X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=BeagleBoardPkg%2FSec%2FSec.c;h=5b4d2946dbef39ab7e031d505e0a28779aac552d;hp=321b35940cc9a19fa80e8d6eedcbc3a56a6ced80;hb=225290eba733e5ca7149d1789ccce5ef15c38df5;hpb=2ef2b01e07c02db339f34004445734a2dbdd80e1

diff --git a/BeagleBoardPkg/Sec/Sec.c b/BeagleBoardPkg/Sec/Sec.c
index 321b35940c..5b4d2946db 100755
--- a/BeagleBoardPkg/Sec/Sec.c
+++ b/BeagleBoardPkg/Sec/Sec.c
@@ -21,11 +21,23 @@
 #include <Library/IoLib.h>
 #include <Library/OmapLib.h>
 #include <Library/ArmLib.h>
+#include <Library/PeCoffGetEntryPointLib.h>
 
 #include <Ppi/GuidedSectionExtraction.h>
 
 #include <Omap3530/Omap3530.h>
 
+VOID
+EFIAPI 
+_ModuleEntryPoint(
+  VOID
+  );
+
+CHAR8 *
+DeCygwinPathIfNeeded (
+  IN  CHAR8   *Name
+  );
+
 VOID
 PadConfiguration (
   VOID
@@ -113,6 +125,53 @@ LzmaDecompressLibConstructor (
   VOID
   );
 
+/**
+  If the build is done on cygwin the paths are cygpaths. 
+  /cygdrive/c/tmp.txt vs c:\tmp.txt so we need to convert
+  them to work with RVD commands
+
+  This is just code to help print out RVD symbol load command.
+  If you build with cygwin paths aren't compatible with RVD.
+
+  @param  Name  Path to convert if needed
+
+**/
+CHAR8 *
+SecDeCygwinPathIfNeeded (
+  IN  CHAR8   *Name
+  )
+{
+  CHAR8   *Ptr;
+  UINTN   Index;
+  UINTN   Len;
+  
+  Ptr = AsciiStrStr (Name, "/cygdrive/");
+  if (Ptr == NULL) {
+    return Name;
+  }
+  
+  Len = AsciiStrLen (Ptr);
+  
+  // convert "/cygdrive" to spaces
+  for (Index = 0; Index < 9; Index++) {
+    Ptr[Index] = ' ';
+  }
+
+  // convert /c to c:
+  Ptr[9]  = Ptr[10];
+  Ptr[10] = ':';
+  
+  // switch path seperators
+  for (Index = 11; Index < Len; Index++) {
+    if (Ptr[Index] == '/') {
+      Ptr[Index] = '\\' ;
+    }
+  }
+
+  return Name;
+}
+
+
 VOID
 CEntryPoint (
   IN  VOID  *MemoryBase,
@@ -147,7 +206,52 @@ CEntryPoint (
 
   // Start talking
   UartInit();
-  DEBUG((EFI_D_ERROR, "UART Test Line\n"));
+  DEBUG((EFI_D_ERROR, "UART Enabled\n"));
+
+  DEBUG_CODE_BEGIN ();
+    //
+    // On a debug build print out information about the SEC. This is really info about
+    // the PE/COFF file we are currently running from. Useful for loading symbols in a
+    // debugger. Remember our image is really part of the FV.
+    //
+    RETURN_STATUS       Status;
+    EFI_PEI_FV_HANDLE   VolumeHandle;
+    EFI_PEI_FILE_HANDLE FileHandle;
+    VOID                *PeCoffImage;
+    UINT32              Offset;
+    CHAR8               *FilePath;
+
+    FfsAnyFvFindFirstFile (EFI_FV_FILETYPE_SECURITY_CORE, &VolumeHandle, &FileHandle);
+    Status = FfsFindSectionData (EFI_SECTION_TE, FileHandle, &PeCoffImage);
+    if (EFI_ERROR (Status)) {
+      // Usually is a TE (PI striped down PE/COFF), but could be a full PE/COFF
+      Status = FfsFindSectionData (EFI_SECTION_PE32, FileHandle, &PeCoffImage);
+    }
+    if (!EFI_ERROR (Status)) {
+      Offset = PeCoffGetSizeOfHeaders (PeCoffImage);
+      FilePath = PeCoffLoaderGetPdbPointer (PeCoffImage);
+      if (FilePath != NULL) {
+      
+        // 
+        // In general you should never have to use #ifdef __CC_ARM in the code. It
+        // is hidden in the away in the MdePkg. But here we would like to print differnt things
+        // for different toolchains. 
+        //
+#ifdef __CC_ARM
+        // Print out the command for the RVD debugger to load symbols for this image
+        DEBUG ((EFI_D_ERROR, "load /a /ni /np %a &0x%08x\n", SecDeCygwinPathIfNeeded (FilePath), PeCoffImage + Offset));
+#elif __GNUC__
+        // This may not work correctly if you generate PE/COFF directlyas then the Offset would not be required
+        DEBUG ((EFI_D_ERROR, "add-symbol-file %a 0x%08x\n", FilePath, PeCoffImage + Offset));
+#else
+        DEBUG ((EFI_D_ERROR, "SEC starts at 0x%08x with an entry point at 0x%08x %a\n", PeCoffImage, _ModuleEntryPoint, FilePath));
+#endif
+      }
+    }
+
+   DEBUG_CODE_END ();
+
+
 
   // Start up a free running time so that the timer lib will work
   TimerInit();