+++ /dev/null
-/* $NetBSD: softfloat.h,v 1.10 2013/04/24 18:04:46 matt Exp $ */\r
-\r
-/* This is a derivative work. */\r
-\r
-/*\r
-===============================================================================\r
-\r
-This C header file is part of the SoftFloat IEC/IEEE Floating-point\r
-Arithmetic Package, Release 2a.\r
-\r
-Written by John R. Hauser. This work was made possible in part by the\r
-International Computer Science Institute, located at Suite 600, 1947 Center\r
-Street, Berkeley, California 94704. Funding was partially provided by the\r
-National Science Foundation under grant MIP-9311980. The original version\r
-of this code was written as part of a project to build a fixed-point vector\r
-processor in collaboration with the University of California at Berkeley,\r
-overseen by Profs. Nelson Morgan and John Wawrzynek. More information\r
-is available through the Web page `http://HTTP.CS.Berkeley.EDU/~jhauser/\r
-arithmetic/SoftFloat.html'.\r
-\r
-THIS SOFTWARE IS DISTRIBUTED AS IS, FOR FREE. Although reasonable effort\r
-has been made to avoid it, THIS SOFTWARE MAY CONTAIN FAULTS THAT WILL AT\r
-TIMES RESULT IN INCORRECT BEHAVIOR. USE OF THIS SOFTWARE IS RESTRICTED TO\r
-PERSONS AND ORGANIZATIONS WHO CAN AND WILL TAKE FULL RESPONSIBILITY FOR ANY\r
-AND ALL LOSSES, COSTS, OR OTHER PROBLEMS ARISING FROM ITS USE.\r
-\r
-Derivative works are acceptable, even for commercial purposes, so long as\r
-(1) they include prominent notice that the work is derivative, and (2) they\r
-include prominent notice akin to these four paragraphs for those parts of\r
-this code that are retained.\r
-\r
-===============================================================================\r
-*/\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-The macro `FLOATX80' must be defined to enable the extended double-precision\r
-floating-point format `floatx80'. If this macro is not defined, the\r
-`floatx80' type will not be defined, and none of the functions that either\r
-input or output the `floatx80' type will be defined. The same applies to\r
-the `FLOAT128' macro and the quadruple-precision format `float128'.\r
--------------------------------------------------------------------------------\r
-*/\r
-/* #define FLOATX80 */\r
-#define FLOAT128\r
-\r
-#include <stdint.h>\r
-#include <machine/ieeefp.h>\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE floating-point types.\r
--------------------------------------------------------------------------------\r
-*/\r
-typedef unsigned int float32;\r
-typedef unsigned long long float64;\r
-#ifdef FLOATX80\r
-typedef struct {\r
- unsigned short high;\r
- unsigned long long low;\r
-} floatx80;\r
-#endif\r
-#ifdef FLOAT128\r
-typedef struct {\r
- unsigned long long high, low;\r
-} float128;\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE floating-point underflow tininess-detection mode.\r
--------------------------------------------------------------------------------\r
-*/\r
-#ifndef SOFTFLOAT_FOR_GCC\r
-extern int float_detect_tininess;\r
-#endif\r
-enum {\r
- float_tininess_after_rounding = 0,\r
- float_tininess_before_rounding = 1\r
-};\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE floating-point rounding mode.\r
--------------------------------------------------------------------------------\r
-*/\r
-extern fp_rnd float_rounding_mode;\r
-#define float_round_nearest_even FP_RN\r
-#define float_round_to_zero FP_RZ\r
-#define float_round_down FP_RM\r
-#define float_round_up FP_RP\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE floating-point exception flags.\r
--------------------------------------------------------------------------------\r
-*/\r
-extern fp_except float_exception_flags;\r
-extern fp_except float_exception_mask;\r
-enum {\r
- float_flag_inexact = FP_X_IMP,\r
- float_flag_underflow = FP_X_UFL,\r
- float_flag_overflow = FP_X_OFL,\r
- float_flag_divbyzero = FP_X_DZ,\r
- float_flag_invalid = FP_X_INV\r
-};\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Routine to raise any or all of the software IEC/IEEE floating-point\r
-exception flags.\r
--------------------------------------------------------------------------------\r
-*/\r
-void float_raise( fp_except );\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE integer-to-floating-point conversion routines.\r
--------------------------------------------------------------------------------\r
-*/\r
-float32 int32_to_float32( int32 );\r
-float32 uint32_to_float32( uint32 );\r
-float64 int32_to_float64( int32 );\r
-float64 uint32_to_float64( uint32 );\r
-#ifdef FLOATX80\r
-floatx80 int32_to_floatx80( int32 );\r
-floatx80 uint32_to_floatx80( uint32 );\r
-#endif\r
-#ifdef FLOAT128\r
-float128 int32_to_float128( int32 );\r
-float128 uint32_to_float128( uint32 );\r
-#endif\r
-#ifndef SOFTFLOAT_FOR_GCC /* __floatdi?f is in libgcc2.c */\r
-float32 int64_to_float32( long long );\r
-float64 int64_to_float64( long long );\r
-#ifdef FLOATX80\r
-floatx80 int64_to_floatx80( long long );\r
-#endif\r
-#ifdef FLOAT128\r
-float128 int64_to_float128( long long );\r
-#endif\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE single-precision conversion routines.\r
--------------------------------------------------------------------------------\r
-*/\r
-int float32_to_int32( float32 );\r
-int float32_to_int32_round_to_zero( float32 );\r
-#if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS)\r
-unsigned int float32_to_uint32_round_to_zero( float32 );\r
-#endif\r
-#ifndef SOFTFLOAT_FOR_GCC /* __fix?fdi provided by libgcc2.c */\r
-long long float32_to_int64( float32 );\r
-long long float32_to_int64_round_to_zero( float32 );\r
-#endif\r
-float64 float32_to_float64( float32 );\r
-#ifdef FLOATX80\r
-floatx80 float32_to_floatx80( float32 );\r
-#endif\r
-#ifdef FLOAT128\r
-float128 float32_to_float128( float32 );\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE single-precision operations.\r
--------------------------------------------------------------------------------\r
-*/\r
-float32 float32_round_to_int( float32 );\r
-float32 float32_add( float32, float32 );\r
-float32 float32_sub( float32, float32 );\r
-float32 float32_mul( float32, float32 );\r
-float32 float32_div( float32, float32 );\r
-float32 float32_rem( float32, float32 );\r
-float32 float32_sqrt( float32 );\r
-int float32_eq( float32, float32 );\r
-int float32_le( float32, float32 );\r
-int float32_lt( float32, float32 );\r
-int float32_eq_signaling( float32, float32 );\r
-int float32_le_quiet( float32, float32 );\r
-int float32_lt_quiet( float32, float32 );\r
-#ifndef SOFTFLOAT_FOR_GCC\r
-int float32_is_signaling_nan( float32 );\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE double-precision conversion routines.\r
--------------------------------------------------------------------------------\r
-*/\r
-int float64_to_int32( float64 );\r
-int float64_to_int32_round_to_zero( float64 );\r
-#if defined(SOFTFLOAT_FOR_GCC) && defined(SOFTFLOAT_NEED_FIXUNS)\r
-unsigned int float64_to_uint32_round_to_zero( float64 );\r
-#endif\r
-#ifndef SOFTFLOAT_FOR_GCC /* __fix?fdi provided by libgcc2.c */\r
-long long float64_to_int64( float64 );\r
-long long float64_to_int64_round_to_zero( float64 );\r
-#endif\r
-float32 float64_to_float32( float64 );\r
-#ifdef FLOATX80\r
-floatx80 float64_to_floatx80( float64 );\r
-#endif\r
-#ifdef FLOAT128\r
-float128 float64_to_float128( float64 );\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE double-precision operations.\r
--------------------------------------------------------------------------------\r
-*/\r
-float64 float64_round_to_int( float64 );\r
-float64 float64_add( float64, float64 );\r
-float64 float64_sub( float64, float64 );\r
-float64 float64_mul( float64, float64 );\r
-float64 float64_div( float64, float64 );\r
-float64 float64_rem( float64, float64 );\r
-float64 float64_sqrt( float64 );\r
-int float64_eq( float64, float64 );\r
-int float64_le( float64, float64 );\r
-int float64_lt( float64, float64 );\r
-int float64_eq_signaling( float64, float64 );\r
-int float64_le_quiet( float64, float64 );\r
-int float64_lt_quiet( float64, float64 );\r
-#ifndef SOFTFLOAT_FOR_GCC\r
-int float64_is_signaling_nan( float64 );\r
-#endif\r
-\r
-#ifdef FLOATX80\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE extended double-precision conversion routines.\r
--------------------------------------------------------------------------------\r
-*/\r
-int floatx80_to_int32( floatx80 );\r
-int floatx80_to_int32_round_to_zero( floatx80 );\r
-long long floatx80_to_int64( floatx80 );\r
-long long floatx80_to_int64_round_to_zero( floatx80 );\r
-float32 floatx80_to_float32( floatx80 );\r
-float64 floatx80_to_float64( floatx80 );\r
-#ifdef FLOAT128\r
-float128 floatx80_to_float128( floatx80 );\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE extended double-precision rounding precision. Valid\r
-values are 32, 64, and 80.\r
--------------------------------------------------------------------------------\r
-*/\r
-extern int floatx80_rounding_precision;\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE extended double-precision operations.\r
--------------------------------------------------------------------------------\r
-*/\r
-floatx80 floatx80_round_to_int( floatx80 );\r
-floatx80 floatx80_add( floatx80, floatx80 );\r
-floatx80 floatx80_sub( floatx80, floatx80 );\r
-floatx80 floatx80_mul( floatx80, floatx80 );\r
-floatx80 floatx80_div( floatx80, floatx80 );\r
-floatx80 floatx80_rem( floatx80, floatx80 );\r
-floatx80 floatx80_sqrt( floatx80 );\r
-int floatx80_eq( floatx80, floatx80 );\r
-int floatx80_le( floatx80, floatx80 );\r
-int floatx80_lt( floatx80, floatx80 );\r
-int floatx80_eq_signaling( floatx80, floatx80 );\r
-int floatx80_le_quiet( floatx80, floatx80 );\r
-int floatx80_lt_quiet( floatx80, floatx80 );\r
-int floatx80_is_signaling_nan( floatx80 );\r
-\r
-#endif\r
-\r
-#ifdef FLOAT128\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE quadruple-precision conversion routines.\r
--------------------------------------------------------------------------------\r
-*/\r
-int float128_to_int32( float128 );\r
-int float128_to_int32_round_to_zero( float128 );\r
-long long float128_to_int64( float128 );\r
-long long float128_to_int64_round_to_zero( float128 );\r
-float32 float128_to_float32( float128 );\r
-float64 float128_to_float64( float128 );\r
-#ifdef FLOATX80\r
-floatx80 float128_to_floatx80( float128 );\r
-#endif\r
-\r
-/*\r
--------------------------------------------------------------------------------\r
-Software IEC/IEEE quadruple-precision operations.\r
--------------------------------------------------------------------------------\r
-*/\r
-float128 float128_round_to_int( float128 );\r
-float128 float128_add( float128, float128 );\r
-float128 float128_sub( float128, float128 );\r
-float128 float128_mul( float128, float128 );\r
-float128 float128_div( float128, float128 );\r
-float128 float128_rem( float128, float128 );\r
-float128 float128_sqrt( float128 );\r
-int float128_eq( float128, float128 );\r
-int float128_le( float128, float128 );\r
-int float128_lt( float128, float128 );\r
-int float128_eq_signaling( float128, float128 );\r
-int float128_le_quiet( float128, float128 );\r
-int float128_lt_quiet( float128, float128 );\r
-int float128_is_signaling_nan( float128 );\r
-\r
-#endif\r
projects / mirror_edk2.git / blobdiff