X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FBus%2FScsi%2FScsiBusDxe%2FScsiBus.h;fp=MdeModulePkg%2FBus%2FScsi%2FScsiBusDxe%2FScsiBus.h;h=a637042af7bb4a095ba68d91fe4a3fa383af8154;hp=babf86f2c3959e41f14567fe17b354253d9c21fc;hb=d1102dba7210b95e41d06c2338a22ba6af248645;hpb=ca79bab7af4770c5eb578f6d495af01705aedb79
diff --git a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
index babf86f2c3..a637042af7 100644
--- a/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
+++ b/MdeModulePkg/Bus/Scsi/ScsiBusDxe/ScsiBus.h
@@ -1,7 +1,7 @@
/** @file
Header file for SCSI Bus Driver.
-Copyright (c) 2006 - 2013, Intel Corporation. All rights reserved.
+Copyright (c) 2006 - 2018, Intel Corporation. All rights reserved.
This program and the accompanying materials
are licensed and made available under the terms and conditions of the BSD License
which accompanies this distribution. The full text of the license may be found at
@@ -41,7 +41,7 @@ WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
typedef union {
UINT32 Scsi;
- UINT8 ExtScsi[4];
+ UINT8 ExtScsi[4];
} SCSI_ID;
typedef struct _SCSI_TARGET_ID {
@@ -79,7 +79,7 @@ typedef struct _EFI_SCSI_BUS_PROTOCOL {
typedef struct _SCSI_BUS_DEVICE {
UINTN Signature;
EFI_SCSI_BUS_PROTOCOL BusIdentify;
- BOOLEAN ExtScsiSupport;
+ BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiInterface;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiInterface;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
@@ -92,7 +92,7 @@ typedef struct {
EFI_HANDLE Handle;
EFI_SCSI_IO_PROTOCOL ScsiIo;
EFI_DEVICE_PATH_PROTOCOL *DevicePath;
- BOOLEAN ExtScsiSupport;
+ BOOLEAN ExtScsiSupport;
EFI_SCSI_PASS_THRU_PROTOCOL *ScsiPassThru;
EFI_EXT_SCSI_PASS_THRU_PROTOCOL *ExtScsiPassThru;
SCSI_BUS_DEVICE *ScsiBusDeviceData;
@@ -174,7 +174,7 @@ SCSIBusDriverBindingStart (
restrictions for this service. DisconnectController() must follow these
calling restrictions. If any other agent wishes to call Stop() it must also
follow these calling restrictions.
-
+
@param This Protocol instance pointer.
@param ControllerHandle Handle of device to stop driver on
@param NumberOfChildren Number of Handles in ChildHandleBuffer. If number of
@@ -327,11 +327,11 @@ ScsiBusComponentNameGetControllerName (
@param This Protocol instance pointer.
@param DeviceType A pointer to the device type information retrieved from
- the SCSI Controller.
+ the SCSI Controller.
@retval EFI_SUCCESS Retrieves the device type information successfully.
@retval EFI_INVALID_PARAMETER The DeviceType is NULL.
-
+
**/
EFI_STATUS
EFIAPI
@@ -370,7 +370,7 @@ ScsiGetDeviceLocation (
@retval EFI_DEVICE_ERROR Errors encountered when resetting the SCSI bus.
@retval EFI_UNSUPPORTED The bus reset operation is not supported by the
SCSI Host Controller.
- @retval EFI_TIMEOUT A timeout occurred while attempting to reset
+ @retval EFI_TIMEOUT A timeout occurred while attempting to reset
the SCSI bus.
**/
EFI_STATUS
@@ -400,47 +400,47 @@ ScsiResetDevice (
Sends a SCSI Request Packet to the SCSI Controller for execution.
@param This Protocol instance pointer.
- @param CommandPacket The SCSI request packet to send to the SCSI
+ @param CommandPacket The SCSI request packet to send to the SCSI
Controller specified by the device handle.
@param Event If the SCSI bus where the SCSI device is attached
- does not support non-blocking I/O, then Event is
- ignored, and blocking I/O is performed.
+ does not support non-blocking I/O, then Event is
+ ignored, and blocking I/O is performed.
If Event is NULL, then blocking I/O is performed.
- If Event is not NULL and non-blocking I/O is
+ If Event is not NULL and non-blocking I/O is
supported, then non-blocking I/O is performed,
and Event will be signaled when the SCSI Request
Packet completes.
- @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
- successfully, and TransferLength bytes were
- transferred to/from DataBuffer.See
- HostAdapterStatus, TargetStatus,
+ @retval EFI_SUCCESS The SCSI Request Packet was sent by the host
+ successfully, and TransferLength bytes were
+ transferred to/from DataBuffer.See
+ HostAdapterStatus, TargetStatus,
SenseDataLength, and SenseData in that order
for additional status information.
- @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
+ @retval EFI_BAD_BUFFER_SIZE The SCSI Request Packet was executed,
but the entire DataBuffer could not be transferred.
The actual number of bytes transferred is returned
- in TransferLength. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ in TransferLength. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
- there are too many SCSI Command Packets already
+ @retval EFI_NOT_READY The SCSI Request Packet could not be sent because
+ there are too many SCSI Command Packets already
queued.The caller may retry again later.
- @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
- the SCSI Request Packet. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ @retval EFI_DEVICE_ERROR A device error occurred while attempting to send
+ the SCSI Request Packet. See HostAdapterStatus,
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
- @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
- The SCSI Request Packet was not sent, so no
+ @retval EFI_INVALID_PARAMETER The contents of CommandPacket are invalid.
+ The SCSI Request Packet was not sent, so no
additional status information is available.
@retval EFI_UNSUPPORTED The command described by the SCSI Request Packet
- is not supported by the SCSI initiator(i.e., SCSI
+ is not supported by the SCSI initiator(i.e., SCSI
Host Controller). The SCSI Request Packet was not
- sent, so no additional status information is
+ sent, so no additional status information is
available.
- @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
+ @retval EFI_TIMEOUT A timeout occurred while waiting for the SCSI
Request Packet to execute. See HostAdapterStatus,
- TargetStatus, SenseDataLength, and SenseData in
+ TargetStatus, SenseDataLength, and SenseData in
that order for additional status information.
**/
EFI_STATUS