-/** @file
- CPU PEI Module installs CPU Multiple Processor PPI.
-
- Copyright (c) 2015, Intel Corporation. All rights reserved.<BR>
- This program and the accompanying materials
- are licensed and made available under the terms and conditions of the BSD License
- which accompanies this distribution. The full text of the license may be found at
- http://opensource.org/licenses/bsd-license.php
-
- THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
- WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
-
-**/
-
-#include "CpuMpPei.h"
-
-//
-// Global Descriptor Table (GDT)
-//
-GLOBAL_REMOVE_IF_UNREFERENCED IA32_GDT mGdtEntries[] = {
-/* selector { Global Segment Descriptor } */
-/* 0x00 */ {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, //null descriptor
-/* 0x08 */ {{0xffff, 0, 0, 0x2, 1, 0, 1, 0xf, 0, 0, 1, 1, 0}}, //linear data segment descriptor
-/* 0x10 */ {{0xffff, 0, 0, 0xf, 1, 0, 1, 0xf, 0, 0, 1, 1, 0}}, //linear code segment descriptor
-/* 0x18 */ {{0xffff, 0, 0, 0x3, 1, 0, 1, 0xf, 0, 0, 1, 1, 0}}, //system data segment descriptor
-/* 0x20 */ {{0xffff, 0, 0, 0xa, 1, 0, 1, 0xf, 0, 0, 1, 1, 0}}, //system code segment descriptor
-/* 0x28 */ {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, //spare segment descriptor
-/* 0x30 */ {{0xffff, 0, 0, 0x2, 1, 0, 1, 0xf, 0, 0, 1, 1, 0}}, //system data segment descriptor
-/* 0x38 */ {{0xffff, 0, 0, 0xa, 1, 0, 1, 0xf, 0, 1, 0, 1, 0}}, //system code segment descriptor
-/* 0x40 */ {{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}}, //spare segment descriptor
-};
-
-//
-// IA32 Gdt register
-//
-GLOBAL_REMOVE_IF_UNREFERENCED IA32_DESCRIPTOR mGdt = {
- sizeof (mGdtEntries) - 1,
- (UINTN) mGdtEntries
- };
-
-/**
- Sort the APIC ID of all processors.
-
- This function sorts the APIC ID of all processors so that processor number is
- assigned in the ascending order of APIC ID which eases MP debugging.
-
- @param PeiCpuMpData Pointer to PEI CPU MP Data
-**/
-VOID
-SortApicId (
- IN PEI_CPU_MP_DATA *PeiCpuMpData
- )
-{
- UINTN Index1;
- UINTN Index2;
- UINTN Index3;
- UINT32 ApicId;
- EFI_HEALTH_FLAGS Health;
- UINT32 ApCount;
-
- ApCount = PeiCpuMpData->CpuCount - 1;
-
- if (ApCount != 0) {
- for (Index1 = 0; Index1 < ApCount; Index1++) {
- Index3 = Index1;
- //
- // Sort key is the hardware default APIC ID
- //
- ApicId = PeiCpuMpData->CpuData[Index1].ApicId;
- for (Index2 = Index1 + 1; Index2 <= ApCount; Index2++) {
- if (ApicId > PeiCpuMpData->CpuData[Index2].ApicId) {
- Index3 = Index2;
- ApicId = PeiCpuMpData->CpuData[Index2].ApicId;
- }
- }
- if (Index3 != Index1) {
- PeiCpuMpData->CpuData[Index3].ApicId = PeiCpuMpData->CpuData[Index1].ApicId;
- PeiCpuMpData->CpuData[Index1].ApicId = ApicId;
- Health = PeiCpuMpData->CpuData[Index3].Health;
- PeiCpuMpData->CpuData[Index3].Health = PeiCpuMpData->CpuData[Index1].Health;
- PeiCpuMpData->CpuData[Index1].Health = Health;
- }
- }
-
- //
- // Get the processor number for the BSP
- //
- ApicId = GetInitialApicId ();
- for (Index1 = 0; Index1 < PeiCpuMpData->CpuCount; Index1++) {
- if (PeiCpuMpData->CpuData[Index1].ApicId == ApicId) {
- PeiCpuMpData->BspNumber = (UINT32) Index1;
- break;
- }
- }
- }
-}
-/**
- This function will be called from AP reset code if BSP uses WakeUpAP.
-
- @param ExchangeInfo Pointer to the MP exchange info buffer
- @param NumApsExecuting Number of curret executing AP
-**/
-VOID
-EFIAPI
-ApCFunction (
- IN MP_CPU_EXCHANGE_INFO *ExchangeInfo,
- IN UINTN NumApsExecuting
- )
-{
- PEI_CPU_MP_DATA *PeiCpuMpData;
- UINTN BistData;
-
- PeiCpuMpData = ExchangeInfo->PeiCpuMpData;
- if (PeiCpuMpData->InitFlag) {
- //
- // This is first time AP wakeup, get BIST inforamtion from AP stack
- //
- BistData = *(UINTN *) (PeiCpuMpData->Buffer + NumApsExecuting * PeiCpuMpData->CpuApStackSize - sizeof (UINTN));
- PeiCpuMpData->CpuData[NumApsExecuting].ApicId = GetInitialApicId ();
- PeiCpuMpData->CpuData[NumApsExecuting].Health.Uint32 = (UINT32) BistData;
- }
-
- //
- // AP finished executing C code
- //
- InterlockedIncrement ((UINT32 *)&PeiCpuMpData->FinishedCount);
-
-}
-
-/**
- This function will be called by BSP to wakeup AP.
-
- @param PeiCpuMpData Pointer to PEI CPU MP Data
- @param Broadcast TRUE: Send broadcast IPI to all APs
- FALSE: Send IPI to AP by ApicId
- @param ApicId Apic ID for the processor to be waked
- @param Procedure The function to be invoked by AP
- @param ProcedureArgument The argument to be passed into AP function
-**/
-VOID
-WakeUpAP (
- IN PEI_CPU_MP_DATA *PeiCpuMpData,
- IN BOOLEAN Broadcast,
- IN UINT32 ApicId,
- IN EFI_AP_PROCEDURE Procedure, OPTIONAL
- IN VOID *ProcedureArgument OPTIONAL
- )
-{
- volatile MP_CPU_EXCHANGE_INFO *ExchangeInfo;
-
- PeiCpuMpData->ApFunction = (UINTN) Procedure;
- PeiCpuMpData->ApFunctionArgument = (UINTN) ProcedureArgument;
- PeiCpuMpData->FinishedCount = 0;
-
- ExchangeInfo = PeiCpuMpData->MpCpuExchangeInfo;
- ExchangeInfo->Lock = 0;
- ExchangeInfo->StackStart = PeiCpuMpData->Buffer;
- ExchangeInfo->StackSize = PeiCpuMpData->CpuApStackSize;
- ExchangeInfo->BufferStart = PeiCpuMpData->WakeupBuffer;
- ExchangeInfo->PmodeOffset = PeiCpuMpData->AddressMap.PModeEntryOffset;
- ExchangeInfo->LmodeOffset = PeiCpuMpData->AddressMap.LModeEntryOffset;
- ExchangeInfo->Cr3 = AsmReadCr3 ();
- ExchangeInfo->CFunction = (UINTN) ApCFunction;
- ExchangeInfo->NumApsExecuting = 0;
- ExchangeInfo->PeiCpuMpData = PeiCpuMpData;
-
- //
- // Get the BSP's data of GDT and IDT
- //
- CopyMem ((VOID *)&ExchangeInfo->GdtrProfile, &mGdt, sizeof(mGdt));
- AsmReadIdtr ((IA32_DESCRIPTOR *) &ExchangeInfo->IdtrProfile);
-
- if (Broadcast) {
- SendInitSipiSipiAllExcludingSelf ((UINT32) ExchangeInfo->BufferStart);
- } else {
- SendInitSipiSipi (ApicId, (UINT32) ExchangeInfo->BufferStart);
- }
-
- return ;
-}
-
-/**
- Get available system memory below 1MB by specified size.
-
- @param WakeupBufferSize Wakeup buffer size required
-
- @retval other Return wakeup buffer address below 1MB.
- @retval -1 Cannot find free memory below 1MB.
-**/
-UINTN
-GetWakeupBuffer (
- IN UINTN WakeupBufferSize
- )
-{
- EFI_PEI_HOB_POINTERS Hob;
- UINTN WakeupBufferStart;
- UINTN WakeupBufferEnd;
-
- //
- // Get the HOB list for processing
- //
- Hob.Raw = GetHobList ();
-
- //
- // Collect memory ranges
- //
- while (!END_OF_HOB_LIST (Hob)) {
- if (Hob.Header->HobType == EFI_HOB_TYPE_RESOURCE_DESCRIPTOR) {
- if ((Hob.ResourceDescriptor->PhysicalStart < BASE_1MB) &&
- (Hob.ResourceDescriptor->ResourceType == EFI_RESOURCE_SYSTEM_MEMORY) &&
- ((Hob.ResourceDescriptor->ResourceAttribute &
- (EFI_RESOURCE_ATTRIBUTE_READ_PROTECTED |
- EFI_RESOURCE_ATTRIBUTE_WRITE_PROTECTED |
- EFI_RESOURCE_ATTRIBUTE_EXECUTION_PROTECTED
- )) == 0)
- ) {
- //
- // Need memory under 1MB to be collected here
- //
- WakeupBufferEnd = (UINTN) (Hob.ResourceDescriptor->PhysicalStart + Hob.ResourceDescriptor->ResourceLength);
- if (WakeupBufferEnd > BASE_1MB) {
- //
- // Wakeup buffer should be under 1MB
- //
- WakeupBufferEnd = BASE_1MB;
- }
- //
- // Wakeup buffer should be aligned on 4KB
- //
- WakeupBufferStart = (WakeupBufferEnd - WakeupBufferSize) & ~(SIZE_4KB - 1);
- if (WakeupBufferStart < Hob.ResourceDescriptor->PhysicalStart) {
- continue;
- }
- //
- // Create a memory allocation HOB.
- //
- BuildMemoryAllocationHob (
- WakeupBufferStart,
- WakeupBufferSize,
- EfiBootServicesData
- );
- return WakeupBufferStart;
- }
- }
- //
- // Find the next HOB
- //
- Hob.Raw = GET_NEXT_HOB (Hob);
- }
-
- return (UINTN) -1;
-}
-
-/**
- Get available system memory below 1MB by specified size.
-
- @param PeiCpuMpData Pointer to PEI CPU MP Data
-**/
-VOID
-BackupAndPrepareWakeupBuffer(
- IN PEI_CPU_MP_DATA *PeiCpuMpData
- )
-{
- CopyMem (
- (VOID *) PeiCpuMpData->BackupBuffer,
- (VOID *) PeiCpuMpData->WakeupBuffer,
- PeiCpuMpData->BackupBufferSize
- );
- CopyMem (
- (VOID *) PeiCpuMpData->WakeupBuffer,
- (VOID *) PeiCpuMpData->AddressMap.RendezvousFunnelAddress,
- PeiCpuMpData->AddressMap.RendezvousFunnelSize
- );
-}
-/**
- This function will get CPU count in the system.
-
- @param PeiCpuMpData Pointer to PEI CPU MP Data
-
- @return AP processor count
-**/
-UINT32
-CountProcessorNumber (
- IN PEI_CPU_MP_DATA *PeiCpuMpData
- )
-{
-
- //
- // Send broadcast IPI to APs to wakeup APs
- //
- PeiCpuMpData->InitFlag = 1;
- WakeUpAP (PeiCpuMpData, TRUE, 0, NULL, NULL);
- //
- // Wait for AP task to complete and then exit.
- //
- MicroSecondDelay (PcdGet32 (PcdCpuApInitTimeOutInMicroSeconds));
- PeiCpuMpData->InitFlag = 0;
- PeiCpuMpData->CpuCount += (UINT32) PeiCpuMpData->MpCpuExchangeInfo->NumApsExecuting;
- //
- // Sort BSP/Aps by CPU APIC ID in ascending order
- //
- SortApicId (PeiCpuMpData);
-
- DEBUG ((EFI_D_INFO, "CpuMpPei: Find %d processors in system.\n", PeiCpuMpData->CpuCount));
- return PeiCpuMpData->CpuCount;
-}
-
-/**
- Prepare for AP wakeup buffer and copy AP reset code into it.
-
- Get wakeup buffer below 1MB. Allocate memory for CPU MP Data and APs Stack.
-
- @return Pointer to PEI CPU MP Data
-**/
-PEI_CPU_MP_DATA *
-PrepareAPStartupVector (
- VOID
- )
-{
- EFI_STATUS Status;
- UINT32 MaxCpuCount;
- PEI_CPU_MP_DATA *PeiCpuMpData;
- EFI_PHYSICAL_ADDRESS Buffer;
- UINTN BufferSize;
- UINTN WakeupBuffer;
- UINTN WakeupBufferSize;
- MP_ASSEMBLY_ADDRESS_MAP AddressMap;
-
- AsmGetAddressMap (&AddressMap);
- WakeupBufferSize = AddressMap.RendezvousFunnelSize + sizeof (MP_CPU_EXCHANGE_INFO);
- WakeupBuffer = GetWakeupBuffer ((WakeupBufferSize + SIZE_4KB - 1) & ~(SIZE_4KB - 1));
- DEBUG ((EFI_D_INFO, "CpuMpPei: WakeupBuffer = 0x%x\n", WakeupBuffer));
-
- //
- // Allocate Pages for APs stack, CPU MP Data and backup buffer for wakeup buffer
- //
- MaxCpuCount = PcdGet32(PcdCpuMaxLogicalProcessorNumber);
- BufferSize = PcdGet32 (PcdCpuApStackSize) * MaxCpuCount + sizeof (PEI_CPU_MP_DATA)
- + WakeupBufferSize + sizeof (PEI_CPU_DATA) * MaxCpuCount;
- Status = PeiServicesAllocatePages (
- EfiBootServicesData,
- EFI_SIZE_TO_PAGES (BufferSize),
- &Buffer
- );
- ASSERT_EFI_ERROR (Status);
-
- PeiCpuMpData = (PEI_CPU_MP_DATA *) (UINTN) (Buffer + PcdGet32 (PcdCpuApStackSize) * MaxCpuCount);
- PeiCpuMpData->Buffer = (UINTN) Buffer;
- PeiCpuMpData->CpuApStackSize = PcdGet32 (PcdCpuApStackSize);
- PeiCpuMpData->WakeupBuffer = WakeupBuffer;
- PeiCpuMpData->BackupBuffer = (UINTN)PeiCpuMpData + sizeof (PEI_CPU_MP_DATA);
- PeiCpuMpData->BackupBufferSize = WakeupBufferSize;
- PeiCpuMpData->MpCpuExchangeInfo = (MP_CPU_EXCHANGE_INFO *) (UINTN) (WakeupBuffer + AddressMap.RendezvousFunnelSize);
-
- PeiCpuMpData->CpuCount = 1;
- PeiCpuMpData->BspNumber = 0;
- PeiCpuMpData->CpuData = (PEI_CPU_DATA *) (PeiCpuMpData->MpCpuExchangeInfo + 1);
- PeiCpuMpData->CpuData[0].ApicId = GetInitialApicId ();
- PeiCpuMpData->CpuData[0].Health.Uint32 = 0;
- CopyMem (&PeiCpuMpData->AddressMap, &AddressMap, sizeof (MP_ASSEMBLY_ADDRESS_MAP));
-
- //
- // Backup original data and copy AP reset code in it
- //
- BackupAndPrepareWakeupBuffer(PeiCpuMpData);
-
- return PeiCpuMpData;
-}
-/**
- The Entry point of the MP CPU PEIM.
-
- This function will wakeup APs and collect CPU AP count and install the
- Mp Service Ppi.
-
- @param FileHandle Handle of the file being invoked.
- @param PeiServices Describes the list of possible PEI Services.
-
- @retval EFI_SUCCESS MpServicePpi is installed successfully.
-
-**/
-EFI_STATUS
-EFIAPI
-CpuMpPeimInit (
- IN EFI_PEI_FILE_HANDLE FileHandle,
- IN CONST EFI_PEI_SERVICES **PeiServices
- )
-{
-
- PEI_CPU_MP_DATA *PeiCpuMpData;
- UINT32 ProcessorCount;
-
- //
- // Load new GDT table on BSP
- //
- AsmInitializeGdt (&mGdt);
- //
- // Get wakeup buffer and copy AP reset code in it
- //
- PeiCpuMpData = PrepareAPStartupVector ();
- //
- // Count processor number and collect processor information
- //
- ProcessorCount = CountProcessorNumber (PeiCpuMpData);
-
- return EFI_SUCCESS;
-}
+/** @file\r
+ CPU PEI Module installs CPU Multiple Processor PPI.\r
+\r
+ Copyright (c) 2015 - 2016, Intel Corporation. All rights reserved.<BR>\r
+ This program and the accompanying materials\r
+ are licensed and made available under the terms and conditions of the BSD License\r
+ which accompanies this distribution. The full text of the license may be found at\r
+ http://opensource.org/licenses/bsd-license.php\r
+\r
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.\r
+\r
+**/\r
+\r
+#include "CpuMpPei.h"\r
+\r
+//\r
+// CPU MP PPI to be installed\r
+//\r
+EFI_PEI_MP_SERVICES_PPI mMpServicesPpi = {\r
+ PeiGetNumberOfProcessors,\r
+ PeiGetProcessorInfo,\r
+ PeiStartupAllAPs,\r
+ PeiStartupThisAP,\r
+ PeiSwitchBSP,\r
+ PeiEnableDisableAP,\r
+ PeiWhoAmI,\r
+};\r
+\r
+EFI_PEI_PPI_DESCRIPTOR mPeiCpuMpPpiDesc = {\r
+ (EFI_PEI_PPI_DESCRIPTOR_PPI | EFI_PEI_PPI_DESCRIPTOR_TERMINATE_LIST),\r
+ &gEfiPeiMpServicesPpiGuid,\r
+ &mMpServicesPpi\r
+};\r
+\r
+/**\r
+ This service retrieves the number of logical processor in the platform\r
+ and the number of those logical processors that are enabled on this boot.\r
+ This service may only be called from the BSP.\r
+\r
+ This function is used to retrieve the following information:\r
+ - The number of logical processors that are present in the system.\r
+ - The number of enabled logical processors in the system at the instant\r
+ this call is made.\r
+\r
+ Because MP Service Ppi provides services to enable and disable processors\r
+ dynamically, the number of enabled logical processors may vary during the\r
+ course of a boot session.\r
+\r
+ If this service is called from an AP, then EFI_DEVICE_ERROR is returned.\r
+ If NumberOfProcessors or NumberOfEnabledProcessors is NULL, then\r
+ EFI_INVALID_PARAMETER is returned. Otherwise, the total number of processors\r
+ is returned in NumberOfProcessors, the number of currently enabled processor\r
+ is returned in NumberOfEnabledProcessors, and EFI_SUCCESS is returned.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This Pointer to this instance of the PPI.\r
+ @param[out] NumberOfProcessors Pointer to the total number of logical processors in\r
+ the system, including the BSP and disabled APs.\r
+ @param[out] NumberOfEnabledProcessors\r
+ Number of processors in the system that are enabled.\r
+\r
+ @retval EFI_SUCCESS The number of logical processors and enabled\r
+ logical processors was retrieved.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER NumberOfProcessors is NULL.\r
+ NumberOfEnabledProcessors is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiGetNumberOfProcessors (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ OUT UINTN *NumberOfProcessors,\r
+ OUT UINTN *NumberOfEnabledProcessors\r
+ )\r
+{\r
+ if ((NumberOfProcessors == NULL) || (NumberOfEnabledProcessors == NULL)) {\r
+ return EFI_INVALID_PARAMETER;\r
+ }\r
+\r
+ return MpInitLibGetNumberOfProcessors (\r
+ NumberOfProcessors,\r
+ NumberOfEnabledProcessors\r
+ );\r
+}\r
+\r
+/**\r
+ Gets detailed MP-related information on the requested processor at the\r
+ instant this call is made. This service may only be called from the BSP.\r
+\r
+ This service retrieves detailed MP-related information about any processor\r
+ on the platform. Note the following:\r
+ - The processor information may change during the course of a boot session.\r
+ - The information presented here is entirely MP related.\r
+\r
+ Information regarding the number of caches and their sizes, frequency of operation,\r
+ slot numbers is all considered platform-related information and is not provided\r
+ by this service.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This Pointer to this instance of the PPI.\r
+ @param[in] ProcessorNumber Pointer to the total number of logical processors in\r
+ the system, including the BSP and disabled APs.\r
+ @param[out] ProcessorInfoBuffer Number of processors in the system that are enabled.\r
+\r
+ @retval EFI_SUCCESS Processor information was returned.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_INVALID_PARAMETER ProcessorInfoBuffer is NULL.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist in the platform.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiGetProcessorInfo (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ OUT EFI_PROCESSOR_INFORMATION *ProcessorInfoBuffer\r
+ )\r
+{\r
+ return MpInitLibGetProcessorInfo (ProcessorNumber, ProcessorInfoBuffer, NULL);\r
+}\r
+\r
+/**\r
+ This service executes a caller provided function on all enabled APs. APs can\r
+ run either simultaneously or one at a time in sequence. This service supports\r
+ both blocking requests only. This service may only\r
+ be called from the BSP.\r
+\r
+ This function is used to dispatch all the enabled APs to the function specified\r
+ by Procedure. If any enabled AP is busy, then EFI_NOT_READY is returned\r
+ immediately and Procedure is not started on any AP.\r
+\r
+ If SingleThread is TRUE, all the enabled APs execute the function specified by\r
+ Procedure one by one, in ascending order of processor handle number. Otherwise,\r
+ all the enabled APs execute the function specified by Procedure simultaneously.\r
+\r
+ If the timeout specified by TimeoutInMicroSeconds expires before all APs return\r
+ from Procedure, then Procedure on the failed APs is terminated. All enabled APs\r
+ are always available for further calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
+ and EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If FailedCpuList is not NULL, its\r
+ content points to the list of processor handle numbers in which Procedure was\r
+ terminated.\r
+\r
+ Note: It is the responsibility of the consumer of the EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
+ to make sure that the nature of the code that is executed on the BSP and the\r
+ dispatched APs is well controlled. The MP Services Ppi does not guarantee\r
+ that the Procedure function is MP-safe. Hence, the tasks that can be run in\r
+ parallel are limited to certain independent tasks and well-controlled exclusive\r
+ code. PEI services and Ppis may not be called by APs unless otherwise\r
+ specified.\r
+\r
+ In blocking execution mode, BSP waits until all APs finish or\r
+ TimeoutInMicroSeconds expires.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
+ @param[in] Procedure A pointer to the function to be run on enabled APs of\r
+ the system.\r
+ @param[in] SingleThread If TRUE, then all the enabled APs execute the function\r
+ specified by Procedure one by one, in ascending order\r
+ of processor handle number. If FALSE, then all the\r
+ enabled APs execute the function specified by Procedure\r
+ simultaneously.\r
+ @param[in] TimeoutInMicroSeconds\r
+ Indicates the time limit in microseconds for APs to\r
+ return from Procedure, for blocking mode only. Zero\r
+ means infinity. If the timeout expires before all APs\r
+ return from Procedure, then Procedure on the failed APs\r
+ is terminated. All enabled APs are available for next\r
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the\r
+ timeout expires in blocking mode, BSP returns\r
+ EFI_TIMEOUT.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, all APs have finished before the\r
+ timeout expired.\r
+ @retval EFI_DEVICE_ERROR Caller processor is AP.\r
+ @retval EFI_NOT_STARTED No enabled APs exist in the system.\r
+ @retval EFI_NOT_READY Any enabled APs are busy.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before all\r
+ enabled APs have finished.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiStartupAllAPs (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN BOOLEAN SingleThread,\r
+ IN UINTN TimeoutInMicroSeconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibStartupAllAPs (\r
+ Procedure,\r
+ SingleThread,\r
+ NULL,\r
+ TimeoutInMicroSeconds,\r
+ ProcedureArgument,\r
+ NULL\r
+ );\r
+}\r
+\r
+/**\r
+ This service lets the caller get one enabled AP to execute a caller-provided\r
+ function. The caller can request the BSP to wait for the completion\r
+ of the AP. This service may only be called from the BSP.\r
+\r
+ This function is used to dispatch one enabled AP to the function specified by\r
+ Procedure passing in the argument specified by ProcedureArgument.\r
+ The execution is in blocking mode. The BSP waits until the AP finishes or\r
+ TimeoutInMicroSecondss expires.\r
+\r
+ If the timeout specified by TimeoutInMicroseconds expires before the AP returns\r
+ from Procedure, then execution of Procedure by the AP is terminated. The AP is\r
+ available for subsequent calls to EFI_PEI_MP_SERVICES_PPI.StartupAllAPs() and\r
+ EFI_PEI_MP_SERVICES_PPI.StartupThisAP().\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
+ @param[in] Procedure A pointer to the function to be run on enabled APs of\r
+ the system.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
+ @param[in] TimeoutInMicroseconds\r
+ Indicates the time limit in microseconds for APs to\r
+ return from Procedure, for blocking mode only. Zero\r
+ means infinity. If the timeout expires before all APs\r
+ return from Procedure, then Procedure on the failed APs\r
+ is terminated. All enabled APs are available for next\r
+ function assigned by EFI_PEI_MP_SERVICES_PPI.StartupAllAPs()\r
+ or EFI_PEI_MP_SERVICES_PPI.StartupThisAP(). If the\r
+ timeout expires in blocking mode, BSP returns\r
+ EFI_TIMEOUT.\r
+ @param[in] ProcedureArgument The parameter passed into Procedure for all APs.\r
+\r
+ @retval EFI_SUCCESS In blocking mode, specified AP finished before the\r
+ timeout expires.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_TIMEOUT In blocking mode, the timeout expired before the\r
+ specified AP has finished.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP or disabled AP.\r
+ @retval EFI_INVALID_PARAMETER Procedure is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiStartupThisAP (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ IN EFI_AP_PROCEDURE Procedure,\r
+ IN UINTN ProcessorNumber,\r
+ IN UINTN TimeoutInMicroseconds,\r
+ IN VOID *ProcedureArgument OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibStartupThisAP (\r
+ Procedure,\r
+ ProcessorNumber,\r
+ NULL,\r
+ TimeoutInMicroseconds,\r
+ ProcedureArgument,\r
+ NULL\r
+ );\r
+}\r
+\r
+/**\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. This call can only be performed\r
+ by the current BSP.\r
+\r
+ This service switches the requested AP to be the BSP from that point onward.\r
+ This service changes the BSP for all purposes. The new BSP can take over the\r
+ execution of the old BSP and continue seamlessly from where the old one left\r
+ off.\r
+\r
+ If the BSP cannot be switched prior to the return from this service, then\r
+ EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
+ @param[in] EnableOldBSP If TRUE, then the old BSP will be listed as an enabled\r
+ AP. Otherwise, it will be disabled.\r
+\r
+ @retval EFI_SUCCESS BSP successfully switched.\r
+ @retval EFI_UNSUPPORTED Switching the BSP cannot be completed prior to this\r
+ service returning.\r
+ @retval EFI_UNSUPPORTED Switching the BSP is not supported.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND The processor with the handle specified by\r
+ ProcessorNumber does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the current BSP or a disabled\r
+ AP.\r
+ @retval EFI_NOT_READY The specified AP is busy.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiSwitchBSP (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableOldBSP\r
+ )\r
+{\r
+ return MpInitLibSwitchBSP (ProcessorNumber, EnableOldBSP);\r
+}\r
+\r
+/**\r
+ This service lets the caller enable or disable an AP from this point onward.\r
+ This service may only be called from the BSP.\r
+\r
+ This service allows the caller enable or disable an AP from this point onward.\r
+ The caller can optionally specify the health status of the AP by Health. If\r
+ an AP is being disabled, then the state of the disabled AP is implementation\r
+ dependent. If an AP is enabled, then the implementation must guarantee that a\r
+ complete initialization sequence is performed on the AP, so the AP is in a state\r
+ that is compatible with an MP operating system.\r
+\r
+ If the enable or disable AP operation cannot be completed prior to the return\r
+ from this service, then EFI_UNSUPPORTED must be returned.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
+ @param[in] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
+ @param[in] EnableAP Specifies the new state for the processor for enabled,\r
+ FALSE for disabled.\r
+ @param[in] HealthFlag If not NULL, a pointer to a value that specifies the\r
+ new health status of the AP. This flag corresponds to\r
+ StatusFlag defined in EFI_PEI_MP_SERVICES_PPI.GetProcessorInfo().\r
+ Only the PROCESSOR_HEALTH_STATUS_BIT is used. All other\r
+ bits are ignored. If it is NULL, this parameter is\r
+ ignored.\r
+\r
+ @retval EFI_SUCCESS The specified AP was enabled or disabled successfully.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP cannot be completed prior\r
+ to this service returning.\r
+ @retval EFI_UNSUPPORTED Enabling or disabling an AP is not supported.\r
+ @retval EFI_DEVICE_ERROR The calling processor is an AP.\r
+ @retval EFI_NOT_FOUND Processor with the handle specified by ProcessorNumber\r
+ does not exist.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber specifies the BSP.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiEnableDisableAP (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ IN UINTN ProcessorNumber,\r
+ IN BOOLEAN EnableAP,\r
+ IN UINT32 *HealthFlag OPTIONAL\r
+ )\r
+{\r
+ return MpInitLibEnableDisableAP (ProcessorNumber, EnableAP, HealthFlag);\r
+}\r
+\r
+/**\r
+ This return the handle number for the calling processor. This service may be\r
+ called from the BSP and APs.\r
+\r
+ This service returns the processor handle number for the calling processor.\r
+ The returned value is in the range from 0 to the total number of logical\r
+ processors minus 1. The total number of logical processors can be retrieved\r
+ with EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors(). This service may be\r
+ called from the BSP and APs. If ProcessorNumber is NULL, then EFI_INVALID_PARAMETER\r
+ is returned. Otherwise, the current processors handle number is returned in\r
+ ProcessorNumber, and EFI_SUCCESS is returned.\r
+\r
+ @param[in] PeiServices An indirect pointer to the PEI Services Table\r
+ published by the PEI Foundation.\r
+ @param[in] This A pointer to the EFI_PEI_MP_SERVICES_PPI instance.\r
+ @param[out] ProcessorNumber The handle number of the AP. The range is from 0 to the\r
+ total number of logical processors minus 1. The total\r
+ number of logical processors can be retrieved by\r
+ EFI_PEI_MP_SERVICES_PPI.GetNumberOfProcessors().\r
+\r
+ @retval EFI_SUCCESS The current processor handle number was returned in\r
+ ProcessorNumber.\r
+ @retval EFI_INVALID_PARAMETER ProcessorNumber is NULL.\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+PeiWhoAmI (\r
+ IN CONST EFI_PEI_SERVICES **PeiServices,\r
+ IN EFI_PEI_MP_SERVICES_PPI *This,\r
+ OUT UINTN *ProcessorNumber\r
+ )\r
+{\r
+ return MpInitLibWhoAmI (ProcessorNumber);\r
+}\r
+\r
+/**\r
+ The Entry point of the MP CPU PEIM.\r
+\r
+ This function will wakeup APs and collect CPU AP count and install the\r
+ Mp Service Ppi.\r
+\r
+ @param FileHandle Handle of the file being invoked.\r
+ @param PeiServices Describes the list of possible PEI Services.\r
+\r
+ @retval EFI_SUCCESS MpServicePpi is installed successfully.\r
+\r
+**/\r
+EFI_STATUS\r
+EFIAPI\r
+CpuMpPeimInit (\r
+ IN EFI_PEI_FILE_HANDLE FileHandle,\r
+ IN CONST EFI_PEI_SERVICES **PeiServices\r
+ )\r
+{\r
+ EFI_STATUS Status;\r
+ EFI_VECTOR_HANDOFF_INFO *VectorInfo;\r
+ EFI_PEI_VECTOR_HANDOFF_INFO_PPI *VectorHandoffInfoPpi;\r
+\r
+ //\r
+ // Get Vector Hand-off Info PPI\r
+ //\r
+ VectorInfo = NULL;\r
+ Status = PeiServicesLocatePpi (\r
+ &gEfiVectorHandoffInfoPpiGuid,\r
+ 0,\r
+ NULL,\r
+ (VOID **)&VectorHandoffInfoPpi\r
+ );\r
+ if (Status == EFI_SUCCESS) {\r
+ VectorInfo = VectorHandoffInfoPpi->Info;\r
+ }\r
+ Status = InitializeCpuExceptionHandlers (VectorInfo);\r
+ ASSERT_EFI_ERROR (Status);\r
+ \r
+ //\r
+ // Wakeup APs to do initialization\r
+ //\r
+ Status = MpInitLibInitialize ();\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ //\r
+ // Update and publish CPU BIST information\r
+ //\r
+ CollectBistDataFromPpi (PeiServices);\r
+\r
+ //\r
+ // Install CPU MP PPI\r
+ //\r
+ Status = PeiServicesInstallPpi(&mPeiCpuMpPpiDesc);\r
+ ASSERT_EFI_ERROR (Status);\r
+\r
+ return Status;\r
+}\r
projects / mirror_edk2.git / blobdiff