X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=BaseTools%2FSource%2FPython%2Fbuild%2Fbuild.py;h=1e14fb4dcc7d259f48347fc9a6f61a36e7930ef5;hp=6d83ac9701ba0dd92df254625a2674466d837bec;hb=b926f2f2a4cd404df1d2c1dddbcd1178acc63b5e;hpb=f25da33d13357f5e6065e297f5f361e5743ce72f
diff --git a/BaseTools/Source/Python/build/build.py b/BaseTools/Source/Python/build/build.py
index 6d83ac9701..1e14fb4dcc 100644
--- a/BaseTools/Source/Python/build/build.py
+++ b/BaseTools/Source/Python/build/build.py
@@ -2,7 +2,7 @@
# build a platform or a module
#
# Copyright (c) 2014, Hewlett-Packard Development Company, L.P.
-# Copyright (c) 2007 - 2015, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2017, Intel Corporation. All rights reserved.
#
# This program and the accompanying materials
# are licensed and made available under the terms and conditions of the BSD License
@@ -25,6 +25,7 @@ import time
import platform
import traceback
import encodings.ascii
+import itertools
from struct import *
from threading import *
@@ -53,7 +54,7 @@ import Common.GlobalData as GlobalData
# Version and Copyright
VersionNumber = "0.60" + ' ' + gBUILD_VERSION
__version__ = "%prog Version " + VersionNumber
-__copyright__ = "Copyright (c) 2007 - 2014, Intel Corporation All rights reserved."
+__copyright__ = "Copyright (c) 2007 - 2017, Intel Corporation All rights reserved."
## standard targets of build command
gSupportedTarget = ['all', 'genc', 'genmake', 'modules', 'libraries', 'fds', 'clean', 'cleanall', 'cleanlib', 'run']
@@ -109,6 +110,12 @@ def CheckEnvVariable():
# set multiple workspace
PackagesPath = os.getenv("PACKAGES_PATH")
mws.setWs(WorkspaceDir, PackagesPath)
+ if mws.PACKAGES_PATH:
+ for Path in mws.PACKAGES_PATH:
+ if not os.path.exists(Path):
+ EdkLogger.error("build", FILE_NOT_FOUND, "One Path in PACKAGES_PATH doesn't exist", ExtraData="%s" % Path)
+ elif ' ' in Path:
+ EdkLogger.error("build", FORMAT_NOT_SUPPORTED, "No space is allowed in PACKAGES_PATH", ExtraData=Path)
#
# Check EFI_SOURCE (Edk build convention). EDK_SOURCE will always point to ECP
@@ -210,7 +217,7 @@ def NormFile(FilePath, Workspace):
# check if the file path exists or not
if not os.path.isfile(FileFullPath):
- EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)
+ EdkLogger.error("build", FILE_NOT_FOUND, ExtraData="\t%s (Please give file in absolute path or relative to WORKSPACE)" % FileFullPath)
# remove workspace directory from the beginning part of the file path
if Workspace[-1] in ["\\", "/"]:
@@ -258,15 +265,16 @@ def LaunchCommand(Command, WorkingDir):
# It could be a string or sequence. We find that if command is a string in following Popen(),
# ubuntu may fail with an error message that the command is not found.
# So here we may need convert command from string to list instance.
- if not isinstance(Command, list):
- if platform.system() != 'Windows':
+ if platform.system() != 'Windows':
+ if not isinstance(Command, list):
Command = Command.split()
+ Command = ' '.join(Command)
Proc = None
EndOfProcedure = None
try:
# launch the command
- Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1)
+ Proc = Popen(Command, stdout=PIPE, stderr=PIPE, env=os.environ, cwd=WorkingDir, bufsize=-1, shell=True)
# launch two threads to read the STDOUT and STDERR
EndOfProcedure = Event()
@@ -287,6 +295,7 @@ def LaunchCommand(Command, WorkingDir):
Proc.wait()
except: # in case of aborting
# terminate the threads redirecting the program output
+ EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
if EndOfProcedure != None:
EndOfProcedure.set()
if Proc == None:
@@ -303,6 +312,14 @@ def LaunchCommand(Command, WorkingDir):
if Proc.returncode != 0:
if type(Command) != type(""):
Command = " ".join(Command)
+ # print out the Response file and its content when make failure
+ RespFile = os.path.join(WorkingDir, 'OUTPUT', 'respfilelist.txt')
+ if os.path.isfile(RespFile):
+ f = open(RespFile)
+ RespContent = f.read()
+ f.close()
+ EdkLogger.info(RespContent)
+
EdkLogger.error("build", COMMAND_FAILURE, ExtraData="%s [%s]" % (Command, WorkingDir))
## The smallest unit that can be built in multi-thread build mode
@@ -746,6 +763,7 @@ class Build():
self.BuildReport = BuildReport(BuildOptions.ReportFile, BuildOptions.ReportType)
self.TargetTxt = TargetTxtClassObject()
self.ToolDef = ToolDefClassObject()
+ GlobalData.BuildOptionPcd = BuildOptions.OptionPcd
#Set global flag for build mode
GlobalData.gIgnoreSource = BuildOptions.IgnoreSources
@@ -758,8 +776,11 @@ class Build():
# This also handles someone specifying the Conf directory in the workspace. Using --conf=Conf
ConfDirectoryPath = mws.join(self.WorkspaceDir, ConfDirectoryPath)
else:
- # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf
- ConfDirectoryPath = mws.join(self.WorkspaceDir, 'Conf')
+ if "CONF_PATH" in os.environ:
+ ConfDirectoryPath = os.path.normcase(os.path.normpath(os.environ["CONF_PATH"]))
+ else:
+ # Get standard WORKSPACE/Conf use the absolute path to the WORKSPACE/Conf
+ ConfDirectoryPath = mws.join(self.WorkspaceDir, 'Conf')
GlobalData.gConfDirectory = ConfDirectoryPath
GlobalData.gDatabasePath = os.path.normpath(os.path.join(ConfDirectoryPath, GlobalData.gDatabasePath))
@@ -769,15 +790,20 @@ class Build():
self.Db = WorkspaceDatabase(GlobalData.gDatabasePath, self.Reparse)
self.BuildDatabase = self.Db.BuildObject
self.Platform = None
+ self.ToolChainFamily = None
self.LoadFixAddress = 0
self.UniFlag = BuildOptions.Flag
self.BuildModules = []
+ self.Db_Flag = False
+ self.LaunchPrebuildFlag = False
+ self.PrebuildScript = ''
+ self.PostbuildScript = ''
+ self.PlatformBuildPath = os.path.join(GlobalData.gConfDirectory,'.cache', '.PlatformBuild')
+ if BuildOptions.CommandLength:
+ GlobalData.gCommandMaxLength = BuildOptions.CommandLength
# print dot character during doing some time-consuming work
self.Progress = Utils.Progressor()
-
- self.InitBuild()
-
# print current build environment and configuration
EdkLogger.quiet("%-16s = %s" % ("WORKSPACE", os.environ["WORKSPACE"]))
if "PACKAGES_PATH" in os.environ:
@@ -790,9 +816,21 @@ class Build():
if "EDK_TOOLS_BIN" in os.environ:
# Print the same path style with WORKSPACE env.
EdkLogger.quiet("%-16s = %s" % ("EDK_TOOLS_BIN", os.path.normcase(os.path.normpath(os.environ["EDK_TOOLS_BIN"]))))
+ EdkLogger.quiet("%-16s = %s" % ("CONF_PATH", GlobalData.gConfDirectory))
+ self.InitPreBuild()
+ self.InitPostBuild()
+ if self.PrebuildScript:
+ EdkLogger.quiet("%-16s = %s" % ("PREBUILD", self.PrebuildScript))
+ if self.PostbuildScript:
+ EdkLogger.quiet("%-16s = %s" % ("POSTBUILD", self.PostbuildScript))
+ if self.PrebuildScript:
+ self.LaunchPrebuild()
+ self.TargetTxt = TargetTxtClassObject()
+ self.ToolDef = ToolDefClassObject()
+ if not (self.LaunchPrebuildFlag and os.path.exists(self.PlatformBuildPath)):
+ self.InitBuild()
EdkLogger.info("")
-
os.chdir(self.WorkspaceDir)
## Load configuration
@@ -847,6 +885,17 @@ class Build():
else:
self.ToolChainList = NewToolChainList
+ ToolChainFamily = []
+ ToolDefinition = self.ToolDef.ToolsDefTxtDatabase
+ for Tool in self.ToolChainList:
+ if TAB_TOD_DEFINES_FAMILY not in ToolDefinition or Tool not in ToolDefinition[TAB_TOD_DEFINES_FAMILY] \
+ or not ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool]:
+ EdkLogger.warn("No tool chain family found in configuration for %s. Default to MSFT." % Tool)
+ ToolChainFamily.append("MSFT")
+ else:
+ ToolChainFamily.append(ToolDefinition[TAB_TOD_DEFINES_FAMILY][Tool])
+ self.ToolChainFamily = ToolChainFamily
+
if self.ThreadNumber == None:
self.ThreadNumber = self.TargetTxt.TargetTxtDictionary[DataType.TAB_TAT_DEFINES_MAX_CONCURRENT_THREAD_NUMBER]
if self.ThreadNumber == '':
@@ -890,8 +939,173 @@ class Build():
EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)
# create metafile database
- self.Db.InitDatabase()
+ if not self.Db_Flag:
+ self.Db.InitDatabase()
+
+ def InitPreBuild(self):
+ self.LoadConfiguration()
+ ErrorCode, ErrorInfo = self.PlatformFile.Validate(".dsc", False)
+ if ErrorCode != 0:
+ EdkLogger.error("build", ErrorCode, ExtraData=ErrorInfo)
+ if self.BuildTargetList:
+ GlobalData.gGlobalDefines['TARGET'] = self.BuildTargetList[0]
+ if self.ArchList:
+ GlobalData.gGlobalDefines['ARCH'] = self.ArchList[0]
+ if self.ToolChainList:
+ GlobalData.gGlobalDefines['TOOLCHAIN'] = self.ToolChainList[0]
+ GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = self.ToolChainList[0]
+ if self.ToolChainFamily:
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[0]
+ if 'PREBUILD' in GlobalData.gCommandLineDefines.keys():
+ self.Prebuild = GlobalData.gCommandLineDefines.get('PREBUILD')
+ else:
+ self.Db.InitDatabase()
+ self.Db_Flag = True
+ Platform = self.Db._MapPlatform(str(self.PlatformFile))
+ self.Prebuild = str(Platform.Prebuild)
+ if self.Prebuild:
+ PrebuildList = self.Prebuild.split()
+ if not os.path.isabs(PrebuildList[0]):
+ PrebuildList[0] = mws.join(self.WorkspaceDir, PrebuildList[0])
+ if os.path.isfile(PrebuildList[0]):
+ self.PrebuildScript = PrebuildList[0]
+ self.Prebuild = ' '.join(PrebuildList)
+ self.Prebuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList)
+ #self.LaunchPrebuild()
+ else:
+ EdkLogger.error("Prebuild", PREBUILD_ERROR, "the prebuild script %s is not exist.\n If you'd like to disable the Prebuild process, please use the format: -D PREBUILD=\"\" " %(PrebuildList[0]))
+ def InitPostBuild(self):
+ if 'POSTBUILD' in GlobalData.gCommandLineDefines.keys():
+ self.Postbuild = GlobalData.gCommandLineDefines.get('POSTBUILD')
+ else:
+ Platform = self.Db._MapPlatform(str(self.PlatformFile))
+ self.Postbuild = str(Platform.Postbuild)
+ if self.Postbuild:
+ PostbuildList = self.Postbuild.split()
+ if not os.path.isabs(PostbuildList[0]):
+ PostbuildList[0] = mws.join(self.WorkspaceDir, PostbuildList[0])
+ if os.path.isfile(PostbuildList[0]):
+ self.PostbuildScript = PostbuildList[0]
+ self.Postbuild = ' '.join(PostbuildList)
+ self.Postbuild += self.PassCommandOption(self.BuildTargetList, self.ArchList, self.ToolChainList)
+ else:
+ EdkLogger.error("Postbuild", POSTBUILD_ERROR, "the postbuild script %s is not exist.\n If you'd like to disable the Postbuild process, please use the format: -D POSTBUILD=\"\" " %(PostbuildList[0]))
+
+ def PassCommandOption(self, BuildTarget, TargetArch, ToolChain):
+ BuildStr = ''
+ if GlobalData.gCommand and isinstance(GlobalData.gCommand, list):
+ BuildStr += ' ' + ' '.join(GlobalData.gCommand)
+ TargetFlag = False
+ ArchFlag = False
+ ToolChainFlag = False
+
+ if GlobalData.gOptions and not GlobalData.gOptions.BuildTarget:
+ TargetFlag = True
+ if GlobalData.gOptions and not GlobalData.gOptions.TargetArch:
+ ArchFlag = True
+ if GlobalData.gOptions and not GlobalData.gOptions.ToolChain:
+ ToolChainFlag = True
+
+ if TargetFlag and BuildTarget:
+ if isinstance(BuildTarget, list) or isinstance(BuildTarget, tuple):
+ BuildStr += ' -b ' + ' -b '.join(BuildTarget)
+ elif isinstance(BuildTarget, str):
+ BuildStr += ' -b ' + BuildTarget
+ if ArchFlag and TargetArch:
+ if isinstance(TargetArch, list) or isinstance(TargetArch, tuple):
+ BuildStr += ' -a ' + ' -a '.join(TargetArch)
+ elif isinstance(TargetArch, str):
+ BuildStr += ' -a ' + TargetArch
+ if ToolChainFlag and ToolChain:
+ if isinstance(ToolChain, list) or isinstance(ToolChain, tuple):
+ BuildStr += ' -t ' + ' -t '.join(ToolChain)
+ elif isinstance(ToolChain, str):
+ BuildStr += ' -t ' + ToolChain
+
+ return BuildStr
+
+ def LaunchPrebuild(self):
+ if self.Prebuild:
+ EdkLogger.info("\n- Prebuild Start -\n")
+ self.LaunchPrebuildFlag = True
+ PrebuildEnvFile = os.path.join(GlobalData.gConfDirectory,'.cache','.PrebuildEnv')
+ if os.path.isfile(PrebuildEnvFile):
+ os.remove(PrebuildEnvFile)
+ if os.path.isfile(self.PlatformBuildPath):
+ os.remove(self.PlatformBuildPath)
+ if sys.platform == "win32":
+ args = ' && '.join((self.Prebuild, 'set > ' + PrebuildEnvFile))
+ Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)
+ else:
+ args = ' && '.join((self.Prebuild, 'env > ' + PrebuildEnvFile))
+ Process = Popen(args, stdout=PIPE, stderr=PIPE, shell=True)
+
+ # launch two threads to read the STDOUT and STDERR
+ EndOfProcedure = Event()
+ EndOfProcedure.clear()
+ if Process.stdout:
+ StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))
+ StdOutThread.setName("STDOUT-Redirector")
+ StdOutThread.setDaemon(False)
+ StdOutThread.start()
+
+ if Process.stderr:
+ StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))
+ StdErrThread.setName("STDERR-Redirector")
+ StdErrThread.setDaemon(False)
+ StdErrThread.start()
+ # waiting for program exit
+ Process.wait()
+
+ if Process.stdout:
+ StdOutThread.join()
+ if Process.stderr:
+ StdErrThread.join()
+ if Process.returncode != 0 :
+ EdkLogger.error("Prebuild", PREBUILD_ERROR, 'Prebuild process is not success!')
+
+ if os.path.exists(PrebuildEnvFile):
+ f = open(PrebuildEnvFile)
+ envs = f.readlines()
+ f.close()
+ envs = itertools.imap(lambda l: l.split('=',1), envs)
+ envs = itertools.ifilter(lambda l: len(l) == 2, envs)
+ envs = itertools.imap(lambda l: [i.strip() for i in l], envs)
+ os.environ.update(dict(envs))
+ EdkLogger.info("\n- Prebuild Done -\n")
+
+ def LaunchPostbuild(self):
+ if self.Postbuild:
+ EdkLogger.info("\n- Postbuild Start -\n")
+ if sys.platform == "win32":
+ Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)
+ else:
+ Process = Popen(self.Postbuild, stdout=PIPE, stderr=PIPE, shell=True)
+ # launch two threads to read the STDOUT and STDERR
+ EndOfProcedure = Event()
+ EndOfProcedure.clear()
+ if Process.stdout:
+ StdOutThread = Thread(target=ReadMessage, args=(Process.stdout, EdkLogger.info, EndOfProcedure))
+ StdOutThread.setName("STDOUT-Redirector")
+ StdOutThread.setDaemon(False)
+ StdOutThread.start()
+
+ if Process.stderr:
+ StdErrThread = Thread(target=ReadMessage, args=(Process.stderr, EdkLogger.quiet, EndOfProcedure))
+ StdErrThread.setName("STDERR-Redirector")
+ StdErrThread.setDaemon(False)
+ StdErrThread.start()
+ # waiting for program exit
+ Process.wait()
+
+ if Process.stdout:
+ StdOutThread.join()
+ if Process.stderr:
+ StdErrThread.join()
+ if Process.returncode != 0 :
+ EdkLogger.error("Postbuild", POSTBUILD_ERROR, 'Postbuild process is not success!')
+ EdkLogger.info("\n- Postbuild Done -\n")
## Build a module or platform
#
# Create autogen code and makefile for a module or platform, and the launch
@@ -1122,13 +1336,13 @@ class Build():
# Update Image to new BaseAddress by GenFw tool
#
LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)
- LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
+ LaunchCommand(["GenFw", "--rebase", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
else:
#
# Set new address to the section header only for SMM driver.
#
LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleOutputImage], ModuleInfo.OutputDir)
- LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
+ LaunchCommand(["GenFw", "--address", str(BaseAddress), "-r", ModuleDebugImage], ModuleInfo.DebugDir)
#
# Collect funtion address from Map file
#
@@ -1136,7 +1350,7 @@ class Build():
FunctionList = []
if os.path.exists(ImageMapTable):
OrigImageBaseAddress = 0
- ImageMap = open (ImageMapTable, 'r')
+ ImageMap = open(ImageMapTable, 'r')
for LinStr in ImageMap:
if len (LinStr.strip()) == 0:
continue
@@ -1149,7 +1363,7 @@ class Build():
StrList = LinStr.split()
if len (StrList) > 4:
- if StrList[3] == 'f' or StrList[3] =='F':
+ if StrList[3] == 'f' or StrList[3] == 'F':
Name = StrList[1]
RelativeAddress = int (StrList[2], 16) - OrigImageBaseAddress
FunctionList.append ((Name, RelativeAddress))
@@ -1273,7 +1487,7 @@ class Build():
if not ImageClass.IsValid:
EdkLogger.error("build", FILE_PARSE_FAILURE, ExtraData=ImageClass.ErrorInfo)
ImageInfo = PeImageInfo(Module.Name, Module.Guid, Module.Arch, Module.OutputDir, Module.DebugDir, ImageClass)
- if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER','PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
+ if Module.ModuleType in ['PEI_CORE', 'PEIM', 'COMBINED_PEIM_DRIVER', 'PIC_PEIM', 'RELOCATABLE_PEIM', 'DXE_CORE']:
PeiModuleList[Module.MetaFile] = ImageInfo
PeiSize += ImageInfo.Image.Size
elif Module.ModuleType in ['BS_DRIVER', 'DXE_DRIVER', 'UEFI_DRIVER']:
@@ -1285,7 +1499,7 @@ class Build():
if IsIpfPlatform and ImageInfo.Image.Size % 0x2000 != 0:
ImageInfo.Image.Size = (ImageInfo.Image.Size / 0x2000 + 1) * 0x2000
RtSize += ImageInfo.Image.Size
- elif Module.ModuleType in ['SMM_CORE', 'DXE_SMM_DRIVER']:
+ elif Module.ModuleType in ['SMM_CORE', 'DXE_SMM_DRIVER', 'MM_STANDALONE', 'MM_CORE_STANDALONE']:
SmmModuleList[Module.MetaFile] = ImageInfo
SmmSize += ImageInfo.Image.Size
if Module.ModuleType == 'DXE_SMM_DRIVER':
@@ -1354,21 +1568,21 @@ class Build():
for PcdInfo in PcdTable:
ReturnValue = 0
if PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE:
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize/0x1000))
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_PEI_PAGE_SIZE_DATA_TYPE, str (PeiSize / 0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE:
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize/0x1000))
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_DXE_PAGE_SIZE_DATA_TYPE, str (BtSize / 0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE:
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize/0x1000))
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_RUNTIME_PAGE_SIZE_DATA_TYPE, str (RtSize / 0x1000))
elif PcdInfo[0] == TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE and len (SmmModuleList) > 0:
- ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize/0x1000))
+ ReturnValue, ErrorInfo = PatchBinaryFile (EfiImage, PcdInfo[1], TAB_PCDS_PATCHABLE_LOAD_FIX_ADDRESS_SMM_PAGE_SIZE_DATA_TYPE, str (SmmSize / 0x1000))
if ReturnValue != 0:
EdkLogger.error("build", PARAMETER_INVALID, "Patch PCD value failed", ExtraData=ErrorInfo)
- MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize/0x1000))
- MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize/0x1000))
- MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize/0x1000))
+ MapBuffer.write('PEI_CODE_PAGE_NUMBER = 0x%x\n' % (PeiSize / 0x1000))
+ MapBuffer.write('BOOT_CODE_PAGE_NUMBER = 0x%x\n' % (BtSize / 0x1000))
+ MapBuffer.write('RUNTIME_CODE_PAGE_NUMBER = 0x%x\n' % (RtSize / 0x1000))
if len (SmmModuleList) > 0:
- MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize/0x1000))
+ MapBuffer.write('SMM_CODE_PAGE_NUMBER = 0x%x\n' % (SmmSize / 0x1000))
PeiBaseAddr = TopMemoryAddress - RtSize - BtSize
BtBaseAddr = TopMemoryAddress - RtSize
@@ -1377,7 +1591,7 @@ class Build():
self._RebaseModule (MapBuffer, PeiBaseAddr, PeiModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, BtBaseAddr, BtModuleList, TopMemoryAddress == 0)
self._RebaseModule (MapBuffer, RtBaseAddr, RtModuleList, TopMemoryAddress == 0)
- self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset = False, ModeIsSmm = True)
+ self._RebaseModule (MapBuffer, 0x1000, SmmModuleList, AddrIsOffset=False, ModeIsSmm=True)
MapBuffer.write('\n\n')
sys.stdout.write ("\n")
sys.stdout.flush()
@@ -1395,17 +1609,21 @@ class Build():
SaveFileOnChange(MapFilePath, MapBuffer.getvalue(), False)
MapBuffer.close()
if self.LoadFixAddress != 0:
- sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" %(MapFilePath))
+ sys.stdout.write ("\nLoad Module At Fix Address Map file can be found at %s\n" % (MapFilePath))
sys.stdout.flush()
## Build active platform for different build targets and different tool chains
#
def _BuildPlatform(self):
+ SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
+ index = 0
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]
+ index += 1
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
@@ -1483,9 +1701,12 @@ class Build():
def _BuildModule(self):
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
+ index = 0
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]
+ index += 1
#
# module build needs platform build information, so get platform
# AutoGen first
@@ -1515,12 +1736,15 @@ class Build():
MaList = []
for Arch in Wa.ArchList:
GlobalData.gGlobalDefines['ARCH'] = Arch
- Ma = ModuleAutoGen(Wa, self.ModuleFile, BuildTarget, ToolChain, Arch, self.PlatformFile)
- if Ma == None: continue
- MaList.append(Ma)
- self.BuildModules.append(Ma)
- if not Ma.IsBinaryModule:
- self._Build(self.Target, Ma, BuildModule=True)
+ Pa = PlatformAutoGen(Wa, self.PlatformFile, BuildTarget, ToolChain, Arch)
+ for Module in Pa.Platform.Modules:
+ if self.ModuleFile.Dir == Module.Dir and self.ModuleFile.File == Module.File:
+ Ma = ModuleAutoGen(Wa, Module, BuildTarget, ToolChain, Arch, self.PlatformFile)
+ if Ma == None: continue
+ MaList.append(Ma)
+ self.BuildModules.append(Ma)
+ if not Ma.IsBinaryModule:
+ self._Build(self.Target, Ma, BuildModule=True)
self.BuildReport.AddPlatformReport(Wa, MaList)
if MaList == []:
@@ -1529,7 +1753,7 @@ class Build():
BUILD_ERROR,
"Module for [%s] is not a component of active platform."\
" Please make sure that the ARCH and inf file path are"\
- " given in the same as in [%s]" %\
+ " given in the same as in [%s]" % \
(', '.join(Wa.ArchList), self.PlatformFile),
ExtraData=self.ModuleFile
)
@@ -1574,11 +1798,15 @@ class Build():
## Build a platform in multi-thread mode
#
def _MultiThreadBuildPlatform(self):
+ SaveFileOnChange(self.PlatformBuildPath, '# DO NOT EDIT \n# FILE auto-generated\n', False)
for BuildTarget in self.BuildTargetList:
GlobalData.gGlobalDefines['TARGET'] = BuildTarget
+ index = 0
for ToolChain in self.ToolChainList:
GlobalData.gGlobalDefines['TOOLCHAIN'] = ToolChain
GlobalData.gGlobalDefines['TOOL_CHAIN_TAG'] = ToolChain
+ GlobalData.gGlobalDefines['FAMILY'] = self.ToolChainFamily[index]
+ index += 1
Wa = WorkspaceAutoGen(
self.WorkspaceDir,
self.PlatformFile,
@@ -1874,8 +2102,8 @@ def SingleCheckCallback(option, opt_str, value, parser):
# @retval Args Target of build command
#
def MyOptionParser():
- Parser = OptionParser(description=__copyright__,version=__version__,prog="build.exe",usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
- Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32','X64','IPF','EBC','ARM', 'AARCH64'], dest="TargetArch",
+ Parser = OptionParser(description=__copyright__, version=__version__, prog="build.exe", usage="%prog [options] [all|fds|genc|genmake|clean|cleanall|cleanlib|modules|libraries|run]")
+ Parser.add_option("-a", "--arch", action="append", type="choice", choices=['IA32', 'X64', 'IPF', 'EBC', 'ARM', 'AARCH64'], dest="TargetArch",
help="ARCHS is one of list: IA32, X64, IPF, ARM, AARCH64 or EBC, which overrides target.txt's TARGET_ARCH definition. To specify more archs, please repeat this option.")
Parser.add_option("-p", "--platform", action="callback", type="string", dest="PlatformFile", callback=SingleCheckCallback,
help="Build the platform specified by the DSC file name argument, overriding target.txt's ACTIVE_PLATFORM definition.")
@@ -1917,8 +2145,8 @@ def MyOptionParser():
Parser.add_option("-D", "--define", action="append", type="string", dest="Macros", help="Macro: \"Name [= Value]\".")
Parser.add_option("-y", "--report-file", action="store", dest="ReportFile", help="Create/overwrite the report to the specified filename.")
- Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS', 'EXECUTION_ORDER'], dest="ReportType", default=[],
- help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, EXECUTION_ORDER]. "\
+ Parser.add_option("-Y", "--report-type", action="append", type="choice", choices=['PCD','LIBRARY','FLASH','DEPEX','BUILD_FLAGS','FIXED_ADDRESS','HASH','EXECUTION_ORDER'], dest="ReportType", default=[],
+ help="Flags that control the type of build report to generate. Must be one of: [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS, HASH, EXECUTION_ORDER]. "\
"To specify more than one flag, repeat this option on the command line and the default flag set is [PCD, LIBRARY, FLASH, DEPEX, BUILD_FLAGS, FIXED_ADDRESS]")
Parser.add_option("-F", "--flag", action="store", type="string", dest="Flag",
help="Specify the specific option to parse EDK UNI file. Must be one of: [-c, -s]. -c is for EDK framework UNI file, and -s is for EDK UEFI UNI file. "\
@@ -1928,8 +2156,10 @@ def MyOptionParser():
Parser.add_option("--conf", action="store", type="string", dest="ConfDirectory", help="Specify the customized Conf directory.")
Parser.add_option("--check-usage", action="store_true", dest="CheckUsage", default=False, help="Check usage content of entries listed in INF file.")
Parser.add_option("--ignore-sources", action="store_true", dest="IgnoreSources", default=False, help="Focus to a binary build and ignore all source files")
+ Parser.add_option("--pcd", action="append", dest="OptionPcd", help="Set PCD value by command line. Format: \"PcdName=Value\" ")
+ Parser.add_option("-l", "--cmd-len", action="store", type="int", dest="CommandLength", help="Specify the maximum line length of build command. Default is 4096.")
- (Opt, Args)=Parser.parse_args()
+ (Opt, Args) = Parser.parse_args()
return (Opt, Args)
## Tool entrance method
@@ -1946,7 +2176,7 @@ def Main():
# Initialize log system
EdkLogger.Initialize()
-
+ GlobalData.gCommand = sys.argv[1:]
#
# Parse the options and args
#
@@ -1985,13 +2215,13 @@ def Main():
Target = "all"
elif len(Target) >= 2:
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "More than one targets are not supported.",
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))
else:
Target = Target[0].lower()
if Target not in gSupportedTarget:
EdkLogger.error("build", OPTION_NOT_SUPPORTED, "Not supported target [%s]." % Target,
- ExtraData="Please select one of: %s" %(' '.join(gSupportedTarget)))
+ ExtraData="Please select one of: %s" % (' '.join(gSupportedTarget)))
#
# Check environment variable: EDK_TOOLS_PATH, WORKSPACE, PATH
@@ -2044,7 +2274,8 @@ def Main():
MyBuild = Build(Target, Workspace, Option)
GlobalData.gCommandLineDefines['ARCH'] = ' '.join(MyBuild.ArchList)
- MyBuild.Launch()
+ if not (MyBuild.LaunchPrebuildFlag and os.path.exists(MyBuild.PlatformBuildPath)):
+ MyBuild.Launch()
# Drop temp tables to avoid database locked.
for TmpTableName in TmpTableDict:
SqlCommand = """drop table IF EXISTS %s""" % TmpTableName
@@ -2069,7 +2300,7 @@ def Main():
if Option != None and Option.debug != None:
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
else:
- EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError = False)
+ EdkLogger.error(X.ToolName, FORMAT_INVALID, File=X.FileName, Line=X.LineNumber, ExtraData=X.Message, RaiseError=False)
ReturnCode = FORMAT_INVALID
except KeyboardInterrupt:
ReturnCode = ABORT_ERROR
@@ -2091,7 +2322,7 @@ def Main():
"\nbuild",
CODE_ERROR,
"Unknown fatal error when processing [%s]" % MetaFile,
- ExtraData="\n(Please send email to edk2-devel@lists.sourceforge.net for help, attaching following call stack trace!)\n",
+ ExtraData="\n(Please send email to edk2-devel@lists.01.org for help, attaching following call stack trace!)\n",
RaiseError=False
)
EdkLogger.quiet("(Python %s on %s) " % (platform.python_version(), sys.platform) + traceback.format_exc())
@@ -2101,7 +2332,11 @@ def Main():
Utils.ClearDuplicatedInf()
if ReturnCode == 0:
- Conclusion = "Done"
+ try:
+ MyBuild.LaunchPostbuild()
+ Conclusion = "Done"
+ except:
+ Conclusion = "Failed"
elif ReturnCode == ABORT_ERROR:
Conclusion = "Aborted"
else:
@@ -2110,7 +2345,7 @@ def Main():
BuildDuration = time.gmtime(int(round(FinishTime - StartTime)))
BuildDurationStr = ""
if BuildDuration.tm_yday > 1:
- BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)"%(BuildDuration.tm_yday - 1)
+ BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration) + ", %d day(s)" % (BuildDuration.tm_yday - 1)
else:
BuildDurationStr = time.strftime("%H:%M:%S", BuildDuration)
if MyBuild != None: