X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=IntelSiliconPkg%2FIntelVTdDxe%2FIntelVTdDxe.c;fp=IntelSiliconPkg%2FIntelVTdDxe%2FIntelVTdDxe.c;h=d22222d713b8060c889a7fc61df9ad0fc5f57580;hp=0000000000000000000000000000000000000000;hb=c049fc99098b08a4a5bae38ff5f06cce8904fc03;hpb=b7ff5027fed581ef8a94b577b8c44afde4d4178b
diff --git a/IntelSiliconPkg/IntelVTdDxe/IntelVTdDxe.c b/IntelSiliconPkg/IntelVTdDxe/IntelVTdDxe.c
new file mode 100644
index 0000000000..d22222d713
--- /dev/null
+++ b/IntelSiliconPkg/IntelVTdDxe/IntelVTdDxe.c
@@ -0,0 +1,353 @@
+/** @file
+ Intel VTd driver.
+
+ Copyright (c) 2017, Intel Corporation. All rights reserved.
+ This program and the accompanying materials
+ are licensed and made available under the terms and conditions of the BSD License
+ which accompanies this distribution. The full text of the license may be found at
+ http://opensource.org/licenses/bsd-license.php
+
+ THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
+ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+
+**/
+
+#include
+
+#include
+#include
+
+#include
+#include
+#include
+#include
+
+#include "DmaProtection.h"
+
+/**
+ Provides the controller-specific addresses required to access system memory from a
+ DMA bus master.
+
+ @param This The protocol instance pointer.
+ @param Operation Indicates if the bus master is going to read or write to system memory.
+ @param HostAddress The system memory address to map to the PCI controller.
+ @param NumberOfBytes On input the number of bytes to map. On output the number of bytes
+ that were mapped.
+ @param DeviceAddress The resulting map address for the bus master PCI controller to use to
+ access the hosts HostAddress.
+ @param Mapping A resulting value to pass to Unmap().
+
+ @retval EFI_SUCCESS The range was mapped for the returned NumberOfBytes.
+ @retval EFI_UNSUPPORTED The HostAddress cannot be mapped as a common buffer.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The request could not be completed due to a lack of resources.
+ @retval EFI_DEVICE_ERROR The system hardware could not map the requested address.
+
+**/
+EFI_STATUS
+EFIAPI
+IoMmuMap (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN EDKII_IOMMU_OPERATION Operation,
+ IN VOID *HostAddress,
+ IN OUT UINTN *NumberOfBytes,
+ OUT EFI_PHYSICAL_ADDRESS *DeviceAddress,
+ OUT VOID **Mapping
+ );
+
+/**
+ Completes the Map() operation and releases any corresponding resources.
+
+ @param This The protocol instance pointer.
+ @param Mapping The mapping value returned from Map().
+
+ @retval EFI_SUCCESS The range was unmapped.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_DEVICE_ERROR The data was not committed to the target system memory.
+**/
+EFI_STATUS
+EFIAPI
+IoMmuUnmap (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN VOID *Mapping
+ );
+
+/**
+ Allocates pages that are suitable for an OperationBusMasterCommonBuffer or
+ OperationBusMasterCommonBuffer64 mapping.
+
+ @param This The protocol instance pointer.
+ @param Type This parameter is not used and must be ignored.
+ @param MemoryType The type of memory to allocate, EfiBootServicesData or
+ EfiRuntimeServicesData.
+ @param Pages The number of pages to allocate.
+ @param HostAddress A pointer to store the base system memory address of the
+ allocated range.
+ @param Attributes The requested bit mask of attributes for the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were allocated.
+ @retval EFI_UNSUPPORTED Attributes is unsupported. The only legal attribute bits are
+ MEMORY_WRITE_COMBINE and MEMORY_CACHED.
+ @retval EFI_INVALID_PARAMETER One or more parameters are invalid.
+ @retval EFI_OUT_OF_RESOURCES The memory pages could not be allocated.
+
+**/
+EFI_STATUS
+EFIAPI
+IoMmuAllocateBuffer (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN EFI_ALLOCATE_TYPE Type,
+ IN EFI_MEMORY_TYPE MemoryType,
+ IN UINTN Pages,
+ IN OUT VOID **HostAddress,
+ IN UINT64 Attributes
+ );
+
+/**
+ Frees memory that was allocated with AllocateBuffer().
+
+ @param This The protocol instance pointer.
+ @param Pages The number of pages to free.
+ @param HostAddress The base system memory address of the allocated range.
+
+ @retval EFI_SUCCESS The requested memory pages were freed.
+ @retval EFI_INVALID_PARAMETER The memory range specified by HostAddress and Pages
+ was not allocated with AllocateBuffer().
+
+**/
+EFI_STATUS
+EFIAPI
+IoMmuFreeBuffer (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN UINTN Pages,
+ IN VOID *HostAddress
+ );
+
+/**
+ Convert the DeviceHandle to SourceId and Segment.
+
+ @param[in] DeviceHandle The device who initiates the DMA access request.
+ @param[out] Segment The Segment used to identify a VTd engine.
+ @param[out] SourceId The SourceId used to identify a VTd engine and table entry.
+
+ @retval EFI_SUCCESS The Segment and SourceId are returned.
+ @retval EFI_INVALID_PARAMETER DeviceHandle is an invalid handle.
+ @retval EFI_UNSUPPORTED DeviceHandle is unknown by the IOMMU.
+**/
+EFI_STATUS
+DeviceHandleToSourceId (
+ IN EFI_HANDLE DeviceHandle,
+ OUT UINT16 *Segment,
+ OUT VTD_SOURCE_ID *SourceId
+ )
+{
+ EFI_PCI_IO_PROTOCOL *PciIo;
+ UINTN Seg;
+ UINTN Bus;
+ UINTN Dev;
+ UINTN Func;
+ EFI_STATUS Status;
+ EDKII_PLATFORM_VTD_DEVICE_INFO DeviceInfo;
+
+ Status = EFI_NOT_FOUND;
+ if (mPlatformVTdPolicy != NULL) {
+ Status = mPlatformVTdPolicy->GetDeviceId (mPlatformVTdPolicy, DeviceHandle, &DeviceInfo);
+ if (!EFI_ERROR(Status)) {
+ *Segment = DeviceInfo.Segment;
+ *SourceId = DeviceInfo.SourceId;
+ return EFI_SUCCESS;
+ }
+ }
+
+ Status = gBS->HandleProtocol (DeviceHandle, &gEfiPciIoProtocolGuid, (VOID **)&PciIo);
+ if (EFI_ERROR(Status)) {
+ return EFI_UNSUPPORTED;
+ }
+ Status = PciIo->GetLocation (PciIo, &Seg, &Bus, &Dev, &Func);
+ if (EFI_ERROR(Status)) {
+ return EFI_UNSUPPORTED;
+ }
+ *Segment = (UINT16)Seg;
+ SourceId->Bits.Bus = (UINT8)Bus;
+ SourceId->Bits.Device = (UINT8)Dev;
+ SourceId->Bits.Function = (UINT8)Func;
+
+ return EFI_SUCCESS;
+}
+
+/**
+ Set IOMMU attribute for a system memory.
+
+ If the IOMMU protocol exists, the system memory cannot be used
+ for DMA by default.
+
+ When a device requests a DMA access for a system memory,
+ the device driver need use SetAttribute() to update the IOMMU
+ attribute to request DMA access (read and/or write).
+
+ The DeviceHandle is used to identify which device submits the request.
+ The IOMMU implementation need translate the device path to an IOMMU device ID,
+ and set IOMMU hardware register accordingly.
+ 1) DeviceHandle can be a standard PCI device.
+ The memory for BusMasterRead need set EDKII_IOMMU_ACCESS_READ.
+ The memory for BusMasterWrite need set EDKII_IOMMU_ACCESS_WRITE.
+ The memory for BusMasterCommonBuffer need set EDKII_IOMMU_ACCESS_READ|EDKII_IOMMU_ACCESS_WRITE.
+ After the memory is used, the memory need set 0 to keep it being protected.
+ 2) DeviceHandle can be an ACPI device (ISA, I2C, SPI, etc).
+ The memory for DMA access need set EDKII_IOMMU_ACCESS_READ and/or EDKII_IOMMU_ACCESS_WRITE.
+
+ @param[in] This The protocol instance pointer.
+ @param[in] DeviceHandle The device who initiates the DMA access request.
+ @param[in] DeviceAddress The base of device memory address to be used as the DMA memory.
+ @param[in] Length The length of device memory address to be used as the DMA memory.
+ @param[in] IoMmuAccess The IOMMU access.
+
+ @retval EFI_SUCCESS The IoMmuAccess is set for the memory range specified by DeviceAddress and Length.
+ @retval EFI_INVALID_PARAMETER DeviceHandle is an invalid handle.
+ @retval EFI_INVALID_PARAMETER DeviceAddress is not IoMmu Page size aligned.
+ @retval EFI_INVALID_PARAMETER Length is not IoMmu Page size aligned.
+ @retval EFI_INVALID_PARAMETER Length is 0.
+ @retval EFI_INVALID_PARAMETER IoMmuAccess specified an illegal combination of access.
+ @retval EFI_UNSUPPORTED DeviceHandle is unknown by the IOMMU.
+ @retval EFI_UNSUPPORTED The bit mask of IoMmuAccess is not supported by the IOMMU.
+ @retval EFI_UNSUPPORTED The IOMMU does not support the memory range specified by DeviceAddress and Length.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to modify the IOMMU access.
+ @retval EFI_DEVICE_ERROR The IOMMU device reported an error while attempting the operation.
+
+**/
+EFI_STATUS
+VTdSetAttribute (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN EFI_PHYSICAL_ADDRESS DeviceAddress,
+ IN UINT64 Length,
+ IN UINT64 IoMmuAccess
+ )
+{
+ EFI_STATUS Status;
+ UINT16 Segment;
+ VTD_SOURCE_ID SourceId;
+
+ DumpVtdIfError ();
+
+ Status = DeviceHandleToSourceId (DeviceHandle, &Segment, &SourceId);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+
+ DEBUG ((DEBUG_VERBOSE, "IoMmuSetAttribute: "));
+ DEBUG ((DEBUG_VERBOSE, "PCI(S%x.B%x.D%x.F%x) ", Segment, SourceId.Bits.Bus, SourceId.Bits.Device, SourceId.Bits.Function));
+ DEBUG ((DEBUG_VERBOSE, "(0x%lx~0x%lx) - %lx\n", DeviceAddress, Length, IoMmuAccess));
+
+ Status = SetAccessAttribute (Segment, SourceId, DeviceAddress, Length, IoMmuAccess);
+
+ return Status;
+}
+
+/**
+ Set IOMMU attribute for a system memory.
+
+ If the IOMMU protocol exists, the system memory cannot be used
+ for DMA by default.
+
+ When a device requests a DMA access for a system memory,
+ the device driver need use SetAttribute() to update the IOMMU
+ attribute to request DMA access (read and/or write).
+
+ The DeviceHandle is used to identify which device submits the request.
+ The IOMMU implementation need translate the device path to an IOMMU device ID,
+ and set IOMMU hardware register accordingly.
+ 1) DeviceHandle can be a standard PCI device.
+ The memory for BusMasterRead need set EDKII_IOMMU_ACCESS_READ.
+ The memory for BusMasterWrite need set EDKII_IOMMU_ACCESS_WRITE.
+ The memory for BusMasterCommonBuffer need set EDKII_IOMMU_ACCESS_READ|EDKII_IOMMU_ACCESS_WRITE.
+ After the memory is used, the memory need set 0 to keep it being protected.
+ 2) DeviceHandle can be an ACPI device (ISA, I2C, SPI, etc).
+ The memory for DMA access need set EDKII_IOMMU_ACCESS_READ and/or EDKII_IOMMU_ACCESS_WRITE.
+
+ @param[in] This The protocol instance pointer.
+ @param[in] DeviceHandle The device who initiates the DMA access request.
+ @param[in] Mapping The mapping value returned from Map().
+ @param[in] IoMmuAccess The IOMMU access.
+
+ @retval EFI_SUCCESS The IoMmuAccess is set for the memory range specified by DeviceAddress and Length.
+ @retval EFI_INVALID_PARAMETER DeviceHandle is an invalid handle.
+ @retval EFI_INVALID_PARAMETER Mapping is not a value that was returned by Map().
+ @retval EFI_INVALID_PARAMETER IoMmuAccess specified an illegal combination of access.
+ @retval EFI_UNSUPPORTED DeviceHandle is unknown by the IOMMU.
+ @retval EFI_UNSUPPORTED The bit mask of IoMmuAccess is not supported by the IOMMU.
+ @retval EFI_UNSUPPORTED The IOMMU does not support the memory range specified by Mapping.
+ @retval EFI_OUT_OF_RESOURCES There are not enough resources available to modify the IOMMU access.
+ @retval EFI_DEVICE_ERROR The IOMMU device reported an error while attempting the operation.
+
+**/
+EFI_STATUS
+EFIAPI
+IoMmuSetAttribute (
+ IN EDKII_IOMMU_PROTOCOL *This,
+ IN EFI_HANDLE DeviceHandle,
+ IN VOID *Mapping,
+ IN UINT64 IoMmuAccess
+ )
+{
+ EFI_STATUS Status;
+ EFI_PHYSICAL_ADDRESS DeviceAddress;
+ UINTN NumberOfPages;
+
+ Status = GetDeviceInfoFromMapping (Mapping, &DeviceAddress, &NumberOfPages);
+ if (EFI_ERROR(Status)) {
+ return Status;
+ }
+ Status = VTdSetAttribute (
+ This,
+ DeviceHandle,
+ DeviceAddress,
+ EFI_PAGES_TO_SIZE(NumberOfPages),
+ IoMmuAccess
+ );
+
+ return Status;
+}
+
+EDKII_IOMMU_PROTOCOL mIntelVTd = {
+ EDKII_IOMMU_PROTOCOL_REVISION,
+ IoMmuSetAttribute,
+ IoMmuMap,
+ IoMmuUnmap,
+ IoMmuAllocateBuffer,
+ IoMmuFreeBuffer,
+};
+
+/**
+ Initialize the VTd driver.
+
+ @param[in] ImageHandle ImageHandle of the loaded driver
+ @param[in] SystemTable Pointer to the System Table
+
+ @retval EFI_SUCCESS The Protocol is installed.
+ @retval EFI_OUT_OF_RESOURCES Not enough resources available to initialize driver.
+ @retval EFI_DEVICE_ERROR A device error occurred attempting to initialize the driver.
+
+**/
+EFI_STATUS
+EFIAPI
+IntelVTdInitialize (
+ IN EFI_HANDLE ImageHandle,
+ IN EFI_SYSTEM_TABLE *SystemTable
+ )
+{
+ EFI_STATUS Status;
+ EFI_HANDLE Handle;
+
+ InitializeDmaProtection ();
+
+ Handle = NULL;
+ Status = gBS->InstallMultipleProtocolInterfaces (
+ &Handle,
+ &gEdkiiIoMmuProtocolGuid, &mIntelVTd,
+ NULL
+ );
+ ASSERT_EFI_ERROR (Status);
+
+ return Status;
+}