+++ /dev/null
-/*++\r
-\r
-Copyright (c) 1999 - 2014, Intel Corporation. All rights reserved\r
-\r
- SPDX-License-Identifier: BSD-2-Clause-Patent\r
-\r
-\r
---*/\r
-\r
-\r
-/*++\r
-Module Name:\r
-\r
- SdHostIo.h\r
-\r
-Abstract:\r
-\r
- Interface definition for EFI_SD_HOST_IO_PROTOCOL\r
-\r
---*/\r
-\r
-#ifndef _SD_HOST_IO_H\r
-#define _SD_HOST_IO_H\r
-\r
-\r
-// Global ID for the EFI_SD_HOST_IO_PROTOCOL\r
-// {B63F8EC7-A9C9-4472-A4C0-4D8BF365CC51}\r
-//\r
-#define EFI_SD_HOST_IO_PROTOCOL_GUID \\r
- { 0xb63f8ec7, 0xa9c9, 0x4472, { 0xa4, 0xc0, 0x4d, 0x8b, 0xf3, 0x65, 0xcc, 0x51 } }\r
-\r
-typedef struct _EFI_SD_HOST_IO_PROTOCOL EFI_SD_HOST_IO_PROTOCOL;\r
-\r
-//\r
-// TODO: Move to Pci22.h\r
-//\r
-#define PCI_SUBCLASS_SD_HOST_CONTROLLER 0x05\r
-#define PCI_IF_STANDARD_HOST_NO_DMA 0x00\r
-#define PCI_IF_STANDARD_HOST_SUPPORT_DMA 0x01\r
-\r
-//\r
-// TODO: Retire\r
-//\r
-#define EFI_SD_HOST_IO_PROTOCOL_REVISION_01 0x01\r
-\r
-//\r
-// TODO: Do these belong in an Industry Standard include file?\r
-//\r
-// MMIO Registers definition for MMC/SDIO controller\r
-//\r
-#define MMIO_DMAADR 0x00\r
-#define MMIO_BLKSZ 0x04\r
-#define MMIO_BLKCNT 0x06\r
-#define MMIO_CMDARG 0x08\r
-#define MMIO_XFRMODE 0x0C\r
-#define MMIO_SDCMD 0x0E\r
-#define MMIO_RESP 0x10\r
-#define MMIO_BUFDATA 0x20\r
-#define MMIO_PSTATE 0x24\r
-#define MMIO_HOSTCTL 0x28\r
-#define MMIO_PWRCTL 0x29\r
-#define MMIO_BLKGAPCTL 0x2A\r
-#define MMIO_WAKECTL 0x2B\r
-#define MMIO_CLKCTL 0x2C\r
-#define MMIO_TOCTL 0x2E\r
-#define MMIO_SWRST 0x2F\r
-#define MMIO_NINTSTS 0x30\r
-#define MMIO_ERINTSTS 0x32\r
-#define MMIO_NINTEN 0x34\r
-#define MMIO_ERINTEN 0x36\r
-#define MMIO_NINTSIGEN 0x38\r
-#define MMIO_ERINTSIGEN 0x3A\r
-#define MMIO_AC12ERRSTS 0x3C\r
-#define MMIO_HOST_CTL2 0x3E //hphang <- New in VLV2\r
-#define MMIO_CAP 0x40\r
-#define MMIO_CAP2 0x44 //hphang <- New in VLV2\r
-#define MMIO_MCCAP 0x48\r
-#define MMIO_FORCEEVENTCMD12ERRSTAT 0x50 //hphang <- New in VLV2\r
-#define MMIO_FORCEEVENTERRINTSTAT 0x52 //hphang <- New in VLV2\r
-#define MMIO_ADMAERRSTAT 0x54 //hphang <- New in VLV2\r
-#define MMIO_ADMASYSADDR 0x58 //hphang <- New in VLV2\r
-#define MMIO_PRESETVALUE0 0x60 //hphang <- New in VLV2\r
-#define MMIO_PRESETVALUE1 0x64 //hphang <- New in VLV2\r
-#define MMIO_PRESETVALUE2 0x68 //hphang <- New in VLV2\r
-#define MMIO_PRESETVALUE3 0x6C //hphang <- New in VLV2\r
-#define MMIO_BOOTTIMEOUTCTRL 0x70 //hphang <- New in VLV2\r
-#define MMIO_DEBUGSEL 0x74 //hphang <- New in VLV2\r
-#define MMIO_SHAREDBUS 0xE0 //hphang <- New in VLV2\r
-#define MMIO_SPIINTSUP 0xF0 //hphang <- New in VLV2\r
-#define MMIO_SLTINTSTS 0xFC\r
-#define MMIO_CTRLRVER 0xFE\r
-\r
-typedef enum {\r
- ResponseNo = 0,\r
- ResponseR1,\r
- ResponseR1b,\r
- ResponseR2,\r
- ResponseR3,\r
- ResponseR4,\r
- ResponseR5,\r
- ResponseR5b,\r
- ResponseR6,\r
- ResponseR7\r
-} RESPONSE_TYPE;\r
-\r
-typedef enum {\r
- NoData = 0,\r
- InData,\r
- OutData\r
-} TRANSFER_TYPE;\r
-\r
-typedef enum {\r
- Reset_Auto = 0,\r
- Reset_DAT,\r
- Reset_CMD,\r
- Reset_DAT_CMD,\r
- Reset_All,\r
- Reset_HW\r
-} RESET_TYPE;\r
-\r
-\r
-typedef enum {\r
- SDMA = 0,\r
- ADMA2,\r
- PIO\r
-} DMA_MOD;\r
-\r
-typedef struct {\r
- UINT32 HighSpeedSupport: 1; //High speed supported\r
- UINT32 V18Support: 1; //1.8V supported\r
- UINT32 V30Support: 1; //3.0V supported\r
- UINT32 V33Support: 1; //3.3V supported\r
- UINT32 SDR50Support: 1;\r
- UINT32 SDR104Support: 1;\r
- UINT32 DDR50Support: 1;\r
- UINT32 Reserved0: 1;\r
- UINT32 BusWidth4: 1; // 4 bit width\r
- UINT32 BusWidth8: 1; // 8 bit width\r
- UINT32 Reserved1: 6;\r
- UINT32 SDMASupport: 1;\r
- UINT32 ADMA2Support: 1;\r
- UINT32 DmaMode: 2;\r
- UINT32 ReTuneTimer: 4;\r
- UINT32 ReTuneMode: 2;\r
- UINT32 Reserved2: 6;\r
- UINT32 BoundarySize;\r
-} HOST_CAPABILITY;\r
-\r
-/*++\r
-\r
- Routine Description:\r
- The main function used to send the command to the card inserted into the SD host\r
- slot.\r
- It will assemble the arguments to set the command register and wait for the command\r
- and transfer completed until timeout. Then it will read the response register to fill\r
- the ResponseData\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- CommandIndex - The command index to set the command index field of command register\r
- Argument - Command argument to set the argument field of command register\r
- DataType - TRANSFER_TYPE, indicates no data, data in or data out\r
- Buffer - Contains the data read from / write to the device\r
- BufferSize - The size of the buffer\r
- ResponseType - RESPONSE_TYPE\r
- TimeOut - Time out value in 1 ms unit\r
- ResponseData - Depending on the ResponseType, such as CSD or card status\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_INVALID_PARAMETER\r
- EFI_OUT_OF_RESOURCES\r
- EFI_TIMEOUT\r
- EFI_DEVICE_ERROR\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT16 CommandIndex,\r
- IN UINT32 Argument,\r
- IN TRANSFER_TYPE DataType,\r
- IN UINT8 *Buffer, OPTIONAL\r
- IN UINT32 BufferSize,\r
- IN RESPONSE_TYPE ResponseType,\r
- IN UINT32 TimeOut,\r
- OUT UINT32 *ResponseData OPTIONAL\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set max clock frequency of the host, the actual frequency\r
- may not be the same as MaxFrequency. It depends on\r
- the max frequency the host can support, divider, and host\r
- speed mode.\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- MaxFrequency - Max frequency in HZ\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_TIMEOUT\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 MaxFrequency\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set bus width of the host\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- BusWidth - Bus width in 1, 4, 8 bits\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_INVALID_PARAMETER\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 BusWidth\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set voltage which could supported by the host.\r
- Support 0(Power off the host), 1.8V, 3.0V, 3.3V\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- Voltage - Units in 0.1 V\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_INVALID_PARAMETER\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 Voltage\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set Host High Speed\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- HighSpeed - True for High Speed Mode set, false for normal mode\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_INVALID_PARAMETER\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 HighSpeed\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set High Speed Mode\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- SetHostDdrMode - True for DDR Mode set, false for normal mode\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_INVALID_PARAMETER\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 DdrMode\r
- );\r
-\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Reset the host\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- ResetAll - TRUE to reset all\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_TIMEOUT\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN RESET_TYPE ResetType\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Reset the host\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- Enable - TRUE to enable, FALSE to disable\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_TIMEOUT\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN BOOLEAN Enable\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Find whether these is a card inserted into the slot. If so\r
- init the host. If not, return EFI_NOT_FOUND.\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_NOT_FOUND\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This\r
- );\r
-\r
-/*++\r
-\r
- Routine Description:\r
- Set the Block length\r
-\r
- Arguments:\r
- This - Pointer to EFI_SD_HOST_IO_PROTOCOL\r
- BlockLength - card supportes block length\r
-\r
- Returns:\r
- EFI_SUCCESS\r
- EFI_TIMEOUT\r
-\r
---*/\r
-typedef\r
-EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH) (\r
- IN EFI_SD_HOST_IO_PROTOCOL *This,\r
- IN UINT32 BlockLength\r
- );\r
-\r
-typedef EFI_STATUS\r
-(EFIAPI *EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE)(\r
- IN EFI_SD_HOST_IO_PROTOCOL *This\r
- );\r
-\r
-\r
-\r
-//\r
-// Interface structure for the EFI SD Host I/O Protocol\r
-//\r
-struct _EFI_SD_HOST_IO_PROTOCOL {\r
- UINT32 Revision;\r
- HOST_CAPABILITY HostCapability;\r
- EFI_SD_HOST_IO_PROTOCOL_SEND_COMMAND SendCommand;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_CLOCK_FREQUENCY SetClockFrequency;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_BUS_WIDTH SetBusWidth;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_HOST_VOLTAGE SetHostVoltage;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_HOST_DDR_MODE SetHostDdrMode;\r
- EFI_SD_HOST_IO_PROTOCOL_RESET_SD_HOST ResetSdHost;\r
- EFI_SD_HOST_IO_PROTOCOL_ENABLE_AUTO_STOP_CMD EnableAutoStopCmd;\r
- EFI_SD_HOST_IO_PROTOCOL_DETECT_CARD_AND_INIT_HOST DetectCardAndInitHost;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_BLOCK_LENGTH SetBlockLength;\r
- EFI_SD_HOST_IO_PROTOCOL_SETUP_DEVICE SetupDevice;\r
- EFI_SD_HOST_IO_PROTOCOL_SET_HOST_SPEED_MODE SetHostSpeedMode;\r
-};\r
-\r
-extern EFI_GUID gEfiSdHostIoProtocolGuid;\r
-\r
-#endif\r
-\r