X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=31055192973ea8179645fbff4757770d0808ce80;hp=bb58f794f1acb699e27db6472ffe0a0484ecdfb1;hb=28f5d708e7a162e5d34afc620b1ec908a43e33a5;hpb=044824d9601202626e2df5aac439191c49e6701e
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index bb58f794f1..3105519297 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -4,7 +4,7 @@
# It also provides the defintions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2012, Intel Corporation. All rights reserved.
+# Copyright (c) 2007 - 2013, Intel Corporation. All rights reserved.
# This program and the accompanying materials are licensed and made available under
# the terms and conditions of the BSD License that accompanies this distribution.
# The full text of the license may be found at
@@ -119,6 +119,14 @@
# Include/Guid/SystemNvDataGuid.h
gEfiSystemNvDataFvGuid = { 0xFFF12B8D, 0x7696, 0x4C8B, { 0xA9, 0x85, 0x27, 0x47, 0x07, 0x5B, 0x4F, 0x50 }}
+ ## GUID used as the signature of FTW working block header.
+ # Include/Guid/SystemNvDataGuid.h
+ gEdkiiWorkingBlockSignatureGuid = { 0x9e58292b, 0x7c68, 0x497d, { 0xa0, 0xce, 0x65, 0x0, 0xfd, 0x9f, 0x1b, 0x95 }}
+
+ ## GUID used to build FTW last write data hob and install PPI to inform the check for FTW last write data has been done.
+ # Include/Guid/FaultTolerantWrite.h
+ gEdkiiFaultTolerantWriteGuid = { 0x1d3e9cb8, 0x43af, 0x490b, { 0x83, 0xa, 0x35, 0x16, 0xaa, 0x53, 0x20, 0x47 }}
+
## Guid specify the device is the console out device.
# Include/Guid/ConsoleOutDevice.h
gEfiConsoleOutDeviceGuid = { 0xD3B36F2C, 0xD551, 0x11D4, { 0x9A, 0x46, 0x00, 0x90, 0x27, 0x3F, 0xC1, 0x4D }}
@@ -246,10 +254,14 @@
## Guid for Firmware Performance Data Table (FPDT) implementation.
# Include/Guid/FirmwarePerformance.h
gEfiFirmwarePerformanceGuid = { 0xc095791a, 0x3001, 0x47b2, { 0x80, 0xc9, 0xea, 0xc7, 0x31, 0x9f, 0x2f, 0xa4 }}
+ gFirmwarePerformanceS3PointerGuid = { 0xdc65adc, 0xa973, 0x4130, { 0x8d, 0xf0, 0x2a, 0xdb, 0xeb, 0x9e, 0x4a, 0x31 }}
## Include/Guid/ExitBootServiceFailed.h
gEventExitBootServicesFailedGuid = { 0x4f6c5507, 0x232f, 0x4787, { 0xb9, 0x5e, 0x72, 0xf8, 0x62, 0x49, 0xc, 0xb1 } }
+ ## Include/Guid/ConnectConInEvent.h
+ gConnectConInEventGuid = { 0xdb4e8151, 0x57ed, 0x4bed, { 0x88, 0x33, 0x67, 0x51, 0xb5, 0xd1, 0xa8, 0xd7 }}
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -322,6 +334,10 @@
# Include/Protocol/SmmVariableProtocol.h
gEfiSmmVariableProtocolGuid = { 0xed32d533, 0x99e6, 0x4209, { 0x9c, 0xc0, 0x2d, 0x72, 0xcd, 0xd9, 0x98, 0xa7 }}
+ ## This protocol is intended for use as a means to mark a variable read-only after the event EFI_END_OF_DXE_EVENT_GUID is signaled.
+ # Include/Protocol/VariableLock.h
+ gEdkiiVariableLockProtocolGuid = { 0xcd3d0a05, 0x9e24, 0x437c, { 0xa8, 0x91, 0x1e, 0xe0, 0x53, 0xdb, 0x76, 0x38 }}
+
## This protocol is similar with DXE FVB protocol and used in the UEFI SMM evvironment.
# Include/Protocol/SmmFirmwareVolumeBlock.h
gEfiSmmFirmwareVolumeBlockProtocolGuid = { 0xd326d041, 0xbd31, 0x4c01, { 0xb5, 0xa8, 0x62, 0x8b, 0xe8, 0x7f, 0x6, 0x53 }}
@@ -450,6 +466,11 @@
# If FALSE, TEXT statement will be set to GrayOut only when GrayOut condition is TRUE.
gEfiMdeModulePkgTokenSpaceGuid.PcdBrowserGrayOutTextStatement|FALSE|BOOLEAN|0x0001004f
+ ## This PCD specifies whether unselectable menu should be gray out in HII Form Browser.
+ # If TRUE, the unselectable menu will be set to GrayOut.
+ # If FALSE, the menu will be show as normal menu entry even if it is not selectable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBrowerGrayOutReadOnlyMenu|FALSE|BOOLEAN|0x00010070
+
## If TRUE, recovery from IDE disk will be supported.
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryOnIdeDisk|TRUE|BOOLEAN|0x00010060
@@ -527,7 +548,7 @@
## The size of volatile buffer. This buffer is used to store VOLATILE attribute variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
- ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize
+ ## Size of the FTW spare block range. Note that this value should larger than PcdFlashNvStorageVariableSize and block size aligned.
# The root cause is that variable driver will use FTW protocol to reclaim variable region.
# If the length of variable region is larger than FTW spare size, it means the whole variable region can not
# be reflushed through the manner of fault tolerant write.
@@ -542,18 +563,12 @@
## FFS filename to find the capsule coalesce image.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleCoalesceFile|{ 0xA6, 0xE4, 0xFD, 0xF7, 0x4C, 0x29, 0x3c, 0x49, 0xB5, 0x0F, 0x97, 0x34, 0x55, 0x3B, 0xB7, 0x57 }|VOID*|0x30000017
- ## Single root I/O virtualization virtual function memory BAR alignment
- # BITN set indicates 2 of n+12 power
- # BIT0 set indicates 4KB alignment
- # BIT1 set indicates 8KB alignment
- gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
-
## Flag of enabling/disabling the feature of Loading Module at Fixed Address
# -1: Enable the feature as fixed offset to TOLM
# 0: Disable the feature.
# Positive Value: Enable the feature as fixed absolute address, and the value is the top memory address
gEfiMdeModulePkgTokenSpaceGuid.PcdLoadModuleAtFixAddressEnable|0|UINT64|0x30001015
-
+
## Smbios version
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0207|UINT16|0x00010055
@@ -658,7 +673,7 @@
## Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase|0x0|UINT32|0x30000001
- ## Base address of the FTW spare block range in flash device.
+ ## Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase|0x0|UINT32|0x30000013
## Base address of the FTW working block range in flash device.
@@ -667,7 +682,7 @@
## 64-bit Base address of the NV variable range in flash device
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageVariableBase64|0x0|UINT64|0x80000001
- ## 64-bit Base address of the FTW spare block range in flash device.
+ ## 64-bit Base address of the FTW spare block range in flash device. Note that this value should be block size aligned.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwSpareBase64|0x0|UINT64|0x80000013
## 64-bit Base address of the FTW working block range in flash device.
@@ -691,6 +706,12 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdMrIovSupport|FALSE|BOOLEAN|0x10000046
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
+ ## Single root I/O virtualization virtual function memory BAR alignment
+ # BITN set indicates 2 of n+12 power
+ # BIT0 set indicates 4KB alignment
+ # BIT1 set indicates 8KB alignment
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSrIovSystemPageSize|0x1|UINT32|0x10000047
+
## This PCD defines the times to print hello world string.
# This PCD is a sample to explain FixedAtBuild UINT32 PCD usage.
gEfiMdeModulePkgTokenSpaceGuid.PcdHelloWorldPrintTimes|1|UINT32|0x40000005
@@ -849,3 +870,9 @@
# default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateDataPtr|0x0|UINT64|0x00030000
+ ## This dynamic PCD hold an address to point to private data structure SMM copy used in DxeS3BootScriptLib library
+ # instance which records the S3 boot script table start address, length, etc. To introduce this PCD is
+ # only for DxeS3BootScriptLib instance implementation purpose. The platform developer should make sure the
+ # default value is set to Zero. And the PCD is assumed ONLY to be accessed in DxeS3BootScriptLib Library.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
+