+++ /dev/null
-/** @file\r
- Block IO protocol as defined in the UEFI 2.0 specification.\r
-\r
- The Block IO protocol is used to abstract block devices like hard drives,\r
- DVD-ROMs and floppy drives.\r
-\r
- Copyright (c) 2006 - 2011, Intel Corporation. All rights reserved.<BR>\r
- SPDX-License-Identifier: BSD-2-Clause-Patent\r
-\r
-**/\r
-\r
-#ifndef __PEI_BLOCK_IO_H__\r
-#define __PEI_BLOCK_IO_H__\r
-// {BC5FA650-EDBB-4d0d-B3A3-D98907F847DF}\r
-#ifndef ECP_FLAG\r
-#define PEI_BLOCK_IO_PPI_GUID \\r
- { \\r
- 0xbc5fa650, 0xedbb, 0x4d0d, { 0xb3, 0xa3, 0xd9, 0x89, 0x7, 0xf8, 0x47, 0xdf } \\r
- }\r
-#endif\r
-typedef struct _PEI_BLOCK_IO_PPI PEI_BLOCK_IO_PPI;\r
-\r
-\r
-/**\r
- Reset the Block Device.\r
-\r
- @param This Indicates a pointer to the calling context.\r
- @param ExtendedVerification Driver may perform diagnostics on reset.\r
-\r
- @retval EFI_SUCCESS The device was reset.\r
- @retval EFI_DEVICE_ERROR The device is not functioning properly and could\r
- not be reset.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *PEI_BLOCK_RESET)(\r
- IN PEI_BLOCK_IO_PPI *This,\r
- IN BOOLEAN ExtendedVerification\r
- );\r
-\r
-/**\r
- Read BufferSize bytes from Lba into Buffer.\r
-\r
- @param This Indicates a pointer to the calling context.\r
- @param MediaId Id of the media, changes every time the media is replaced.\r
- @param Lba The starting Logical Block Address to read from\r
- @param BufferSize Size of Buffer, must be a multiple of device block size.\r
- @param Buffer A pointer to the destination buffer for the data. The caller is\r
- responsible for either having implicit or explicit ownership of the buffer.\r
-\r
- @retval EFI_SUCCESS The data was read correctly from the device.\r
- @retval EFI_DEVICE_ERROR The device reported an error while performing the read.\r
- @retval EFI_NO_MEDIA There is no media in the device.\r
- @retval EFI_MEDIA_CHANGED The MediaId does not matched the current device.\r
- @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.\r
- @retval EFI_INVALID_PARAMETER The read request contains LBAs that are not valid,\r
- or the buffer is not on proper alignment.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *PEI_BLOCK_READ)(\r
- IN EFI_PEI_SERVICES **PeiServices,\r
- IN PEI_BLOCK_IO_PPI *This,\r
- IN UINT32 MediaId,\r
- IN EFI_LBA Lba,\r
- IN UINTN BufferSize,\r
- OUT VOID *Buffer\r
- );\r
-\r
-/**\r
- Write BufferSize bytes from Lba into Buffer.\r
-\r
- @param This Indicates a pointer to the calling context.\r
- @param MediaId The media ID that the write request is for.\r
- @param Lba The starting logical block address to be written. The caller is\r
- responsible for writing to only legitimate locations.\r
- @param BufferSize Size of Buffer, must be a multiple of device block size.\r
- @param Buffer A pointer to the source buffer for the data.\r
-\r
- @retval EFI_SUCCESS The data was written correctly to the device.\r
- @retval EFI_WRITE_PROTECTED The device can not be written to.\r
- @retval EFI_DEVICE_ERROR The device reported an error while performing the write.\r
- @retval EFI_NO_MEDIA There is no media in the device.\r
- @retval EFI_MEDIA_CHNAGED The MediaId does not matched the current device.\r
- @retval EFI_BAD_BUFFER_SIZE The Buffer was not a multiple of the block size of the device.\r
- @retval EFI_INVALID_PARAMETER The write request contains LBAs that are not valid,\r
- or the buffer is not on proper alignment.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *PEI_BLOCK_WRITE)(\r
- IN EFI_PEI_SERVICES **PeiServices,\r
- IN PEI_BLOCK_IO_PPI *This,\r
- IN UINT32 MediaId,\r
- IN EFI_LBA Lba,\r
- IN UINTN BufferSize,\r
- IN VOID *Buffer\r
- );\r
-\r
-/**\r
- Flush the Block Device.\r
-\r
- @param This Indicates a pointer to the calling context.\r
-\r
- @retval EFI_SUCCESS All outstanding data was written to the device\r
- @retval EFI_DEVICE_ERROR The device reported an error while writting back the data\r
- @retval EFI_NO_MEDIA There is no media in the device.\r
-\r
-**/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *PEI_BLOCK_FLUSH)(\r
- IN PEI_BLOCK_IO_PPI *This\r
- );\r
-\r
-/**\r
- Block IO read only mode data and updated only via members of BlockIO\r
-**/\r
-typedef struct {\r
- ///\r
- /// The curent media Id. If the media changes, this value is changed.\r
- ///\r
- UINT32 MediaId;\r
-\r
- ///\r
- /// TRUE if the media is removable; otherwise, FALSE.\r
- ///\r
- BOOLEAN RemovableMedia;\r
-\r
- ///\r
- /// TRUE if there is a media currently present in the device;\r
- /// othersise, FALSE. THis field shows the media present status\r
- /// as of the most recent ReadBlocks() or WriteBlocks() call.\r
- ///\r
- BOOLEAN MediaPresent;\r
-\r
- ///\r
- /// TRUE if LBA 0 is the first block of a partition; otherwise\r
- /// FALSE. For media with only one partition this would be TRUE.\r
- ///\r
- BOOLEAN LogicalPartition;\r
-\r
- ///\r
- /// TRUE if the media is marked read-only otherwise, FALSE.\r
- /// This field shows the read-only status as of the most recent WriteBlocks () call.\r
- ///\r
- BOOLEAN ReadOnly;\r
-\r
- ///\r
- /// TRUE if the WriteBlock () function caches write data.\r
- ///\r
- BOOLEAN WriteCaching;\r
-\r
- ///\r
- /// The intrinsic block size of the device. If the media changes, then\r
- /// this field is updated.\r
- ///\r
- UINT32 BlockSize;\r
-\r
- ///\r
- /// Supplies the alignment requirement for any buffer to read or write block(s).\r
- ///\r
- UINT32 IoAlign;\r
-\r
- ///\r
- /// The last logical block address on the device.\r
- /// If the media changes, then this field is updated.\r
- ///\r
- EFI_LBA LastBlock;\r
-\r
- ///\r
- /// Only present if EFI_BLOCK_IO_PROTOCOL.Revision is greater than or equal to\r
- /// EFI_BLOCK_IO_PROTOCOL_REVISION2. Returns the first LBA is aligned to\r
- /// a physical block boundary.\r
- ///\r
- EFI_LBA LowestAlignedLba;\r
-\r
- ///\r
- /// Only present if EFI_BLOCK_IO_PROTOCOL.Revision is greater than or equal to\r
- /// EFI_BLOCK_IO_PROTOCOL_REVISION2. Returns the number of logical blocks\r
- /// per physical block.\r
- ///\r
- UINT32 LogicalBlocksPerPhysicalBlock;\r
-\r
- ///\r
- /// Only present if EFI_BLOCK_IO_PROTOCOL.Revision is greater than or equal to\r
- /// EFI_BLOCK_IO_PROTOCOL_REVISION3. Returns the optimal transfer length\r
- /// granularity as a number of logical blocks.\r
- ///\r
- UINT32 OptimalTransferLengthGranularity;\r
-#ifdef ECP_FLAG\r
-} PEI_BLOCK_IO_MEDIA2;\r
-#else\r
-} PEI_BLOCK_IO_MEDIA;\r
-#endif\r
-#define EFI_BLOCK_IO_PROTOCOL_REVISION 0x00010000\r
-#define EFI_BLOCK_IO_PROTOCOL_REVISION2 0x00020001\r
-#define EFI_BLOCK_IO_PROTOCOL_REVISION3 0x00020031\r
-\r
-///\r
-/// Revision defined in EFI1.1.\r
-///\r
-#define EFI_BLOCK_IO_INTERFACE_REVISION EFI_BLOCK_IO_PROTOCOL_REVISION\r
-\r
-///\r
-/// This protocol provides control over block devices.\r
-///\r
-struct _PEI_BLOCK_IO_PPI {\r
- ///\r
- /// The revision to which the block IO interface adheres. All future\r
- /// revisions must be backwards compatible. If a future version is not\r
- /// back wards compatible, it is not the same GUID.\r
- ///\r
- UINT64 Revision;\r
- ///\r
- /// Pointer to the EFI_BLOCK_IO_MEDIA data for this device.\r
- ///\r
- PEI_BLOCK_IO_MEDIA *Media;\r
- PEI_BLOCK_RESET Reset;\r
- PEI_BLOCK_READ ReadBlocks;\r
- PEI_BLOCK_WRITE WriteBlocks;\r
- PEI_BLOCK_FLUSH FlushBlocks;\r
-};\r
-\r
-//extern EFI_GUID gEfiBlockIoProtocolGuid;\r
-extern EFI_GUID gPeiBlockIoPpiGuid;\r
-#endif\r