X-Git-Url: https://git.proxmox.com/?p=mirror_edk2.git;a=blobdiff_plain;f=MdeModulePkg%2FMdeModulePkg.dec;h=4f44af694862c95e542fea44568ce562e633de93;hp=61d034fba85e3a088fddd61180d2ba31788dfc37;hb=HEAD;hpb=c7be0dd5b9367d6a17460ff0ace376d827f70143
diff --git a/MdeModulePkg/MdeModulePkg.dec b/MdeModulePkg/MdeModulePkg.dec
index 61d034fba8..e8058c8bfa 100644
--- a/MdeModulePkg/MdeModulePkg.dec
+++ b/MdeModulePkg/MdeModulePkg.dec
@@ -3,18 +3,14 @@
# It also provides the definitions(including PPIs/PROTOCOLs/GUIDs and library classes)
# and libraries instances, which are used for those modules.
#
-# Copyright (c) 2007 - 2018, Intel Corporation. All rights reserved.
+# Copyright (c) 2019, NVIDIA CORPORATION. All rights reserved.
+# Copyright (c) 2007 - 2021, Intel Corporation. All rights reserved.
# Copyright (c) 2016, Linaro Ltd. All rights reserved.
-# (C) Copyright 2016 Hewlett Packard Enterprise Development LP
+# (C) Copyright 2016 - 2019 Hewlett Packard Enterprise Development LP
# Copyright (c) 2017, AMD Incorporated. All rights reserved.
-#
-# This program and the accompanying materials are licensed and made available under
-# the terms and conditions of the BSD License that accompanies this distribution.
-# The full text of the license may be found at
-# http://opensource.org/licenses/bsd-license.php.
-#
-# THE PROGRAM IS DISTRIBUTED UNDER THE BSD LICENSE ON AN "AS IS" BASIS,
-# WITHOUT WARRANTIES OR REPRESENTATIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED.
+# Copyright (c) Microsoft Corporation.
+# Copyright (C) 2023 Advanced Micro Devices, Inc. All rights reserved.
+# SPDX-License-Identifier: BSD-2-Clause-Patent
#
##
@@ -29,40 +25,18 @@
[Includes]
Include
+[Includes.Common.Private]
+ Library/BrotliCustomDecompressLib/brotli/c/include
[LibraryClasses]
- ## @libraryclass IpIo layer upon EFI IP4 Protocol.
- # This library is only intended to be used by UEFI network stack modules.
- IpIoLib|Include/Library/IpIoLib.h
-
- ## @libraryclass Basic function for UEFI network stack.
- # This library is only intended to be used by UEFI network stack modules.
- NetLib|Include/Library/NetLib.h
-
- ## @libraryclass The helper routines to access UDP service.
- # This library is only intended to be used by UEFI network stack modules.
- UdpIoLib|Include/Library/UdpIoLib.h
-
- ## @libraryclass The helper routines to access TCP service.
- # This library is only intended to be used by UEFI network stack modules.
- TcpIoLib|Include/Library/TcpIoLib.h
-
- ## @libraryclass The helper routines to access HTTP service.
- # This library is only intended to be used by UEFI network stack modules.
- HttpLib|Include/Library/HttpLib.h
-
## @libraryclass Defines a set of methods to reset whole system.
ResetSystemLib|Include/Library/ResetSystemLib.h
- ## @libraryclass Defines a set of methods related do S3 mode.
- # This library class is no longer used and modules using this library should
- # directly locate EFI_PEI_S3_RESUME_PPI defined in PI 1.2 specification.
- S3Lib|Include/Library/S3Lib.h
+ ## @libraryclass Business logic for storing and testing variable policies
+ VariablePolicyLib|Include/Library/VariablePolicyLib.h
- ## @libraryclass Defines a set of methods related recovery mode.
- # This library class is no longer used and modules using this library should
- # directly locate EFI_PEI_RECOVERY_MODULE_PPI defined in PI 1.2 specification.
- RecoveryLib|Include/Library/RecoveryLib.h
+ ## @libraryclass Defines a set of helper functions for resetting the system.
+ ResetUtilityLib|Include/Library/ResetUtilityLib.h
## @libraryclass Provides HII related functions.
HiiLib|Include/Library/HiiLib.h
@@ -70,9 +44,6 @@
## @libraryclass Defines a set of interfaces on how to process capusle image update.
CapsuleLib|Include/Library/CapsuleLib.h
- ## @libraryclass Library for Deferred Procedure Calls.
- DpcLib|Include/Library/DpcLib.h
-
## @libraryclass Provides global variables that are pointers
# to the UEFI HII related protocols.
#
@@ -147,6 +118,10 @@
#
IpmiLib|Include/Library/IpmiLib.h
+ ## @libraryclass Provides interfaces to send/receive IPMI command.
+ #
+ IpmiCommandLib|Include/Library/IpmiCommandLib.h
+
## @libraryclass Provides interfaces for platform to return root bridge information to PciHostBridgeDxe driver.
#
PciHostBridgeLib|Include/Library/PciHostBridgeLib.h
@@ -167,6 +142,27 @@
##
NonDiscoverableDeviceRegistrationLib|Include/Library/NonDiscoverableDeviceRegistrationLib.h
+ ## @libraryclass Provides services to convert a BMP graphics image to a GOP BLT buffer
+ # and to convert a GOP BLT buffer to a BMP graphics image.
+ #
+ BmpSupportLib|Include/Library/BmpSupportLib.h
+
+ ## @libraryclass Provides services to display completion progress when
+ # processing a firmware update that updates the firmware image in a firmware
+ # device. A platform may provide its own instance of this library class to
+ # customize how a user is informed of completion progress.
+ #
+ DisplayUpdateProgressLib|Include/Library/DisplayUpdateProgressLib.h
+
+ ## @libraryclass This library contains helper functions for marshalling and
+ # registering new policies with the VariablePolicy infrastructure.
+ #
+ VariablePolicyHelperLib|Include/Library/VariablePolicyHelperLib.h
+
+ ## @libraryclass Provides services to access UEFI variable flash information.
+ #
+ VariableFlashInfoLib|Include/Library/VariableFlashInfoLib.h
+
[Guids]
## MdeModule package token space guid
# Include/Guid/MdeModulePkgTokenSpace.h
@@ -239,12 +235,19 @@
# Include/Guid/SmmVariableCommon.h
gSmmVariableWriteGuid = { 0x93ba1826, 0xdffb, 0x45dd, { 0x82, 0xa7, 0xe7, 0xdc, 0xaa, 0x3b, 0xbd, 0xf3 }}
+ ## Guid of the variable flash information HOB.
+ # Include/Guid/VariableFlashInfo.h
+ gVariableFlashInfoHobGuid = { 0x5d11c653, 0x8154, 0x4ac3, { 0xa8, 0xc2, 0xfb, 0xa2, 0x89, 0x20, 0xfc, 0x90 }}
+
## Performance protocol guid that also acts as the performance HOB guid and performance variable GUID
# Include/Guid/Performance.h
gPerformanceProtocolGuid = { 0x76B6BDFA, 0x2ACD, 0x4462, { 0x9E, 0x3F, 0xCB, 0x58, 0xC9, 0x69, 0xD9, 0x37 } }
gSmmPerformanceProtocolGuid = { 0xf866226a, 0xeaa5, 0x4f5a, { 0xa9, 0xa, 0x6c, 0xfb, 0xa5, 0x7c, 0x58, 0x8e } }
gPerformanceExProtocolGuid = { 0x1ea81bec, 0xf01a, 0x4d98, { 0xa2, 0x1, 0x4a, 0x61, 0xce, 0x2f, 0xc0, 0x22 } }
gSmmPerformanceExProtocolGuid = { 0x931fc048, 0xc71d, 0x4455, { 0x89, 0x30, 0x47, 0x6, 0x30, 0xe3, 0xe, 0xe5 } }
+ # Include/Guid/PerformanceMeasurement.h
+ gEdkiiPerformanceMeasurementProtocolGuid = { 0xc85d06be, 0x5f75, 0x48ce, { 0xa8, 0x0f, 0x12, 0x36, 0xba, 0x3b, 0x87, 0xb1 } }
+ gEdkiiSmmPerformanceMeasurementProtocolGuid = { 0xd56b6d73, 0x1a7b, 0x4015, { 0x9b, 0xb4, 0x7b, 0x07, 0x17, 0x29, 0xed, 0x24 } }
## Guid is defined for CRC32 encapsulation scheme.
# Include/Guid/Crc32GuidedSectionExtraction.h
@@ -285,6 +288,9 @@
## Include/Guid/RecoveryDevice.h
gRecoveryOnDataCdGuid = { 0x5CAC0099, 0x0DC9, 0x48E5, { 0x80, 0x68, 0xBB, 0x95, 0xF5, 0x40, 0x0A, 0x9F }}
+ ## Include/Guid/RecoveryDevice.h
+ gRecoveryOnFatNvmeDiskGuid = { 0xC770A27F, 0x956A, 0x497A, { 0x85, 0x48, 0xE0, 0x61, 0x97, 0x58, 0x8B, 0xF6 }}
+
## Include/Guid/SmmLockBox.h
gEfiSmmLockBoxCommunicationGuid = { 0x2a3cfebd, 0x27e8, 0x4d0a, { 0x8b, 0x79, 0xd6, 0x88, 0xc2, 0xa3, 0xe1, 0xc0 }}
@@ -313,16 +319,6 @@
## Include/Guid/PlatDriOverrideHii.h
gPlatformOverridesManagerGuid = { 0x8614567d, 0x35be, 0x4415, { 0x8d, 0x88, 0xbd, 0x7d, 0xc, 0x9c, 0x70, 0xc0 }}
- ## Include/Guid/Ip4Config2Hii.h
- gIp4Config2NvDataGuid = { 0x9b942747, 0x154e, 0x4d29, { 0xa4, 0x36, 0xbf, 0x71, 0x0, 0xc8, 0xb5, 0x3b }}
-
- ## Include/Guid/VlanConfigHii.h
- gVlanConfigFormSetGuid = { 0xd79df6b0, 0xef44, 0x43bd, { 0x97, 0x97, 0x43, 0xe9, 0x3b, 0xcf, 0x5f, 0xa8 }}
-
- ## Include/Guid/Ip4IScsiConfigHii.h
- gIp4IScsiConfigGuid = { 0x6456ed61, 0x3579, 0x41c9, { 0x8a, 0x26, 0x0a, 0x0b, 0xd6, 0x2b, 0x78, 0xfc }}
- gIScsiCHAPAuthInfoGuid = { 0x786ec0ac, 0x65ae, 0x4d1b, { 0xb1, 0x37, 0xd, 0x11, 0xa, 0x48, 0x37, 0x97 }}
-
## Include/Guid/ZeroGuid.h
gZeroGuid = { 0x0, 0x0, 0x0, {0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}
@@ -360,6 +356,10 @@
## Include/Guid/TtyTerm.h
gEfiTtyTermGuid = { 0x7d916d80, 0x5bb1, 0x458c, {0xa4, 0x8f, 0xe2, 0x5f, 0xdd, 0x51, 0xef, 0x94 }}
+ gEdkiiLinuxTermGuid = { 0xe4364a7f, 0xf825, 0x430e, {0x9d, 0x3a, 0x9c, 0x9b, 0xe6, 0x81, 0x7c, 0xa5 }}
+ gEdkiiXtermR6Guid = { 0xfbfca56b, 0xbb36, 0x4b78, {0xaa, 0xab, 0xbe, 0x1b, 0x97, 0xec, 0x7c, 0xcb }}
+ gEdkiiVT400Guid = { 0x8e46dddd, 0x3d49, 0x4a9d, {0xb8, 0x75, 0x3c, 0x08, 0x6f, 0x6a, 0xa2, 0xbd }}
+ gEdkiiSCOTermGuid = { 0xfc7dd6e0, 0x813c, 0x434d, {0xb4, 0xda, 0x3b, 0xd6, 0x49, 0xe9, 0xe1, 0x5a }}
## Include/Guid/HiiBootMaintenanceFormset.h
gEfiIfrBootMaintenanceGuid = { 0xb2dedc91, 0xd59f, 0x48d2, { 0x89, 0x8a, 0x12, 0x49, 0xc, 0x74, 0xa4, 0xe0 }}
@@ -392,9 +392,55 @@
## Include/Guid/PlatformHasAcpi.h
gEdkiiPlatformHasAcpiGuid = { 0xf0966b41, 0xc23f, 0x41b9, { 0x96, 0x04, 0x0f, 0xf7, 0xe1, 0x11, 0x96, 0x5a } }
+ ## Include/Guid/ExtendedFirmwarePerformance.h
+ gEdkiiFpdtExtendedFirmwarePerformanceGuid = { 0x3b387bfd, 0x7abc, 0x4cf2, { 0xa0, 0xca, 0xb6, 0xa1, 0x6c, 0x1b, 0x1b, 0x25 } }
+
## Include/Guid/EndofS3Resume.h
gEdkiiEndOfS3ResumeGuid = { 0x96f5296d, 0x05f7, 0x4f3c, {0x84, 0x67, 0xe4, 0x56, 0x89, 0x0e, 0x0c, 0xb5 } }
+ ## Used (similar to Variable Services) to communicate policies to the enforcement engine.
+ # {DA1B0D11-D1A7-46C4-9DC9-F3714875C6EB}
+ gVarCheckPolicyLibMmiHandlerGuid = { 0xda1b0d11, 0xd1a7, 0x46c4, { 0x9d, 0xc9, 0xf3, 0x71, 0x48, 0x75, 0xc6, 0xeb }}
+
+ ## Include/Guid/S3SmmInitDone.h
+ gEdkiiS3SmmInitDoneGuid = { 0x8f9d4825, 0x797d, 0x48fc, { 0x84, 0x71, 0x84, 0x50, 0x25, 0x79, 0x2e, 0xf6 } }
+
+ ## Include/Guid/S3StorageDeviceInitList.h
+ gS3StorageDeviceInitListGuid = { 0x310e9b8c, 0xcf90, 0x421e, { 0x8e, 0x9b, 0x9e, 0xef, 0xb6, 0x17, 0xc8, 0xef } }
+
+ ## Include/Guid/SerialPortLibVendor.h
+ gEdkiiSerialPortLibVendorGuid = { 0xD3987D4B, 0x971A, 0x435F, { 0x8C, 0xAF, 0x49, 0x67, 0xEB, 0x62, 0x72, 0x41 } }
+
+ ## GUID indicates the capsule is to store Capsule On Disk file names.
+ gEdkiiCapsuleOnDiskNameGuid = { 0x98c80a4f, 0xe16b, 0x4d11, { 0x93, 0x9a, 0xab, 0xe5, 0x61, 0x26, 0x3, 0x30 } }
+
+ ## Include/Guid/MigratedFvInfo.h
+ gEdkiiMigratedFvInfoGuid = { 0xc1ab12f7, 0x74aa, 0x408d, { 0xa2, 0xf4, 0xc6, 0xce, 0xfd, 0x17, 0x98, 0x71 } }
+
+ #
+ # GUID defined in UniversalPayload
+ #
+ ## Include/UniversalPayload/PciRootBridges.h
+ gUniversalPayloadPciRootBridgeInfoGuid = { 0xec4ebacb, 0x2638, 0x416e, { 0xbe, 0x80, 0xe5, 0xfa, 0x4b, 0x51, 0x19, 0x01 }}
+
+ ## Include/UniversalPayload/SmbiosTable.h
+ gUniversalPayloadSmbios3TableGuid = { 0x92b7896c, 0x3362, 0x46ce, { 0x99, 0xb3, 0x4f, 0x5e, 0x3c, 0x34, 0xeb, 0x42 } }
+
+ ## Include/UniversalPayload/SmbiosTable.h
+ gUniversalPayloadSmbiosTableGuid = { 0x590a0d26, 0x06e5, 0x4d20, { 0x8a, 0x82, 0x59, 0xea, 0x1b, 0x34, 0x98, 0x2d } }
+
+ ## Include/UniversalPayload/AcpiTable.h
+ gUniversalPayloadAcpiTableGuid = { 0x9f9a9506, 0x5597, 0x4515, { 0xba, 0xb6, 0x8b, 0xcd, 0xe7, 0x84, 0xba, 0x87 } }
+
+ ## Include/UniversalPayload/ExtraData.h
+ gUniversalPayloadExtraDataGuid = {0x15a5baf6, 0x1c91, 0x467d, {0x9d, 0xfb, 0x31, 0x9d, 0x17, 0x8d, 0x4b, 0xb4}}
+
+ ## Include/UniversalPayload/SerialPortInfo.h
+ gUniversalPayloadSerialPortInfoGuid = { 0xaa7e190d, 0xbe21, 0x4409, { 0x8e, 0x67, 0xa2, 0xcd, 0xf, 0x61, 0xe1, 0x70 } }
+
+ ## GUID used for Boot Discovery Policy FormSet guid and related variables.
+ gBootDiscoveryPolicyMgrFormsetGuid = { 0x5b6f7107, 0xbb3c, 0x4660, { 0x92, 0xcd, 0x54, 0x26, 0x90, 0x28, 0x0b, 0xbd } }
+
[Ppis]
## Include/Ppi/AtaController.h
gPeiAtaControllerPpiGuid = { 0xa45e60d1, 0xc719, 0x44aa, { 0xb0, 0x7a, 0xaa, 0x77, 0x7f, 0x85, 0x90, 0x6d }}
@@ -441,6 +487,40 @@
## Include/Ppi/IoMmu.h
gEdkiiIoMmuPpiGuid = { 0x70b0af26, 0xf847, 0x4bb6, { 0xaa, 0xb9, 0xcd, 0xe8, 0x4f, 0xc6, 0x14, 0x31 } }
+ ## Include/Ppi/PlatformSpecificResetFilter.h
+ gEdkiiPlatformSpecificResetFilterPpiGuid = { 0x8c9f4de3, 0x7b90, 0x47ef, { 0x93, 0x8, 0x28, 0x7c, 0xec, 0xd6, 0x6d, 0xe8 } }
+
+ ## Include/Ppi/PlatformSpecificResetNotification.h
+ gEdkiiPlatformSpecificResetNotificationPpiGuid = { 0xe09f355d, 0xdae8, 0x4910, { 0xb1, 0x4a, 0x92, 0x78, 0xf, 0xdc, 0xf7, 0xcb } }
+
+ ## Include/Ppi/PlatformSpecificResetHandler.h
+ gEdkiiPlatformSpecificResetHandlerPpiGuid = { 0x75cf14ae, 0x3441, 0x49dc, { 0xaa, 0x10, 0xbb, 0x35, 0xa7, 0xba, 0x8b, 0xab } }
+
+ ## Include/Ppi/NvmExpressHostController.h
+ gEdkiiPeiNvmExpressHostControllerPpiGuid = { 0xcae3aa63, 0x676f, 0x4da3, { 0xbd, 0x50, 0x6c, 0xc5, 0xed, 0xde, 0x9a, 0xad } }
+
+ ## Include/Ppi/AtaAhciController.h
+ gEdkiiPeiAtaAhciHostControllerPpiGuid = { 0x61dd33ea, 0x421f, 0x4cc0, { 0x89, 0x29, 0xff, 0xee, 0xa9, 0xa1, 0xa2, 0x61 } }
+
+ ## Include/Ppi/StorageSecurityCommand.h
+ gEdkiiPeiStorageSecurityCommandPpiGuid = { 0x35de0b4e, 0x30fb, 0x46c3, { 0xbd, 0x84, 0x1f, 0xdb, 0xa1, 0x58, 0xbb, 0x56 } }
+
+ ## Include/Ppi/AtaPassThru.h
+ gEdkiiPeiAtaPassThruPpiGuid = { 0xa16473fd, 0xd474, 0x4c89, { 0xae, 0xc7, 0x90, 0xb8, 0x3c, 0x73, 0x86, 0x9 } }
+
+ ## Include/Ppi/Debug.h
+ gEdkiiDebugPpiGuid = { 0x999e699c, 0xb013, 0x475e, { 0xb1, 0x7b, 0xf3, 0xa8, 0xae, 0x5c, 0x48, 0x75 } }
+
+ ## Include/Ppi/NvmExpressPassThru.h
+ gEdkiiPeiNvmExpressPassThruPpiGuid = { 0x6af31b2c, 0x3be, 0x46c1, { 0xb1, 0x2d, 0xea, 0x4a, 0x36, 0xdf, 0xa7, 0x4c } }
+
+ ## Include/Ppi/PciDevice.h
+ gEdkiiPeiPciDevicePpiGuid = { 0x1597ab4f, 0xd542, 0x4efe, { 0x9a, 0xf7, 0xb2, 0x44, 0xec, 0x54, 0x4c, 0x0b } }
+
+ ## Include/Ppi/CapsuleOnDisk.h
+ gEdkiiPeiCapsuleOnDiskPpiGuid = { 0x71a9ea61, 0x5a35, 0x4a5d, { 0xac, 0xef, 0x9c, 0xf8, 0x6d, 0x6d, 0x67, 0xe0 } }
+ gEdkiiPeiBootInCapsuleOnDiskModePpiGuid = { 0xb08a11e4, 0xe2b7, 0x4b75, { 0xb5, 0x15, 0xaf, 0x61, 0x6, 0x68, 0xbf, 0xd1 } }
+
[Protocols]
## Load File protocol provides capability to load and unload EFI image into memory and execute it.
# Include/Protocol/LoadPe32Image.h
@@ -461,9 +541,6 @@
# Include/Protocol/DebuggerConfiguration.h
gEfiDebuggerConfigurationProtocolGuid = { 0x577d959c, 0xe967, 0x4546, { 0x86, 0x20, 0xc7, 0x78, 0xfa, 0xe5, 0xda, 0x05 }}
- ## Include/Protocol/Dpc.h
- gEfiDpcProtocolGuid = {0x480f8ae9, 0xc46, 0x4aa9, { 0xbc, 0x89, 0xdb, 0x9f, 0xba, 0x61, 0x98, 0x6 }}
-
## Fault Tolerant Write protocol provides boot-time service to do fault tolerant write capability for block devices.
# Include/Protocol/FaultTolerantWrite.h
gEfiFaultTolerantWriteProtocolGuid = { 0x3EBD9E82, 0x2C78, 0x4DE6, { 0x97, 0x86, 0x8D, 0x4B, 0xFC, 0xB7, 0xC8, 0x81 }}
@@ -506,7 +583,6 @@
gEfiLockBoxProtocolGuid = { 0xbd445d79, 0xb7ad, 0x4f04, { 0x9a, 0xd8, 0x29, 0xbd, 0x20, 0x40, 0xeb, 0x3c }}
## Include/Protocol/FormBrowserEx.h
- gEfiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
gEdkiiFormBrowserExProtocolGuid = { 0x1f73b18d, 0x4630, 0x43c1, { 0xa1, 0xde, 0x6f, 0x80, 0x85, 0x5d, 0x7d, 0xa4 } }
## Include/Protocol/EbcVmTest.h
@@ -518,6 +594,9 @@
## Include/Protocol/BootLogo.h
gEfiBootLogoProtocolGuid = { 0xcdea2bd3, 0xfc25, 0x4c1c, { 0xb9, 0x7c, 0xb3, 0x11, 0x86, 0x6, 0x49, 0x90 } }
+ # Include/Protocol/BootLogo2.h
+ gEdkiiBootLogo2ProtocolGuid = { 0x4b5dc1df, 0x1eaa, 0x48b2, { 0xa7, 0xe9, 0xea, 0xc4, 0x89, 0xa0, 0xb, 0x5c } }
+
## Include/Protocol/DisplayProtocol.h
gEdkiiFormDisplayEngineProtocolGuid = { 0x9bbe29e9, 0xfda1, 0x41ec, { 0xad, 0x52, 0x45, 0x22, 0x13, 0x74, 0x2d, 0x2e } }
@@ -527,6 +606,9 @@
## Include/Protocol/UfsHostController.h
gEdkiiUfsHostControllerProtocolGuid = { 0xebc01af5, 0x7a9, 0x489e, { 0xb7, 0xce, 0xdc, 0x8, 0x9e, 0x45, 0x9b, 0x2f } }
+ ## Include/Protocol/UfsHostControllerPlatform.h
+ gEdkiiUfsHcPlatformProtocolGuid = { 0x3d18ba13, 0xd9b1, 0x4dd4, {0xb9, 0x16, 0xd3, 0x07, 0x96, 0x53, 0x9e, 0xd8}}
+
## Include/Protocol/EsrtManagement.h
gEsrtManagementProtocolGuid = { 0xa340c064, 0x723c, 0x4a9c, { 0xa4, 0xdd, 0xd5, 0xb4, 0x7a, 0x26, 0xfb, 0xb0 }}
@@ -559,12 +641,34 @@
## Include/Protocol/IoMmu.h
gEdkiiIoMmuProtocolGuid = { 0x4e939de9, 0xd948, 0x4b0f, { 0x88, 0xed, 0xe6, 0xe1, 0xce, 0x51, 0x7c, 0x1e } }
+ ## Include/Protocol/DeviceSecurity.h
+ gEdkiiDeviceSecurityProtocolGuid = { 0x5d6b38c8, 0x5510, 0x4458, { 0xb4, 0x8d, 0x95, 0x81, 0xcf, 0xa7, 0xb0, 0xd } }
+ gEdkiiDeviceIdentifierTypePciGuid = { 0x2509b2f1, 0xa022, 0x4cca, { 0xaf, 0x70, 0xf9, 0xd3, 0x21, 0xfb, 0x66, 0x49 } }
+ gEdkiiDeviceIdentifierTypeUsbGuid = { 0x7394f350, 0x394d, 0x488c, { 0xbb, 0x75, 0xc, 0xab, 0x7b, 0x12, 0xa, 0xc5 } }
+
## Include/Protocol/SmmMemoryAttribute.h
gEdkiiSmmMemoryAttributeProtocolGuid = { 0x69b792ea, 0x39ce, 0x402d, { 0xa2, 0xa6, 0xf7, 0x21, 0xde, 0x35, 0x1d, 0xfe } }
## Include/Protocol/SdMmcOverride.h
gEdkiiSdMmcOverrideProtocolGuid = { 0xeaf9e3c1, 0xc9cd, 0x46db, { 0xa5, 0xe5, 0x5a, 0x12, 0x4c, 0x83, 0x23, 0x23 } }
+ ## Include/Protocol/PlatformSpecificResetFilter.h
+ gEdkiiPlatformSpecificResetFilterProtocolGuid = { 0x695d7835, 0x8d47, 0x4c11, { 0xab, 0x22, 0xfa, 0x8a, 0xcc, 0xe7, 0xae, 0x7a } }
+ ## Include/Protocol/PlatformSpecificResetHandler.h
+ gEdkiiPlatformSpecificResetHandlerProtocolGuid = { 0x2df6ba0b, 0x7092, 0x440d, { 0xbd, 0x4, 0xfb, 0x9, 0x1e, 0xc3, 0xf3, 0xc1 } }
+
+ ## Include/Protocol/FirmwareManagementProgress.h
+ gEdkiiFirmwareManagementProgressProtocolGuid = { 0x1849bda2, 0x6952, 0x4e86, { 0xa1, 0xdb, 0x55, 0x9a, 0x3c, 0x47, 0x9d, 0xf1 } }
+
+ ## Include/Protocol/AtaAtapiPolicy.h
+ gEdkiiAtaAtapiPolicyProtocolGuid = { 0xe59cd769, 0x5083, 0x4f26,{ 0x90, 0x94, 0x6c, 0x91, 0x9f, 0x91, 0x6c, 0x4e } }
+
+ ## Include/Protocol/PeCoffImageEmulator.h
+ gEdkiiPeCoffImageEmulatorProtocolGuid = { 0x96f46153, 0x97a7, 0x4793, { 0xac, 0xc1, 0xfa, 0x19, 0xbf, 0x78, 0xea, 0x97 } }
+
+ ## Include/Protocol/PlatformBootManager.h
+ gEdkiiPlatformBootManagerProtocolGuid = { 0xaa17add4, 0x756c, 0x460d, { 0x94, 0xb8, 0x43, 0x88, 0xd7, 0xfb, 0x3e, 0x59 } }
+
#
# [Error.gEfiMdeModulePkgTokenSpaceGuid]
# 0x80000001 | Invalid value provided.
@@ -575,6 +679,9 @@
# 0x80000006 | Incorrect error code provided.
#
+ ## Include/Protocol/VariablePolicy.h
+ gEdkiiVariablePolicyProtocolGuid = { 0x81D1675C, 0x86F6, 0x48DF, { 0xBD, 0x95, 0x9A, 0x6E, 0x4F, 0x09, 0x25, 0xC3 } }
+
[PcdsFeatureFlag]
## Indicates if the platform can support update capsule across a system reset.
# TRUE - Supports update capsule across a system reset.
@@ -602,6 +709,18 @@
# @Prompt Enable Device Path From Text support.
gEfiMdeModulePkgTokenSpaceGuid.PcdDevicePathSupportDevicePathFromText|TRUE|BOOLEAN|0x00010038
+ ## Indicates if the UEFI variable runtime cache should be enabled.
+ # This setting only applies if SMM variables are enabled. When enabled, all variable
+ # data for Runtime Service GetVariable () and GetNextVariableName () calls is retrieved
+ # from a runtime data buffer referred to as the "runtime cache". An SMI is not triggered
+ # at all for these requests. Variables writes still trigger an SMI. This can greatly
+ # reduce overall system SMM usage as most boots tend to issue far more variable reads
+ # than writes.
+ # TRUE - The UEFI variable runtime cache is enabled.
+ # FALSE - The UEFI variable runtime cache is disabled.
+ # @Prompt Enable the UEFI variable runtime cache.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEnableVariableRuntimeCache|TRUE|BOOLEAN|0x00010039
+
## Indicates if the statistics about variable usage will be collected. This information is
# stored as a vendor configuration table into the EFI system table.
# Set this PCD to TRUE to use VariableInfo application in MdeModulePkg\Application directory to get
@@ -668,14 +787,6 @@
# @Prompt Disable default keyboard layout in USB KeyBoard Driver.
gEfiMdeModulePkgTokenSpaceGuid.PcdDisableDefaultKeyboardLayoutInUsbKbDriver|FALSE|BOOLEAN|0x00010200
- ## Indicates if backward compatibility to Framework HII and Framework FvHob is supported.
- # TRUE - Setup Browser supports GUID opcodes generated from Framework HII VFR file by VFR compiler.
- # the PeiCore will handle the framework FvHob and install FvInfo PPI for it.
- # FALSE - Setup Browser doesn't support GUID opcodes generated from Framework HII VFR file by VFR compiler.
- # the PeiCore will not handle the framework FvHob and install FvInfo PPI for it.
- # @Prompt Enable framework backward compatibility support.
- gEfiMdeModulePkgTokenSpaceGuid.PcdFrameworkCompatibilitySupport|FALSE|BOOLEAN|0x00012009
-
## Indicates if HelloWorld Application will print the verbose information.
# This PCD is a sample to explain FeatureFlag PCD usage.
# TRUE - HelloWorld Application will print the verbose information.
@@ -707,19 +818,6 @@
# @Prompt Enable PCI bridge IO alignment probe.
gEfiMdeModulePkgTokenSpaceGuid.PcdPciBridgeIoAlignmentProbe|FALSE|BOOLEAN|0x0001004e
- ## Indicates if StatusCode is reported via Serial port.
- # TRUE - Reports StatusCode via Serial port.
- # FALSE - Does not report StatusCode via Serial port.
- # @Prompt Enable StatusCode via Serial port.
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
-
- ## Indicates if StatusCode is stored in memory.
- # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
- # TRUE - Stores StatusCode in memory.
- # FALSE - Does not store StatusCode in memory.
- # @Prompt Enable StatusCode via memory.
- gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
-
## Indicates if PEI phase StatusCode will be replayed in DXE phase.
# TRUE - Replays PEI phase StatusCode in DXE phased.
# FALSE - Does not replay PEI phase StatusCode in DXE phase.
@@ -818,15 +916,19 @@
# @Prompt Degrade 64-bit PCI MMIO BARs for legacy BIOS option ROMs
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|TRUE|BOOLEAN|0x0001003a
-[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64]
+ ## Indicates if the platform can support process non-reset capsule image at runtime.
+ # TRUE - Supports process non-reset capsule image at runtime.
+ # FALSE - Does not support process non-reset capsule image at runtime.
+ # @Prompt Enable process non-reset capsule image at runtime.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSupportProcessCapsuleAtRuntime|FALSE|BOOLEAN|0x00010079
+
+[PcdsFeatureFlag.IA32, PcdsFeatureFlag.ARM, PcdsFeatureFlag.AARCH64, PcdsFeatureFlag.LOONGARCH64]
gEfiMdeModulePkgTokenSpaceGuid.PcdPciDegradeResourceForOptionRom|FALSE|BOOLEAN|0x0001003a
[PcdsFeatureFlag.IA32, PcdsFeatureFlag.X64]
## Indicates if DxeIpl should switch to long mode to enter DXE phase.
- # It is assumed that 64-bit DxeCore is built in firmware if it is true; otherwise 32-bit DxeCore
- # is built in firmware.
# TRUE - DxeIpl will load a 64-bit DxeCore and switch to long mode to hand over to DxeCore.
- # FALSE - DxeIpl will load a 32-bit DxeCore and perform stack switch to hand over to DxeCore.
+ # FALSE - DxeIpl will load a 32-bit or 64-bit DxeCore and perform stack switch to hand over to DxeCore.
# @Prompt DxeIpl switch to long mode.
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeIplSwitchToLongMode|TRUE|BOOLEAN|0x0001003b
@@ -880,7 +982,8 @@
# If enabled, accessing NULL address in UEFI or SMM code can be caught.
# BIT0 - Enable NULL pointer detection for UEFI.
# BIT1 - Enable NULL pointer detection for SMM.
- # BIT2..6 - Reserved for future uses.
+ # BIT2..5 - Reserved for future uses.
+ # BIT6 - Enable non-stop mode.
# BIT7 - Disable NULL pointer detection just after EndOfDxe.
# This is a workaround for those unsolvable NULL access issues in
# OptionROM, boot loader, etc. It can also help to avoid unnecessary
@@ -902,6 +1005,8 @@
# free pages for all of them. The page allocation for the type related to
# cleared bits keeps the same as ususal.
#
+ # This PCD is only valid if BIT0 and/or BIT2 are set in PcdHeapGuardPropertyMask.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0000000000000001
# EfiLoaderCode 0x0000000000000002
@@ -931,6 +1036,8 @@
# if there's enough free memory for all of them. The pool allocation for the
# type related to cleared bits keeps the same as ususal.
#
+ # This PCD is only valid if BIT1 and/or BIT3 are set in PcdHeapGuardPropertyMask.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0000000000000001
# EfiLoaderCode 0x0000000000000002
@@ -954,14 +1061,23 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdHeapGuardPoolType|0x0|UINT64|0x30001053
## This mask is to control Heap Guard behavior.
- # Note that due to the limit of pool memory implementation and the alignment
- # requirement of UEFI spec, BIT7 is a try-best setting which cannot guarantee
- # that the returned pool is exactly adjacent to head guard page or tail guard
- # page.
+ #
+ # Note:
+ # a) Heap Guard is for debug purpose and should not be enabled in product
+ # BIOS.
+ # b) Due to the limit of pool memory implementation and the alignment
+ # requirement of UEFI spec, BIT7 is a try-best setting which cannot
+ # guarantee that the returned pool is exactly adjacent to head guard
+ # page or tail guard page.
+ # c) UEFI freed-memory guard and UEFI pool/page guard cannot be enabled
+ # at the same time.
+ #
# BIT0 - Enable UEFI page guard.
# BIT1 - Enable UEFI pool guard.
# BIT2 - Enable SMM page guard.
# BIT3 - Enable SMM pool guard.
+ # BIT4 - Enable UEFI freed-memory guard (Use-After-Free memory detection).
+ # BIT6 - Enable non-stop mode.
# BIT7 - The direction of Guard Page for Pool Guard.
# 0 - The returned pool is near the tail guard page.
# 1 - The returned pool is near the head guard page.
@@ -987,23 +1103,10 @@
# @Prompt VPD base address.
gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress|0x0|UINT32|0x00010010
- ## Maximum number of FV is supported by PeiCore's dispatching.
- # @Prompt Maximum number of FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxFvSupported|6|UINT32|0x00010030
-
- ## Maximum File count in every FV is supported by PeiCore's dispatching.
- # PeiCore supported File type includes PEIM, Combined PEIM and FV.
- # @Prompt Maximum File count per FV supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeimPerFv|32|UINT32|0x00010031
-
## Maximum stack size for PeiCore.
# @Prompt Maximum stack size for PeiCore.
gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPeiStackSize|0x20000|UINT32|0x00010032
- ## Maximum PPI count is supported by PeiCore's PPI database.
- # @Prompt Maximum PPI count supported by PeiCore.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPeiCoreMaxPpiSupported|64|UINT32|0x00010033
-
## The maximum size of a single non-HwErr type variable.
# @Prompt Maximum variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVariableSize|0x400|UINT32|0x30000003
@@ -1013,6 +1116,14 @@
# @Prompt Maximum authenticated variable size.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxAuthVariableSize|0x00|UINT32|0x30000009
+ ## The maximum size of a single non-authenticated volatile variable.
+ # The default value is 0 for compatibility: in that case, the maximum
+ # non-authenticated volatile variable size remains specified by
+ # PcdMaxVariableSize. Only the MdeModulePkg/Universal/Variable/RuntimeDxe
+ # driver supports this PCD.
+ # @Prompt Maximum non-authenticated volatile variable size.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaxVolatileVariableSize|0x00|UINT32|0x3000000a
+
## The maximum size of single hardware error record variable.
# In IA32/X64 platforms, this value should be larger than 1KB.
# In IA64 platforms, this value should be larger than 128KB.
@@ -1061,6 +1172,15 @@
# @Prompt Variable storage size.
gEfiMdeModulePkgTokenSpaceGuid.PcdVariableStoreSize|0x10000|UINT32|0x30000005
+ ## Toggle for whether the VariablePolicy engine should allow disabling.
+ # The engine is enabled at power-on, but the interface allows the platform to
+ # disable enforcement for servicing flexibility. If this PCD is disabled, it will block the ability to
+ # disable the enforcement and VariablePolicy enforcement will always be ON.
+ # TRUE - VariablePolicy can be disabled by request through the interface (until interface is locked)
+ # FALSE - VariablePolicy interface will not accept requests to disable and is ALWAYS ON
+ # @Prompt Allow VariablePolicy enforcement to be disabled.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAllowVariablePolicyEnforcementDisable|FALSE|BOOLEAN|0x30000020
+
## FFS filename to find the ACPI tables.
# @Prompt FFS name of ACPI tables storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiTableStorageFile|{ 0x25, 0x4e, 0x37, 0x7e, 0x01, 0x8e, 0xee, 0x4f, 0x87, 0xf2, 0x39, 0xc, 0x23, 0xc6, 0x6, 0xcd }|VOID*|0x30000016
@@ -1082,16 +1202,19 @@
# @Prompt Maximum number of PEI performance log entries.
gEfiMdeModulePkgTokenSpaceGuid.PcdMaxPeiPerformanceLogEntries16|0|UINT16|0x00010035
- ## RTC Update Timeout Value(microsecond).
- # @Prompt RTC Update Timeout Value.
- gEfiMdeModulePkgTokenSpaceGuid.PcdRealTimeClockUpdateTimeout|100000|UINT32|0x00010034
-
## Indicates the 16550 serial port registers are in MMIO space, or in I/O space. Default is I/O space.
# TRUE - 16550 serial port registers are in MMIO space.
# FALSE - 16550 serial port registers are in I/O space.
# @Prompt Serial port registers use MMIO.
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialUseMmio|FALSE|BOOLEAN|0x00020000
+ ## Indicates the access width for 16550 serial port registers.
+ # Default is 8-bit access mode.
+ # 8 - 16550 serial port registers are accessed in 8-bit width.
+ # 32 - 16550 serial port registers are accessed in 32-bit width.
+ # @Prompt Serial port register access width.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSerialRegisterAccessWidth|8|UINT8|0x00020007
+
## Indicates if the 16550 serial port hardware flow control will be enabled. Default is FALSE.
# TRUE - 16550 serial port hardware flow control will be enabled.
# FALSE - 16550 serial port hardware flow control will be disabled.
@@ -1138,12 +1261,6 @@
# @Expression 0x80000002 | (gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl & 0xD8) == 0
gEfiMdeModulePkgTokenSpaceGuid.PcdSerialFifoControl|0x07|UINT8|0x00020005
- ## This setting can override the default TFTP block size. A value of 0 computes
- # the default from MTU information. A non-zero value will be used as block size
- # in bytes.
- # @Prompt TFTP block size.
- gEfiMdeModulePkgTokenSpaceGuid.PcdTftpBlockSize|0x0|UINT64|0x30001026
-
## Maximum address that the DXE Core will allocate the EFI_SYSTEM_TABLE_POINTER
# structure. The default value for this PCD is 0, which means that the DXE Core
# will allocate the buffer from the EFI_SYSTEM_TABLE_POINTER structure on a 4MB
@@ -1168,6 +1285,15 @@
# @Prompt Shadow Peim and PeiCore on boot
gEfiMdeModulePkgTokenSpaceGuid.PcdShadowPeimOnBoot|TRUE|BOOLEAN|0x30001029
+ ## Enable the feature that evacuate temporary memory to permanent memory or not
+ # Set FALSE as default, if the developer need this feature to avoid this vulnerability, please
+ # enable it to shadow all PEIMs no matter the behavior controled by PcdShadowPeimOnBoot or
+ # PcdShadowPeimOnS3Boot
+ # TRUE - Evacuate temporary memory, the actions include copy memory, convert PPI pointers and so on.
+ # FALSE - Do nothing, for example, no copy memory, no convert PPI pointers and so on.
+ # @Prompt Evacuate temporary memory to permanent memory
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMigrateTemporaryRamFirmwareVolumes|FALSE|BOOLEAN|0x3000102A
+
## The mask is used to control memory profile behavior.
# BIT0 - Enable UEFI memory profile.
# BIT1 - Enable SMRAM profile.
@@ -1226,17 +1352,23 @@
## Set image protection policy. The policy is bitwise.
# If a bit is set, the image will be protected by DxeCore if it is aligned.
# The code section becomes read-only, and the data section becomes non-executable.
- # If a bit is clear, the image will not be protected.
+ # If a bit is clear, nothing will be done to image code/data sections.
# BIT0 - Image from unknown device.
# BIT1 - Image from firmware volume.
+ #
+ # Note: If a bit is cleared, the data section could be still non-executable if
+ # PcdDxeNxMemoryProtectionPolicy is enabled for EfiLoaderData, EfiBootServicesData
+ # and/or EfiRuntimeServicesData.
+ #
# @Prompt Set image protection policy.
# @ValidRange 0x80000002 | 0x00000000 - 0x0000001F
gEfiMdeModulePkgTokenSpaceGuid.PcdImageProtectionPolicy|0x00000002|UINT32|0x00001047
## Set DXE memory protection policy. The policy is bitwise.
# If a bit is set, memory regions of the associated type will be mapped
- # non-executable.
- #
+ # non-executable.
+ # If a bit is cleared, nothing will be done to associated type of memory.
+ #
# Below is bit mask for this PCD: (Order is same as UEFI spec)
# EfiReservedMemoryType 0x0001
# EfiLoaderCode 0x0002
@@ -1266,7 +1398,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdDxeNxMemoryProtectionPolicy|0x0000000|UINT64|0x00001048
## PCI Serial Device Info. It is an array of Device, Function, and Power Management
- # information that describes the path that contains zero or more PCI to PCI briges
+ # information that describes the path that contains zero or more PCI to PCI bridges
# followed by a PCI serial device. Each array entry is 4-bytes in length. The
# first byte is the PCI Device Number, then second byte is the PCI Function Number,
# and the last two bytes are the offset to the PCI power management capabilities
@@ -1319,7 +1451,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdBootManagerMenuFile|{ 0xdc, 0x5b, 0xc2, 0xee, 0xf2, 0x67, 0x95, 0x4d, 0xb1, 0xd5, 0xf8, 0x1b, 0x20, 0x39, 0xd1, 0x1d }|VOID*|0x0001006b
## This PCD points to the formset GUID of the driver health management form
- # The form will be popped up by BDS core when there are Configuration Required driver health intances.
+ # The form will be popped up by BDS core when there are Configuration Required driver health instances.
# Platform can customize the PCD to point to different formset.
# @Prompt Driver Health Management Form
gEfiMdeModulePkgTokenSpaceGuid.PcdDriverHealthConfigureForm|{ 0xf4, 0xd9, 0x96, 0x42, 0xfc, 0xf6, 0xde, 0x4d, 0x86, 0x85, 0x8c, 0xe2, 0xd7, 0x9d, 0x90, 0xf0 }|VOID*|0x0001006c
@@ -1409,6 +1541,46 @@
# @Prompt CapsuleMax value in capsule report variable.
gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleMax|0xFFFF|UINT16|0x00000107
+ ## Control which FPDT record format will be used to store the performance entry.
+ # On TRUE, the string FPDT record will be used to store every performance entry.
+ # On FALSE, the different FPDT record will be used to store the different performance entries.
+ # @Prompt String FPDT Record Enable Only
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEdkiiFpdtStringRecordEnableOnly|FALSE|BOOLEAN|0x00000109
+
+ ## Indicates the allowable maximum number of Reset Filters, Reset Notifications or Reset Handlers in PEI phase.
+ # @Prompt Maximum Number of PEI Reset Filters, Reset Notifications or Reset Handlers.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdMaximumPeiResetNotifies|0x10|UINT32|0x0000010A
+
+ ## Capsule On Disk is to deliver capsules via files on Mass Storage device.
+ # This PCD indicates if the Capsule On Disk is supported.
+ # TRUE - Capsule On Disk is supported.
+ # FALSE - Capsule On Disk is not supported.
+ # If platform does not use this feature, this PCD should be set to FALSE.
+ # Two sulotions to deliver Capsule On Disk:
+ # a) If PcdCapsuleInRamSupport = TRUE, Load Capsule On Disk image out of TCB, and reuse
+ # Capsule In Ram to deliver capsule.
+ # b) If PcdCapsuleInRamSupport = FALSE, Relocate Capsule On Disk image to RootDir out
+ # of TCB, and reuse FatPei to load capsules from external storage.
+ # Note:
+ # If Both Capsule In Ram and Capsule On Disk are provisioned at the same time, the Capsule
+ # On Disk will be bypassed.
+ # @Prompt Enable Capsule On Disk support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleOnDiskSupport|FALSE|BOOLEAN|0x0000002d
+
+ ## Maximum permitted encapsulation levels of sections in a firmware volume,
+ # in the DXE phase. Minimum value is 1. Sections nested more deeply are
+ # rejected.
+ # @Prompt Maximum permitted FwVol section nesting depth (exclusive).
+ gEfiMdeModulePkgTokenSpaceGuid.PcdFwVolDxeMaxEncapsulationDepth|0x10|UINT32|0x00000030
+
+ ## Indicates the default timeout value for SD/MMC Host Controller operations in microseconds.
+ # @Prompt SD/MMC Host Controller Operations Timeout (us).
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSdMmcGenericTimeoutValue|1000000|UINT32|0x00000031
+
+ ## The Retry Count of AHCI command if there is a failure
+ # @Prompt The value of Retry Count, Default value is 5.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAhciCommandRetryCount|5|UINT32|0x00000032
+
[PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## This PCD defines the Console output row. The default value is 25 according to UEFI spec.
# This PCD could be set to 0 then console output would be at max column and max row.
@@ -1453,6 +1625,15 @@
# @Prompt Console Output Row of Text Setup
gEfiMdeModulePkgTokenSpaceGuid.PcdSetupConOutRow|25|UINT32|0x4000000e
+ ## Specify the Boot Discovery Policy settings
+ # To support configuring from setup page, this PCD should be overridden in DynamicHii type in its platform .dsc:
+ # gEfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy|L"BootDiscoveryPolicy"|gBootDiscoveryPolicyMgrFormsetGuid|0
+ # @Prompt Boot Discovery Policy
+ gEfiMdeModulePkgTokenSpaceGuid.PcdBootDiscoveryPolicy|2|UINT32|0x4000000f
+
+[PcdsFixedAtBuild.AARCH64, PcdsPatchableInModule.AARCH64]
+ gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiExposedTableVersions|0x20|UINT32|0x0001004c
+
[PcdsFixedAtBuild, PcdsPatchableInModule, PcdsDynamic, PcdsDynamicEx]
## UART clock frequency is for the baud rate configuration.
# @Prompt Serial Port Clock Rate.
@@ -1509,9 +1690,17 @@
# @Prompt 64-bit Base address of flash FTW working block range.
gEfiMdeModulePkgTokenSpaceGuid.PcdFlashNvStorageFtwWorkingBase64|0x0|UINT64|0x80000010
- ## This PCD defines a reserved memory range for the EMU Variable driver's NV Variable Store.
- # The range is valid if non-zero. The memory range size must be PcdVariableStoreSize.
- # @Prompt Reserved memory range for EMU variable NV storage.
+ ## Indicates if Variable driver will enable emulated variable NV mode.
+ # If this PCD is configured to dynamic, its value should be set before Variable driver starts to work,
+ # otherwise default value will take effect.
+ # TRUE - An EMU variable NV storage will be allocated or reserved for NV variables.
+ # FALSE - No EMU variable NV storage will be allocated or reserved for NV variables.
+ # @Prompt EMU variable NV mode enable.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvModeEnable|FALSE|BOOLEAN|0x01100001
+
+ ## This PCD defines the base address of reserved memory range for EMU variable NV storage.
+ # A non-ZERO value indicates a valid range reserved with size given by PcdVariableStoreSize.
+ # @Prompt Base of reserved memory range for EMU variable NV storage.
gEfiMdeModulePkgTokenSpaceGuid.PcdEmuVariableNvStoreReserved|0|UINT64|0x40000008
## This PCD defines the times to print hello world string.
@@ -1563,6 +1752,12 @@
# @Prompt Reset on memory type information change.
gEfiMdeModulePkgTokenSpaceGuid.PcdResetOnMemoryTypeInformationChange|TRUE|BOOLEAN|0x00010056
+ ## Indicates if the BDS supports Platform Recovery.
+ # TRUE - BDS supports Platform Recovery.
+ # FALSE - BDS does not support Platform Recovery.
+ # @Prompt Support Platform Recovery.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPlatformRecoverySupport|TRUE|BOOLEAN|0x00010078
+
## Specify the foreground color for Subtile text in HII Form Browser. The default value is EFI_BLUE.
# Only following values defined in UEFI specification are valid:
# 0x00 (EFI_BLACK)
@@ -1693,11 +1888,11 @@
## SMBIOS version.
# @Prompt SMBIOS version.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0301|UINT16|0x00010055
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosVersion|0x0303|UINT16|0x00010055
## SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
# @Prompt SMBIOS Docrev field in SMBIOS 3.0 (64-bit) Entry Point Structure.
- gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x1|UINT8|0x0001006A
+ gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosDocRev|0x0|UINT8|0x0001006A
## SMBIOS produce method.
# BIT0 set indicates 32-bit entry point and table are produced.
@@ -1706,9 +1901,9 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdSmbiosEntryPointProvideMethod|0x3|UINT32|0x00010069
## This PCD specifies the additional pad size in FPDT Basic Boot Performance Table for
- # the extension FPDT boot records received after ReadyToBoot and before ExitBootService.
+ # the extension FPDT boot records received after EndOfDxe and before ExitBootService.
# @Prompt Pad size for extension FPDT boot records.
- gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x0|UINT32|0x0001005F
+ gEfiMdeModulePkgTokenSpaceGuid.PcdExtFpdtBootRecordPadSize|0x30000|UINT32|0x0001005F
## Indicates if ConIn device are connected on demand.
# TRUE - ConIn device are not connected during BDS and ReadKeyStroke/ReadKeyStrokeEx produced
@@ -1756,30 +1951,6 @@
# @Prompt Flag to request system reboot after processing capsule.
gEfiMdeModulePkgTokenSpaceGuid.PcdSystemRebootAfterCapsuleProcessFlag|0x0001|UINT16|0x0000006d
- ## Publish PropertiesTable or not.
- #
- # If this PCD is TRUE, DxeCore publishs PropertiesTable.
- # DxeCore evaluates if all runtime drivers has 4K aligned PE sections. If all
- # PE sections in runtime drivers are 4K aligned, DxeCore sets BIT0 in
- # PropertiesTable. Or DxeCore clears BIT0 in PropertiesTable.
- # If this PCD is FALSE, DxeCore does not publish PropertiesTable.
- #
- # If PropertiesTable has BIT0 set, DxeCore uses below policy in UEFI memory map:
- # 1) Use EfiRuntimeServicesCode for runtime driver PE image code section and
- # use EfiRuntimeServicesData for runtime driver PE image header and other section.
- # 2) Set EfiRuntimeServicesCode to be EFI_MEMORY_RO.
- # 3) Set EfiRuntimeServicesData to be EFI_MEMORY_XP.
- # 4) Set EfiMemoryMappedIO and EfiMemoryMappedIOPortSpace to be EFI_MEMORY_XP.
- #
- # NOTE: Platform need gurantee this PCD is set correctly. Platform should set
- # this PCD to be TURE if and only if all runtime driver has seperated Code/Data
- # section. If PE code/data sections are merged, the result is unpredictable.
- #
- # UEFI 2.6 specification does not recommend to use this BIT0 attribute.
- #
- # @Prompt Publish UEFI PropertiesTable.
- gEfiMdeModulePkgTokenSpaceGuid.PcdPropertiesTableEnable|FALSE|BOOLEAN|0x0000006e
-
## Default OEM ID for ACPI table creation, its length must be 0x6 bytes to follow ACPI specification.
# @Prompt Default OEM ID for ACPI table creation.
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiDefaultOemId|"INTEL "|VOID*|0x30001034
@@ -1818,8 +1989,13 @@
# For the DxeIpl and the DxeCore are both X64, set NX for stack feature also require PcdDxeIplBuildPageTables be TRUE.
# For the DxeIpl and the DxeCore are both IA32 (PcdDxeIplSwitchToLongMode is FALSE), set NX for stack feature also require
# IA32 PAE is supported and Execute Disable Bit is available.
- # TRUE - to set NX for stack.
- # FALSE - Not to set NX for stack.
+ #
+ # TRUE - Set NX for stack.
+ # FALSE - Do nothing for stack.
+ #
+ # Note: If this PCD is set to FALSE, NX could be still applied to stack due to PcdDxeNxMemoryProtectionPolicy enabled for
+ # EfiBootServicesData.
+ #
# @Prompt Set NX for stack.
gEfiMdeModulePkgTokenSpaceGuid.PcdSetNxForStack|FALSE|BOOLEAN|0x0001006f
@@ -1836,7 +2012,7 @@
gEfiMdeModulePkgTokenSpaceGuid.PcdAcpiS3Enable|TRUE|BOOLEAN|0x01100000
## Specify memory size for boot script executor stack usage in S3 phase.
- # The default size 32K. When changing the value make sure the memory size is large enough
+ # The default size 32K. When changing the value make sure the memory size is large enough
# to meet boot script executor requirement in the S3 phase.
# @Prompt Reserved S3 Boot Script Stack ACPI Memory Size
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptStackSize|0x8000|UINT32|0x02000000
@@ -1855,6 +2031,17 @@
# @Prompt Recover file name in PEI phase
gEfiMdeModulePkgTokenSpaceGuid.PcdRecoveryFileName|L"FVMAIN.FV"|VOID*|0x30001045
+ ## This is Capsule Temp Relocation file name in PEI phase.
+ # The file must be in the root directory.
+ # The file name must be the 8.3 format.
+ # The PCD data must be in UNICODE format.
+ # CapsuleOnDiskLoadPei PEI module will set value of this PCD to PcdRecoveryFileName, then
+ # leverage recovery to get Capsule On Disk Temp Relocation file.
+ # Note: The file name must be shorter than PcdRecoveryFileName, otherwise CapsuleOnDiskLoadPei
+ # PEI module will fail to get Capsule On Disk Temp Relocation file.
+ # @Prompt Capsule On Disk Temp Relocation file name in PEI phase
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCoDRelocationFileName|L"Cod.tmp"|VOID*|0x30001048
+
## This PCD hold a list GUIDs for the ImageTypeId to indicate the
# FMP capsule is a system FMP.
# @Prompt A list of system FMP ImageTypeId GUIDs
@@ -1866,6 +2053,58 @@
# @Prompt The address mask when memory encryption is enabled.
gEfiMdeModulePkgTokenSpaceGuid.PcdPteMemoryEncryptionAddressOrMask|0x0|UINT64|0x30001047
+ ## Indicates if 5-Level Paging will be enabled in long mode. 5-Level Paging will not be enabled
+ # when the PCD is TRUE but CPU doesn't support 5-Level Paging.
+ # TRUE - 5-Level Paging will be enabled.
+ # FALSE - 5-Level Paging will not be enabled.
+ # @Prompt Enable 5-Level Paging support in long mode.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdUse5LevelPageTable|FALSE|BOOLEAN|0x0001105F
+
+ ## Capsule In Ram is to use memory to deliver the capsules that will be processed after system
+ # reset.
+ # This PCD indicates if the Capsule In Ram is supported.
+ # TRUE - Capsule In Ram is supported.
+ # FALSE - Capsule In Ram is not supported.
+ # @Prompt Enable Capsule In Ram support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCapsuleInRamSupport|TRUE|BOOLEAN|0x0000002e
+
+ ## Full device path of platform specific device to store Capsule On Disk temp relocation file.
+ # If this PCD is set, Capsule On Disk temp relocation file will be stored in the device specified
+ # by this PCD, instead of the EFI System Partition that stores capsule image file.
+ # @Prompt Capsule On Disk relocation device path.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdCodRelocationDevPath|{0xFF}|VOID*|0x0000002f
+
+ ## Indicates which TCG Platform Firmware Profile revision the EDKII firmware follows.
+ # The revision number is defined in MdePkg/Include/IndustryStandard/UefiTcgPlatform.h
+ # 0: This is for compatiblity support.
+ # 105: This is the first revision to support 800-155 is related event, such as
+ # EV_EFI_PLATFORM_FIRMWARE_BLOB2 and EV_EFI_HANDOFF_TABLES2.
+ # @Prompt TCG Platform Firmware Profile revision.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTcgPfpMeasurementRevision|0|UINT32|0x00010077
+
+ ## Indicates if StatusCode is reported via Serial port.
+ # TRUE - Reports StatusCode via Serial port.
+ # FALSE - Does not report StatusCode via Serial port.
+ # @Prompt Enable StatusCode via Serial port.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseSerial|TRUE|BOOLEAN|0x00010022
+
+ ## Indicates if StatusCode is stored in memory.
+ # The memory is boot time memory in PEI Phase and is runtime memory in DXE Phase.
+ # TRUE - Stores StatusCode in memory.
+ # FALSE - Does not store StatusCode in memory.
+ # @Prompt Enable StatusCode via memory.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdStatusCodeUseMemory|FALSE|BOOLEAN|0x00010023
+
+ ## Indicates if the PCIe Resizable BAR Capability Supported.
+ # TRUE - PCIe Resizable BAR Capability is supported.
+ # FALSE - PCIe Resizable BAR Capability is not supported.
+ # @Prompt Enable PCIe Resizable BAR Capability support.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdPcieResizableBarSupport|FALSE|BOOLEAN|0x10000024
+
+ ## This PCD holds the shared bit mask for page table entries when Tdx is enabled.
+ # @Prompt The shared bit mask when Intel Tdx is enabled.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdTdxSharedBitMask|0x0|UINT64|0x10000025
+
[PcdsPatchableInModule]
## Specify memory size with page number for PEI code when
# Loading Module at Fixed Address feature is enabled.
@@ -1912,16 +2151,19 @@
# @ValidList 0x80000001 | 0x0
gEfiMdeModulePkgTokenSpaceGuid.PcdS3BootScriptTablePrivateSmmDataPtr|0x0|UINT64|0x00030001
- ## This dynamic PCD hold an address to point to the memory of page table. The page table establishes a 1:1
- # Virtual to Physical mapping according to the processor physical address bits.
- # @Prompt Identify Mapping Page Table pointer.
- # @ValidList 0x80000001 | 0x0
- gEfiMdeModulePkgTokenSpaceGuid.PcdIdentifyMappingPageTablePtr|0x0|UINT64|0x00030002
-
## This dynamic PCD holds the information if there is any test key used by the platform.
# @Prompt If there is any test key used by the platform.
gEfiMdeModulePkgTokenSpaceGuid.PcdTestKeyUsed|FALSE|BOOLEAN|0x00030003
+ ## This dynamic PCD holds the base address of the Guest-Hypervisor Communication Block (GHCB) pool allocation.
+ # @Prompt GHCB Pool Base Address
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbBase|0|UINT64|0x00030007
+
+ ## This dynamic PCD holds the total size of the Guest-Hypervisor Communication Block (GHCB) pool allocation.
+ # The amount of memory allocated for GHCBs is dependent on the number of APs.
+ # @Prompt GHCB Pool Size
+ gEfiMdeModulePkgTokenSpaceGuid.PcdGhcbSize|0|UINT64|0x00030008
+
[PcdsDynamicEx]
## This dynamic PCD enables the default variable setting.
# Its value is the default store ID value. The default value is zero as Standard default.
@@ -1933,5 +2175,13 @@
# @Prompt NV Storage Default Value Buffer
gEfiMdeModulePkgTokenSpaceGuid.PcdNvStoreDefaultValueBuffer|{0x0}|VOID*|0x00030005
+ ## VPD type PCD allows a developer to point to an absolute physical address PcdVpdBaseAddress64
+ # to store PCD value. It will be DynamicExDefault only.
+ # It is used to set VPD region base address. So, it can't be DynamicExVpd PCD. Its value is
+ # required to be accessed in PcdDxe driver entry point. So, its value must be set in PEI phase.
+ # It can't depend on EFI variable service, and can't be DynamicExHii PCD.
+ # @Prompt 64bit VPD base address.
+ gEfiMdeModulePkgTokenSpaceGuid.PcdVpdBaseAddress64|0x0|UINT64|0x00030006
+
[UserExtensions.TianoCore."ExtraFiles"]
MdeModulePkgExtra.uni