ## 1: Initialization needed.\r
+ ## This PCD indicates the TPM2 initialization policy.\r
+ # 0: No initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.\r
+ # 1: Initialization needed.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2InitializationPolicy|1|UINT8|0x0001000A\r
\r
- ## This PCD indicates the TPM initializatin policy.\r
- ## 0: No initialization needed - most likely used for chipset SRTM sloution, in which TPM is already initialized.\r
- ## 1: Initialization needed.\r
+ ## This PCD indicates the TPM initialization policy.\r
+ # 0: No initialization needed - most likely used for chipset SRTM solution, in which TPM is already initialized.\r
+ # 1: Initialization needed.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmInitializationPolicy|1|UINT8|0x0001000B\r
\r
## This PCD indicates the TPM2 SelfTest policy.\r
- ## 0: No SelfTest needed - most likely used for fTPM, because it might already be tested.\r
- ## 1: SelfTest needed.\r
+ # 0: No SelfTest needed - most likely used for fTPM, because it might already be tested.\r
+ # 1: SelfTest needed.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2SelfTestPolicy|1|UINT8|0x0001000C\r
\r
## This PCD indicates the TPM2 SCRTM policy.\r
- ## 0: No SCRTM needed - In this case, it is already done.\r
- ## 1: SCRTM done by BIOS.\r
+ # 0: No SCRTM needed - In this case, it is already done.\r
+ # 1: SCRTM done by BIOS.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2ScrtmPolicy|1|UINT8|0x0001000D\r
\r
## This PCD indicates the TPM SCRTM policy.\r
- ## 0: No SCRTM needed - In this case, it is already done.\r
- ## 1: SCRTM done by BIOS.\r
+ # 0: No SCRTM needed - In this case, it is already done.\r
+ # 1: SCRTM done by BIOS.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmScrtmPolicy|1|UINT8|0x0001000E\r
\r
## Guid name to identify TPM instance\r
- ## TPM_DEVICE_INTERFACE_NONE means disable\r
- ## TPM_DEVICE_INTERFACE_TPM12 means TPM1.2 DTPM\r
- ## TPM_DEVICE_INTERFACE_DTPM2 means TPM2 DTPM\r
+ # TPM_DEVICE_INTERFACE_NONE means disable\r
+ # TPM_DEVICE_INTERFACE_TPM12 means TPM1.2 DTPM\r
+ # TPM_DEVICE_INTERFACE_DTPM2 means TPM2 DTPM\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmInstanceGuid |{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }|VOID*|0x0001000F\r
\r
## This PCD indicates the TPM2 Hash mask.\r
- ## BIT0: SHA1\r
- ## BIT1: SHA256\r
- ## BIT2: SHA384\r
- ## BIT3: SHA512\r
- ## If this bit is set, that means this algorithm is needed to extend to PCR.\r
- ## If this bit is clear, that means this algorithm is NOT needed to extend to PCR.\r
- ## 0xFFFFFFFF means extend all.\r
+ # BIT0: SHA1\r
+ # BIT1: SHA256\r
+ # BIT2: SHA384\r
+ # BIT3: SHA512\r
+ # If this bit is set, that means this algorithm is needed to extend to PCR.\r
+ # If this bit is clear, that means this algorithm is NOT needed to extend to PCR.\r
+ # 0xFFFFFFFF means extend all.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpm2HashMask|0xFFFFFFFF|UINT32|0x00010010\r
\r
## This PCD indicates if BIOS auto detect TPM1.2 or dTPM2.0.\r
- ## 0: No auto detection.\r
- ## 1: Auto detection.\r
+ # 0: No auto detection.\r
+ # 1: Auto detection.\r
gEfiSecurityPkgTokenSpaceGuid.PcdTpmAutoDetection|TRUE|BOOLEAN|0x00010011\r
\r
## This PCD indicates TPM base address.\r
projects / mirror_edk2.git / blobdiff